xref: /openbmc/linux/arch/powerpc/kernel/irq.c (revision d0b73b48)
1 /*
2  *  Derived from arch/i386/kernel/irq.c
3  *    Copyright (C) 1992 Linus Torvalds
4  *  Adapted from arch/i386 by Gary Thomas
5  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
6  *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
7  *    Copyright (C) 1996-2001 Cort Dougan
8  *  Adapted for Power Macintosh by Paul Mackerras
9  *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License
13  * as published by the Free Software Foundation; either version
14  * 2 of the License, or (at your option) any later version.
15  *
16  * This file contains the code used by various IRQ handling routines:
17  * asking for different IRQ's should be done through these routines
18  * instead of just grabbing them. Thus setups with different IRQ numbers
19  * shouldn't result in any weird surprises, and installing new handlers
20  * should be easier.
21  *
22  * The MPC8xx has an interrupt mask in the SIU.  If a bit is set, the
23  * interrupt is _enabled_.  As expected, IRQ0 is bit 0 in the 32-bit
24  * mask register (of which only 16 are defined), hence the weird shifting
25  * and complement of the cached_irq_mask.  I want to be able to stuff
26  * this right into the SIU SMASK register.
27  * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx
28  * to reduce code space and undefined function references.
29  */
30 
31 #undef DEBUG
32 
33 #include <linux/export.h>
34 #include <linux/threads.h>
35 #include <linux/kernel_stat.h>
36 #include <linux/signal.h>
37 #include <linux/sched.h>
38 #include <linux/ptrace.h>
39 #include <linux/ioport.h>
40 #include <linux/interrupt.h>
41 #include <linux/timex.h>
42 #include <linux/init.h>
43 #include <linux/slab.h>
44 #include <linux/delay.h>
45 #include <linux/irq.h>
46 #include <linux/seq_file.h>
47 #include <linux/cpumask.h>
48 #include <linux/profile.h>
49 #include <linux/bitops.h>
50 #include <linux/list.h>
51 #include <linux/radix-tree.h>
52 #include <linux/mutex.h>
53 #include <linux/bootmem.h>
54 #include <linux/pci.h>
55 #include <linux/debugfs.h>
56 #include <linux/of.h>
57 #include <linux/of_irq.h>
58 
59 #include <asm/uaccess.h>
60 #include <asm/io.h>
61 #include <asm/pgtable.h>
62 #include <asm/irq.h>
63 #include <asm/cache.h>
64 #include <asm/prom.h>
65 #include <asm/ptrace.h>
66 #include <asm/machdep.h>
67 #include <asm/udbg.h>
68 #include <asm/smp.h>
69 #include <asm/debug.h>
70 
71 #ifdef CONFIG_PPC64
72 #include <asm/paca.h>
73 #include <asm/firmware.h>
74 #include <asm/lv1call.h>
75 #endif
76 #define CREATE_TRACE_POINTS
77 #include <asm/trace.h>
78 
79 DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
80 EXPORT_PER_CPU_SYMBOL(irq_stat);
81 
82 int __irq_offset_value;
83 
84 #ifdef CONFIG_PPC32
85 EXPORT_SYMBOL(__irq_offset_value);
86 atomic_t ppc_n_lost_interrupts;
87 
88 #ifdef CONFIG_TAU_INT
89 extern int tau_initialized;
90 extern int tau_interrupts(int);
91 #endif
92 #endif /* CONFIG_PPC32 */
93 
94 #ifdef CONFIG_PPC64
95 
96 int distribute_irqs = 1;
97 
98 static inline notrace unsigned long get_irq_happened(void)
99 {
100 	unsigned long happened;
101 
102 	__asm__ __volatile__("lbz %0,%1(13)"
103 	: "=r" (happened) : "i" (offsetof(struct paca_struct, irq_happened)));
104 
105 	return happened;
106 }
107 
108 static inline notrace void set_soft_enabled(unsigned long enable)
109 {
110 	__asm__ __volatile__("stb %0,%1(13)"
111 	: : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled)));
112 }
113 
114 static inline notrace int decrementer_check_overflow(void)
115 {
116  	u64 now = get_tb_or_rtc();
117  	u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
118 
119 	if (now >= *next_tb)
120 		set_dec(1);
121 	return now >= *next_tb;
122 }
123 
124 /* This is called whenever we are re-enabling interrupts
125  * and returns either 0 (nothing to do) or 500/900 if there's
126  * either an EE or a DEC to generate.
127  *
128  * This is called in two contexts: From arch_local_irq_restore()
129  * before soft-enabling interrupts, and from the exception exit
130  * path when returning from an interrupt from a soft-disabled to
131  * a soft enabled context. In both case we have interrupts hard
132  * disabled.
133  *
134  * We take care of only clearing the bits we handled in the
135  * PACA irq_happened field since we can only re-emit one at a
136  * time and we don't want to "lose" one.
137  */
138 notrace unsigned int __check_irq_replay(void)
139 {
140 	/*
141 	 * We use local_paca rather than get_paca() to avoid all
142 	 * the debug_smp_processor_id() business in this low level
143 	 * function
144 	 */
145 	unsigned char happened = local_paca->irq_happened;
146 
147 	/* Clear bit 0 which we wouldn't clear otherwise */
148 	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
149 
150 	/*
151 	 * Force the delivery of pending soft-disabled interrupts on PS3.
152 	 * Any HV call will have this side effect.
153 	 */
154 	if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
155 		u64 tmp, tmp2;
156 		lv1_get_version_info(&tmp, &tmp2);
157 	}
158 
159 	/*
160 	 * We may have missed a decrementer interrupt. We check the
161 	 * decrementer itself rather than the paca irq_happened field
162 	 * in case we also had a rollover while hard disabled
163 	 */
164 	local_paca->irq_happened &= ~PACA_IRQ_DEC;
165 	if (decrementer_check_overflow())
166 		return 0x900;
167 
168 	/* Finally check if an external interrupt happened */
169 	local_paca->irq_happened &= ~PACA_IRQ_EE;
170 	if (happened & PACA_IRQ_EE)
171 		return 0x500;
172 
173 #ifdef CONFIG_PPC_BOOK3E
174 	/* Finally check if an EPR external interrupt happened
175 	 * this bit is typically set if we need to handle another
176 	 * "edge" interrupt from within the MPIC "EPR" handler
177 	 */
178 	local_paca->irq_happened &= ~PACA_IRQ_EE_EDGE;
179 	if (happened & PACA_IRQ_EE_EDGE)
180 		return 0x500;
181 
182 	local_paca->irq_happened &= ~PACA_IRQ_DBELL;
183 	if (happened & PACA_IRQ_DBELL)
184 		return 0x280;
185 #endif /* CONFIG_PPC_BOOK3E */
186 
187 	/* There should be nothing left ! */
188 	BUG_ON(local_paca->irq_happened != 0);
189 
190 	return 0;
191 }
192 
193 notrace void arch_local_irq_restore(unsigned long en)
194 {
195 	unsigned char irq_happened;
196 	unsigned int replay;
197 
198 	/* Write the new soft-enabled value */
199 	set_soft_enabled(en);
200 	if (!en)
201 		return;
202 	/*
203 	 * From this point onward, we can take interrupts, preempt,
204 	 * etc... unless we got hard-disabled. We check if an event
205 	 * happened. If none happened, we know we can just return.
206 	 *
207 	 * We may have preempted before the check below, in which case
208 	 * we are checking the "new" CPU instead of the old one. This
209 	 * is only a problem if an event happened on the "old" CPU.
210 	 *
211 	 * External interrupt events will have caused interrupts to
212 	 * be hard-disabled, so there is no problem, we
213 	 * cannot have preempted.
214 	 */
215 	irq_happened = get_irq_happened();
216 	if (!irq_happened)
217 		return;
218 
219 	/*
220 	 * We need to hard disable to get a trusted value from
221 	 * __check_irq_replay(). We also need to soft-disable
222 	 * again to avoid warnings in there due to the use of
223 	 * per-cpu variables.
224 	 *
225 	 * We know that if the value in irq_happened is exactly 0x01
226 	 * then we are already hard disabled (there are other less
227 	 * common cases that we'll ignore for now), so we skip the
228 	 * (expensive) mtmsrd.
229 	 */
230 	if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
231 		__hard_irq_disable();
232 #ifdef CONFIG_TRACE_IRQFLAGS
233 	else {
234 		/*
235 		 * We should already be hard disabled here. We had bugs
236 		 * where that wasn't the case so let's dbl check it and
237 		 * warn if we are wrong. Only do that when IRQ tracing
238 		 * is enabled as mfmsr() can be costly.
239 		 */
240 		if (WARN_ON(mfmsr() & MSR_EE))
241 			__hard_irq_disable();
242 	}
243 #endif /* CONFIG_TRACE_IRQFLAG */
244 
245 	set_soft_enabled(0);
246 
247 	/*
248 	 * Check if anything needs to be re-emitted. We haven't
249 	 * soft-enabled yet to avoid warnings in decrementer_check_overflow
250 	 * accessing per-cpu variables
251 	 */
252 	replay = __check_irq_replay();
253 
254 	/* We can soft-enable now */
255 	set_soft_enabled(1);
256 
257 	/*
258 	 * And replay if we have to. This will return with interrupts
259 	 * hard-enabled.
260 	 */
261 	if (replay) {
262 		__replay_interrupt(replay);
263 		return;
264 	}
265 
266 	/* Finally, let's ensure we are hard enabled */
267 	__hard_irq_enable();
268 }
269 EXPORT_SYMBOL(arch_local_irq_restore);
270 
271 /*
272  * This is specifically called by assembly code to re-enable interrupts
273  * if they are currently disabled. This is typically called before
274  * schedule() or do_signal() when returning to userspace. We do it
275  * in C to avoid the burden of dealing with lockdep etc...
276  *
277  * NOTE: This is called with interrupts hard disabled but not marked
278  * as such in paca->irq_happened, so we need to resync this.
279  */
280 void notrace restore_interrupts(void)
281 {
282 	if (irqs_disabled()) {
283 		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
284 		local_irq_enable();
285 	} else
286 		__hard_irq_enable();
287 }
288 
289 /*
290  * This is a helper to use when about to go into idle low-power
291  * when the latter has the side effect of re-enabling interrupts
292  * (such as calling H_CEDE under pHyp).
293  *
294  * You call this function with interrupts soft-disabled (this is
295  * already the case when ppc_md.power_save is called). The function
296  * will return whether to enter power save or just return.
297  *
298  * In the former case, it will have notified lockdep of interrupts
299  * being re-enabled and generally sanitized the lazy irq state,
300  * and in the latter case it will leave with interrupts hard
301  * disabled and marked as such, so the local_irq_enable() call
302  * in cpu_idle() will properly re-enable everything.
303  */
304 bool prep_irq_for_idle(void)
305 {
306 	/*
307 	 * First we need to hard disable to ensure no interrupt
308 	 * occurs before we effectively enter the low power state
309 	 */
310 	hard_irq_disable();
311 
312 	/*
313 	 * If anything happened while we were soft-disabled,
314 	 * we return now and do not enter the low power state.
315 	 */
316 	if (lazy_irq_pending())
317 		return false;
318 
319 	/* Tell lockdep we are about to re-enable */
320 	trace_hardirqs_on();
321 
322 	/*
323 	 * Mark interrupts as soft-enabled and clear the
324 	 * PACA_IRQ_HARD_DIS from the pending mask since we
325 	 * are about to hard enable as well as a side effect
326 	 * of entering the low power state.
327 	 */
328 	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
329 	local_paca->soft_enabled = 1;
330 
331 	/* Tell the caller to enter the low power state */
332 	return true;
333 }
334 
335 #endif /* CONFIG_PPC64 */
336 
337 int arch_show_interrupts(struct seq_file *p, int prec)
338 {
339 	int j;
340 
341 #if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
342 	if (tau_initialized) {
343 		seq_printf(p, "%*s: ", prec, "TAU");
344 		for_each_online_cpu(j)
345 			seq_printf(p, "%10u ", tau_interrupts(j));
346 		seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
347 	}
348 #endif /* CONFIG_PPC32 && CONFIG_TAU_INT */
349 
350 	seq_printf(p, "%*s: ", prec, "LOC");
351 	for_each_online_cpu(j)
352 		seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs);
353         seq_printf(p, "  Local timer interrupts\n");
354 
355 	seq_printf(p, "%*s: ", prec, "SPU");
356 	for_each_online_cpu(j)
357 		seq_printf(p, "%10u ", per_cpu(irq_stat, j).spurious_irqs);
358 	seq_printf(p, "  Spurious interrupts\n");
359 
360 	seq_printf(p, "%*s: ", prec, "CNT");
361 	for_each_online_cpu(j)
362 		seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs);
363 	seq_printf(p, "  Performance monitoring interrupts\n");
364 
365 	seq_printf(p, "%*s: ", prec, "MCE");
366 	for_each_online_cpu(j)
367 		seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions);
368 	seq_printf(p, "  Machine check exceptions\n");
369 
370 	return 0;
371 }
372 
373 /*
374  * /proc/stat helpers
375  */
376 u64 arch_irq_stat_cpu(unsigned int cpu)
377 {
378 	u64 sum = per_cpu(irq_stat, cpu).timer_irqs;
379 
380 	sum += per_cpu(irq_stat, cpu).pmu_irqs;
381 	sum += per_cpu(irq_stat, cpu).mce_exceptions;
382 	sum += per_cpu(irq_stat, cpu).spurious_irqs;
383 
384 	return sum;
385 }
386 
387 #ifdef CONFIG_HOTPLUG_CPU
388 void migrate_irqs(void)
389 {
390 	struct irq_desc *desc;
391 	unsigned int irq;
392 	static int warned;
393 	cpumask_var_t mask;
394 	const struct cpumask *map = cpu_online_mask;
395 
396 	alloc_cpumask_var(&mask, GFP_KERNEL);
397 
398 	for_each_irq_desc(irq, desc) {
399 		struct irq_data *data;
400 		struct irq_chip *chip;
401 
402 		data = irq_desc_get_irq_data(desc);
403 		if (irqd_is_per_cpu(data))
404 			continue;
405 
406 		chip = irq_data_get_irq_chip(data);
407 
408 		cpumask_and(mask, data->affinity, map);
409 		if (cpumask_any(mask) >= nr_cpu_ids) {
410 			printk("Breaking affinity for irq %i\n", irq);
411 			cpumask_copy(mask, map);
412 		}
413 		if (chip->irq_set_affinity)
414 			chip->irq_set_affinity(data, mask, true);
415 		else if (desc->action && !(warned++))
416 			printk("Cannot set affinity for irq %i\n", irq);
417 	}
418 
419 	free_cpumask_var(mask);
420 
421 	local_irq_enable();
422 	mdelay(1);
423 	local_irq_disable();
424 }
425 #endif
426 
427 static inline void handle_one_irq(unsigned int irq)
428 {
429 	struct thread_info *curtp, *irqtp;
430 	unsigned long saved_sp_limit;
431 	struct irq_desc *desc;
432 
433 	desc = irq_to_desc(irq);
434 	if (!desc)
435 		return;
436 
437 	/* Switch to the irq stack to handle this */
438 	curtp = current_thread_info();
439 	irqtp = hardirq_ctx[smp_processor_id()];
440 
441 	if (curtp == irqtp) {
442 		/* We're already on the irq stack, just handle it */
443 		desc->handle_irq(irq, desc);
444 		return;
445 	}
446 
447 	saved_sp_limit = current->thread.ksp_limit;
448 
449 	irqtp->task = curtp->task;
450 	irqtp->flags = 0;
451 
452 	/* Copy the softirq bits in preempt_count so that the
453 	 * softirq checks work in the hardirq context. */
454 	irqtp->preempt_count = (irqtp->preempt_count & ~SOFTIRQ_MASK) |
455 			       (curtp->preempt_count & SOFTIRQ_MASK);
456 
457 	current->thread.ksp_limit = (unsigned long)irqtp +
458 		_ALIGN_UP(sizeof(struct thread_info), 16);
459 
460 	call_handle_irq(irq, desc, irqtp, desc->handle_irq);
461 	current->thread.ksp_limit = saved_sp_limit;
462 	irqtp->task = NULL;
463 
464 	/* Set any flag that may have been set on the
465 	 * alternate stack
466 	 */
467 	if (irqtp->flags)
468 		set_bits(irqtp->flags, &curtp->flags);
469 }
470 
471 static inline void check_stack_overflow(void)
472 {
473 #ifdef CONFIG_DEBUG_STACKOVERFLOW
474 	long sp;
475 
476 	sp = __get_SP() & (THREAD_SIZE-1);
477 
478 	/* check for stack overflow: is there less than 2KB free? */
479 	if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
480 		printk("do_IRQ: stack overflow: %ld\n",
481 			sp - sizeof(struct thread_info));
482 		dump_stack();
483 	}
484 #endif
485 }
486 
487 void do_IRQ(struct pt_regs *regs)
488 {
489 	struct pt_regs *old_regs = set_irq_regs(regs);
490 	unsigned int irq;
491 
492 	irq_enter();
493 
494 	trace_irq_entry(regs);
495 
496 	check_stack_overflow();
497 
498 	/*
499 	 * Query the platform PIC for the interrupt & ack it.
500 	 *
501 	 * This will typically lower the interrupt line to the CPU
502 	 */
503 	irq = ppc_md.get_irq();
504 
505 	/* We can hard enable interrupts now */
506 	may_hard_irq_enable();
507 
508 	/* And finally process it */
509 	if (irq != NO_IRQ)
510 		handle_one_irq(irq);
511 	else
512 		__get_cpu_var(irq_stat).spurious_irqs++;
513 
514 	trace_irq_exit(regs);
515 
516 	irq_exit();
517 	set_irq_regs(old_regs);
518 }
519 
520 void __init init_IRQ(void)
521 {
522 	if (ppc_md.init_IRQ)
523 		ppc_md.init_IRQ();
524 
525 	exc_lvl_ctx_init();
526 
527 	irq_ctx_init();
528 }
529 
530 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
531 struct thread_info   *critirq_ctx[NR_CPUS] __read_mostly;
532 struct thread_info    *dbgirq_ctx[NR_CPUS] __read_mostly;
533 struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly;
534 
535 void exc_lvl_ctx_init(void)
536 {
537 	struct thread_info *tp;
538 	int i, cpu_nr;
539 
540 	for_each_possible_cpu(i) {
541 #ifdef CONFIG_PPC64
542 		cpu_nr = i;
543 #else
544 		cpu_nr = get_hard_smp_processor_id(i);
545 #endif
546 		memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE);
547 		tp = critirq_ctx[cpu_nr];
548 		tp->cpu = cpu_nr;
549 		tp->preempt_count = 0;
550 
551 #ifdef CONFIG_BOOKE
552 		memset((void *)dbgirq_ctx[cpu_nr], 0, THREAD_SIZE);
553 		tp = dbgirq_ctx[cpu_nr];
554 		tp->cpu = cpu_nr;
555 		tp->preempt_count = 0;
556 
557 		memset((void *)mcheckirq_ctx[cpu_nr], 0, THREAD_SIZE);
558 		tp = mcheckirq_ctx[cpu_nr];
559 		tp->cpu = cpu_nr;
560 		tp->preempt_count = HARDIRQ_OFFSET;
561 #endif
562 	}
563 }
564 #endif
565 
566 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
567 struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
568 
569 void irq_ctx_init(void)
570 {
571 	struct thread_info *tp;
572 	int i;
573 
574 	for_each_possible_cpu(i) {
575 		memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
576 		tp = softirq_ctx[i];
577 		tp->cpu = i;
578 		tp->preempt_count = 0;
579 
580 		memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
581 		tp = hardirq_ctx[i];
582 		tp->cpu = i;
583 		tp->preempt_count = HARDIRQ_OFFSET;
584 	}
585 }
586 
587 static inline void do_softirq_onstack(void)
588 {
589 	struct thread_info *curtp, *irqtp;
590 	unsigned long saved_sp_limit = current->thread.ksp_limit;
591 
592 	curtp = current_thread_info();
593 	irqtp = softirq_ctx[smp_processor_id()];
594 	irqtp->task = curtp->task;
595 	irqtp->flags = 0;
596 	current->thread.ksp_limit = (unsigned long)irqtp +
597 				    _ALIGN_UP(sizeof(struct thread_info), 16);
598 	call_do_softirq(irqtp);
599 	current->thread.ksp_limit = saved_sp_limit;
600 	irqtp->task = NULL;
601 
602 	/* Set any flag that may have been set on the
603 	 * alternate stack
604 	 */
605 	if (irqtp->flags)
606 		set_bits(irqtp->flags, &curtp->flags);
607 }
608 
609 void do_softirq(void)
610 {
611 	unsigned long flags;
612 
613 	if (in_interrupt())
614 		return;
615 
616 	local_irq_save(flags);
617 
618 	if (local_softirq_pending())
619 		do_softirq_onstack();
620 
621 	local_irq_restore(flags);
622 }
623 
624 irq_hw_number_t virq_to_hw(unsigned int virq)
625 {
626 	struct irq_data *irq_data = irq_get_irq_data(virq);
627 	return WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
628 }
629 EXPORT_SYMBOL_GPL(virq_to_hw);
630 
631 #ifdef CONFIG_SMP
632 int irq_choose_cpu(const struct cpumask *mask)
633 {
634 	int cpuid;
635 
636 	if (cpumask_equal(mask, cpu_online_mask)) {
637 		static int irq_rover;
638 		static DEFINE_RAW_SPINLOCK(irq_rover_lock);
639 		unsigned long flags;
640 
641 		/* Round-robin distribution... */
642 do_round_robin:
643 		raw_spin_lock_irqsave(&irq_rover_lock, flags);
644 
645 		irq_rover = cpumask_next(irq_rover, cpu_online_mask);
646 		if (irq_rover >= nr_cpu_ids)
647 			irq_rover = cpumask_first(cpu_online_mask);
648 
649 		cpuid = irq_rover;
650 
651 		raw_spin_unlock_irqrestore(&irq_rover_lock, flags);
652 	} else {
653 		cpuid = cpumask_first_and(mask, cpu_online_mask);
654 		if (cpuid >= nr_cpu_ids)
655 			goto do_round_robin;
656 	}
657 
658 	return get_hard_smp_processor_id(cpuid);
659 }
660 #else
661 int irq_choose_cpu(const struct cpumask *mask)
662 {
663 	return hard_smp_processor_id();
664 }
665 #endif
666 
667 int arch_early_irq_init(void)
668 {
669 	return 0;
670 }
671 
672 #ifdef CONFIG_PPC64
673 static int __init setup_noirqdistrib(char *str)
674 {
675 	distribute_irqs = 0;
676 	return 1;
677 }
678 
679 __setup("noirqdistrib", setup_noirqdistrib);
680 #endif /* CONFIG_PPC64 */
681