xref: /openbmc/linux/arch/powerpc/kernel/misc_64.S (revision 887069f4) 
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * This file contains miscellaneous low-level functions.
4 *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
5 *
6 * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
7 * and Paul Mackerras.
8 * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
9 * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
10 */
11
12#include <linux/sys.h>
13#include <asm/unistd.h>
14#include <asm/errno.h>
15#include <asm/processor.h>
16#include <asm/page.h>
17#include <asm/cache.h>
18#include <asm/ppc_asm.h>
19#include <asm/asm-offsets.h>
20#include <asm/cputable.h>
21#include <asm/thread_info.h>
22#include <asm/kexec.h>
23#include <asm/ptrace.h>
24#include <asm/mmu.h>
25#include <asm/export.h>
26#include <asm/feature-fixups.h>
27
28	.text
29
30_GLOBAL(__bswapdi2)
31EXPORT_SYMBOL(__bswapdi2)
32	srdi	r8,r3,32
33	rlwinm	r7,r3,8,0xffffffff
34	rlwimi	r7,r3,24,0,7
35	rlwinm	r9,r8,8,0xffffffff
36	rlwimi	r7,r3,24,16,23
37	rlwimi	r9,r8,24,0,7
38	rlwimi	r9,r8,24,16,23
39	sldi	r7,r7,32
40	or	r3,r7,r9
41	blr
42
43
44#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
45_GLOBAL(rmci_on)
46	sync
47	isync
48	li	r3,0x100
49	rldicl	r3,r3,32,0
50	mfspr	r5,SPRN_HID4
51	or	r5,r5,r3
52	sync
53	mtspr	SPRN_HID4,r5
54	isync
55	slbia
56	isync
57	sync
58	blr
59
60_GLOBAL(rmci_off)
61	sync
62	isync
63	li	r3,0x100
64	rldicl	r3,r3,32,0
65	mfspr	r5,SPRN_HID4
66	andc	r5,r5,r3
67	sync
68	mtspr	SPRN_HID4,r5
69	isync
70	slbia
71	isync
72	sync
73	blr
74#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
75
76#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
77
78/*
79 * Do an IO access in real mode
80 */
81_GLOBAL(real_readb)
82	mfmsr	r7
83	ori	r0,r7,MSR_DR
84	xori	r0,r0,MSR_DR
85	sync
86	mtmsrd	r0
87	sync
88	isync
89	mfspr	r6,SPRN_HID4
90	rldicl	r5,r6,32,0
91	ori	r5,r5,0x100
92	rldicl	r5,r5,32,0
93	sync
94	mtspr	SPRN_HID4,r5
95	isync
96	slbia
97	isync
98	lbz	r3,0(r3)
99	sync
100	mtspr	SPRN_HID4,r6
101	isync
102	slbia
103	isync
104	mtmsrd	r7
105	sync
106	isync
107	blr
108
109	/*
110 * Do an IO access in real mode
111 */
112_GLOBAL(real_writeb)
113	mfmsr	r7
114	ori	r0,r7,MSR_DR
115	xori	r0,r0,MSR_DR
116	sync
117	mtmsrd	r0
118	sync
119	isync
120	mfspr	r6,SPRN_HID4
121	rldicl	r5,r6,32,0
122	ori	r5,r5,0x100
123	rldicl	r5,r5,32,0
124	sync
125	mtspr	SPRN_HID4,r5
126	isync
127	slbia
128	isync
129	stb	r3,0(r4)
130	sync
131	mtspr	SPRN_HID4,r6
132	isync
133	slbia
134	isync
135	mtmsrd	r7
136	sync
137	isync
138	blr
139#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
140
141#ifdef CONFIG_PPC_PASEMI
142
143_GLOBAL(real_205_readb)
144	mfmsr	r7
145	ori	r0,r7,MSR_DR
146	xori	r0,r0,MSR_DR
147	sync
148	mtmsrd	r0
149	sync
150	isync
151	LBZCIX(R3,R0,R3)
152	isync
153	mtmsrd	r7
154	sync
155	isync
156	blr
157
158_GLOBAL(real_205_writeb)
159	mfmsr	r7
160	ori	r0,r7,MSR_DR
161	xori	r0,r0,MSR_DR
162	sync
163	mtmsrd	r0
164	sync
165	isync
166	STBCIX(R3,R0,R4)
167	isync
168	mtmsrd	r7
169	sync
170	isync
171	blr
172
173#endif /* CONFIG_PPC_PASEMI */
174
175
176#if defined(CONFIG_CPU_FREQ_PMAC64) || defined(CONFIG_CPU_FREQ_MAPLE)
177/*
178 * SCOM access functions for 970 (FX only for now)
179 *
180 * unsigned long scom970_read(unsigned int address);
181 * void scom970_write(unsigned int address, unsigned long value);
182 *
183 * The address passed in is the 24 bits register address. This code
184 * is 970 specific and will not check the status bits, so you should
185 * know what you are doing.
186 */
187_GLOBAL(scom970_read)
188	/* interrupts off */
189	mfmsr	r4
190	ori	r0,r4,MSR_EE
191	xori	r0,r0,MSR_EE
192	mtmsrd	r0,1
193
194	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
195	 * (including parity). On current CPUs they must be 0'd,
196	 * and finally or in RW bit
197	 */
198	rlwinm	r3,r3,8,0,15
199	ori	r3,r3,0x8000
200
201	/* do the actual scom read */
202	sync
203	mtspr	SPRN_SCOMC,r3
204	isync
205	mfspr	r3,SPRN_SCOMD
206	isync
207	mfspr	r0,SPRN_SCOMC
208	isync
209
210	/* XXX:	fixup result on some buggy 970's (ouch ! we lost a bit, bah
211	 * that's the best we can do). Not implemented yet as we don't use
212	 * the scom on any of the bogus CPUs yet, but may have to be done
213	 * ultimately
214	 */
215
216	/* restore interrupts */
217	mtmsrd	r4,1
218	blr
219
220
221_GLOBAL(scom970_write)
222	/* interrupts off */
223	mfmsr	r5
224	ori	r0,r5,MSR_EE
225	xori	r0,r0,MSR_EE
226	mtmsrd	r0,1
227
228	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
229	 * (including parity). On current CPUs they must be 0'd.
230	 */
231
232	rlwinm	r3,r3,8,0,15
233
234	sync
235	mtspr	SPRN_SCOMD,r4      /* write data */
236	isync
237	mtspr	SPRN_SCOMC,r3      /* write command */
238	isync
239	mfspr	3,SPRN_SCOMC
240	isync
241
242	/* restore interrupts */
243	mtmsrd	r5,1
244	blr
245#endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */
246
247/* kexec_wait(phys_cpu)
248 *
249 * wait for the flag to change, indicating this kernel is going away but
250 * the slave code for the next one is at addresses 0 to 100.
251 *
252 * This is used by all slaves, even those that did not find a matching
253 * paca in the secondary startup code.
254 *
255 * Physical (hardware) cpu id should be in r3.
256 */
257_GLOBAL(kexec_wait)
258	bcl	20,31,$+4
2591:	mflr	r5
260	addi	r5,r5,kexec_flag-1b
261
26299:	HMT_LOW
263#ifdef CONFIG_KEXEC_CORE	/* use no memory without kexec */
264	lwz	r4,0(r5)
265	cmpwi	0,r4,0
266	beq	99b
267#ifdef CONFIG_PPC_BOOK3S_64
268	li	r10,0x60
269	mfmsr	r11
270	clrrdi	r11,r11,1	/* Clear MSR_LE */
271	mtsrr0	r10
272	mtsrr1	r11
273	rfid
274#else
275	/* Create TLB entry in book3e_secondary_core_init */
276	li	r4,0
277	ba	0x60
278#endif
279#endif
280
281/* this can be in text because we won't change it until we are
282 * running in real anyways
283 */
284kexec_flag:
285	.long	0
286
287
288#ifdef CONFIG_KEXEC_CORE
289#ifdef CONFIG_PPC_BOOK3E
290/*
291 * BOOK3E has no real MMU mode, so we have to setup the initial TLB
292 * for a core to identity map v:0 to p:0.  This current implementation
293 * assumes that 1G is enough for kexec.
294 */
295kexec_create_tlb:
296	/*
297	 * Invalidate all non-IPROT TLB entries to avoid any TLB conflict.
298	 * IPROT TLB entries should be >= PAGE_OFFSET and thus not conflict.
299	 */
300	PPC_TLBILX_ALL(0,R0)
301	sync
302	isync
303
304	mfspr	r10,SPRN_TLB1CFG
305	andi.	r10,r10,TLBnCFG_N_ENTRY	/* Extract # entries */
306	subi	r10,r10,1	/* Last entry: no conflict with kernel text */
307	lis	r9,MAS0_TLBSEL(1)@h
308	rlwimi	r9,r10,16,4,15		/* Setup MAS0 = TLBSEL | ESEL(r9) */
309
310/* Set up a temp identity mapping v:0 to p:0 and return to it. */
311	mtspr	SPRN_MAS0,r9
312
313	lis	r9,(MAS1_VALID|MAS1_IPROT)@h
314	ori	r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
315	mtspr	SPRN_MAS1,r9
316
317	LOAD_REG_IMMEDIATE(r9, 0x0 | MAS2_M_IF_NEEDED)
318	mtspr	SPRN_MAS2,r9
319
320	LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX)
321	mtspr	SPRN_MAS3,r9
322	li	r9,0
323	mtspr	SPRN_MAS7,r9
324
325	tlbwe
326	isync
327	blr
328#endif
329
330/* kexec_smp_wait(void)
331 *
332 * call with interrupts off
333 * note: this is a terminal routine, it does not save lr
334 *
335 * get phys id from paca
336 * switch to real mode
337 * mark the paca as no longer used
338 * join other cpus in kexec_wait(phys_id)
339 */
340_GLOBAL(kexec_smp_wait)
341	lhz	r3,PACAHWCPUID(r13)
342	bl	real_mode
343
344	li	r4,KEXEC_STATE_REAL_MODE
345	stb	r4,PACAKEXECSTATE(r13)
346
347	b	kexec_wait
348
349/*
350 * switch to real mode (turn mmu off)
351 * we use the early kernel trick that the hardware ignores bits
352 * 0 and 1 (big endian) of the effective address in real mode
353 *
354 * don't overwrite r3 here, it is live for kexec_wait above.
355 */
356real_mode:	/* assume normal blr return */
357#ifdef CONFIG_PPC_BOOK3E
358	/* Create an identity mapping. */
359	b	kexec_create_tlb
360#else
3611:	li	r9,MSR_RI
362	li	r10,MSR_DR|MSR_IR
363	mflr	r11		/* return address to SRR0 */
364	mfmsr	r12
365	andc	r9,r12,r9
366	andc	r10,r12,r10
367
368	mtmsrd	r9,1
369	mtspr	SPRN_SRR1,r10
370	mtspr	SPRN_SRR0,r11
371	rfid
372#endif
373
374/*
375 * kexec_sequence(newstack, start, image, control, clear_all(),
376	          copy_with_mmu_off)
377 *
378 * does the grungy work with stack switching and real mode switches
379 * also does simple calls to other code
380 */
381
382_GLOBAL(kexec_sequence)
383	mflr	r0
384	std	r0,16(r1)
385
386	/* switch stacks to newstack -- &kexec_stack.stack */
387	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
388	mr	r1,r3
389
390	li	r0,0
391	std	r0,16(r1)
392
393	/* save regs for local vars on new stack.
394	 * yes, we won't go back, but ...
395	 */
396	std	r31,-8(r1)
397	std	r30,-16(r1)
398	std	r29,-24(r1)
399	std	r28,-32(r1)
400	std	r27,-40(r1)
401	std	r26,-48(r1)
402	std	r25,-56(r1)
403
404	stdu	r1,-STACK_FRAME_OVERHEAD-64(r1)
405
406	/* save args into preserved regs */
407	mr	r31,r3			/* newstack (both) */
408	mr	r30,r4			/* start (real) */
409	mr	r29,r5			/* image (virt) */
410	mr	r28,r6			/* control, unused */
411	mr	r27,r7			/* clear_all() fn desc */
412	mr	r26,r8			/* copy_with_mmu_off */
413	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
414
415	/* disable interrupts, we are overwriting kernel data next */
416#ifdef CONFIG_PPC_BOOK3E
417	wrteei	0
418#else
419	mfmsr	r3
420	rlwinm	r3,r3,0,17,15
421	mtmsrd	r3,1
422#endif
423
424	/* We need to turn the MMU off unless we are in hash mode
425	 * under a hypervisor
426	 */
427	cmpdi	r26,0
428	beq	1f
429	bl	real_mode
4301:
431	/* copy dest pages, flush whole dest image */
432	mr	r3,r29
433	bl	kexec_copy_flush	/* (image) */
434
435	/* turn off mmu now if not done earlier */
436	cmpdi	r26,0
437	bne	1f
438	bl	real_mode
439
440	/* copy  0x100 bytes starting at start to 0 */
4411:	li	r3,0
442	mr	r4,r30		/* start, aka phys mem offset */
443	li	r5,0x100
444	li	r6,0
445	bl	copy_and_flush	/* (dest, src, copy limit, start offset) */
4461:	/* assume normal blr return */
447
448	/* release other cpus to the new kernel secondary start at 0x60 */
449	mflr	r5
450	li	r6,1
451	stw	r6,kexec_flag-1b(5)
452
453	cmpdi	r27,0
454	beq	1f
455
456	/* clear out hardware hash page table and tlb */
457#ifdef PPC64_ELF_ABI_v1
458	ld	r12,0(r27)		/* deref function descriptor */
459#else
460	mr	r12,r27
461#endif
462	mtctr	r12
463	bctrl				/* mmu_hash_ops.hpte_clear_all(void); */
464
465/*
466 *   kexec image calling is:
467 *      the first 0x100 bytes of the entry point are copied to 0
468 *
469 *      all slaves branch to slave = 0x60 (absolute)
470 *              slave(phys_cpu_id);
471 *
472 *      master goes to start = entry point
473 *              start(phys_cpu_id, start, 0);
474 *
475 *
476 *   a wrapper is needed to call existing kernels, here is an approximate
477 *   description of one method:
478 *
479 * v2: (2.6.10)
480 *   start will be near the boot_block (maybe 0x100 bytes before it?)
481 *   it will have a 0x60, which will b to boot_block, where it will wait
482 *   and 0 will store phys into struct boot-block and load r3 from there,
483 *   copy kernel 0-0x100 and tell slaves to back down to 0x60 again
484 *
485 * v1: (2.6.9)
486 *    boot block will have all cpus scanning device tree to see if they
487 *    are the boot cpu ?????
488 *    other device tree differences (prop sizes, va vs pa, etc)...
489 */
4901:	mr	r3,r25	# my phys cpu
491	mr	r4,r30	# start, aka phys mem offset
492	mtlr	4
493	li	r5,0
494	blr	/* image->start(physid, image->start, 0); */
495#endif /* CONFIG_KEXEC_CORE */
496