1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef __HEAD_BOOKE_H__ 3 #define __HEAD_BOOKE_H__ 4 5 #include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */ 6 #include <asm/kvm_asm.h> 7 #include <asm/kvm_booke_hv_asm.h> 8 9 #ifdef __ASSEMBLY__ 10 11 /* 12 * Macros used for common Book-e exception handling 13 */ 14 15 #define SET_IVOR(vector_number, vector_label) \ 16 li r26,vector_label@l; \ 17 mtspr SPRN_IVOR##vector_number,r26; \ 18 sync 19 20 #if (THREAD_SHIFT < 15) 21 #define ALLOC_STACK_FRAME(reg, val) \ 22 addi reg,reg,val 23 #else 24 #define ALLOC_STACK_FRAME(reg, val) \ 25 addis reg,reg,val@ha; \ 26 addi reg,reg,val@l 27 #endif 28 29 /* 30 * Macro used to get to thread save registers. 31 * Note that entries 0-3 are used for the prolog code, and the remaining 32 * entries are available for specific exception use in the event a handler 33 * requires more than 4 scratch registers. 34 */ 35 #define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4)) 36 37 #ifdef CONFIG_PPC_FSL_BOOK3E 38 #define BOOKE_CLEAR_BTB(reg) \ 39 START_BTB_FLUSH_SECTION \ 40 BTB_FLUSH(reg) \ 41 END_BTB_FLUSH_SECTION 42 #else 43 #define BOOKE_CLEAR_BTB(reg) 44 #endif 45 46 47 #define NORMAL_EXCEPTION_PROLOG(intno) \ 48 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \ 49 mfspr r10, SPRN_SPRG_THREAD; \ 50 stw r11, THREAD_NORMSAVE(0)(r10); \ 51 stw r13, THREAD_NORMSAVE(2)(r10); \ 52 mfcr r13; /* save CR in r13 for now */\ 53 mfspr r11, SPRN_SRR1; \ 54 DO_KVM BOOKE_INTERRUPT_##intno SPRN_SRR1; \ 55 andi. r11, r11, MSR_PR; /* check whether user or kernel */\ 56 mr r11, r1; \ 57 beq 1f; \ 58 BOOKE_CLEAR_BTB(r11) \ 59 /* if from user, start at top of this thread's kernel stack */ \ 60 lwz r11, TASK_STACK - THREAD(r10); \ 61 ALLOC_STACK_FRAME(r11, THREAD_SIZE); \ 62 1 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \ 63 stw r13, _CCR(r11); /* save various registers */ \ 64 stw r12,GPR12(r11); \ 65 stw r9,GPR9(r11); \ 66 mfspr r13, SPRN_SPRG_RSCRATCH0; \ 67 stw r13, GPR10(r11); \ 68 lwz r12, THREAD_NORMSAVE(0)(r10); \ 69 stw r12,GPR11(r11); \ 70 lwz r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */ \ 71 mflr r10; \ 72 stw r10,_LINK(r11); \ 73 mfspr r12,SPRN_SRR0; \ 74 stw r1, GPR1(r11); \ 75 mfspr r9,SPRN_SRR1; \ 76 stw r1, 0(r11); \ 77 mr r1, r11; \ 78 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ 79 stw r0,GPR0(r11); \ 80 lis r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \ 81 addi r10, r10, STACK_FRAME_REGS_MARKER@l; \ 82 stw r10, 8(r11); \ 83 SAVE_4GPRS(3, r11); \ 84 SAVE_2GPRS(7, r11) 85 86 .macro SYSCALL_ENTRY trapno intno srr1 87 mfspr r10, SPRN_SPRG_THREAD 88 #ifdef CONFIG_KVM_BOOKE_HV 89 BEGIN_FTR_SECTION 90 mtspr SPRN_SPRG_WSCRATCH0, r10 91 stw r11, THREAD_NORMSAVE(0)(r10) 92 stw r13, THREAD_NORMSAVE(2)(r10) 93 mfcr r13 /* save CR in r13 for now */ 94 mfspr r11, SPRN_SRR1 95 mtocrf 0x80, r11 /* check MSR[GS] without clobbering reg */ 96 bf 3, 1975f 97 b kvmppc_handler_\intno\()_\srr1 98 1975: 99 mr r12, r13 100 lwz r13, THREAD_NORMSAVE(2)(r10) 101 FTR_SECTION_ELSE 102 #endif 103 mfcr r12 104 #ifdef CONFIG_KVM_BOOKE_HV 105 ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV) 106 #endif 107 mfspr r9, SPRN_SRR1 108 BOOKE_CLEAR_BTB(r11) 109 andi. r11, r9, MSR_PR 110 lwz r11, TASK_STACK - THREAD(r10) 111 rlwinm r12,r12,0,4,2 /* Clear SO bit in CR */ 112 beq- 99f 113 ALLOC_STACK_FRAME(r11, THREAD_SIZE - INT_FRAME_SIZE) 114 stw r12, _CCR(r11) /* save various registers */ 115 mflr r12 116 stw r12,_LINK(r11) 117 mfspr r12,SPRN_SRR0 118 stw r1, GPR1(r11) 119 stw r1, 0(r11) 120 mr r1, r11 121 stw r12,_NIP(r11) 122 rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */ 123 lis r12, STACK_FRAME_REGS_MARKER@ha /* exception frame marker */ 124 stw r2,GPR2(r11) 125 addi r12, r12, STACK_FRAME_REGS_MARKER@l 126 stw r9,_MSR(r11) 127 li r2, \trapno + 1 128 stw r12, 8(r11) 129 stw r2,_TRAP(r11) 130 SAVE_GPR(0, r11) 131 SAVE_4GPRS(3, r11) 132 SAVE_2GPRS(7, r11) 133 134 addi r11,r1,STACK_FRAME_OVERHEAD 135 addi r2,r10,-THREAD 136 stw r11,PT_REGS(r10) 137 /* Check to see if the dbcr0 register is set up to debug. Use the 138 internal debug mode bit to do this. */ 139 lwz r12,THREAD_DBCR0(r10) 140 andis. r12,r12,DBCR0_IDM@h 141 ACCOUNT_CPU_USER_ENTRY(r2, r11, r12) 142 beq+ 3f 143 /* From user and task is ptraced - load up global dbcr0 */ 144 li r12,-1 /* clear all pending debug events */ 145 mtspr SPRN_DBSR,r12 146 lis r11,global_dbcr0@ha 147 tophys(r11,r11) 148 addi r11,r11,global_dbcr0@l 149 #ifdef CONFIG_SMP 150 lwz r10, TASK_CPU(r2) 151 slwi r10, r10, 3 152 add r11, r11, r10 153 #endif 154 lwz r12,0(r11) 155 mtspr SPRN_DBCR0,r12 156 lwz r12,4(r11) 157 addi r12,r12,-1 158 stw r12,4(r11) 159 160 3: 161 tovirt(r2, r2) /* set r2 to current */ 162 lis r11, transfer_to_syscall@h 163 ori r11, r11, transfer_to_syscall@l 164 #ifdef CONFIG_TRACE_IRQFLAGS 165 /* 166 * If MSR is changing we need to keep interrupts disabled at this point 167 * otherwise we might risk taking an interrupt before we tell lockdep 168 * they are enabled. 169 */ 170 lis r10, MSR_KERNEL@h 171 ori r10, r10, MSR_KERNEL@l 172 rlwimi r10, r9, 0, MSR_EE 173 #else 174 lis r10, (MSR_KERNEL | MSR_EE)@h 175 ori r10, r10, (MSR_KERNEL | MSR_EE)@l 176 #endif 177 mtspr SPRN_SRR1,r10 178 mtspr SPRN_SRR0,r11 179 SYNC 180 RFI /* jump to handler, enable MMU */ 181 99: b ret_from_kernel_syscall 182 .endm 183 184 /* To handle the additional exception priority levels on 40x and Book-E 185 * processors we allocate a stack per additional priority level. 186 * 187 * On 40x critical is the only additional level 188 * On 44x/e500 we have critical and machine check 189 * On e200 we have critical and debug (machine check occurs via critical) 190 * 191 * Additionally we reserve a SPRG for each priority level so we can free up a 192 * GPR to use as the base for indirect access to the exception stacks. This 193 * is necessary since the MMU is always on, for Book-E parts, and the stacks 194 * are offset from KERNELBASE. 195 * 196 * There is some space optimization to be had here if desired. However 197 * to allow for a common kernel with support for debug exceptions either 198 * going to critical or their own debug level we aren't currently 199 * providing configurations that micro-optimize space usage. 200 */ 201 202 #define MC_STACK_BASE mcheckirq_ctx 203 #define CRIT_STACK_BASE critirq_ctx 204 205 /* only on e500mc/e200 */ 206 #define DBG_STACK_BASE dbgirq_ctx 207 208 #define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE) 209 210 #ifdef CONFIG_SMP 211 #define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ 212 mfspr r8,SPRN_PIR; \ 213 slwi r8,r8,2; \ 214 addis r8,r8,level##_STACK_BASE@ha; \ 215 lwz r8,level##_STACK_BASE@l(r8); \ 216 addi r8,r8,EXC_LVL_FRAME_OVERHEAD; 217 #else 218 #define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ 219 lis r8,level##_STACK_BASE@ha; \ 220 lwz r8,level##_STACK_BASE@l(r8); \ 221 addi r8,r8,EXC_LVL_FRAME_OVERHEAD; 222 #endif 223 224 /* 225 * Exception prolog for critical/machine check exceptions. This is a 226 * little different from the normal exception prolog above since a 227 * critical/machine check exception can potentially occur at any point 228 * during normal exception processing. Thus we cannot use the same SPRG 229 * registers as the normal prolog above. Instead we use a portion of the 230 * critical/machine check exception stack at low physical addresses. 231 */ 232 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, intno, exc_level_srr0, exc_level_srr1) \ 233 mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \ 234 BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ 235 stw r9,GPR9(r8); /* save various registers */\ 236 mfcr r9; /* save CR in r9 for now */\ 237 stw r10,GPR10(r8); \ 238 stw r11,GPR11(r8); \ 239 stw r9,_CCR(r8); /* save CR on stack */\ 240 mfspr r11,exc_level_srr1; /* check whether user or kernel */\ 241 DO_KVM BOOKE_INTERRUPT_##intno exc_level_srr1; \ 242 BOOKE_CLEAR_BTB(r10) \ 243 andi. r11,r11,MSR_PR; \ 244 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ 245 lwz r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\ 246 addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\ 247 beq 1f; \ 248 /* COMING FROM USER MODE */ \ 249 stw r9,_CCR(r11); /* save CR */\ 250 lwz r10,GPR10(r8); /* copy regs from exception stack */\ 251 lwz r9,GPR9(r8); \ 252 stw r10,GPR10(r11); \ 253 lwz r10,GPR11(r8); \ 254 stw r9,GPR9(r11); \ 255 stw r10,GPR11(r11); \ 256 b 2f; \ 257 /* COMING FROM PRIV MODE */ \ 258 1: mr r11, r8; \ 259 2: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \ 260 stw r12,GPR12(r11); /* save various registers */\ 261 mflr r10; \ 262 stw r10,_LINK(r11); \ 263 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ 264 stw r12,_DEAR(r11); /* since they may have had stuff */\ 265 mfspr r9,SPRN_ESR; /* in them at the point where the */\ 266 stw r9,_ESR(r11); /* exception was taken */\ 267 mfspr r12,exc_level_srr0; \ 268 stw r1,GPR1(r11); \ 269 mfspr r9,exc_level_srr1; \ 270 stw r1,0(r11); \ 271 mr r1,r11; \ 272 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ 273 stw r0,GPR0(r11); \ 274 SAVE_4GPRS(3, r11); \ 275 SAVE_2GPRS(7, r11) 276 277 #define CRITICAL_EXCEPTION_PROLOG(intno) \ 278 EXC_LEVEL_EXCEPTION_PROLOG(CRIT, intno, SPRN_CSRR0, SPRN_CSRR1) 279 #define DEBUG_EXCEPTION_PROLOG \ 280 EXC_LEVEL_EXCEPTION_PROLOG(DBG, DEBUG, SPRN_DSRR0, SPRN_DSRR1) 281 #define MCHECK_EXCEPTION_PROLOG \ 282 EXC_LEVEL_EXCEPTION_PROLOG(MC, MACHINE_CHECK, \ 283 SPRN_MCSRR0, SPRN_MCSRR1) 284 285 /* 286 * Guest Doorbell -- this is a bit odd in that uses GSRR0/1 despite 287 * being delivered to the host. This exception can only happen 288 * inside a KVM guest -- so we just handle up to the DO_KVM rather 289 * than try to fit this into one of the existing prolog macros. 290 */ 291 #define GUEST_DOORBELL_EXCEPTION \ 292 START_EXCEPTION(GuestDoorbell); \ 293 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \ 294 mfspr r10, SPRN_SPRG_THREAD; \ 295 stw r11, THREAD_NORMSAVE(0)(r10); \ 296 mfspr r11, SPRN_SRR1; \ 297 stw r13, THREAD_NORMSAVE(2)(r10); \ 298 mfcr r13; /* save CR in r13 for now */\ 299 DO_KVM BOOKE_INTERRUPT_GUEST_DBELL SPRN_GSRR1; \ 300 trap 301 302 /* 303 * Exception vectors. 304 */ 305 #define START_EXCEPTION(label) \ 306 .align 5; \ 307 label: 308 309 #define EXCEPTION(n, intno, label, hdlr, xfer) \ 310 START_EXCEPTION(label); \ 311 NORMAL_EXCEPTION_PROLOG(intno); \ 312 addi r3,r1,STACK_FRAME_OVERHEAD; \ 313 xfer(n, hdlr) 314 315 #define CRITICAL_EXCEPTION(n, intno, label, hdlr) \ 316 START_EXCEPTION(label); \ 317 CRITICAL_EXCEPTION_PROLOG(intno); \ 318 addi r3,r1,STACK_FRAME_OVERHEAD; \ 319 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ 320 crit_transfer_to_handler, ret_from_crit_exc) 321 322 #define MCHECK_EXCEPTION(n, label, hdlr) \ 323 START_EXCEPTION(label); \ 324 MCHECK_EXCEPTION_PROLOG; \ 325 mfspr r5,SPRN_ESR; \ 326 stw r5,_ESR(r11); \ 327 addi r3,r1,STACK_FRAME_OVERHEAD; \ 328 EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ 329 mcheck_transfer_to_handler, ret_from_mcheck_exc) 330 331 #define EXC_XFER_TEMPLATE(hdlr, trap, msr, tfer, ret) \ 332 li r10,trap; \ 333 stw r10,_TRAP(r11); \ 334 lis r10,msr@h; \ 335 ori r10,r10,msr@l; \ 336 bl tfer; \ 337 .long hdlr; \ 338 .long ret 339 340 #define EXC_XFER_STD(n, hdlr) \ 341 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, transfer_to_handler_full, \ 342 ret_from_except_full) 343 344 #define EXC_XFER_LITE(n, hdlr) \ 345 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \ 346 ret_from_except) 347 348 /* Check for a single step debug exception while in an exception 349 * handler before state has been saved. This is to catch the case 350 * where an instruction that we are trying to single step causes 351 * an exception (eg ITLB/DTLB miss) and thus the first instruction of 352 * the exception handler generates a single step debug exception. 353 * 354 * If we get a debug trap on the first instruction of an exception handler, 355 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is 356 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR). 357 * The exception handler was handling a non-critical interrupt, so it will 358 * save (and later restore) the MSR via SPRN_CSRR1, which will still have 359 * the MSR_DE bit set. 360 */ 361 #define DEBUG_DEBUG_EXCEPTION \ 362 START_EXCEPTION(DebugDebug); \ 363 DEBUG_EXCEPTION_PROLOG; \ 364 \ 365 /* \ 366 * If there is a single step or branch-taken exception in an \ 367 * exception entry sequence, it was probably meant to apply to \ 368 * the code where the exception occurred (since exception entry \ 369 * doesn't turn off DE automatically). We simulate the effect \ 370 * of turning off DE on entry to an exception handler by turning \ 371 * off DE in the DSRR1 value and clearing the debug status. \ 372 */ \ 373 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ 374 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \ 375 beq+ 2f; \ 376 \ 377 lis r10,interrupt_base@h; /* check if exception in vectors */ \ 378 ori r10,r10,interrupt_base@l; \ 379 cmplw r12,r10; \ 380 blt+ 2f; /* addr below exception vectors */ \ 381 \ 382 lis r10,interrupt_end@h; \ 383 ori r10,r10,interrupt_end@l; \ 384 cmplw r12,r10; \ 385 bgt+ 2f; /* addr above exception vectors */ \ 386 \ 387 /* here it looks like we got an inappropriate debug exception. */ \ 388 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \ 389 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \ 390 mtspr SPRN_DBSR,r10; \ 391 /* restore state and get out */ \ 392 lwz r10,_CCR(r11); \ 393 lwz r0,GPR0(r11); \ 394 lwz r1,GPR1(r11); \ 395 mtcrf 0x80,r10; \ 396 mtspr SPRN_DSRR0,r12; \ 397 mtspr SPRN_DSRR1,r9; \ 398 lwz r9,GPR9(r11); \ 399 lwz r12,GPR12(r11); \ 400 mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \ 401 BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \ 402 lwz r10,GPR10(r8); \ 403 lwz r11,GPR11(r8); \ 404 mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \ 405 \ 406 PPC_RFDI; \ 407 b .; \ 408 \ 409 /* continue normal handling for a debug exception... */ \ 410 2: mfspr r4,SPRN_DBSR; \ 411 addi r3,r1,STACK_FRAME_OVERHEAD; \ 412 EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), debug_transfer_to_handler, ret_from_debug_exc) 413 414 #define DEBUG_CRIT_EXCEPTION \ 415 START_EXCEPTION(DebugCrit); \ 416 CRITICAL_EXCEPTION_PROLOG(DEBUG); \ 417 \ 418 /* \ 419 * If there is a single step or branch-taken exception in an \ 420 * exception entry sequence, it was probably meant to apply to \ 421 * the code where the exception occurred (since exception entry \ 422 * doesn't turn off DE automatically). We simulate the effect \ 423 * of turning off DE on entry to an exception handler by turning \ 424 * off DE in the CSRR1 value and clearing the debug status. \ 425 */ \ 426 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ 427 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \ 428 beq+ 2f; \ 429 \ 430 lis r10,interrupt_base@h; /* check if exception in vectors */ \ 431 ori r10,r10,interrupt_base@l; \ 432 cmplw r12,r10; \ 433 blt+ 2f; /* addr below exception vectors */ \ 434 \ 435 lis r10,interrupt_end@h; \ 436 ori r10,r10,interrupt_end@l; \ 437 cmplw r12,r10; \ 438 bgt+ 2f; /* addr above exception vectors */ \ 439 \ 440 /* here it looks like we got an inappropriate debug exception. */ \ 441 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \ 442 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \ 443 mtspr SPRN_DBSR,r10; \ 444 /* restore state and get out */ \ 445 lwz r10,_CCR(r11); \ 446 lwz r0,GPR0(r11); \ 447 lwz r1,GPR1(r11); \ 448 mtcrf 0x80,r10; \ 449 mtspr SPRN_CSRR0,r12; \ 450 mtspr SPRN_CSRR1,r9; \ 451 lwz r9,GPR9(r11); \ 452 lwz r12,GPR12(r11); \ 453 mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \ 454 BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ 455 lwz r10,GPR10(r8); \ 456 lwz r11,GPR11(r8); \ 457 mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \ 458 \ 459 rfci; \ 460 b .; \ 461 \ 462 /* continue normal handling for a critical exception... */ \ 463 2: mfspr r4,SPRN_DBSR; \ 464 addi r3,r1,STACK_FRAME_OVERHEAD; \ 465 EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), crit_transfer_to_handler, ret_from_crit_exc) 466 467 #define DATA_STORAGE_EXCEPTION \ 468 START_EXCEPTION(DataStorage) \ 469 NORMAL_EXCEPTION_PROLOG(DATA_STORAGE); \ 470 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \ 471 stw r5,_ESR(r11); \ 472 mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \ 473 stw r4, _DEAR(r11); \ 474 EXC_XFER_LITE(0x0300, handle_page_fault) 475 476 #define INSTRUCTION_STORAGE_EXCEPTION \ 477 START_EXCEPTION(InstructionStorage) \ 478 NORMAL_EXCEPTION_PROLOG(INST_STORAGE); \ 479 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \ 480 stw r5,_ESR(r11); \ 481 mr r4,r12; /* Pass SRR0 as arg2 */ \ 482 stw r4, _DEAR(r11); \ 483 li r5,0; /* Pass zero as arg3 */ \ 484 EXC_XFER_LITE(0x0400, handle_page_fault) 485 486 #define ALIGNMENT_EXCEPTION \ 487 START_EXCEPTION(Alignment) \ 488 NORMAL_EXCEPTION_PROLOG(ALIGNMENT); \ 489 mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \ 490 stw r4,_DEAR(r11); \ 491 addi r3,r1,STACK_FRAME_OVERHEAD; \ 492 EXC_XFER_STD(0x0600, alignment_exception) 493 494 #define PROGRAM_EXCEPTION \ 495 START_EXCEPTION(Program) \ 496 NORMAL_EXCEPTION_PROLOG(PROGRAM); \ 497 mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \ 498 stw r4,_ESR(r11); \ 499 addi r3,r1,STACK_FRAME_OVERHEAD; \ 500 EXC_XFER_STD(0x0700, program_check_exception) 501 502 #define DECREMENTER_EXCEPTION \ 503 START_EXCEPTION(Decrementer) \ 504 NORMAL_EXCEPTION_PROLOG(DECREMENTER); \ 505 lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \ 506 mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \ 507 addi r3,r1,STACK_FRAME_OVERHEAD; \ 508 EXC_XFER_LITE(0x0900, timer_interrupt) 509 510 #define FP_UNAVAILABLE_EXCEPTION \ 511 START_EXCEPTION(FloatingPointUnavailable) \ 512 NORMAL_EXCEPTION_PROLOG(FP_UNAVAIL); \ 513 beq 1f; \ 514 bl load_up_fpu; /* if from user, just load it up */ \ 515 b fast_exception_return; \ 516 1: addi r3,r1,STACK_FRAME_OVERHEAD; \ 517 EXC_XFER_STD(0x800, kernel_fp_unavailable_exception) 518 519 #else /* __ASSEMBLY__ */ 520 struct exception_regs { 521 unsigned long mas0; 522 unsigned long mas1; 523 unsigned long mas2; 524 unsigned long mas3; 525 unsigned long mas6; 526 unsigned long mas7; 527 unsigned long srr0; 528 unsigned long srr1; 529 unsigned long csrr0; 530 unsigned long csrr1; 531 unsigned long dsrr0; 532 unsigned long dsrr1; 533 unsigned long saved_ksp_limit; 534 }; 535 536 /* ensure this structure is always sized to a multiple of the stack alignment */ 537 #define STACK_EXC_LVL_FRAME_SIZE ALIGN(sizeof (struct exception_regs), 16) 538 539 #endif /* __ASSEMBLY__ */ 540 #endif /* __HEAD_BOOKE_H__ */ 541