xref: /openbmc/linux/arch/powerpc/kernel/misc_64.S (revision e290ed81) 
1/*
2 * This file contains miscellaneous low-level functions.
3 *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
4 *
5 * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
6 * and Paul Mackerras.
7 * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
8 * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
14 *
15 */
16
17#include <linux/sys.h>
18#include <asm/unistd.h>
19#include <asm/errno.h>
20#include <asm/processor.h>
21#include <asm/page.h>
22#include <asm/cache.h>
23#include <asm/ppc_asm.h>
24#include <asm/asm-offsets.h>
25#include <asm/cputable.h>
26#include <asm/thread_info.h>
27#include <asm/kexec.h>
28#include <asm/ptrace.h>
29
30	.text
31
32_GLOBAL(call_do_softirq)
33	mflr	r0
34	std	r0,16(r1)
35	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
36	mr	r1,r3
37	bl	.__do_softirq
38	ld	r1,0(r1)
39	ld	r0,16(r1)
40	mtlr	r0
41	blr
42
43_GLOBAL(call_handle_irq)
44	ld	r8,0(r6)
45	mflr	r0
46	std	r0,16(r1)
47	mtctr	r8
48	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5)
49	mr	r1,r5
50	bctrl
51	ld	r1,0(r1)
52	ld	r0,16(r1)
53	mtlr	r0
54	blr
55
56	.section	".toc","aw"
57PPC64_CACHES:
58	.tc		ppc64_caches[TC],ppc64_caches
59	.section	".text"
60
61/*
62 * Write any modified data cache blocks out to memory
63 * and invalidate the corresponding instruction cache blocks.
64 *
65 * flush_icache_range(unsigned long start, unsigned long stop)
66 *
67 *   flush all bytes from start through stop-1 inclusive
68 */
69
70_KPROBE(__flush_icache_range)
71
72/*
73 * Flush the data cache to memory
74 *
75 * Different systems have different cache line sizes
76 * and in some cases i-cache and d-cache line sizes differ from
77 * each other.
78 */
79 	ld	r10,PPC64_CACHES@toc(r2)
80	lwz	r7,DCACHEL1LINESIZE(r10)/* Get cache line size */
81	addi	r5,r7,-1
82	andc	r6,r3,r5		/* round low to line bdy */
83	subf	r8,r6,r4		/* compute length */
84	add	r8,r8,r5		/* ensure we get enough */
85	lwz	r9,DCACHEL1LOGLINESIZE(r10)	/* Get log-2 of cache line size */
86	srw.	r8,r8,r9		/* compute line count */
87	beqlr				/* nothing to do? */
88	mtctr	r8
891:	dcbst	0,r6
90	add	r6,r6,r7
91	bdnz	1b
92	sync
93
94/* Now invalidate the instruction cache */
95
96	lwz	r7,ICACHEL1LINESIZE(r10)	/* Get Icache line size */
97	addi	r5,r7,-1
98	andc	r6,r3,r5		/* round low to line bdy */
99	subf	r8,r6,r4		/* compute length */
100	add	r8,r8,r5
101	lwz	r9,ICACHEL1LOGLINESIZE(r10)	/* Get log-2 of Icache line size */
102	srw.	r8,r8,r9		/* compute line count */
103	beqlr				/* nothing to do? */
104	mtctr	r8
1052:	icbi	0,r6
106	add	r6,r6,r7
107	bdnz	2b
108	isync
109	blr
110	.previous .text
111/*
112 * Like above, but only do the D-cache.
113 *
114 * flush_dcache_range(unsigned long start, unsigned long stop)
115 *
116 *    flush all bytes from start to stop-1 inclusive
117 */
118_GLOBAL(flush_dcache_range)
119
120/*
121 * Flush the data cache to memory
122 *
123 * Different systems have different cache line sizes
124 */
125 	ld	r10,PPC64_CACHES@toc(r2)
126	lwz	r7,DCACHEL1LINESIZE(r10)	/* Get dcache line size */
127	addi	r5,r7,-1
128	andc	r6,r3,r5		/* round low to line bdy */
129	subf	r8,r6,r4		/* compute length */
130	add	r8,r8,r5		/* ensure we get enough */
131	lwz	r9,DCACHEL1LOGLINESIZE(r10)	/* Get log-2 of dcache line size */
132	srw.	r8,r8,r9		/* compute line count */
133	beqlr				/* nothing to do? */
134	mtctr	r8
1350:	dcbst	0,r6
136	add	r6,r6,r7
137	bdnz	0b
138	sync
139	blr
140
141/*
142 * Like above, but works on non-mapped physical addresses.
143 * Use only for non-LPAR setups ! It also assumes real mode
144 * is cacheable. Used for flushing out the DART before using
145 * it as uncacheable memory
146 *
147 * flush_dcache_phys_range(unsigned long start, unsigned long stop)
148 *
149 *    flush all bytes from start to stop-1 inclusive
150 */
151_GLOBAL(flush_dcache_phys_range)
152 	ld	r10,PPC64_CACHES@toc(r2)
153	lwz	r7,DCACHEL1LINESIZE(r10)	/* Get dcache line size */
154	addi	r5,r7,-1
155	andc	r6,r3,r5		/* round low to line bdy */
156	subf	r8,r6,r4		/* compute length */
157	add	r8,r8,r5		/* ensure we get enough */
158	lwz	r9,DCACHEL1LOGLINESIZE(r10)	/* Get log-2 of dcache line size */
159	srw.	r8,r8,r9		/* compute line count */
160	beqlr				/* nothing to do? */
161	mfmsr	r5			/* Disable MMU Data Relocation */
162	ori	r0,r5,MSR_DR
163	xori	r0,r0,MSR_DR
164	sync
165	mtmsr	r0
166	sync
167	isync
168	mtctr	r8
1690:	dcbst	0,r6
170	add	r6,r6,r7
171	bdnz	0b
172	sync
173	isync
174	mtmsr	r5			/* Re-enable MMU Data Relocation */
175	sync
176	isync
177	blr
178
179_GLOBAL(flush_inval_dcache_range)
180 	ld	r10,PPC64_CACHES@toc(r2)
181	lwz	r7,DCACHEL1LINESIZE(r10)	/* Get dcache line size */
182	addi	r5,r7,-1
183	andc	r6,r3,r5		/* round low to line bdy */
184	subf	r8,r6,r4		/* compute length */
185	add	r8,r8,r5		/* ensure we get enough */
186	lwz	r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */
187	srw.	r8,r8,r9		/* compute line count */
188	beqlr				/* nothing to do? */
189	sync
190	isync
191	mtctr	r8
1920:	dcbf	0,r6
193	add	r6,r6,r7
194	bdnz	0b
195	sync
196	isync
197	blr
198
199
200/*
201 * Flush a particular page from the data cache to RAM.
202 * Note: this is necessary because the instruction cache does *not*
203 * snoop from the data cache.
204 *
205 *	void __flush_dcache_icache(void *page)
206 */
207_GLOBAL(__flush_dcache_icache)
208/*
209 * Flush the data cache to memory
210 *
211 * Different systems have different cache line sizes
212 */
213
214/* Flush the dcache */
215 	ld	r7,PPC64_CACHES@toc(r2)
216	clrrdi	r3,r3,PAGE_SHIFT           	    /* Page align */
217	lwz	r4,DCACHEL1LINESPERPAGE(r7)	/* Get # dcache lines per page */
218	lwz	r5,DCACHEL1LINESIZE(r7)		/* Get dcache line size */
219	mr	r6,r3
220	mtctr	r4
2210:	dcbst	0,r6
222	add	r6,r6,r5
223	bdnz	0b
224	sync
225
226/* Now invalidate the icache */
227
228	lwz	r4,ICACHEL1LINESPERPAGE(r7)	/* Get # icache lines per page */
229	lwz	r5,ICACHEL1LINESIZE(r7)		/* Get icache line size */
230	mtctr	r4
2311:	icbi	0,r3
232	add	r3,r3,r5
233	bdnz	1b
234	isync
235	blr
236
237
238#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
239/*
240 * Do an IO access in real mode
241 */
242_GLOBAL(real_readb)
243	mfmsr	r7
244	ori	r0,r7,MSR_DR
245	xori	r0,r0,MSR_DR
246	sync
247	mtmsrd	r0
248	sync
249	isync
250	mfspr	r6,SPRN_HID4
251	rldicl	r5,r6,32,0
252	ori	r5,r5,0x100
253	rldicl	r5,r5,32,0
254	sync
255	mtspr	SPRN_HID4,r5
256	isync
257	slbia
258	isync
259	lbz	r3,0(r3)
260	sync
261	mtspr	SPRN_HID4,r6
262	isync
263	slbia
264	isync
265	mtmsrd	r7
266	sync
267	isync
268	blr
269
270	/*
271 * Do an IO access in real mode
272 */
273_GLOBAL(real_writeb)
274	mfmsr	r7
275	ori	r0,r7,MSR_DR
276	xori	r0,r0,MSR_DR
277	sync
278	mtmsrd	r0
279	sync
280	isync
281	mfspr	r6,SPRN_HID4
282	rldicl	r5,r6,32,0
283	ori	r5,r5,0x100
284	rldicl	r5,r5,32,0
285	sync
286	mtspr	SPRN_HID4,r5
287	isync
288	slbia
289	isync
290	stb	r3,0(r4)
291	sync
292	mtspr	SPRN_HID4,r6
293	isync
294	slbia
295	isync
296	mtmsrd	r7
297	sync
298	isync
299	blr
300#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
301
302#ifdef CONFIG_PPC_PASEMI
303
304/* No support in all binutils for these yet, so use defines */
305#define LBZCIX(RT,RA,RB)  .long (0x7c0006aa|(RT<<21)|(RA<<16)|(RB << 11))
306#define STBCIX(RS,RA,RB)  .long (0x7c0007aa|(RS<<21)|(RA<<16)|(RB << 11))
307
308
309_GLOBAL(real_205_readb)
310	mfmsr	r7
311	ori	r0,r7,MSR_DR
312	xori	r0,r0,MSR_DR
313	sync
314	mtmsrd	r0
315	sync
316	isync
317	LBZCIX(r3,0,r3)
318	isync
319	mtmsrd	r7
320	sync
321	isync
322	blr
323
324_GLOBAL(real_205_writeb)
325	mfmsr	r7
326	ori	r0,r7,MSR_DR
327	xori	r0,r0,MSR_DR
328	sync
329	mtmsrd	r0
330	sync
331	isync
332	STBCIX(r3,0,r4)
333	isync
334	mtmsrd	r7
335	sync
336	isync
337	blr
338
339#endif /* CONFIG_PPC_PASEMI */
340
341
342#if defined(CONFIG_CPU_FREQ_PMAC64) || defined(CONFIG_CPU_FREQ_MAPLE)
343/*
344 * SCOM access functions for 970 (FX only for now)
345 *
346 * unsigned long scom970_read(unsigned int address);
347 * void scom970_write(unsigned int address, unsigned long value);
348 *
349 * The address passed in is the 24 bits register address. This code
350 * is 970 specific and will not check the status bits, so you should
351 * know what you are doing.
352 */
353_GLOBAL(scom970_read)
354	/* interrupts off */
355	mfmsr	r4
356	ori	r0,r4,MSR_EE
357	xori	r0,r0,MSR_EE
358	mtmsrd	r0,1
359
360	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
361	 * (including parity). On current CPUs they must be 0'd,
362	 * and finally or in RW bit
363	 */
364	rlwinm	r3,r3,8,0,15
365	ori	r3,r3,0x8000
366
367	/* do the actual scom read */
368	sync
369	mtspr	SPRN_SCOMC,r3
370	isync
371	mfspr	r3,SPRN_SCOMD
372	isync
373	mfspr	r0,SPRN_SCOMC
374	isync
375
376	/* XXX:	fixup result on some buggy 970's (ouch ! we lost a bit, bah
377	 * that's the best we can do). Not implemented yet as we don't use
378	 * the scom on any of the bogus CPUs yet, but may have to be done
379	 * ultimately
380	 */
381
382	/* restore interrupts */
383	mtmsrd	r4,1
384	blr
385
386
387_GLOBAL(scom970_write)
388	/* interrupts off */
389	mfmsr	r5
390	ori	r0,r5,MSR_EE
391	xori	r0,r0,MSR_EE
392	mtmsrd	r0,1
393
394	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
395	 * (including parity). On current CPUs they must be 0'd.
396	 */
397
398	rlwinm	r3,r3,8,0,15
399
400	sync
401	mtspr	SPRN_SCOMD,r4      /* write data */
402	isync
403	mtspr	SPRN_SCOMC,r3      /* write command */
404	isync
405	mfspr	3,SPRN_SCOMC
406	isync
407
408	/* restore interrupts */
409	mtmsrd	r5,1
410	blr
411#endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */
412
413
414/*
415 * Create a kernel thread
416 *   kernel_thread(fn, arg, flags)
417 */
418_GLOBAL(kernel_thread)
419	std	r29,-24(r1)
420	std	r30,-16(r1)
421	stdu	r1,-STACK_FRAME_OVERHEAD(r1)
422	mr	r29,r3
423	mr	r30,r4
424	ori	r3,r5,CLONE_VM	/* flags */
425	oris	r3,r3,(CLONE_UNTRACED>>16)
426	li	r4,0		/* new sp (unused) */
427	li	r0,__NR_clone
428	sc
429	bns+	1f		/* did system call indicate error? */
430	neg	r3,r3		/* if so, make return code negative */
4311:	cmpdi	0,r3,0		/* parent or child? */
432	bne	2f		/* return if parent */
433	li	r0,0
434	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
435	ld	r2,8(r29)
436	ld	r29,0(r29)
437	mtlr	r29              /* fn addr in lr */
438	mr	r3,r30	        /* load arg and call fn */
439	blrl
440	li	r0,__NR_exit	/* exit after child exits */
441        li	r3,0
442	sc
4432:	addi	r1,r1,STACK_FRAME_OVERHEAD
444	ld	r29,-24(r1)
445	ld	r30,-16(r1)
446	blr
447
448/*
449 * disable_kernel_fp()
450 * Disable the FPU.
451 */
452_GLOBAL(disable_kernel_fp)
453	mfmsr	r3
454	rldicl	r0,r3,(63-MSR_FP_LG),1
455	rldicl	r3,r0,(MSR_FP_LG+1),0
456	mtmsrd	r3			/* disable use of fpu now */
457	isync
458	blr
459
460/* kexec_wait(phys_cpu)
461 *
462 * wait for the flag to change, indicating this kernel is going away but
463 * the slave code for the next one is at addresses 0 to 100.
464 *
465 * This is used by all slaves, even those that did not find a matching
466 * paca in the secondary startup code.
467 *
468 * Physical (hardware) cpu id should be in r3.
469 */
470_GLOBAL(kexec_wait)
471	bl	1f
4721:	mflr	r5
473	addi	r5,r5,kexec_flag-1b
474
47599:	HMT_LOW
476#ifdef CONFIG_KEXEC		/* use no memory without kexec */
477	lwz	r4,0(r5)
478	cmpwi	0,r4,0
479	bnea	0x60
480#endif
481	b	99b
482
483/* this can be in text because we won't change it until we are
484 * running in real anyways
485 */
486kexec_flag:
487	.long	0
488
489
490#ifdef CONFIG_KEXEC
491
492/* kexec_smp_wait(void)
493 *
494 * call with interrupts off
495 * note: this is a terminal routine, it does not save lr
496 *
497 * get phys id from paca
498 * switch to real mode
499 * mark the paca as no longer used
500 * join other cpus in kexec_wait(phys_id)
501 */
502_GLOBAL(kexec_smp_wait)
503	lhz	r3,PACAHWCPUID(r13)
504	bl	real_mode
505
506	li	r4,KEXEC_STATE_REAL_MODE
507	stb	r4,PACAKEXECSTATE(r13)
508	SYNC
509
510	b	.kexec_wait
511
512/*
513 * switch to real mode (turn mmu off)
514 * we use the early kernel trick that the hardware ignores bits
515 * 0 and 1 (big endian) of the effective address in real mode
516 *
517 * don't overwrite r3 here, it is live for kexec_wait above.
518 */
519real_mode:	/* assume normal blr return */
5201:	li	r9,MSR_RI
521	li	r10,MSR_DR|MSR_IR
522	mflr	r11		/* return address to SRR0 */
523	mfmsr	r12
524	andc	r9,r12,r9
525	andc	r10,r12,r10
526
527	mtmsrd	r9,1
528	mtspr	SPRN_SRR1,r10
529	mtspr	SPRN_SRR0,r11
530	rfid
531
532
533/*
534 * kexec_sequence(newstack, start, image, control, clear_all())
535 *
536 * does the grungy work with stack switching and real mode switches
537 * also does simple calls to other code
538 */
539
540_GLOBAL(kexec_sequence)
541	mflr	r0
542	std	r0,16(r1)
543
544	/* switch stacks to newstack -- &kexec_stack.stack */
545	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
546	mr	r1,r3
547
548	li	r0,0
549	std	r0,16(r1)
550
551	/* save regs for local vars on new stack.
552	 * yes, we won't go back, but ...
553	 */
554	std	r31,-8(r1)
555	std	r30,-16(r1)
556	std	r29,-24(r1)
557	std	r28,-32(r1)
558	std	r27,-40(r1)
559	std	r26,-48(r1)
560	std	r25,-56(r1)
561
562	stdu	r1,-STACK_FRAME_OVERHEAD-64(r1)
563
564	/* save args into preserved regs */
565	mr	r31,r3			/* newstack (both) */
566	mr	r30,r4			/* start (real) */
567	mr	r29,r5			/* image (virt) */
568	mr	r28,r6			/* control, unused */
569	mr	r27,r7			/* clear_all() fn desc */
570	mr	r26,r8			/* spare */
571	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
572
573	/* disable interrupts, we are overwriting kernel data next */
574	mfmsr	r3
575	rlwinm	r3,r3,0,17,15
576	mtmsrd	r3,1
577
578	/* copy dest pages, flush whole dest image */
579	mr	r3,r29
580	bl	.kexec_copy_flush	/* (image) */
581
582	/* turn off mmu */
583	bl	real_mode
584
585	/* copy  0x100 bytes starting at start to 0 */
586	li	r3,0
587	mr	r4,r30		/* start, aka phys mem offset */
588	li	r5,0x100
589	li	r6,0
590	bl	.copy_and_flush	/* (dest, src, copy limit, start offset) */
5911:	/* assume normal blr return */
592
593	/* release other cpus to the new kernel secondary start at 0x60 */
594	mflr	r5
595	li	r6,1
596	stw	r6,kexec_flag-1b(5)
597
598	/* clear out hardware hash page table and tlb */
599	ld	r5,0(r27)		/* deref function descriptor */
600	mtctr	r5
601	bctrl				/* ppc_md.hpte_clear_all(void); */
602
603/*
604 *   kexec image calling is:
605 *      the first 0x100 bytes of the entry point are copied to 0
606 *
607 *      all slaves branch to slave = 0x60 (absolute)
608 *              slave(phys_cpu_id);
609 *
610 *      master goes to start = entry point
611 *              start(phys_cpu_id, start, 0);
612 *
613 *
614 *   a wrapper is needed to call existing kernels, here is an approximate
615 *   description of one method:
616 *
617 * v2: (2.6.10)
618 *   start will be near the boot_block (maybe 0x100 bytes before it?)
619 *   it will have a 0x60, which will b to boot_block, where it will wait
620 *   and 0 will store phys into struct boot-block and load r3 from there,
621 *   copy kernel 0-0x100 and tell slaves to back down to 0x60 again
622 *
623 * v1: (2.6.9)
624 *    boot block will have all cpus scanning device tree to see if they
625 *    are the boot cpu ?????
626 *    other device tree differences (prop sizes, va vs pa, etc)...
627 */
628	mr	r3,r25	# my phys cpu
629	mr	r4,r30	# start, aka phys mem offset
630	mtlr	4
631	li	r5,0
632	blr	/* image->start(physid, image->start, 0); */
633#endif /* CONFIG_KEXEC */
634