1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef __HEAD_BOOKE_H__ 3 #define __HEAD_BOOKE_H__ 4 5 #include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */ 6 #include <asm/kvm_asm.h> 7 #include <asm/kvm_booke_hv_asm.h> 8 9 #ifdef __ASSEMBLY__ 10 11 /* 12 * Macros used for common Book-e exception handling 13 */ 14 15 #define SET_IVOR(vector_number, vector_label) \ 16 li r26,vector_label@l; \ 17 mtspr SPRN_IVOR##vector_number,r26; \ 18 sync 19 20 #if (THREAD_SHIFT < 15) 21 #define ALLOC_STACK_FRAME(reg, val) \ 22 addi reg,reg,val 23 #else 24 #define ALLOC_STACK_FRAME(reg, val) \ 25 addis reg,reg,val@ha; \ 26 addi reg,reg,val@l 27 #endif 28 29 /* 30 * Macro used to get to thread save registers. 31 * Note that entries 0-3 are used for the prolog code, and the remaining 32 * entries are available for specific exception use in the event a handler 33 * requires more than 4 scratch registers. 34 */ 35 #define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4)) 36 37 #ifdef CONFIG_PPC_FSL_BOOK3E 38 #define BOOKE_CLEAR_BTB(reg) \ 39 START_BTB_FLUSH_SECTION \ 40 BTB_FLUSH(reg) \ 41 END_BTB_FLUSH_SECTION 42 #else 43 #define BOOKE_CLEAR_BTB(reg) 44 #endif 45 46 47 #define NORMAL_EXCEPTION_PROLOG(intno) \ 48 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \ 49 mfspr r10, SPRN_SPRG_THREAD; \ 50 stw r11, THREAD_NORMSAVE(0)(r10); \ 51 stw r13, THREAD_NORMSAVE(2)(r10); \ 52 mfcr r13; /* save CR in r13 for now */\ 53 mfspr r11, SPRN_SRR1; \ 54 DO_KVM BOOKE_INTERRUPT_##intno SPRN_SRR1; \ 55 andi. r11, r11, MSR_PR; /* check whether user or kernel */\ 56 mr r11, r1; \ 57 beq 1f; \ 58 BOOKE_CLEAR_BTB(r11) \ 59 /* if from user, start at top of this thread's kernel stack */ \ 60 lwz r11, TASK_STACK - THREAD(r10); \ 61 ALLOC_STACK_FRAME(r11, THREAD_SIZE); \ 62 1 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \ 63 stw r13, _CCR(r11); /* save various registers */ \ 64 stw r12,GPR12(r11); \ 65 stw r9,GPR9(r11); \ 66 mfspr r13, SPRN_SPRG_RSCRATCH0; \ 67 stw r13, GPR10(r11); \ 68 lwz r12, THREAD_NORMSAVE(0)(r10); \ 69 stw r12,GPR11(r11); \ 70 lwz r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */ \ 71 mflr r10; \ 72 stw r10,_LINK(r11); \ 73 mfspr r12,SPRN_SRR0; \ 74 stw r1, GPR1(r11); \ 75 mfspr r9,SPRN_SRR1; \ 76 stw r1, 0(r11); \ 77 mr r1, r11; \ 78 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ 79 stw r0,GPR0(r11); \ 80 lis r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \ 81 addi r10, r10, STACK_FRAME_REGS_MARKER@l; \ 82 stw r10, 8(r11); \ 83 SAVE_4GPRS(3, r11); \ 84 SAVE_2GPRS(7, r11) 85 86 .macro SYSCALL_ENTRY trapno intno srr1 87 mfspr r10, SPRN_SPRG_THREAD 88 #ifdef CONFIG_KVM_BOOKE_HV 89 BEGIN_FTR_SECTION 90 mtspr SPRN_SPRG_WSCRATCH0, r10 91 stw r11, THREAD_NORMSAVE(0)(r10) 92 stw r13, THREAD_NORMSAVE(2)(r10) 93 mfcr r13 /* save CR in r13 for now */ 94 mfspr r11, SPRN_SRR1 95 mtocrf 0x80, r11 /* check MSR[GS] without clobbering reg */ 96 bf 3, 1975f 97 b kvmppc_handler_\intno\()_\srr1 98 1975: 99 mr r12, r13 100 lwz r13, THREAD_NORMSAVE(2)(r10) 101 FTR_SECTION_ELSE 102 #endif 103 mfcr r12 104 #ifdef CONFIG_KVM_BOOKE_HV 105 ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV) 106 #endif 107 BOOKE_CLEAR_BTB(r11) 108 lwz r11, TASK_STACK - THREAD(r10) 109 rlwinm r12,r12,0,4,2 /* Clear SO bit in CR */ 110 ALLOC_STACK_FRAME(r11, THREAD_SIZE - INT_FRAME_SIZE) 111 stw r12, _CCR(r11) /* save various registers */ 112 mflr r12 113 stw r12,_LINK(r11) 114 mfspr r12,SPRN_SRR0 115 stw r1, GPR1(r11) 116 mfspr r9,SPRN_SRR1 117 stw r1, 0(r11) 118 mr r1, r11 119 stw r12,_NIP(r11) 120 rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */ 121 lis r12, STACK_FRAME_REGS_MARKER@ha /* exception frame marker */ 122 stw r2,GPR2(r11) 123 addi r12, r12, STACK_FRAME_REGS_MARKER@l 124 stw r9,_MSR(r11) 125 li r2, \trapno + 1 126 stw r12, 8(r11) 127 stw r2,_TRAP(r11) 128 SAVE_GPR(0, r11) 129 SAVE_4GPRS(3, r11) 130 SAVE_2GPRS(7, r11) 131 132 addi r11,r1,STACK_FRAME_OVERHEAD 133 addi r2,r10,-THREAD 134 stw r11,PT_REGS(r10) 135 /* Check to see if the dbcr0 register is set up to debug. Use the 136 internal debug mode bit to do this. */ 137 lwz r12,THREAD_DBCR0(r10) 138 andis. r12,r12,DBCR0_IDM@h 139 ACCOUNT_CPU_USER_ENTRY(r2, r11, r12) 140 beq+ 3f 141 /* From user and task is ptraced - load up global dbcr0 */ 142 li r12,-1 /* clear all pending debug events */ 143 mtspr SPRN_DBSR,r12 144 lis r11,global_dbcr0@ha 145 tophys(r11,r11) 146 addi r11,r11,global_dbcr0@l 147 #ifdef CONFIG_SMP 148 lwz r10, TASK_CPU(r2) 149 slwi r10, r10, 3 150 add r11, r11, r10 151 #endif 152 lwz r12,0(r11) 153 mtspr SPRN_DBCR0,r12 154 lwz r12,4(r11) 155 addi r12,r12,-1 156 stw r12,4(r11) 157 158 3: 159 tovirt(r2, r2) /* set r2 to current */ 160 lis r11, transfer_to_syscall@h 161 ori r11, r11, transfer_to_syscall@l 162 #ifdef CONFIG_TRACE_IRQFLAGS 163 /* 164 * If MSR is changing we need to keep interrupts disabled at this point 165 * otherwise we might risk taking an interrupt before we tell lockdep 166 * they are enabled. 167 */ 168 lis r10, MSR_KERNEL@h 169 ori r10, r10, MSR_KERNEL@l 170 rlwimi r10, r9, 0, MSR_EE 171 #else 172 lis r10, (MSR_KERNEL | MSR_EE)@h 173 ori r10, r10, (MSR_KERNEL | MSR_EE)@l 174 #endif 175 mtspr SPRN_SRR1,r10 176 mtspr SPRN_SRR0,r11 177 SYNC 178 RFI /* jump to handler, enable MMU */ 179 .endm 180 181 /* To handle the additional exception priority levels on 40x and Book-E 182 * processors we allocate a stack per additional priority level. 183 * 184 * On 40x critical is the only additional level 185 * On 44x/e500 we have critical and machine check 186 * On e200 we have critical and debug (machine check occurs via critical) 187 * 188 * Additionally we reserve a SPRG for each priority level so we can free up a 189 * GPR to use as the base for indirect access to the exception stacks. This 190 * is necessary since the MMU is always on, for Book-E parts, and the stacks 191 * are offset from KERNELBASE. 192 * 193 * There is some space optimization to be had here if desired. However 194 * to allow for a common kernel with support for debug exceptions either 195 * going to critical or their own debug level we aren't currently 196 * providing configurations that micro-optimize space usage. 197 */ 198 199 #define MC_STACK_BASE mcheckirq_ctx 200 #define CRIT_STACK_BASE critirq_ctx 201 202 /* only on e500mc/e200 */ 203 #define DBG_STACK_BASE dbgirq_ctx 204 205 #define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE) 206 207 #ifdef CONFIG_SMP 208 #define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ 209 mfspr r8,SPRN_PIR; \ 210 slwi r8,r8,2; \ 211 addis r8,r8,level##_STACK_BASE@ha; \ 212 lwz r8,level##_STACK_BASE@l(r8); \ 213 addi r8,r8,EXC_LVL_FRAME_OVERHEAD; 214 #else 215 #define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ 216 lis r8,level##_STACK_BASE@ha; \ 217 lwz r8,level##_STACK_BASE@l(r8); \ 218 addi r8,r8,EXC_LVL_FRAME_OVERHEAD; 219 #endif 220 221 /* 222 * Exception prolog for critical/machine check exceptions. This is a 223 * little different from the normal exception prolog above since a 224 * critical/machine check exception can potentially occur at any point 225 * during normal exception processing. Thus we cannot use the same SPRG 226 * registers as the normal prolog above. Instead we use a portion of the 227 * critical/machine check exception stack at low physical addresses. 228 */ 229 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, intno, exc_level_srr0, exc_level_srr1) \ 230 mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \ 231 BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ 232 stw r9,GPR9(r8); /* save various registers */\ 233 mfcr r9; /* save CR in r9 for now */\ 234 stw r10,GPR10(r8); \ 235 stw r11,GPR11(r8); \ 236 stw r9,_CCR(r8); /* save CR on stack */\ 237 mfspr r11,exc_level_srr1; /* check whether user or kernel */\ 238 DO_KVM BOOKE_INTERRUPT_##intno exc_level_srr1; \ 239 BOOKE_CLEAR_BTB(r10) \ 240 andi. r11,r11,MSR_PR; \ 241 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ 242 lwz r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\ 243 addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\ 244 beq 1f; \ 245 /* COMING FROM USER MODE */ \ 246 stw r9,_CCR(r11); /* save CR */\ 247 lwz r10,GPR10(r8); /* copy regs from exception stack */\ 248 lwz r9,GPR9(r8); \ 249 stw r10,GPR10(r11); \ 250 lwz r10,GPR11(r8); \ 251 stw r9,GPR9(r11); \ 252 stw r10,GPR11(r11); \ 253 b 2f; \ 254 /* COMING FROM PRIV MODE */ \ 255 1: mr r11, r8; \ 256 2: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \ 257 stw r12,GPR12(r11); /* save various registers */\ 258 mflr r10; \ 259 stw r10,_LINK(r11); \ 260 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ 261 stw r12,_DEAR(r11); /* since they may have had stuff */\ 262 mfspr r9,SPRN_ESR; /* in them at the point where the */\ 263 stw r9,_ESR(r11); /* exception was taken */\ 264 mfspr r12,exc_level_srr0; \ 265 stw r1,GPR1(r11); \ 266 mfspr r9,exc_level_srr1; \ 267 stw r1,0(r11); \ 268 mr r1,r11; \ 269 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ 270 stw r0,GPR0(r11); \ 271 SAVE_4GPRS(3, r11); \ 272 SAVE_2GPRS(7, r11) 273 274 #define CRITICAL_EXCEPTION_PROLOG(intno) \ 275 EXC_LEVEL_EXCEPTION_PROLOG(CRIT, intno, SPRN_CSRR0, SPRN_CSRR1) 276 #define DEBUG_EXCEPTION_PROLOG \ 277 EXC_LEVEL_EXCEPTION_PROLOG(DBG, DEBUG, SPRN_DSRR0, SPRN_DSRR1) 278 #define MCHECK_EXCEPTION_PROLOG \ 279 EXC_LEVEL_EXCEPTION_PROLOG(MC, MACHINE_CHECK, \ 280 SPRN_MCSRR0, SPRN_MCSRR1) 281 282 /* 283 * Guest Doorbell -- this is a bit odd in that uses GSRR0/1 despite 284 * being delivered to the host. This exception can only happen 285 * inside a KVM guest -- so we just handle up to the DO_KVM rather 286 * than try to fit this into one of the existing prolog macros. 287 */ 288 #define GUEST_DOORBELL_EXCEPTION \ 289 START_EXCEPTION(GuestDoorbell); \ 290 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \ 291 mfspr r10, SPRN_SPRG_THREAD; \ 292 stw r11, THREAD_NORMSAVE(0)(r10); \ 293 mfspr r11, SPRN_SRR1; \ 294 stw r13, THREAD_NORMSAVE(2)(r10); \ 295 mfcr r13; /* save CR in r13 for now */\ 296 DO_KVM BOOKE_INTERRUPT_GUEST_DBELL SPRN_GSRR1; \ 297 trap 298 299 /* 300 * Exception vectors. 301 */ 302 #define START_EXCEPTION(label) \ 303 .align 5; \ 304 label: 305 306 #define EXCEPTION(n, intno, label, hdlr, xfer) \ 307 START_EXCEPTION(label); \ 308 NORMAL_EXCEPTION_PROLOG(intno); \ 309 addi r3,r1,STACK_FRAME_OVERHEAD; \ 310 xfer(n, hdlr) 311 312 #define CRITICAL_EXCEPTION(n, intno, label, hdlr) \ 313 START_EXCEPTION(label); \ 314 CRITICAL_EXCEPTION_PROLOG(intno); \ 315 addi r3,r1,STACK_FRAME_OVERHEAD; \ 316 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ 317 crit_transfer_to_handler, ret_from_crit_exc) 318 319 #define MCHECK_EXCEPTION(n, label, hdlr) \ 320 START_EXCEPTION(label); \ 321 MCHECK_EXCEPTION_PROLOG; \ 322 mfspr r5,SPRN_ESR; \ 323 stw r5,_ESR(r11); \ 324 addi r3,r1,STACK_FRAME_OVERHEAD; \ 325 EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ 326 mcheck_transfer_to_handler, ret_from_mcheck_exc) 327 328 #define EXC_XFER_TEMPLATE(hdlr, trap, msr, tfer, ret) \ 329 li r10,trap; \ 330 stw r10,_TRAP(r11); \ 331 lis r10,msr@h; \ 332 ori r10,r10,msr@l; \ 333 bl tfer; \ 334 .long hdlr; \ 335 .long ret 336 337 #define EXC_XFER_STD(n, hdlr) \ 338 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, transfer_to_handler_full, \ 339 ret_from_except_full) 340 341 #define EXC_XFER_LITE(n, hdlr) \ 342 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \ 343 ret_from_except) 344 345 /* Check for a single step debug exception while in an exception 346 * handler before state has been saved. This is to catch the case 347 * where an instruction that we are trying to single step causes 348 * an exception (eg ITLB/DTLB miss) and thus the first instruction of 349 * the exception handler generates a single step debug exception. 350 * 351 * If we get a debug trap on the first instruction of an exception handler, 352 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is 353 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR). 354 * The exception handler was handling a non-critical interrupt, so it will 355 * save (and later restore) the MSR via SPRN_CSRR1, which will still have 356 * the MSR_DE bit set. 357 */ 358 #define DEBUG_DEBUG_EXCEPTION \ 359 START_EXCEPTION(DebugDebug); \ 360 DEBUG_EXCEPTION_PROLOG; \ 361 \ 362 /* \ 363 * If there is a single step or branch-taken exception in an \ 364 * exception entry sequence, it was probably meant to apply to \ 365 * the code where the exception occurred (since exception entry \ 366 * doesn't turn off DE automatically). We simulate the effect \ 367 * of turning off DE on entry to an exception handler by turning \ 368 * off DE in the DSRR1 value and clearing the debug status. \ 369 */ \ 370 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ 371 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \ 372 beq+ 2f; \ 373 \ 374 lis r10,interrupt_base@h; /* check if exception in vectors */ \ 375 ori r10,r10,interrupt_base@l; \ 376 cmplw r12,r10; \ 377 blt+ 2f; /* addr below exception vectors */ \ 378 \ 379 lis r10,interrupt_end@h; \ 380 ori r10,r10,interrupt_end@l; \ 381 cmplw r12,r10; \ 382 bgt+ 2f; /* addr above exception vectors */ \ 383 \ 384 /* here it looks like we got an inappropriate debug exception. */ \ 385 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \ 386 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \ 387 mtspr SPRN_DBSR,r10; \ 388 /* restore state and get out */ \ 389 lwz r10,_CCR(r11); \ 390 lwz r0,GPR0(r11); \ 391 lwz r1,GPR1(r11); \ 392 mtcrf 0x80,r10; \ 393 mtspr SPRN_DSRR0,r12; \ 394 mtspr SPRN_DSRR1,r9; \ 395 lwz r9,GPR9(r11); \ 396 lwz r12,GPR12(r11); \ 397 mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \ 398 BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \ 399 lwz r10,GPR10(r8); \ 400 lwz r11,GPR11(r8); \ 401 mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \ 402 \ 403 PPC_RFDI; \ 404 b .; \ 405 \ 406 /* continue normal handling for a debug exception... */ \ 407 2: mfspr r4,SPRN_DBSR; \ 408 addi r3,r1,STACK_FRAME_OVERHEAD; \ 409 EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), debug_transfer_to_handler, ret_from_debug_exc) 410 411 #define DEBUG_CRIT_EXCEPTION \ 412 START_EXCEPTION(DebugCrit); \ 413 CRITICAL_EXCEPTION_PROLOG(DEBUG); \ 414 \ 415 /* \ 416 * If there is a single step or branch-taken exception in an \ 417 * exception entry sequence, it was probably meant to apply to \ 418 * the code where the exception occurred (since exception entry \ 419 * doesn't turn off DE automatically). We simulate the effect \ 420 * of turning off DE on entry to an exception handler by turning \ 421 * off DE in the CSRR1 value and clearing the debug status. \ 422 */ \ 423 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ 424 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \ 425 beq+ 2f; \ 426 \ 427 lis r10,interrupt_base@h; /* check if exception in vectors */ \ 428 ori r10,r10,interrupt_base@l; \ 429 cmplw r12,r10; \ 430 blt+ 2f; /* addr below exception vectors */ \ 431 \ 432 lis r10,interrupt_end@h; \ 433 ori r10,r10,interrupt_end@l; \ 434 cmplw r12,r10; \ 435 bgt+ 2f; /* addr above exception vectors */ \ 436 \ 437 /* here it looks like we got an inappropriate debug exception. */ \ 438 1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \ 439 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \ 440 mtspr SPRN_DBSR,r10; \ 441 /* restore state and get out */ \ 442 lwz r10,_CCR(r11); \ 443 lwz r0,GPR0(r11); \ 444 lwz r1,GPR1(r11); \ 445 mtcrf 0x80,r10; \ 446 mtspr SPRN_CSRR0,r12; \ 447 mtspr SPRN_CSRR1,r9; \ 448 lwz r9,GPR9(r11); \ 449 lwz r12,GPR12(r11); \ 450 mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \ 451 BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ 452 lwz r10,GPR10(r8); \ 453 lwz r11,GPR11(r8); \ 454 mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \ 455 \ 456 rfci; \ 457 b .; \ 458 \ 459 /* continue normal handling for a critical exception... */ \ 460 2: mfspr r4,SPRN_DBSR; \ 461 addi r3,r1,STACK_FRAME_OVERHEAD; \ 462 EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), crit_transfer_to_handler, ret_from_crit_exc) 463 464 #define DATA_STORAGE_EXCEPTION \ 465 START_EXCEPTION(DataStorage) \ 466 NORMAL_EXCEPTION_PROLOG(DATA_STORAGE); \ 467 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \ 468 stw r5,_ESR(r11); \ 469 mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \ 470 stw r4, _DEAR(r11); \ 471 EXC_XFER_LITE(0x0300, handle_page_fault) 472 473 #define INSTRUCTION_STORAGE_EXCEPTION \ 474 START_EXCEPTION(InstructionStorage) \ 475 NORMAL_EXCEPTION_PROLOG(INST_STORAGE); \ 476 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \ 477 stw r5,_ESR(r11); \ 478 mr r4,r12; /* Pass SRR0 as arg2 */ \ 479 stw r4, _DEAR(r11); \ 480 li r5,0; /* Pass zero as arg3 */ \ 481 EXC_XFER_LITE(0x0400, handle_page_fault) 482 483 #define ALIGNMENT_EXCEPTION \ 484 START_EXCEPTION(Alignment) \ 485 NORMAL_EXCEPTION_PROLOG(ALIGNMENT); \ 486 mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \ 487 stw r4,_DEAR(r11); \ 488 addi r3,r1,STACK_FRAME_OVERHEAD; \ 489 EXC_XFER_STD(0x0600, alignment_exception) 490 491 #define PROGRAM_EXCEPTION \ 492 START_EXCEPTION(Program) \ 493 NORMAL_EXCEPTION_PROLOG(PROGRAM); \ 494 mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \ 495 stw r4,_ESR(r11); \ 496 addi r3,r1,STACK_FRAME_OVERHEAD; \ 497 EXC_XFER_STD(0x0700, program_check_exception) 498 499 #define DECREMENTER_EXCEPTION \ 500 START_EXCEPTION(Decrementer) \ 501 NORMAL_EXCEPTION_PROLOG(DECREMENTER); \ 502 lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \ 503 mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \ 504 addi r3,r1,STACK_FRAME_OVERHEAD; \ 505 EXC_XFER_LITE(0x0900, timer_interrupt) 506 507 #define FP_UNAVAILABLE_EXCEPTION \ 508 START_EXCEPTION(FloatingPointUnavailable) \ 509 NORMAL_EXCEPTION_PROLOG(FP_UNAVAIL); \ 510 beq 1f; \ 511 bl load_up_fpu; /* if from user, just load it up */ \ 512 b fast_exception_return; \ 513 1: addi r3,r1,STACK_FRAME_OVERHEAD; \ 514 EXC_XFER_STD(0x800, kernel_fp_unavailable_exception) 515 516 #else /* __ASSEMBLY__ */ 517 struct exception_regs { 518 unsigned long mas0; 519 unsigned long mas1; 520 unsigned long mas2; 521 unsigned long mas3; 522 unsigned long mas6; 523 unsigned long mas7; 524 unsigned long srr0; 525 unsigned long srr1; 526 unsigned long csrr0; 527 unsigned long csrr1; 528 unsigned long dsrr0; 529 unsigned long dsrr1; 530 unsigned long saved_ksp_limit; 531 }; 532 533 /* ensure this structure is always sized to a multiple of the stack alignment */ 534 #define STACK_EXC_LVL_FRAME_SIZE _ALIGN_UP(sizeof (struct exception_regs), 16) 535 536 #endif /* __ASSEMBLY__ */ 537 #endif /* __HEAD_BOOKE_H__ */ 538