1/* 2 * This file contains idle entry/exit functions for POWER7, 3 * POWER8 and POWER9 CPUs. 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License 7 * as published by the Free Software Foundation; either version 8 * 2 of the License, or (at your option) any later version. 9 */ 10 11#include <linux/threads.h> 12#include <asm/processor.h> 13#include <asm/page.h> 14#include <asm/cputable.h> 15#include <asm/thread_info.h> 16#include <asm/ppc_asm.h> 17#include <asm/asm-offsets.h> 18#include <asm/ppc-opcode.h> 19#include <asm/hw_irq.h> 20#include <asm/kvm_book3s_asm.h> 21#include <asm/opal.h> 22#include <asm/cpuidle.h> 23#include <asm/exception-64s.h> 24#include <asm/book3s/64/mmu-hash.h> 25#include <asm/mmu.h> 26 27#undef DEBUG 28 29/* 30 * Use unused space in the interrupt stack to save and restore 31 * registers for winkle support. 32 */ 33#define _MMCR0 GPR0 34#define _SDR1 GPR3 35#define _PTCR GPR3 36#define _RPR GPR4 37#define _SPURR GPR5 38#define _PURR GPR6 39#define _TSCR GPR7 40#define _DSCR GPR8 41#define _AMOR GPR9 42#define _WORT GPR10 43#define _WORC GPR11 44#define _LPCR GPR12 45 46#define PSSCR_EC_ESL_MASK_SHIFTED (PSSCR_EC | PSSCR_ESL) >> 16 47 48 .text 49 50/* 51 * Used by threads before entering deep idle states. Saves SPRs 52 * in interrupt stack frame 53 */ 54save_sprs_to_stack: 55 /* 56 * Note all register i.e per-core, per-subcore or per-thread is saved 57 * here since any thread in the core might wake up first 58 */ 59BEGIN_FTR_SECTION 60 /* 61 * Note - SDR1 is dropped in Power ISA v3. Hence not restoring 62 * SDR1 here 63 */ 64 mfspr r3,SPRN_PTCR 65 std r3,_PTCR(r1) 66 mfspr r3,SPRN_LPCR 67 std r3,_LPCR(r1) 68FTR_SECTION_ELSE 69 mfspr r3,SPRN_SDR1 70 std r3,_SDR1(r1) 71ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300) 72 mfspr r3,SPRN_RPR 73 std r3,_RPR(r1) 74 mfspr r3,SPRN_SPURR 75 std r3,_SPURR(r1) 76 mfspr r3,SPRN_PURR 77 std r3,_PURR(r1) 78 mfspr r3,SPRN_TSCR 79 std r3,_TSCR(r1) 80 mfspr r3,SPRN_DSCR 81 std r3,_DSCR(r1) 82 mfspr r3,SPRN_AMOR 83 std r3,_AMOR(r1) 84 mfspr r3,SPRN_WORT 85 std r3,_WORT(r1) 86 mfspr r3,SPRN_WORC 87 std r3,_WORC(r1) 88/* 89 * On POWER9, there are idle states such as stop4, invoked via cpuidle, 90 * that lose hypervisor resources. In such cases, we need to save 91 * additional SPRs before entering those idle states so that they can 92 * be restored to their older values on wakeup from the idle state. 93 * 94 * On POWER8, the only such deep idle state is winkle which is used 95 * only in the context of CPU-Hotplug, where these additional SPRs are 96 * reinitiazed to a sane value. Hence there is no need to save/restore 97 * these SPRs. 98 */ 99BEGIN_FTR_SECTION 100 blr 101END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) 102 103power9_save_additional_sprs: 104 mfspr r3, SPRN_PID 105 mfspr r4, SPRN_LDBAR 106 std r3, STOP_PID(r13) 107 std r4, STOP_LDBAR(r13) 108 109 mfspr r3, SPRN_FSCR 110 mfspr r4, SPRN_HFSCR 111 std r3, STOP_FSCR(r13) 112 std r4, STOP_HFSCR(r13) 113 114 mfspr r3, SPRN_MMCRA 115 mfspr r4, SPRN_MMCR0 116 std r3, STOP_MMCRA(r13) 117 std r4, _MMCR0(r1) 118 119 mfspr r3, SPRN_MMCR1 120 mfspr r4, SPRN_MMCR2 121 std r3, STOP_MMCR1(r13) 122 std r4, STOP_MMCR2(r13) 123 blr 124 125power9_restore_additional_sprs: 126 ld r3,_LPCR(r1) 127 ld r4, STOP_PID(r13) 128 mtspr SPRN_LPCR,r3 129 mtspr SPRN_PID, r4 130 131 ld r3, STOP_LDBAR(r13) 132 ld r4, STOP_FSCR(r13) 133 mtspr SPRN_LDBAR, r3 134 mtspr SPRN_FSCR, r4 135 136 ld r3, STOP_HFSCR(r13) 137 ld r4, STOP_MMCRA(r13) 138 mtspr SPRN_HFSCR, r3 139 mtspr SPRN_MMCRA, r4 140 141 ld r3, _MMCR0(r1) 142 ld r4, STOP_MMCR1(r13) 143 mtspr SPRN_MMCR0, r3 144 mtspr SPRN_MMCR1, r4 145 146 ld r3, STOP_MMCR2(r13) 147 mtspr SPRN_MMCR2, r3 148 blr 149 150/* 151 * Used by threads when the lock bit of core_idle_state is set. 152 * Threads will spin in HMT_LOW until the lock bit is cleared. 153 * r14 - pointer to core_idle_state 154 * r15 - used to load contents of core_idle_state 155 * r9 - used as a temporary variable 156 */ 157 158core_idle_lock_held: 159 HMT_LOW 1603: lwz r15,0(r14) 161 andis. r15,r15,PNV_CORE_IDLE_LOCK_BIT@h 162 bne 3b 163 HMT_MEDIUM 164 lwarx r15,0,r14 165 andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h 166 bne- core_idle_lock_held 167 blr 168 169/* 170 * Pass requested state in r3: 171 * r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8 172 * - Requested PSSCR value in POWER9 173 * 174 * Address of idle handler to branch to in realmode in r4 175 */ 176pnv_powersave_common: 177 /* Use r3 to pass state nap/sleep/winkle */ 178 /* NAP is a state loss, we create a regs frame on the 179 * stack, fill it up with the state we care about and 180 * stick a pointer to it in PACAR1. We really only 181 * need to save PC, some CR bits and the NV GPRs, 182 * but for now an interrupt frame will do. 183 */ 184 mtctr r4 185 186 mflr r0 187 std r0,16(r1) 188 stdu r1,-INT_FRAME_SIZE(r1) 189 std r0,_LINK(r1) 190 std r0,_NIP(r1) 191 192 /* We haven't lost state ... yet */ 193 li r0,0 194 stb r0,PACA_NAPSTATELOST(r13) 195 196 /* Continue saving state */ 197 SAVE_GPR(2, r1) 198 SAVE_NVGPRS(r1) 199 mfcr r5 200 std r5,_CCR(r1) 201 std r1,PACAR1(r13) 202 203BEGIN_FTR_SECTION 204 /* 205 * POWER9 does not require real mode to stop, and presently does not 206 * set hwthread_state for KVM (threads don't share MMU context), so 207 * we can remain in virtual mode for this. 208 */ 209 bctr 210END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) 211 /* 212 * POWER8 213 * Go to real mode to do the nap, as required by the architecture. 214 * Also, we need to be in real mode before setting hwthread_state, 215 * because as soon as we do that, another thread can switch 216 * the MMU context to the guest. 217 */ 218 LOAD_REG_IMMEDIATE(r7, MSR_IDLE) 219 mtmsrd r7,0 220 bctr 221 222/* 223 * This is the sequence required to execute idle instructions, as 224 * specified in ISA v2.07 (and earlier). MSR[IR] and MSR[DR] must be 0. 225 */ 226#define IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST) \ 227 /* Magic NAP/SLEEP/WINKLE mode enter sequence */ \ 228 std r0,0(r1); \ 229 ptesync; \ 230 ld r0,0(r1); \ 231236: cmpd cr0,r0,r0; \ 232 bne 236b; \ 233 IDLE_INST; 234 235 236 .globl pnv_enter_arch207_idle_mode 237pnv_enter_arch207_idle_mode: 238#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE 239 /* Tell KVM we're entering idle */ 240 li r4,KVM_HWTHREAD_IN_IDLE 241 /******************************************************/ 242 /* N O T E W E L L ! ! ! N O T E W E L L */ 243 /* The following store to HSTATE_HWTHREAD_STATE(r13) */ 244 /* MUST occur in real mode, i.e. with the MMU off, */ 245 /* and the MMU must stay off until we clear this flag */ 246 /* and test HSTATE_HWTHREAD_REQ(r13) in */ 247 /* pnv_powersave_wakeup in this file. */ 248 /* The reason is that another thread can switch the */ 249 /* MMU to a guest context whenever this flag is set */ 250 /* to KVM_HWTHREAD_IN_IDLE, and if the MMU was on, */ 251 /* that would potentially cause this thread to start */ 252 /* executing instructions from guest memory in */ 253 /* hypervisor mode, leading to a host crash or data */ 254 /* corruption, or worse. */ 255 /******************************************************/ 256 stb r4,HSTATE_HWTHREAD_STATE(r13) 257#endif 258 stb r3,PACA_THREAD_IDLE_STATE(r13) 259 cmpwi cr3,r3,PNV_THREAD_SLEEP 260 bge cr3,2f 261 IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP) 262 /* No return */ 2632: 264 /* Sleep or winkle */ 265 lbz r7,PACA_THREAD_MASK(r13) 266 ld r14,PACA_CORE_IDLE_STATE_PTR(r13) 267 li r5,0 268 beq cr3,3f 269 lis r5,PNV_CORE_IDLE_WINKLE_COUNT@h 2703: 271lwarx_loop1: 272 lwarx r15,0,r14 273 274 andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h 275 bnel- core_idle_lock_held 276 277 add r15,r15,r5 /* Add if winkle */ 278 andc r15,r15,r7 /* Clear thread bit */ 279 280 andi. r9,r15,PNV_CORE_IDLE_THREAD_BITS 281 282/* 283 * If cr0 = 0, then current thread is the last thread of the core entering 284 * sleep. Last thread needs to execute the hardware bug workaround code if 285 * required by the platform. 286 * Make the workaround call unconditionally here. The below branch call is 287 * patched out when the idle states are discovered if the platform does not 288 * require it. 289 */ 290.global pnv_fastsleep_workaround_at_entry 291pnv_fastsleep_workaround_at_entry: 292 beq fastsleep_workaround_at_entry 293 294 stwcx. r15,0,r14 295 bne- lwarx_loop1 296 isync 297 298common_enter: /* common code for all the threads entering sleep or winkle */ 299 bgt cr3,enter_winkle 300 IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP) 301 302fastsleep_workaround_at_entry: 303 oris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h 304 stwcx. r15,0,r14 305 bne- lwarx_loop1 306 isync 307 308 /* Fast sleep workaround */ 309 li r3,1 310 li r4,1 311 bl opal_config_cpu_idle_state 312 313 /* Unlock */ 314 xoris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h 315 lwsync 316 stw r15,0(r14) 317 b common_enter 318 319enter_winkle: 320 bl save_sprs_to_stack 321 322 IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE) 323 324/* 325 * r3 - PSSCR value corresponding to the requested stop state. 326 */ 327power_enter_stop: 328/* 329 * Check if we are executing the lite variant with ESL=EC=0 330 */ 331 andis. r4,r3,PSSCR_EC_ESL_MASK_SHIFTED 332 clrldi r3,r3,60 /* r3 = Bits[60:63] = Requested Level (RL) */ 333 bne .Lhandle_esl_ec_set 334 PPC_STOP 335 li r3,0 /* Since we didn't lose state, return 0 */ 336 std r3, PACA_REQ_PSSCR(r13) 337 338 /* 339 * pnv_wakeup_noloss() expects r12 to contain the SRR1 value so 340 * it can determine if the wakeup reason is an HMI in 341 * CHECK_HMI_INTERRUPT. 342 * 343 * However, when we wakeup with ESL=0, SRR1 will not contain the wakeup 344 * reason, so there is no point setting r12 to SRR1. 345 * 346 * Further, we clear r12 here, so that we don't accidentally enter the 347 * HMI in pnv_wakeup_noloss() if the value of r12[42:45] == WAKE_HMI. 348 */ 349 li r12, 0 350 b pnv_wakeup_noloss 351 352.Lhandle_esl_ec_set: 353BEGIN_FTR_SECTION 354 /* 355 * POWER9 DD2.0 or earlier can incorrectly set PMAO when waking up after 356 * a state-loss idle. Saving and restoring MMCR0 over idle is a 357 * workaround. 358 */ 359 mfspr r4,SPRN_MMCR0 360 std r4,_MMCR0(r1) 361END_FTR_SECTION_IFCLR(CPU_FTR_POWER9_DD2_1) 362 363/* 364 * Check if the requested state is a deep idle state. 365 */ 366 LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state) 367 ld r4,ADDROFF(pnv_first_deep_stop_state)(r5) 368 cmpd r3,r4 369 bge .Lhandle_deep_stop 370 PPC_STOP /* Does not return (system reset interrupt) */ 371 372.Lhandle_deep_stop: 373/* 374 * Entering deep idle state. 375 * Clear thread bit in PACA_CORE_IDLE_STATE, save SPRs to 376 * stack and enter stop 377 */ 378 lbz r7,PACA_THREAD_MASK(r13) 379 ld r14,PACA_CORE_IDLE_STATE_PTR(r13) 380 381lwarx_loop_stop: 382 lwarx r15,0,r14 383 andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h 384 bnel- core_idle_lock_held 385 andc r15,r15,r7 /* Clear thread bit */ 386 387 stwcx. r15,0,r14 388 bne- lwarx_loop_stop 389 isync 390 391 bl save_sprs_to_stack 392 393 PPC_STOP /* Does not return (system reset interrupt) */ 394 395/* 396 * Entered with MSR[EE]=0 and no soft-masked interrupts pending. 397 * r3 contains desired idle state (PNV_THREAD_NAP/SLEEP/WINKLE). 398 */ 399_GLOBAL(power7_idle_insn) 400 /* Now check if user or arch enabled NAP mode */ 401 LOAD_REG_ADDR(r4, pnv_enter_arch207_idle_mode) 402 b pnv_powersave_common 403 404#define CHECK_HMI_INTERRUPT \ 405BEGIN_FTR_SECTION_NESTED(66); \ 406 rlwinm r0,r12,45-31,0xf; /* extract wake reason field (P8) */ \ 407FTR_SECTION_ELSE_NESTED(66); \ 408 rlwinm r0,r12,45-31,0xe; /* P7 wake reason field is 3 bits */ \ 409ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \ 410 cmpwi r0,0xa; /* Hypervisor maintenance ? */ \ 411 bne+ 20f; \ 412 /* Invoke opal call to handle hmi */ \ 413 ld r2,PACATOC(r13); \ 414 ld r1,PACAR1(r13); \ 415 std r3,ORIG_GPR3(r1); /* Save original r3 */ \ 416 li r3,0; /* NULL argument */ \ 417 bl hmi_exception_realmode; \ 418 nop; \ 419 ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \ 42020: nop; 421 422/* 423 * Entered with MSR[EE]=0 and no soft-masked interrupts pending. 424 * r3 contains desired PSSCR register value. 425 * 426 * Offline (CPU unplug) case also must notify KVM that the CPU is 427 * idle. 428 */ 429_GLOBAL(power9_offline_stop) 430#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE 431 /* 432 * Tell KVM we're entering idle. 433 * This does not have to be done in real mode because the P9 MMU 434 * is independent per-thread. Some steppings share radix/hash mode 435 * between threads, but in that case KVM has a barrier sync in real 436 * mode before and after switching between radix and hash. 437 */ 438 li r4,KVM_HWTHREAD_IN_IDLE 439 stb r4,HSTATE_HWTHREAD_STATE(r13) 440#endif 441 /* fall through */ 442 443_GLOBAL(power9_idle_stop) 444 std r3, PACA_REQ_PSSCR(r13) 445#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE 446BEGIN_FTR_SECTION 447 sync 448 lwz r5, PACA_DONT_STOP(r13) 449 cmpwi r5, 0 450 bne 1f 451END_FTR_SECTION_IFSET(CPU_FTR_P9_TM_XER_SO_BUG) 452#endif 453 mtspr SPRN_PSSCR,r3 454 LOAD_REG_ADDR(r4,power_enter_stop) 455 b pnv_powersave_common 456 /* No return */ 457#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE 4581: 459 /* 460 * We get here when TM / thread reconfiguration bug workaround 461 * code wants to get the CPU into SMT4 mode, and therefore 462 * we are being asked not to stop. 463 */ 464 li r3, 0 465 std r3, PACA_REQ_PSSCR(r13) 466 blr /* return 0 for wakeup cause / SRR1 value */ 467#endif 468 469/* 470 * On waking up from stop 0,1,2 with ESL=1 on POWER9 DD1, 471 * HSPRG0 will be set to the HSPRG0 value of one of the 472 * threads in this core. Thus the value we have in r13 473 * may not be this thread's paca pointer. 474 * 475 * Fortunately, the TIR remains invariant. Since this thread's 476 * paca pointer is recorded in all its sibling's paca, we can 477 * correctly recover this thread's paca pointer if we 478 * know the index of this thread in the core. 479 * 480 * This index can be obtained from the TIR. 481 * 482 * i.e, thread's position in the core = TIR. 483 * If this value is i, then this thread's paca is 484 * paca->thread_sibling_pacas[i]. 485 */ 486power9_dd1_recover_paca: 487 mfspr r4, SPRN_TIR 488 /* 489 * Since each entry in thread_sibling_pacas is 8 bytes 490 * we need to left-shift by 3 bits. Thus r4 = i * 8 491 */ 492 sldi r4, r4, 3 493 /* Get &paca->thread_sibling_pacas[0] in r5 */ 494 ld r5, PACA_SIBLING_PACA_PTRS(r13) 495 /* Load paca->thread_sibling_pacas[i] into r13 */ 496 ldx r13, r4, r5 497 SET_PACA(r13) 498 /* 499 * Indicate that we have lost NVGPR state 500 * which needs to be restored from the stack. 501 */ 502 li r3, 1 503 stb r3,PACA_NAPSTATELOST(r13) 504 blr 505 506/* 507 * Called from machine check handler for powersave wakeups. 508 * Low level machine check processing has already been done. Now just 509 * go through the wake up path to get everything in order. 510 * 511 * r3 - The original SRR1 value. 512 * Original SRR[01] have been clobbered. 513 * MSR_RI is clear. 514 */ 515.global pnv_powersave_wakeup_mce 516pnv_powersave_wakeup_mce: 517 /* Set cr3 for pnv_powersave_wakeup */ 518 rlwinm r11,r3,47-31,30,31 519 cmpwi cr3,r11,2 520 521 /* 522 * Now put the original SRR1 with SRR1_WAKEMCE_RESVD as the wake 523 * reason into r12, which allows reuse of the system reset wakeup 524 * code without being mistaken for another type of wakeup. 525 */ 526 oris r12,r3,SRR1_WAKEMCE_RESVD@h 527 528 b pnv_powersave_wakeup 529 530/* 531 * Called from reset vector for powersave wakeups. 532 * cr3 - set to gt if waking up with partial/complete hypervisor state loss 533 * r12 - SRR1 534 */ 535.global pnv_powersave_wakeup 536pnv_powersave_wakeup: 537 ld r2, PACATOC(r13) 538 539BEGIN_FTR_SECTION 540BEGIN_FTR_SECTION_NESTED(70) 541 bl power9_dd1_recover_paca 542END_FTR_SECTION_NESTED_IFSET(CPU_FTR_POWER9_DD1, 70) 543 bl pnv_restore_hyp_resource_arch300 544FTR_SECTION_ELSE 545 bl pnv_restore_hyp_resource_arch207 546ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300) 547 548 li r0,PNV_THREAD_RUNNING 549 stb r0,PACA_THREAD_IDLE_STATE(r13) /* Clear thread state */ 550 551 mr r3,r12 552 553#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE 554 lbz r0,HSTATE_HWTHREAD_STATE(r13) 555 cmpwi r0,KVM_HWTHREAD_IN_KERNEL 556 beq 1f 557 li r0,KVM_HWTHREAD_IN_KERNEL 558 stb r0,HSTATE_HWTHREAD_STATE(r13) 559 /* Order setting hwthread_state vs. testing hwthread_req */ 560 sync 561 lbz r0,HSTATE_HWTHREAD_REQ(r13) 562 cmpwi r0,0 563 beq 1f 564 b kvm_start_guest 5651: 566#endif 567 568 /* Return SRR1 from power7_nap() */ 569 blt cr3,pnv_wakeup_noloss 570 b pnv_wakeup_loss 571 572/* 573 * Check whether we have woken up with hypervisor state loss. 574 * If yes, restore hypervisor state and return back to link. 575 * 576 * cr3 - set to gt if waking up with partial/complete hypervisor state loss 577 */ 578pnv_restore_hyp_resource_arch300: 579 /* 580 * Workaround for POWER9, if we lost resources, the ERAT 581 * might have been mixed up and needs flushing. We also need 582 * to reload MMCR0 (see comment above). We also need to set 583 * then clear bit 60 in MMCRA to ensure the PMU starts running. 584 */ 585 blt cr3,1f 586BEGIN_FTR_SECTION 587 PPC_INVALIDATE_ERAT 588 ld r1,PACAR1(r13) 589 ld r4,_MMCR0(r1) 590 mtspr SPRN_MMCR0,r4 591END_FTR_SECTION_IFCLR(CPU_FTR_POWER9_DD2_1) 592 mfspr r4,SPRN_MMCRA 593 ori r4,r4,(1 << (63-60)) 594 mtspr SPRN_MMCRA,r4 595 xori r4,r4,(1 << (63-60)) 596 mtspr SPRN_MMCRA,r4 5971: 598 /* 599 * POWER ISA 3. Use PSSCR to determine if we 600 * are waking up from deep idle state 601 */ 602 LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state) 603 ld r4,ADDROFF(pnv_first_deep_stop_state)(r5) 604 605BEGIN_FTR_SECTION_NESTED(71) 606 /* 607 * Assume that we are waking up from the state 608 * same as the Requested Level (RL) in the PSSCR 609 * which are Bits 60-63 610 */ 611 ld r5,PACA_REQ_PSSCR(r13) 612 rldicl r5,r5,0,60 613FTR_SECTION_ELSE_NESTED(71) 614 /* 615 * 0-3 bits correspond to Power-Saving Level Status 616 * which indicates the idle state we are waking up from 617 */ 618 mfspr r5, SPRN_PSSCR 619 rldicl r5,r5,4,60 620ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_POWER9_DD1, 71) 621 li r0, 0 /* clear requested_psscr to say we're awake */ 622 std r0, PACA_REQ_PSSCR(r13) 623 cmpd cr4,r5,r4 624 bge cr4,pnv_wakeup_tb_loss /* returns to caller */ 625 626 blr /* Waking up without hypervisor state loss. */ 627 628/* Same calling convention as arch300 */ 629pnv_restore_hyp_resource_arch207: 630 /* 631 * POWER ISA 2.07 or less. 632 * Check if we slept with sleep or winkle. 633 */ 634 lbz r4,PACA_THREAD_IDLE_STATE(r13) 635 cmpwi cr2,r4,PNV_THREAD_NAP 636 bgt cr2,pnv_wakeup_tb_loss /* Either sleep or Winkle */ 637 638 /* 639 * We fall through here if PACA_THREAD_IDLE_STATE shows we are waking 640 * up from nap. At this stage CR3 shouldn't contains 'gt' since that 641 * indicates we are waking with hypervisor state loss from nap. 642 */ 643 bgt cr3,. 644 645 blr /* Waking up without hypervisor state loss */ 646 647/* 648 * Called if waking up from idle state which can cause either partial or 649 * complete hyp state loss. 650 * In POWER8, called if waking up from fastsleep or winkle 651 * In POWER9, called if waking up from stop state >= pnv_first_deep_stop_state 652 * 653 * r13 - PACA 654 * cr3 - gt if waking up with partial/complete hypervisor state loss 655 * 656 * If ISA300: 657 * cr4 - gt or eq if waking up from complete hypervisor state loss. 658 * 659 * If ISA207: 660 * r4 - PACA_THREAD_IDLE_STATE 661 */ 662pnv_wakeup_tb_loss: 663 ld r1,PACAR1(r13) 664 /* 665 * Before entering any idle state, the NVGPRs are saved in the stack. 666 * If there was a state loss, or PACA_NAPSTATELOST was set, then the 667 * NVGPRs are restored. If we are here, it is likely that state is lost, 668 * but not guaranteed -- neither ISA207 nor ISA300 tests to reach 669 * here are the same as the test to restore NVGPRS: 670 * PACA_THREAD_IDLE_STATE test for ISA207, PSSCR test for ISA300, 671 * and SRR1 test for restoring NVGPRs. 672 * 673 * We are about to clobber NVGPRs now, so set NAPSTATELOST to 674 * guarantee they will always be restored. This might be tightened 675 * with careful reading of specs (particularly for ISA300) but this 676 * is already a slow wakeup path and it's simpler to be safe. 677 */ 678 li r0,1 679 stb r0,PACA_NAPSTATELOST(r13) 680 681 /* 682 * 683 * Save SRR1 and LR in NVGPRs as they might be clobbered in 684 * opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required 685 * to determine the wakeup reason if we branch to kvm_start_guest. LR 686 * is required to return back to reset vector after hypervisor state 687 * restore is complete. 688 */ 689 mr r19,r12 690 mr r18,r4 691 mflr r17 692BEGIN_FTR_SECTION 693 CHECK_HMI_INTERRUPT 694END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) 695 696 ld r14,PACA_CORE_IDLE_STATE_PTR(r13) 697 lbz r7,PACA_THREAD_MASK(r13) 698 699 /* 700 * Take the core lock to synchronize against other threads. 701 * 702 * Lock bit is set in one of the 2 cases- 703 * a. In the sleep/winkle enter path, the last thread is executing 704 * fastsleep workaround code. 705 * b. In the wake up path, another thread is executing fastsleep 706 * workaround undo code or resyncing timebase or restoring context 707 * In either case loop until the lock bit is cleared. 708 */ 7091: 710 lwarx r15,0,r14 711 andis. r9,r15,PNV_CORE_IDLE_LOCK_BIT@h 712 bnel- core_idle_lock_held 713 oris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h 714 stwcx. r15,0,r14 715 bne- 1b 716 isync 717 718 andi. r9,r15,PNV_CORE_IDLE_THREAD_BITS 719 cmpwi cr2,r9,0 720 721 /* 722 * At this stage 723 * cr2 - eq if first thread to wakeup in core 724 * cr3- gt if waking up with partial/complete hypervisor state loss 725 * ISA300: 726 * cr4 - gt or eq if waking up from complete hypervisor state loss. 727 */ 728 729BEGIN_FTR_SECTION 730 /* 731 * Were we in winkle? 732 * If yes, check if all threads were in winkle, decrement our 733 * winkle count, set all thread winkle bits if all were in winkle. 734 * Check if our thread has a winkle bit set, and set cr4 accordingly 735 * (to match ISA300, above). Pseudo-code for core idle state 736 * transitions for ISA207 is as follows (everything happens atomically 737 * due to store conditional and/or lock bit): 738 * 739 * nap_idle() { } 740 * nap_wake() { } 741 * 742 * sleep_idle() 743 * { 744 * core_idle_state &= ~thread_in_core 745 * } 746 * 747 * sleep_wake() 748 * { 749 * bool first_in_core, first_in_subcore; 750 * 751 * first_in_core = (core_idle_state & IDLE_THREAD_BITS) == 0; 752 * first_in_subcore = (core_idle_state & SUBCORE_SIBLING_MASK) == 0; 753 * 754 * core_idle_state |= thread_in_core; 755 * } 756 * 757 * winkle_idle() 758 * { 759 * core_idle_state &= ~thread_in_core; 760 * core_idle_state += 1 << WINKLE_COUNT_SHIFT; 761 * } 762 * 763 * winkle_wake() 764 * { 765 * bool first_in_core, first_in_subcore, winkle_state_lost; 766 * 767 * first_in_core = (core_idle_state & IDLE_THREAD_BITS) == 0; 768 * first_in_subcore = (core_idle_state & SUBCORE_SIBLING_MASK) == 0; 769 * 770 * core_idle_state |= thread_in_core; 771 * 772 * if ((core_idle_state & WINKLE_MASK) == (8 << WINKLE_COUNT_SIHFT)) 773 * core_idle_state |= THREAD_WINKLE_BITS; 774 * core_idle_state -= 1 << WINKLE_COUNT_SHIFT; 775 * 776 * winkle_state_lost = core_idle_state & 777 * (thread_in_core << WINKLE_THREAD_SHIFT); 778 * core_idle_state &= ~(thread_in_core << WINKLE_THREAD_SHIFT); 779 * } 780 * 781 */ 782 cmpwi r18,PNV_THREAD_WINKLE 783 bne 2f 784 andis. r9,r15,PNV_CORE_IDLE_WINKLE_COUNT_ALL_BIT@h 785 subis r15,r15,PNV_CORE_IDLE_WINKLE_COUNT@h 786 beq 2f 787 ori r15,r15,PNV_CORE_IDLE_THREAD_WINKLE_BITS /* all were winkle */ 7882: 789 /* Shift thread bit to winkle mask, then test if this thread is set, 790 * and remove it from the winkle bits */ 791 slwi r8,r7,8 792 and r8,r8,r15 793 andc r15,r15,r8 794 cmpwi cr4,r8,1 /* cr4 will be gt if our bit is set, lt if not */ 795 796 lbz r4,PACA_SUBCORE_SIBLING_MASK(r13) 797 and r4,r4,r15 798 cmpwi r4,0 /* Check if first in subcore */ 799 800 or r15,r15,r7 /* Set thread bit */ 801 beq first_thread_in_subcore 802END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) 803 804 or r15,r15,r7 /* Set thread bit */ 805 beq cr2,first_thread_in_core 806 807 /* Not first thread in core or subcore to wake up */ 808 b clear_lock 809 810first_thread_in_subcore: 811 /* 812 * If waking up from sleep, subcore state is not lost. Hence 813 * skip subcore state restore 814 */ 815 blt cr4,subcore_state_restored 816 817 /* Restore per-subcore state */ 818 ld r4,_SDR1(r1) 819 mtspr SPRN_SDR1,r4 820 821 ld r4,_RPR(r1) 822 mtspr SPRN_RPR,r4 823 ld r4,_AMOR(r1) 824 mtspr SPRN_AMOR,r4 825 826subcore_state_restored: 827 /* 828 * Check if the thread is also the first thread in the core. If not, 829 * skip to clear_lock. 830 */ 831 bne cr2,clear_lock 832 833first_thread_in_core: 834 835 /* 836 * First thread in the core waking up from any state which can cause 837 * partial or complete hypervisor state loss. It needs to 838 * call the fastsleep workaround code if the platform requires it. 839 * Call it unconditionally here. The below branch instruction will 840 * be patched out if the platform does not have fastsleep or does not 841 * require the workaround. Patching will be performed during the 842 * discovery of idle-states. 843 */ 844.global pnv_fastsleep_workaround_at_exit 845pnv_fastsleep_workaround_at_exit: 846 b fastsleep_workaround_at_exit 847 848timebase_resync: 849 /* 850 * Use cr3 which indicates that we are waking up with atleast partial 851 * hypervisor state loss to determine if TIMEBASE RESYNC is needed. 852 */ 853 ble cr3,.Ltb_resynced 854 /* Time base re-sync */ 855 bl opal_resync_timebase; 856 /* 857 * If waking up from sleep (POWER8), per core state 858 * is not lost, skip to clear_lock. 859 */ 860.Ltb_resynced: 861 blt cr4,clear_lock 862 863 /* 864 * First thread in the core to wake up and its waking up with 865 * complete hypervisor state loss. Restore per core hypervisor 866 * state. 867 */ 868BEGIN_FTR_SECTION 869 ld r4,_PTCR(r1) 870 mtspr SPRN_PTCR,r4 871 ld r4,_RPR(r1) 872 mtspr SPRN_RPR,r4 873 ld r4,_AMOR(r1) 874 mtspr SPRN_AMOR,r4 875END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) 876 877 ld r4,_TSCR(r1) 878 mtspr SPRN_TSCR,r4 879 ld r4,_WORC(r1) 880 mtspr SPRN_WORC,r4 881 882clear_lock: 883 xoris r15,r15,PNV_CORE_IDLE_LOCK_BIT@h 884 lwsync 885 stw r15,0(r14) 886 887common_exit: 888 /* 889 * Common to all threads. 890 * 891 * If waking up from sleep, hypervisor state is not lost. Hence 892 * skip hypervisor state restore. 893 */ 894 blt cr4,hypervisor_state_restored 895 896 /* Waking up from winkle */ 897 898BEGIN_MMU_FTR_SECTION 899 b no_segments 900END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX) 901 /* Restore SLB from PACA */ 902 ld r8,PACA_SLBSHADOWPTR(r13) 903 904 .rept SLB_NUM_BOLTED 905 li r3, SLBSHADOW_SAVEAREA 906 LDX_BE r5, r8, r3 907 addi r3, r3, 8 908 LDX_BE r6, r8, r3 909 andis. r7,r5,SLB_ESID_V@h 910 beq 1f 911 slbmte r6,r5 9121: addi r8,r8,16 913 .endr 914no_segments: 915 916 /* Restore per thread state */ 917 918 ld r4,_SPURR(r1) 919 mtspr SPRN_SPURR,r4 920 ld r4,_PURR(r1) 921 mtspr SPRN_PURR,r4 922 ld r4,_DSCR(r1) 923 mtspr SPRN_DSCR,r4 924 ld r4,_WORT(r1) 925 mtspr SPRN_WORT,r4 926 927 /* Call cur_cpu_spec->cpu_restore() */ 928 LOAD_REG_ADDR(r4, cur_cpu_spec) 929 ld r4,0(r4) 930 ld r12,CPU_SPEC_RESTORE(r4) 931#ifdef PPC64_ELF_ABI_v1 932 ld r12,0(r12) 933#endif 934 mtctr r12 935 bctrl 936 937/* 938 * On POWER9, we can come here on wakeup from a cpuidle stop state. 939 * Hence restore the additional SPRs to the saved value. 940 * 941 * On POWER8, we come here only on winkle. Since winkle is used 942 * only in the case of CPU-Hotplug, we don't need to restore 943 * the additional SPRs. 944 */ 945BEGIN_FTR_SECTION 946 bl power9_restore_additional_sprs 947END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) 948hypervisor_state_restored: 949 950 mr r12,r19 951 mtlr r17 952 blr /* return to pnv_powersave_wakeup */ 953 954fastsleep_workaround_at_exit: 955 li r3,1 956 li r4,0 957 bl opal_config_cpu_idle_state 958 b timebase_resync 959 960/* 961 * R3 here contains the value that will be returned to the caller 962 * of power7_nap. 963 * R12 contains SRR1 for CHECK_HMI_INTERRUPT. 964 */ 965.global pnv_wakeup_loss 966pnv_wakeup_loss: 967 ld r1,PACAR1(r13) 968BEGIN_FTR_SECTION 969 CHECK_HMI_INTERRUPT 970END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) 971 REST_NVGPRS(r1) 972 REST_GPR(2, r1) 973 ld r4,PACAKMSR(r13) 974 ld r5,_LINK(r1) 975 ld r6,_CCR(r1) 976 addi r1,r1,INT_FRAME_SIZE 977 mtlr r5 978 mtcr r6 979 mtmsrd r4 980 blr 981 982/* 983 * R3 here contains the value that will be returned to the caller 984 * of power7_nap. 985 * R12 contains SRR1 for CHECK_HMI_INTERRUPT. 986 */ 987pnv_wakeup_noloss: 988 lbz r0,PACA_NAPSTATELOST(r13) 989 cmpwi r0,0 990 bne pnv_wakeup_loss 991 ld r1,PACAR1(r13) 992BEGIN_FTR_SECTION 993 CHECK_HMI_INTERRUPT 994END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) 995 ld r4,PACAKMSR(r13) 996 ld r5,_NIP(r1) 997 ld r6,_CCR(r1) 998 addi r1,r1,INT_FRAME_SIZE 999 mtlr r5 1000 mtcr r6 1001 mtmsrd r4 1002 blr 1003