xref: /openbmc/linux/arch/powerpc/kernel/misc_64.S (revision 8365a898) 
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * This file contains miscellaneous low-level functions.
4 *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
5 *
6 * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
7 * and Paul Mackerras.
8 * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
9 * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
10 */
11
12#include <linux/sys.h>
13#include <asm/unistd.h>
14#include <asm/errno.h>
15#include <asm/processor.h>
16#include <asm/page.h>
17#include <asm/cache.h>
18#include <asm/ppc_asm.h>
19#include <asm/asm-offsets.h>
20#include <asm/cputable.h>
21#include <asm/thread_info.h>
22#include <asm/kexec.h>
23#include <asm/ptrace.h>
24#include <asm/mmu.h>
25#include <asm/export.h>
26#include <asm/feature-fixups.h>
27
28	.text
29
30_GLOBAL(call_do_softirq)
31	mflr	r0
32	std	r0,16(r1)
33	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
34	mr	r1,r3
35	bl	__do_softirq
36	ld	r1,0(r1)
37	ld	r0,16(r1)
38	mtlr	r0
39	blr
40
41_GLOBAL(call_do_irq)
42	mflr	r0
43	std	r0,16(r1)
44	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
45	mr	r1,r4
46	bl	__do_irq
47	ld	r1,0(r1)
48	ld	r0,16(r1)
49	mtlr	r0
50	blr
51
52_GLOBAL(__bswapdi2)
53EXPORT_SYMBOL(__bswapdi2)
54	srdi	r8,r3,32
55	rlwinm	r7,r3,8,0xffffffff
56	rlwimi	r7,r3,24,0,7
57	rlwinm	r9,r8,8,0xffffffff
58	rlwimi	r7,r3,24,16,23
59	rlwimi	r9,r8,24,0,7
60	rlwimi	r9,r8,24,16,23
61	sldi	r7,r7,32
62	or	r3,r7,r9
63	blr
64
65
66#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
67_GLOBAL(rmci_on)
68	sync
69	isync
70	li	r3,0x100
71	rldicl	r3,r3,32,0
72	mfspr	r5,SPRN_HID4
73	or	r5,r5,r3
74	sync
75	mtspr	SPRN_HID4,r5
76	isync
77	slbia
78	isync
79	sync
80	blr
81
82_GLOBAL(rmci_off)
83	sync
84	isync
85	li	r3,0x100
86	rldicl	r3,r3,32,0
87	mfspr	r5,SPRN_HID4
88	andc	r5,r5,r3
89	sync
90	mtspr	SPRN_HID4,r5
91	isync
92	slbia
93	isync
94	sync
95	blr
96#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
97
98#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
99
100/*
101 * Do an IO access in real mode
102 */
103_GLOBAL(real_readb)
104	mfmsr	r7
105	ori	r0,r7,MSR_DR
106	xori	r0,r0,MSR_DR
107	sync
108	mtmsrd	r0
109	sync
110	isync
111	mfspr	r6,SPRN_HID4
112	rldicl	r5,r6,32,0
113	ori	r5,r5,0x100
114	rldicl	r5,r5,32,0
115	sync
116	mtspr	SPRN_HID4,r5
117	isync
118	slbia
119	isync
120	lbz	r3,0(r3)
121	sync
122	mtspr	SPRN_HID4,r6
123	isync
124	slbia
125	isync
126	mtmsrd	r7
127	sync
128	isync
129	blr
130
131	/*
132 * Do an IO access in real mode
133 */
134_GLOBAL(real_writeb)
135	mfmsr	r7
136	ori	r0,r7,MSR_DR
137	xori	r0,r0,MSR_DR
138	sync
139	mtmsrd	r0
140	sync
141	isync
142	mfspr	r6,SPRN_HID4
143	rldicl	r5,r6,32,0
144	ori	r5,r5,0x100
145	rldicl	r5,r5,32,0
146	sync
147	mtspr	SPRN_HID4,r5
148	isync
149	slbia
150	isync
151	stb	r3,0(r4)
152	sync
153	mtspr	SPRN_HID4,r6
154	isync
155	slbia
156	isync
157	mtmsrd	r7
158	sync
159	isync
160	blr
161#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
162
163#ifdef CONFIG_PPC_PASEMI
164
165_GLOBAL(real_205_readb)
166	mfmsr	r7
167	ori	r0,r7,MSR_DR
168	xori	r0,r0,MSR_DR
169	sync
170	mtmsrd	r0
171	sync
172	isync
173	LBZCIX(R3,R0,R3)
174	isync
175	mtmsrd	r7
176	sync
177	isync
178	blr
179
180_GLOBAL(real_205_writeb)
181	mfmsr	r7
182	ori	r0,r7,MSR_DR
183	xori	r0,r0,MSR_DR
184	sync
185	mtmsrd	r0
186	sync
187	isync
188	STBCIX(R3,R0,R4)
189	isync
190	mtmsrd	r7
191	sync
192	isync
193	blr
194
195#endif /* CONFIG_PPC_PASEMI */
196
197
198#if defined(CONFIG_CPU_FREQ_PMAC64) || defined(CONFIG_CPU_FREQ_MAPLE)
199/*
200 * SCOM access functions for 970 (FX only for now)
201 *
202 * unsigned long scom970_read(unsigned int address);
203 * void scom970_write(unsigned int address, unsigned long value);
204 *
205 * The address passed in is the 24 bits register address. This code
206 * is 970 specific and will not check the status bits, so you should
207 * know what you are doing.
208 */
209_GLOBAL(scom970_read)
210	/* interrupts off */
211	mfmsr	r4
212	ori	r0,r4,MSR_EE
213	xori	r0,r0,MSR_EE
214	mtmsrd	r0,1
215
216	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
217	 * (including parity). On current CPUs they must be 0'd,
218	 * and finally or in RW bit
219	 */
220	rlwinm	r3,r3,8,0,15
221	ori	r3,r3,0x8000
222
223	/* do the actual scom read */
224	sync
225	mtspr	SPRN_SCOMC,r3
226	isync
227	mfspr	r3,SPRN_SCOMD
228	isync
229	mfspr	r0,SPRN_SCOMC
230	isync
231
232	/* XXX:	fixup result on some buggy 970's (ouch ! we lost a bit, bah
233	 * that's the best we can do). Not implemented yet as we don't use
234	 * the scom on any of the bogus CPUs yet, but may have to be done
235	 * ultimately
236	 */
237
238	/* restore interrupts */
239	mtmsrd	r4,1
240	blr
241
242
243_GLOBAL(scom970_write)
244	/* interrupts off */
245	mfmsr	r5
246	ori	r0,r5,MSR_EE
247	xori	r0,r0,MSR_EE
248	mtmsrd	r0,1
249
250	/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
251	 * (including parity). On current CPUs they must be 0'd.
252	 */
253
254	rlwinm	r3,r3,8,0,15
255
256	sync
257	mtspr	SPRN_SCOMD,r4      /* write data */
258	isync
259	mtspr	SPRN_SCOMC,r3      /* write command */
260	isync
261	mfspr	3,SPRN_SCOMC
262	isync
263
264	/* restore interrupts */
265	mtmsrd	r5,1
266	blr
267#endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */
268
269/* kexec_wait(phys_cpu)
270 *
271 * wait for the flag to change, indicating this kernel is going away but
272 * the slave code for the next one is at addresses 0 to 100.
273 *
274 * This is used by all slaves, even those that did not find a matching
275 * paca in the secondary startup code.
276 *
277 * Physical (hardware) cpu id should be in r3.
278 */
279_GLOBAL(kexec_wait)
280	bl	1f
2811:	mflr	r5
282	addi	r5,r5,kexec_flag-1b
283
28499:	HMT_LOW
285#ifdef CONFIG_KEXEC_CORE	/* use no memory without kexec */
286	lwz	r4,0(r5)
287	cmpwi	0,r4,0
288	beq	99b
289#ifdef CONFIG_PPC_BOOK3S_64
290	li	r10,0x60
291	mfmsr	r11
292	clrrdi	r11,r11,1	/* Clear MSR_LE */
293	mtsrr0	r10
294	mtsrr1	r11
295	rfid
296#else
297	/* Create TLB entry in book3e_secondary_core_init */
298	li	r4,0
299	ba	0x60
300#endif
301#endif
302
303/* this can be in text because we won't change it until we are
304 * running in real anyways
305 */
306kexec_flag:
307	.long	0
308
309
310#ifdef CONFIG_KEXEC_CORE
311#ifdef CONFIG_PPC_BOOK3E
312/*
313 * BOOK3E has no real MMU mode, so we have to setup the initial TLB
314 * for a core to identity map v:0 to p:0.  This current implementation
315 * assumes that 1G is enough for kexec.
316 */
317kexec_create_tlb:
318	/*
319	 * Invalidate all non-IPROT TLB entries to avoid any TLB conflict.
320	 * IPROT TLB entries should be >= PAGE_OFFSET and thus not conflict.
321	 */
322	PPC_TLBILX_ALL(0,R0)
323	sync
324	isync
325
326	mfspr	r10,SPRN_TLB1CFG
327	andi.	r10,r10,TLBnCFG_N_ENTRY	/* Extract # entries */
328	subi	r10,r10,1	/* Last entry: no conflict with kernel text */
329	lis	r9,MAS0_TLBSEL(1)@h
330	rlwimi	r9,r10,16,4,15		/* Setup MAS0 = TLBSEL | ESEL(r9) */
331
332/* Set up a temp identity mapping v:0 to p:0 and return to it. */
333	mtspr	SPRN_MAS0,r9
334
335	lis	r9,(MAS1_VALID|MAS1_IPROT)@h
336	ori	r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
337	mtspr	SPRN_MAS1,r9
338
339	LOAD_REG_IMMEDIATE(r9, 0x0 | MAS2_M_IF_NEEDED)
340	mtspr	SPRN_MAS2,r9
341
342	LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX)
343	mtspr	SPRN_MAS3,r9
344	li	r9,0
345	mtspr	SPRN_MAS7,r9
346
347	tlbwe
348	isync
349	blr
350#endif
351
352/* kexec_smp_wait(void)
353 *
354 * call with interrupts off
355 * note: this is a terminal routine, it does not save lr
356 *
357 * get phys id from paca
358 * switch to real mode
359 * mark the paca as no longer used
360 * join other cpus in kexec_wait(phys_id)
361 */
362_GLOBAL(kexec_smp_wait)
363	lhz	r3,PACAHWCPUID(r13)
364	bl	real_mode
365
366	li	r4,KEXEC_STATE_REAL_MODE
367	stb	r4,PACAKEXECSTATE(r13)
368	SYNC
369
370	b	kexec_wait
371
372/*
373 * switch to real mode (turn mmu off)
374 * we use the early kernel trick that the hardware ignores bits
375 * 0 and 1 (big endian) of the effective address in real mode
376 *
377 * don't overwrite r3 here, it is live for kexec_wait above.
378 */
379real_mode:	/* assume normal blr return */
380#ifdef CONFIG_PPC_BOOK3E
381	/* Create an identity mapping. */
382	b	kexec_create_tlb
383#else
3841:	li	r9,MSR_RI
385	li	r10,MSR_DR|MSR_IR
386	mflr	r11		/* return address to SRR0 */
387	mfmsr	r12
388	andc	r9,r12,r9
389	andc	r10,r12,r10
390
391	mtmsrd	r9,1
392	mtspr	SPRN_SRR1,r10
393	mtspr	SPRN_SRR0,r11
394	rfid
395#endif
396
397/*
398 * kexec_sequence(newstack, start, image, control, clear_all(),
399	          copy_with_mmu_off)
400 *
401 * does the grungy work with stack switching and real mode switches
402 * also does simple calls to other code
403 */
404
405_GLOBAL(kexec_sequence)
406	mflr	r0
407	std	r0,16(r1)
408
409	/* switch stacks to newstack -- &kexec_stack.stack */
410	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
411	mr	r1,r3
412
413	li	r0,0
414	std	r0,16(r1)
415
416BEGIN_FTR_SECTION
417	/*
418	 * This is the best time to turn AMR/IAMR off.
419	 * key 0 is used in radix for supervisor<->user
420	 * protection, but on hash key 0 is reserved
421	 * ideally we want to enter with a clean state.
422	 * NOTE, we rely on r0 being 0 from above.
423	 */
424	mtspr	SPRN_IAMR,r0
425BEGIN_FTR_SECTION_NESTED(42)
426	mtspr	SPRN_AMOR,r0
427END_FTR_SECTION_NESTED_IFSET(CPU_FTR_HVMODE, 42)
428END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
429
430	/* save regs for local vars on new stack.
431	 * yes, we won't go back, but ...
432	 */
433	std	r31,-8(r1)
434	std	r30,-16(r1)
435	std	r29,-24(r1)
436	std	r28,-32(r1)
437	std	r27,-40(r1)
438	std	r26,-48(r1)
439	std	r25,-56(r1)
440
441	stdu	r1,-STACK_FRAME_OVERHEAD-64(r1)
442
443	/* save args into preserved regs */
444	mr	r31,r3			/* newstack (both) */
445	mr	r30,r4			/* start (real) */
446	mr	r29,r5			/* image (virt) */
447	mr	r28,r6			/* control, unused */
448	mr	r27,r7			/* clear_all() fn desc */
449	mr	r26,r8			/* copy_with_mmu_off */
450	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
451
452	/* disable interrupts, we are overwriting kernel data next */
453#ifdef CONFIG_PPC_BOOK3E
454	wrteei	0
455#else
456	mfmsr	r3
457	rlwinm	r3,r3,0,17,15
458	mtmsrd	r3,1
459#endif
460
461	/* We need to turn the MMU off unless we are in hash mode
462	 * under a hypervisor
463	 */
464	cmpdi	r26,0
465	beq	1f
466	bl	real_mode
4671:
468	/* copy dest pages, flush whole dest image */
469	mr	r3,r29
470	bl	kexec_copy_flush	/* (image) */
471
472	/* turn off mmu now if not done earlier */
473	cmpdi	r26,0
474	bne	1f
475	bl	real_mode
476
477	/* copy  0x100 bytes starting at start to 0 */
4781:	li	r3,0
479	mr	r4,r30		/* start, aka phys mem offset */
480	li	r5,0x100
481	li	r6,0
482	bl	copy_and_flush	/* (dest, src, copy limit, start offset) */
4831:	/* assume normal blr return */
484
485	/* release other cpus to the new kernel secondary start at 0x60 */
486	mflr	r5
487	li	r6,1
488	stw	r6,kexec_flag-1b(5)
489
490	cmpdi	r27,0
491	beq	1f
492
493	/* clear out hardware hash page table and tlb */
494#ifdef PPC64_ELF_ABI_v1
495	ld	r12,0(r27)		/* deref function descriptor */
496#else
497	mr	r12,r27
498#endif
499	mtctr	r12
500	bctrl				/* mmu_hash_ops.hpte_clear_all(void); */
501
502/*
503 *   kexec image calling is:
504 *      the first 0x100 bytes of the entry point are copied to 0
505 *
506 *      all slaves branch to slave = 0x60 (absolute)
507 *              slave(phys_cpu_id);
508 *
509 *      master goes to start = entry point
510 *              start(phys_cpu_id, start, 0);
511 *
512 *
513 *   a wrapper is needed to call existing kernels, here is an approximate
514 *   description of one method:
515 *
516 * v2: (2.6.10)
517 *   start will be near the boot_block (maybe 0x100 bytes before it?)
518 *   it will have a 0x60, which will b to boot_block, where it will wait
519 *   and 0 will store phys into struct boot-block and load r3 from there,
520 *   copy kernel 0-0x100 and tell slaves to back down to 0x60 again
521 *
522 * v1: (2.6.9)
523 *    boot block will have all cpus scanning device tree to see if they
524 *    are the boot cpu ?????
525 *    other device tree differences (prop sizes, va vs pa, etc)...
526 */
5271:	mr	r3,r25	# my phys cpu
528	mr	r4,r30	# start, aka phys mem offset
529	mtlr	4
530	li	r5,0
531	blr	/* image->start(physid, image->start, 0); */
532#endif /* CONFIG_KEXEC_CORE */
533