1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef __HEAD_BOOKE_H__ 3 #define __HEAD_BOOKE_H__ 4 5 #include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */ 6 #include <asm/kvm_asm.h> 7 #include <asm/kvm_booke_hv_asm.h> 8 9 #ifdef __ASSEMBLY__ 10 11 /* 12 * Macros used for common Book-e exception handling 13 */ 14 15 #define SET_IVOR(vector_number, vector_label) \ 16 li r26,vector_label@l; \ 17 mtspr SPRN_IVOR##vector_number,r26; \ 18 sync 19 20 #if (THREAD_SHIFT < 15) 21 #define ALLOC_STACK_FRAME(reg, val) \ 22 addi reg,reg,val 23 #else 24 #define ALLOC_STACK_FRAME(reg, val) \ 25 addis reg,reg,val@ha; \ 26 addi reg,reg,val@l 27 #endif 28 29 /* 30 * Macro used to get to thread save registers. 31 * Note that entries 0-3 are used for the prolog code, and the remaining 32 * entries are available for specific exception use in the event a handler 33 * requires more than 4 scratch registers. 34 */ 35 #define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4)) 36 37 #ifdef CONFIG_PPC_FSL_BOOK3E 38 #define BOOKE_CLEAR_BTB(reg) \ 39 START_BTB_FLUSH_SECTION \ 40 BTB_FLUSH(reg) \ 41 END_BTB_FLUSH_SECTION 42 #else 43 #define BOOKE_CLEAR_BTB(reg) 44 #endif 45 46 47 #define NORMAL_EXCEPTION_PROLOG(trapno, intno) \ 48 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \ 49 mfspr r10, SPRN_SPRG_THREAD; \ 50 stw r11, THREAD_NORMSAVE(0)(r10); \ 51 stw r13, THREAD_NORMSAVE(2)(r10); \ 52 mfcr r13; /* save CR in r13 for now */\ 53 mfspr r11, SPRN_SRR1; \ 54 DO_KVM BOOKE_INTERRUPT_##intno SPRN_SRR1; \ 55 andi. r11, r11, MSR_PR; /* check whether user or kernel */\ 56 LOAD_REG_IMMEDIATE(r11, MSR_KERNEL); \ 57 mtmsr r11; \ 58 mr r11, r1; \ 59 beq 1f; \ 60 BOOKE_CLEAR_BTB(r11) \ 61 /* if from user, start at top of this thread's kernel stack */ \ 62 lwz r11, TASK_STACK - THREAD(r10); \ 63 ALLOC_STACK_FRAME(r11, THREAD_SIZE); \ 64 1 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \ 65 stw r13, _CCR(r11); /* save various registers */ \ 66 stw r12,GPR12(r11); \ 67 stw r9,GPR9(r11); \ 68 mfspr r13, SPRN_SPRG_RSCRATCH0; \ 69 stw r13, GPR10(r11); \ 70 lwz r12, THREAD_NORMSAVE(0)(r10); \ 71 stw r12,GPR11(r11); \ 72 lwz r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */ \ 73 mflr r10; \ 74 stw r10,_LINK(r11); \ 75 mfspr r12,SPRN_SRR0; \ 76 stw r1, GPR1(r11); \ 77 mfspr r9,SPRN_SRR1; \ 78 stw r1, 0(r11); \ 79 mr r1, r11; \ 80 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ 81 COMMON_EXCEPTION_PROLOG_END trapno 82 83 .macro COMMON_EXCEPTION_PROLOG_END trapno 84 stw r0,GPR0(r1) 85 lis r10, STACK_FRAME_REGS_MARKER@ha /* exception frame marker */ 86 addi r10, r10, STACK_FRAME_REGS_MARKER@l 87 stw r10, 8(r1) 88 li r10, \trapno 89 stw r10,_TRAP(r1) 90 SAVE_4GPRS(3, r1) 91 SAVE_2GPRS(7, r1) 92 SAVE_NVGPRS(r1) 93 stw r2,GPR2(r1) 94 stw r12,_NIP(r1) 95 stw r9,_MSR(r1) 96 mfctr r10 97 mfspr r2,SPRN_SPRG_THREAD 98 stw r10,_CTR(r1) 99 tovirt(r2, r2) 100 mfspr r10,SPRN_XER 101 addi r2, r2, -THREAD 102 stw r10,_XER(r1) 103 addi r3,r1,STACK_FRAME_OVERHEAD 104 .endm 105 106 .macro prepare_transfer_to_handler 107 #ifdef CONFIG_E500 108 andi. r12,r9,MSR_PR 109 bne 777f 110 bl prepare_transfer_to_handler 111 777: 112 #endif 113 .endm 114 115 .macro SYSCALL_ENTRY trapno intno srr1 116 mfspr r10, SPRN_SPRG_THREAD 117 #ifdef CONFIG_KVM_BOOKE_HV 118 BEGIN_FTR_SECTION 119 mtspr SPRN_SPRG_WSCRATCH0, r10 120 stw r11, THREAD_NORMSAVE(0)(r10) 121 stw r13, THREAD_NORMSAVE(2)(r10) 122 mfcr r13 /* save CR in r13 for now */ 123 mfspr r11, SPRN_SRR1 124 mtocrf 0x80, r11 /* check MSR[GS] without clobbering reg */ 125 bf 3, 1975f 126 b kvmppc_handler_\intno\()_\srr1 127 1975: 128 mr r12, r13 129 lwz r13, THREAD_NORMSAVE(2)(r10) 130 FTR_SECTION_ELSE 131 mfcr r12 132 ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV) 133 #else 134 mfcr r12 135 #endif 136 mfspr r9, SPRN_SRR1 137 BOOKE_CLEAR_BTB(r11) 138 mr r11, r1 139 lwz r1, TASK_STACK - THREAD(r10) 140 rlwinm r12,r12,0,4,2 /* Clear SO bit in CR */ 141 ALLOC_STACK_FRAME(r1, THREAD_SIZE - INT_FRAME_SIZE) 142 stw r12, _CCR(r1) 143 mfspr r12,SPRN_SRR0 144 stw r12,_NIP(r1) 145 b transfer_to_syscall /* jump to handler */ 146 .endm 147 148 /* To handle the additional exception priority levels on 40x and Book-E 149 * processors we allocate a stack per additional priority level. 150 * 151 * On 40x critical is the only additional level 152 * On 44x/e500 we have critical and machine check 153 * 154 * Additionally we reserve a SPRG for each priority level so we can free up a 155 * GPR to use as the base for indirect access to the exception stacks. This 156 * is necessary since the MMU is always on, for Book-E parts, and the stacks 157 * are offset from KERNELBASE. 158 * 159 * There is some space optimization to be had here if desired. However 160 * to allow for a common kernel with support for debug exceptions either 161 * going to critical or their own debug level we aren't currently 162 * providing configurations that micro-optimize space usage. 163 */ 164 165 #define MC_STACK_BASE mcheckirq_ctx 166 #define CRIT_STACK_BASE critirq_ctx 167 168 /* only on e500mc */ 169 #define DBG_STACK_BASE dbgirq_ctx 170 171 #ifdef CONFIG_SMP 172 #define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ 173 mfspr r8,SPRN_PIR; \ 174 slwi r8,r8,2; \ 175 addis r8,r8,level##_STACK_BASE@ha; \ 176 lwz r8,level##_STACK_BASE@l(r8); \ 177 addi r8,r8,THREAD_SIZE - INT_FRAME_SIZE; 178 #else 179 #define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ 180 lis r8,level##_STACK_BASE@ha; \ 181 lwz r8,level##_STACK_BASE@l(r8); \ 182 addi r8,r8,THREAD_SIZE - INT_FRAME_SIZE; 183 #endif 184 185 /* 186 * Exception prolog for critical/machine check exceptions. This is a 187 * little different from the normal exception prolog above since a 188 * critical/machine check exception can potentially occur at any point 189 * during normal exception processing. Thus we cannot use the same SPRG 190 * registers as the normal prolog above. Instead we use a portion of the 191 * critical/machine check exception stack at low physical addresses. 192 */ 193 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, trapno, intno, exc_level_srr0, exc_level_srr1) \ 194 mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \ 195 BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ 196 stw r9,GPR9(r8); /* save various registers */\ 197 mfcr r9; /* save CR in r9 for now */\ 198 stw r10,GPR10(r8); \ 199 stw r11,GPR11(r8); \ 200 stw r9,_CCR(r8); /* save CR on stack */\ 201 mfspr r11,exc_level_srr1; /* check whether user or kernel */\ 202 DO_KVM BOOKE_INTERRUPT_##intno exc_level_srr1; \ 203 BOOKE_CLEAR_BTB(r10) \ 204 andi. r11,r11,MSR_PR; \ 205 LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \ 206 mtmsr r11; \ 207 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ 208 lwz r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\ 209 addi r11,r11,THREAD_SIZE - INT_FRAME_SIZE; /* allocate stack frame */\ 210 beq 1f; \ 211 /* COMING FROM USER MODE */ \ 212 stw r9,_CCR(r11); /* save CR */\ 213 lwz r10,GPR10(r8); /* copy regs from exception stack */\ 214 lwz r9,GPR9(r8); \ 215 stw r10,GPR10(r11); \ 216 lwz r10,GPR11(r8); \ 217 stw r9,GPR9(r11); \ 218 stw r10,GPR11(r11); \ 219 b 2f; \ 220 /* COMING FROM PRIV MODE */ \ 221 1: mr r11, r8; \ 222 2: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \ 223 stw r12,GPR12(r11); /* save various registers */\ 224 mflr r10; \ 225 stw r10,_LINK(r11); \ 226 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ 227 stw r12,_DEAR(r11); /* since they may have had stuff */\ 228 mfspr r9,SPRN_ESR; /* in them at the point where the */\ 229 stw r9,_ESR(r11); /* exception was taken */\ 230 mfspr r12,exc_level_srr0; \ 231 stw r1,GPR1(r11); \ 232 mfspr r9,exc_level_srr1; \ 233 stw r1,0(r11); \ 234 mr r1,r11; \ 235 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ 236 COMMON_EXCEPTION_PROLOG_END trapno 237 238 #define SAVE_xSRR(xSRR) \ 239 mfspr r0,SPRN_##xSRR##0; \ 240 stw r0,_##xSRR##0(r1); \ 241 mfspr r0,SPRN_##xSRR##1; \ 242 stw r0,_##xSRR##1(r1) 243 244 245 .macro SAVE_MMU_REGS 246 #ifdef CONFIG_PPC_BOOK3E_MMU 247 mfspr r0,SPRN_MAS0 248 stw r0,MAS0(r1) 249 mfspr r0,SPRN_MAS1 250 stw r0,MAS1(r1) 251 mfspr r0,SPRN_MAS2 252 stw r0,MAS2(r1) 253 mfspr r0,SPRN_MAS3 254 stw r0,MAS3(r1) 255 mfspr r0,SPRN_MAS6 256 stw r0,MAS6(r1) 257 #ifdef CONFIG_PHYS_64BIT 258 mfspr r0,SPRN_MAS7 259 stw r0,MAS7(r1) 260 #endif /* CONFIG_PHYS_64BIT */ 261 #endif /* CONFIG_PPC_BOOK3E_MMU */ 262 #ifdef CONFIG_44x 263 mfspr r0,SPRN_MMUCR 264 stw r0,MMUCR(r1) 265 #endif 266 .endm 267 268 #define CRITICAL_EXCEPTION_PROLOG(trapno, intno) \ 269 EXC_LEVEL_EXCEPTION_PROLOG(CRIT, trapno+2, intno, SPRN_CSRR0, SPRN_CSRR1) 270 #define DEBUG_EXCEPTION_PROLOG(trapno) \ 271 EXC_LEVEL_EXCEPTION_PROLOG(DBG, trapno+8, DEBUG, SPRN_DSRR0, SPRN_DSRR1) 272 #define MCHECK_EXCEPTION_PROLOG(trapno) \ 273 EXC_LEVEL_EXCEPTION_PROLOG(MC, trapno+4, MACHINE_CHECK, \ 274 SPRN_MCSRR0, SPRN_MCSRR1) 275 276 /* 277 * Guest Doorbell -- this is a bit odd in that uses GSRR0/1 despite 278 * being delivered to the host. This exception can only happen 279 * inside a KVM guest -- so we just handle up to the DO_KVM rather 280 * than try to fit this into one of the existing prolog macros. 281 */ 282 #define GUEST_DOORBELL_EXCEPTION \ 283 START_EXCEPTION(GuestDoorbell); \ 284 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \ 285 mfspr r10, SPRN_SPRG_THREAD; \ 286 stw r11, THREAD_NORMSAVE(0)(r10); \ 287 mfspr r11, SPRN_SRR1; \ 288 stw r13, THREAD_NORMSAVE(2)(r10); \ 289 mfcr r13; /* save CR in r13 for now */\ 290 DO_KVM BOOKE_INTERRUPT_GUEST_DBELL SPRN_GSRR1; \ 291 trap 292 293 /* 294 * Exception vectors. 295 */ 296 #define START_EXCEPTION(label) \ 297 .align 5; \ 298 label: 299 300 #define EXCEPTION(n, intno, label, hdlr) \ 301 START_EXCEPTION(label); \ 302 NORMAL_EXCEPTION_PROLOG(n, intno); \ 303 prepare_transfer_to_handler; \ 304 bl hdlr; \ 305 b interrupt_return 306 307 #define CRITICAL_EXCEPTION(n, intno, label, hdlr) \ 308 START_EXCEPTION(label); \ 309 CRITICAL_EXCEPTION_PROLOG(n, intno); \ 310 SAVE_MMU_REGS; \ 311 SAVE_xSRR(SRR); \ 312 prepare_transfer_to_handler; \ 313 bl hdlr; \ 314 b ret_from_crit_exc 315 316 #define MCHECK_EXCEPTION(n, label, hdlr) \ 317 START_EXCEPTION(label); \ 318 MCHECK_EXCEPTION_PROLOG(n); \ 319 mfspr r5,SPRN_ESR; \ 320 stw r5,_ESR(r11); \ 321 SAVE_xSRR(DSRR); \ 322 SAVE_xSRR(CSRR); \ 323 SAVE_MMU_REGS; \ 324 SAVE_xSRR(SRR); \ 325 prepare_transfer_to_handler; \ 326 bl hdlr; \ 327 b ret_from_mcheck_exc 328 329 /* Check for a single step debug exception while in an exception 330 * handler before state has been saved. This is to catch the case 331 * where an instruction that we are trying to single step causes 332 * an exception (eg ITLB/DTLB miss) and thus the first instruction of 333 * the exception handler generates a single step debug exception. 334 * 335 * If we get a debug trap on the first instruction of an exception handler, 336 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is 337 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR). 338 * The exception handler was handling a non-critical interrupt, so it will 339 * save (and later restore) the MSR via SPRN_CSRR1, which will still have 340 * the MSR_DE bit set. 341 */ 342 #define DEBUG_DEBUG_EXCEPTION \ 343 START_EXCEPTION(DebugDebug); \ 344 DEBUG_EXCEPTION_PROLOG(2000); \ 345 \ 346 /* \ 347 * If there is a single step or branch-taken exception in an \ 348 * exception entry sequence, it was probably meant to apply to \ 349 * the code where the exception occurred (since exception entry \ 350 * doesn't turn off DE automatically). We simulate the effect \ 351 * of turning off DE on entry to an exception handler by turning \ 352 * off DE in the DSRR1 value and clearing the debug status. \ 353 */ \ 354 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ 355 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \ 356 beq+ 2f; \ 357 \ 358 lis r10,interrupt_base@h; /* check if exception in vectors */ \ 359 ori r10,r10,interrupt_base@l; \ 360 cmplw r12,r10; \ 361 blt+ 2f; /* addr below exception vectors */ \ 362 \ 363 lis r10,interrupt_end@h; \ 364 ori r10,r10,interrupt_end@l; \ 365 cmplw r12,r10; \ 366 bgt+ 2f; /* addr above exception vectors */ \ 367 \ 368 /* here it looks like we got an inappropriate debug exception. */ \ 369 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \ 370 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \ 371 mtspr SPRN_DBSR,r10; \ 372 /* restore state and get out */ \ 373 lwz r10,_CCR(r11); \ 374 lwz r0,GPR0(r11); \ 375 lwz r1,GPR1(r11); \ 376 mtcrf 0x80,r10; \ 377 mtspr SPRN_DSRR0,r12; \ 378 mtspr SPRN_DSRR1,r9; \ 379 lwz r9,GPR9(r11); \ 380 lwz r12,GPR12(r11); \ 381 mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \ 382 BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \ 383 lwz r10,GPR10(r8); \ 384 lwz r11,GPR11(r8); \ 385 mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \ 386 \ 387 PPC_RFDI; \ 388 b .; \ 389 \ 390 /* continue normal handling for a debug exception... */ \ 391 2: mfspr r4,SPRN_DBSR; \ 392 stw r4,_ESR(r11); /* DebugException takes DBSR in _ESR */\ 393 SAVE_xSRR(CSRR); \ 394 SAVE_MMU_REGS; \ 395 SAVE_xSRR(SRR); \ 396 prepare_transfer_to_handler; \ 397 bl DebugException; \ 398 b ret_from_debug_exc 399 400 #define DEBUG_CRIT_EXCEPTION \ 401 START_EXCEPTION(DebugCrit); \ 402 CRITICAL_EXCEPTION_PROLOG(2000,DEBUG); \ 403 \ 404 /* \ 405 * If there is a single step or branch-taken exception in an \ 406 * exception entry sequence, it was probably meant to apply to \ 407 * the code where the exception occurred (since exception entry \ 408 * doesn't turn off DE automatically). We simulate the effect \ 409 * of turning off DE on entry to an exception handler by turning \ 410 * off DE in the CSRR1 value and clearing the debug status. \ 411 */ \ 412 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ 413 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \ 414 beq+ 2f; \ 415 \ 416 lis r10,interrupt_base@h; /* check if exception in vectors */ \ 417 ori r10,r10,interrupt_base@l; \ 418 cmplw r12,r10; \ 419 blt+ 2f; /* addr below exception vectors */ \ 420 \ 421 lis r10,interrupt_end@h; \ 422 ori r10,r10,interrupt_end@l; \ 423 cmplw r12,r10; \ 424 bgt+ 2f; /* addr above exception vectors */ \ 425 \ 426 /* here it looks like we got an inappropriate debug exception. */ \ 427 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \ 428 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \ 429 mtspr SPRN_DBSR,r10; \ 430 /* restore state and get out */ \ 431 lwz r10,_CCR(r11); \ 432 lwz r0,GPR0(r11); \ 433 lwz r1,GPR1(r11); \ 434 mtcrf 0x80,r10; \ 435 mtspr SPRN_CSRR0,r12; \ 436 mtspr SPRN_CSRR1,r9; \ 437 lwz r9,GPR9(r11); \ 438 lwz r12,GPR12(r11); \ 439 mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \ 440 BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ 441 lwz r10,GPR10(r8); \ 442 lwz r11,GPR11(r8); \ 443 mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \ 444 \ 445 rfci; \ 446 b .; \ 447 \ 448 /* continue normal handling for a critical exception... */ \ 449 2: mfspr r4,SPRN_DBSR; \ 450 stw r4,_ESR(r11); /* DebugException takes DBSR in _ESR */\ 451 SAVE_MMU_REGS; \ 452 SAVE_xSRR(SRR); \ 453 prepare_transfer_to_handler; \ 454 bl DebugException; \ 455 b ret_from_crit_exc 456 457 #define DATA_STORAGE_EXCEPTION \ 458 START_EXCEPTION(DataStorage) \ 459 NORMAL_EXCEPTION_PROLOG(0x300, DATA_STORAGE); \ 460 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \ 461 stw r5,_ESR(r11); \ 462 mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \ 463 stw r4, _DEAR(r11); \ 464 prepare_transfer_to_handler; \ 465 bl do_page_fault; \ 466 b interrupt_return 467 468 /* 469 * Instruction TLB Error interrupt handlers may call InstructionStorage 470 * directly without clearing ESR, so the ESR at this point may be left over 471 * from a prior interrupt. 472 * 473 * In any case, do_page_fault for BOOK3E does not use ESR and always expects 474 * dsisr to be 0. ESR_DST from a prior store in particular would confuse fault 475 * handling. 476 */ 477 #define INSTRUCTION_STORAGE_EXCEPTION \ 478 START_EXCEPTION(InstructionStorage) \ 479 NORMAL_EXCEPTION_PROLOG(0x400, INST_STORAGE); \ 480 li r5,0; /* Store 0 in regs->esr (dsisr) */ \ 481 stw r5,_ESR(r11); \ 482 stw r12, _DEAR(r11); /* Set regs->dear (dar) to SRR0 */ \ 483 prepare_transfer_to_handler; \ 484 bl do_page_fault; \ 485 b interrupt_return 486 487 #define ALIGNMENT_EXCEPTION \ 488 START_EXCEPTION(Alignment) \ 489 NORMAL_EXCEPTION_PROLOG(0x600, ALIGNMENT); \ 490 mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \ 491 stw r4,_DEAR(r11); \ 492 prepare_transfer_to_handler; \ 493 bl alignment_exception; \ 494 REST_NVGPRS(r1); \ 495 b interrupt_return 496 497 #define PROGRAM_EXCEPTION \ 498 START_EXCEPTION(Program) \ 499 NORMAL_EXCEPTION_PROLOG(0x700, PROGRAM); \ 500 mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \ 501 stw r4,_ESR(r11); \ 502 prepare_transfer_to_handler; \ 503 bl program_check_exception; \ 504 REST_NVGPRS(r1); \ 505 b interrupt_return 506 507 #define DECREMENTER_EXCEPTION \ 508 START_EXCEPTION(Decrementer) \ 509 NORMAL_EXCEPTION_PROLOG(0x900, DECREMENTER); \ 510 lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \ 511 mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \ 512 prepare_transfer_to_handler; \ 513 bl timer_interrupt; \ 514 b interrupt_return 515 516 #define FP_UNAVAILABLE_EXCEPTION \ 517 START_EXCEPTION(FloatingPointUnavailable) \ 518 NORMAL_EXCEPTION_PROLOG(0x800, FP_UNAVAIL); \ 519 beq 1f; \ 520 bl load_up_fpu; /* if from user, just load it up */ \ 521 b fast_exception_return; \ 522 1: prepare_transfer_to_handler; \ 523 bl kernel_fp_unavailable_exception; \ 524 b interrupt_return 525 526 #endif /* __ASSEMBLY__ */ 527 #endif /* __HEAD_BOOKE_H__ */ 528