1/* 2 * Kernel execution entry point code. 3 * 4 * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org> 5 * Initial PowerPC version. 6 * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu> 7 * Rewritten for PReP 8 * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au> 9 * Low-level exception handers, MMU support, and rewrite. 10 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> 11 * PowerPC 8xx modifications. 12 * Copyright (c) 1998-1999 TiVo, Inc. 13 * PowerPC 403GCX modifications. 14 * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> 15 * PowerPC 403GCX/405GP modifications. 16 * Copyright 2000 MontaVista Software Inc. 17 * PPC405 modifications 18 * PowerPC 403GCX/405GP modifications. 19 * Author: MontaVista Software, Inc. 20 * frank_rowand@mvista.com or source@mvista.com 21 * debbie_chu@mvista.com 22 * Copyright 2002-2005 MontaVista Software, Inc. 23 * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org> 24 * 25 * This program is free software; you can redistribute it and/or modify it 26 * under the terms of the GNU General Public License as published by the 27 * Free Software Foundation; either version 2 of the License, or (at your 28 * option) any later version. 29 */ 30 31#include <linux/init.h> 32#include <asm/processor.h> 33#include <asm/page.h> 34#include <asm/mmu.h> 35#include <asm/pgtable.h> 36#include <asm/cputable.h> 37#include <asm/thread_info.h> 38#include <asm/ppc_asm.h> 39#include <asm/asm-offsets.h> 40#include <asm/ptrace.h> 41#include <asm/synch.h> 42#include "head_booke.h" 43 44 45/* As with the other PowerPC ports, it is expected that when code 46 * execution begins here, the following registers contain valid, yet 47 * optional, information: 48 * 49 * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.) 50 * r4 - Starting address of the init RAM disk 51 * r5 - Ending address of the init RAM disk 52 * r6 - Start of kernel command line string (e.g. "mem=128") 53 * r7 - End of kernel command line string 54 * 55 */ 56 __HEAD 57_ENTRY(_stext); 58_ENTRY(_start); 59 /* 60 * Reserve a word at a fixed location to store the address 61 * of abatron_pteptrs 62 */ 63 nop 64 mr r31,r3 /* save device tree ptr */ 65 li r24,0 /* CPU number */ 66 67#ifdef CONFIG_RELOCATABLE 68/* 69 * Relocate ourselves to the current runtime address. 70 * This is called only by the Boot CPU. 71 * "relocate" is called with our current runtime virutal 72 * address. 73 * r21 will be loaded with the physical runtime address of _stext 74 */ 75 bl 0f /* Get our runtime address */ 760: mflr r21 /* Make it accessible */ 77 addis r21,r21,(_stext - 0b)@ha 78 addi r21,r21,(_stext - 0b)@l /* Get our current runtime base */ 79 80 /* 81 * We have the runtime (virutal) address of our base. 82 * We calculate our shift of offset from a 256M page. 83 * We could map the 256M page we belong to at PAGE_OFFSET and 84 * get going from there. 85 */ 86 lis r4,KERNELBASE@h 87 ori r4,r4,KERNELBASE@l 88 rlwinm r6,r21,0,4,31 /* r6 = PHYS_START % 256M */ 89 rlwinm r5,r4,0,4,31 /* r5 = KERNELBASE % 256M */ 90 subf r3,r5,r6 /* r3 = r6 - r5 */ 91 add r3,r4,r3 /* Required Virutal Address */ 92 93 bl relocate 94#endif 95 96 bl init_cpu_state 97 98 /* 99 * This is where the main kernel code starts. 100 */ 101 102 /* ptr to current */ 103 lis r2,init_task@h 104 ori r2,r2,init_task@l 105 106 /* ptr to current thread */ 107 addi r4,r2,THREAD /* init task's THREAD */ 108 mtspr SPRN_SPRG_THREAD,r4 109 110 /* stack */ 111 lis r1,init_thread_union@h 112 ori r1,r1,init_thread_union@l 113 li r0,0 114 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) 115 116 bl early_init 117 118#ifdef CONFIG_RELOCATABLE 119 /* 120 * Relocatable kernel support based on processing of dynamic 121 * relocation entries. 122 * 123 * r25 will contain RPN/ERPN for the start address of memory 124 * r21 will contain the current offset of _stext 125 */ 126 lis r3,kernstart_addr@ha 127 la r3,kernstart_addr@l(r3) 128 129 /* 130 * Compute the kernstart_addr. 131 * kernstart_addr => (r6,r8) 132 * kernstart_addr & ~0xfffffff => (r6,r7) 133 */ 134 rlwinm r6,r25,0,28,31 /* ERPN. Bits 32-35 of Address */ 135 rlwinm r7,r25,0,0,3 /* RPN - assuming 256 MB page size */ 136 rlwinm r8,r21,0,4,31 /* r8 = (_stext & 0xfffffff) */ 137 or r8,r7,r8 /* Compute the lower 32bit of kernstart_addr */ 138 139 /* Store kernstart_addr */ 140 stw r6,0(r3) /* higher 32bit */ 141 stw r8,4(r3) /* lower 32bit */ 142 143 /* 144 * Compute the virt_phys_offset : 145 * virt_phys_offset = stext.run - kernstart_addr 146 * 147 * stext.run = (KERNELBASE & ~0xfffffff) + (kernstart_addr & 0xfffffff) 148 * When we relocate, we have : 149 * 150 * (kernstart_addr & 0xfffffff) = (stext.run & 0xfffffff) 151 * 152 * hence: 153 * virt_phys_offset = (KERNELBASE & ~0xfffffff) - (kernstart_addr & ~0xfffffff) 154 * 155 */ 156 157 /* KERNELBASE&~0xfffffff => (r4,r5) */ 158 li r4, 0 /* higer 32bit */ 159 lis r5,KERNELBASE@h 160 rlwinm r5,r5,0,0,3 /* Align to 256M, lower 32bit */ 161 162 /* 163 * 64bit subtraction. 164 */ 165 subfc r5,r7,r5 166 subfe r4,r6,r4 167 168 /* Store virt_phys_offset */ 169 lis r3,virt_phys_offset@ha 170 la r3,virt_phys_offset@l(r3) 171 172 stw r4,0(r3) 173 stw r5,4(r3) 174 175#elif defined(CONFIG_DYNAMIC_MEMSTART) 176 /* 177 * Mapping based, page aligned dynamic kernel loading. 178 * 179 * r25 will contain RPN/ERPN for the start address of memory 180 * 181 * Add the difference between KERNELBASE and PAGE_OFFSET to the 182 * start of physical memory to get kernstart_addr. 183 */ 184 lis r3,kernstart_addr@ha 185 la r3,kernstart_addr@l(r3) 186 187 lis r4,KERNELBASE@h 188 ori r4,r4,KERNELBASE@l 189 lis r5,PAGE_OFFSET@h 190 ori r5,r5,PAGE_OFFSET@l 191 subf r4,r5,r4 192 193 rlwinm r6,r25,0,28,31 /* ERPN */ 194 rlwinm r7,r25,0,0,3 /* RPN - assuming 256 MB page size */ 195 add r7,r7,r4 196 197 stw r6,0(r3) 198 stw r7,4(r3) 199#endif 200 201/* 202 * Decide what sort of machine this is and initialize the MMU. 203 */ 204 li r3,0 205 mr r4,r31 206 bl machine_init 207 bl MMU_init 208 209 /* Setup PTE pointers for the Abatron bdiGDB */ 210 lis r6, swapper_pg_dir@h 211 ori r6, r6, swapper_pg_dir@l 212 lis r5, abatron_pteptrs@h 213 ori r5, r5, abatron_pteptrs@l 214 lis r4, KERNELBASE@h 215 ori r4, r4, KERNELBASE@l 216 stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */ 217 stw r6, 0(r5) 218 219 /* Clear the Machine Check Syndrome Register */ 220 li r0,0 221 mtspr SPRN_MCSR,r0 222 223 /* Let's move on */ 224 lis r4,start_kernel@h 225 ori r4,r4,start_kernel@l 226 lis r3,MSR_KERNEL@h 227 ori r3,r3,MSR_KERNEL@l 228 mtspr SPRN_SRR0,r4 229 mtspr SPRN_SRR1,r3 230 rfi /* change context and jump to start_kernel */ 231 232/* 233 * Interrupt vector entry code 234 * 235 * The Book E MMUs are always on so we don't need to handle 236 * interrupts in real mode as with previous PPC processors. In 237 * this case we handle interrupts in the kernel virtual address 238 * space. 239 * 240 * Interrupt vectors are dynamically placed relative to the 241 * interrupt prefix as determined by the address of interrupt_base. 242 * The interrupt vectors offsets are programmed using the labels 243 * for each interrupt vector entry. 244 * 245 * Interrupt vectors must be aligned on a 16 byte boundary. 246 * We align on a 32 byte cache line boundary for good measure. 247 */ 248 249interrupt_base: 250 /* Critical Input Interrupt */ 251 CRITICAL_EXCEPTION(0x0100, CRITICAL, CriticalInput, unknown_exception) 252 253 /* Machine Check Interrupt */ 254 CRITICAL_EXCEPTION(0x0200, MACHINE_CHECK, MachineCheck, \ 255 machine_check_exception) 256 MCHECK_EXCEPTION(0x0210, MachineCheckA, machine_check_exception) 257 258 /* Data Storage Interrupt */ 259 DATA_STORAGE_EXCEPTION 260 261 /* Instruction Storage Interrupt */ 262 INSTRUCTION_STORAGE_EXCEPTION 263 264 /* External Input Interrupt */ 265 EXCEPTION(0x0500, BOOKE_INTERRUPT_EXTERNAL, ExternalInput, \ 266 do_IRQ, EXC_XFER_LITE) 267 268 /* Alignment Interrupt */ 269 ALIGNMENT_EXCEPTION 270 271 /* Program Interrupt */ 272 PROGRAM_EXCEPTION 273 274 /* Floating Point Unavailable Interrupt */ 275#ifdef CONFIG_PPC_FPU 276 FP_UNAVAILABLE_EXCEPTION 277#else 278 EXCEPTION(0x2010, BOOKE_INTERRUPT_FP_UNAVAIL, \ 279 FloatingPointUnavailable, unknown_exception, EXC_XFER_EE) 280#endif 281 /* System Call Interrupt */ 282 START_EXCEPTION(SystemCall) 283 NORMAL_EXCEPTION_PROLOG(BOOKE_INTERRUPT_SYSCALL) 284 EXC_XFER_EE_LITE(0x0c00, DoSyscall) 285 286 /* Auxiliary Processor Unavailable Interrupt */ 287 EXCEPTION(0x2020, BOOKE_INTERRUPT_AP_UNAVAIL, \ 288 AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE) 289 290 /* Decrementer Interrupt */ 291 DECREMENTER_EXCEPTION 292 293 /* Fixed Internal Timer Interrupt */ 294 /* TODO: Add FIT support */ 295 EXCEPTION(0x1010, BOOKE_INTERRUPT_FIT, FixedIntervalTimer, \ 296 unknown_exception, EXC_XFER_EE) 297 298 /* Watchdog Timer Interrupt */ 299 /* TODO: Add watchdog support */ 300#ifdef CONFIG_BOOKE_WDT 301 CRITICAL_EXCEPTION(0x1020, WATCHDOG, WatchdogTimer, WatchdogException) 302#else 303 CRITICAL_EXCEPTION(0x1020, WATCHDOG, WatchdogTimer, unknown_exception) 304#endif 305 306 /* Data TLB Error Interrupt */ 307 START_EXCEPTION(DataTLBError44x) 308 mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ 309 mtspr SPRN_SPRG_WSCRATCH1, r11 310 mtspr SPRN_SPRG_WSCRATCH2, r12 311 mtspr SPRN_SPRG_WSCRATCH3, r13 312 mfcr r11 313 mtspr SPRN_SPRG_WSCRATCH4, r11 314 mfspr r10, SPRN_DEAR /* Get faulting address */ 315 316 /* If we are faulting a kernel address, we have to use the 317 * kernel page tables. 318 */ 319 lis r11, PAGE_OFFSET@h 320 cmplw r10, r11 321 blt+ 3f 322 lis r11, swapper_pg_dir@h 323 ori r11, r11, swapper_pg_dir@l 324 325 mfspr r12,SPRN_MMUCR 326 rlwinm r12,r12,0,0,23 /* Clear TID */ 327 328 b 4f 329 330 /* Get the PGD for the current thread */ 3313: 332 mfspr r11,SPRN_SPRG_THREAD 333 lwz r11,PGDIR(r11) 334 335 /* Load PID into MMUCR TID */ 336 mfspr r12,SPRN_MMUCR 337 mfspr r13,SPRN_PID /* Get PID */ 338 rlwimi r12,r13,0,24,31 /* Set TID */ 339 3404: 341 mtspr SPRN_MMUCR,r12 342 343 /* Mask of required permission bits. Note that while we 344 * do copy ESR:ST to _PAGE_RW position as trying to write 345 * to an RO page is pretty common, we don't do it with 346 * _PAGE_DIRTY. We could do it, but it's a fairly rare 347 * event so I'd rather take the overhead when it happens 348 * rather than adding an instruction here. We should measure 349 * whether the whole thing is worth it in the first place 350 * as we could avoid loading SPRN_ESR completely in the first 351 * place... 352 * 353 * TODO: Is it worth doing that mfspr & rlwimi in the first 354 * place or can we save a couple of instructions here ? 355 */ 356 mfspr r12,SPRN_ESR 357 li r13,_PAGE_PRESENT|_PAGE_ACCESSED 358 rlwimi r13,r12,10,30,30 359 360 /* Load the PTE */ 361 /* Compute pgdir/pmd offset */ 362 rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29 363 lwzx r11, r12, r11 /* Get pgd/pmd entry */ 364 rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */ 365 beq 2f /* Bail if no table */ 366 367 /* Compute pte address */ 368 rlwimi r12, r10, PPC44x_PTE_ADD_SHIFT, PPC44x_PTE_ADD_MASK_BIT, 28 369 lwz r11, 0(r12) /* Get high word of pte entry */ 370 lwz r12, 4(r12) /* Get low word of pte entry */ 371 372 lis r10,tlb_44x_index@ha 373 374 andc. r13,r13,r12 /* Check permission */ 375 376 /* Load the next available TLB index */ 377 lwz r13,tlb_44x_index@l(r10) 378 379 bne 2f /* Bail if permission mismach */ 380 381 /* Increment, rollover, and store TLB index */ 382 addi r13,r13,1 383 384 /* Compare with watermark (instruction gets patched) */ 385 .globl tlb_44x_patch_hwater_D 386tlb_44x_patch_hwater_D: 387 cmpwi 0,r13,1 /* reserve entries */ 388 ble 5f 389 li r13,0 3905: 391 /* Store the next available TLB index */ 392 stw r13,tlb_44x_index@l(r10) 393 394 /* Re-load the faulting address */ 395 mfspr r10,SPRN_DEAR 396 397 /* Jump to common tlb load */ 398 b finish_tlb_load_44x 399 4002: 401 /* The bailout. Restore registers to pre-exception conditions 402 * and call the heavyweights to help us out. 403 */ 404 mfspr r11, SPRN_SPRG_RSCRATCH4 405 mtcr r11 406 mfspr r13, SPRN_SPRG_RSCRATCH3 407 mfspr r12, SPRN_SPRG_RSCRATCH2 408 mfspr r11, SPRN_SPRG_RSCRATCH1 409 mfspr r10, SPRN_SPRG_RSCRATCH0 410 b DataStorage 411 412 /* Instruction TLB Error Interrupt */ 413 /* 414 * Nearly the same as above, except we get our 415 * information from different registers and bailout 416 * to a different point. 417 */ 418 START_EXCEPTION(InstructionTLBError44x) 419 mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ 420 mtspr SPRN_SPRG_WSCRATCH1, r11 421 mtspr SPRN_SPRG_WSCRATCH2, r12 422 mtspr SPRN_SPRG_WSCRATCH3, r13 423 mfcr r11 424 mtspr SPRN_SPRG_WSCRATCH4, r11 425 mfspr r10, SPRN_SRR0 /* Get faulting address */ 426 427 /* If we are faulting a kernel address, we have to use the 428 * kernel page tables. 429 */ 430 lis r11, PAGE_OFFSET@h 431 cmplw r10, r11 432 blt+ 3f 433 lis r11, swapper_pg_dir@h 434 ori r11, r11, swapper_pg_dir@l 435 436 mfspr r12,SPRN_MMUCR 437 rlwinm r12,r12,0,0,23 /* Clear TID */ 438 439 b 4f 440 441 /* Get the PGD for the current thread */ 4423: 443 mfspr r11,SPRN_SPRG_THREAD 444 lwz r11,PGDIR(r11) 445 446 /* Load PID into MMUCR TID */ 447 mfspr r12,SPRN_MMUCR 448 mfspr r13,SPRN_PID /* Get PID */ 449 rlwimi r12,r13,0,24,31 /* Set TID */ 450 4514: 452 mtspr SPRN_MMUCR,r12 453 454 /* Make up the required permissions */ 455 li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC 456 457 /* Compute pgdir/pmd offset */ 458 rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29 459 lwzx r11, r12, r11 /* Get pgd/pmd entry */ 460 rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */ 461 beq 2f /* Bail if no table */ 462 463 /* Compute pte address */ 464 rlwimi r12, r10, PPC44x_PTE_ADD_SHIFT, PPC44x_PTE_ADD_MASK_BIT, 28 465 lwz r11, 0(r12) /* Get high word of pte entry */ 466 lwz r12, 4(r12) /* Get low word of pte entry */ 467 468 lis r10,tlb_44x_index@ha 469 470 andc. r13,r13,r12 /* Check permission */ 471 472 /* Load the next available TLB index */ 473 lwz r13,tlb_44x_index@l(r10) 474 475 bne 2f /* Bail if permission mismach */ 476 477 /* Increment, rollover, and store TLB index */ 478 addi r13,r13,1 479 480 /* Compare with watermark (instruction gets patched) */ 481 .globl tlb_44x_patch_hwater_I 482tlb_44x_patch_hwater_I: 483 cmpwi 0,r13,1 /* reserve entries */ 484 ble 5f 485 li r13,0 4865: 487 /* Store the next available TLB index */ 488 stw r13,tlb_44x_index@l(r10) 489 490 /* Re-load the faulting address */ 491 mfspr r10,SPRN_SRR0 492 493 /* Jump to common TLB load point */ 494 b finish_tlb_load_44x 495 4962: 497 /* The bailout. Restore registers to pre-exception conditions 498 * and call the heavyweights to help us out. 499 */ 500 mfspr r11, SPRN_SPRG_RSCRATCH4 501 mtcr r11 502 mfspr r13, SPRN_SPRG_RSCRATCH3 503 mfspr r12, SPRN_SPRG_RSCRATCH2 504 mfspr r11, SPRN_SPRG_RSCRATCH1 505 mfspr r10, SPRN_SPRG_RSCRATCH0 506 b InstructionStorage 507 508/* 509 * Both the instruction and data TLB miss get to this 510 * point to load the TLB. 511 * r10 - EA of fault 512 * r11 - PTE high word value 513 * r12 - PTE low word value 514 * r13 - TLB index 515 * MMUCR - loaded with proper value when we get here 516 * Upon exit, we reload everything and RFI. 517 */ 518finish_tlb_load_44x: 519 /* Combine RPN & ERPN an write WS 0 */ 520 rlwimi r11,r12,0,0,31-PAGE_SHIFT 521 tlbwe r11,r13,PPC44x_TLB_XLAT 522 523 /* 524 * Create WS1. This is the faulting address (EPN), 525 * page size, and valid flag. 526 */ 527 li r11,PPC44x_TLB_VALID | PPC44x_TLBE_SIZE 528 /* Insert valid and page size */ 529 rlwimi r10,r11,0,PPC44x_PTE_ADD_MASK_BIT,31 530 tlbwe r10,r13,PPC44x_TLB_PAGEID /* Write PAGEID */ 531 532 /* And WS 2 */ 533 li r10,0xf85 /* Mask to apply from PTE */ 534 rlwimi r10,r12,29,30,30 /* DIRTY -> SW position */ 535 and r11,r12,r10 /* Mask PTE bits to keep */ 536 andi. r10,r12,_PAGE_USER /* User page ? */ 537 beq 1f /* nope, leave U bits empty */ 538 rlwimi r11,r11,3,26,28 /* yes, copy S bits to U */ 5391: tlbwe r11,r13,PPC44x_TLB_ATTRIB /* Write ATTRIB */ 540 541 /* Done...restore registers and get out of here. 542 */ 543 mfspr r11, SPRN_SPRG_RSCRATCH4 544 mtcr r11 545 mfspr r13, SPRN_SPRG_RSCRATCH3 546 mfspr r12, SPRN_SPRG_RSCRATCH2 547 mfspr r11, SPRN_SPRG_RSCRATCH1 548 mfspr r10, SPRN_SPRG_RSCRATCH0 549 rfi /* Force context change */ 550 551/* TLB error interrupts for 476 552 */ 553#ifdef CONFIG_PPC_47x 554 START_EXCEPTION(DataTLBError47x) 555 mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */ 556 mtspr SPRN_SPRG_WSCRATCH1,r11 557 mtspr SPRN_SPRG_WSCRATCH2,r12 558 mtspr SPRN_SPRG_WSCRATCH3,r13 559 mfcr r11 560 mtspr SPRN_SPRG_WSCRATCH4,r11 561 mfspr r10,SPRN_DEAR /* Get faulting address */ 562 563 /* If we are faulting a kernel address, we have to use the 564 * kernel page tables. 565 */ 566 lis r11,PAGE_OFFSET@h 567 cmplw cr0,r10,r11 568 blt+ 3f 569 lis r11,swapper_pg_dir@h 570 ori r11,r11, swapper_pg_dir@l 571 li r12,0 /* MMUCR = 0 */ 572 b 4f 573 574 /* Get the PGD for the current thread and setup MMUCR */ 5753: mfspr r11,SPRN_SPRG3 576 lwz r11,PGDIR(r11) 577 mfspr r12,SPRN_PID /* Get PID */ 5784: mtspr SPRN_MMUCR,r12 /* Set MMUCR */ 579 580 /* Mask of required permission bits. Note that while we 581 * do copy ESR:ST to _PAGE_RW position as trying to write 582 * to an RO page is pretty common, we don't do it with 583 * _PAGE_DIRTY. We could do it, but it's a fairly rare 584 * event so I'd rather take the overhead when it happens 585 * rather than adding an instruction here. We should measure 586 * whether the whole thing is worth it in the first place 587 * as we could avoid loading SPRN_ESR completely in the first 588 * place... 589 * 590 * TODO: Is it worth doing that mfspr & rlwimi in the first 591 * place or can we save a couple of instructions here ? 592 */ 593 mfspr r12,SPRN_ESR 594 li r13,_PAGE_PRESENT|_PAGE_ACCESSED 595 rlwimi r13,r12,10,30,30 596 597 /* Load the PTE */ 598 /* Compute pgdir/pmd offset */ 599 rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29 600 lwzx r11,r12,r11 /* Get pgd/pmd entry */ 601 602 /* Word 0 is EPN,V,TS,DSIZ */ 603 li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE 604 rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/ 605 li r12,0 606 tlbwe r10,r12,0 607 608 /* XXX can we do better ? Need to make sure tlbwe has established 609 * latch V bit in MMUCR0 before the PTE is loaded further down */ 610#ifdef CONFIG_SMP 611 isync 612#endif 613 614 rlwinm. r12,r11,0,0,20 /* Extract pt base address */ 615 /* Compute pte address */ 616 rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28 617 beq 2f /* Bail if no table */ 618 lwz r11,0(r12) /* Get high word of pte entry */ 619 620 /* XXX can we do better ? maybe insert a known 0 bit from r11 into the 621 * bottom of r12 to create a data dependency... We can also use r10 622 * as destination nowadays 623 */ 624#ifdef CONFIG_SMP 625 lwsync 626#endif 627 lwz r12,4(r12) /* Get low word of pte entry */ 628 629 andc. r13,r13,r12 /* Check permission */ 630 631 /* Jump to common tlb load */ 632 beq finish_tlb_load_47x 633 6342: /* The bailout. Restore registers to pre-exception conditions 635 * and call the heavyweights to help us out. 636 */ 637 mfspr r11,SPRN_SPRG_RSCRATCH4 638 mtcr r11 639 mfspr r13,SPRN_SPRG_RSCRATCH3 640 mfspr r12,SPRN_SPRG_RSCRATCH2 641 mfspr r11,SPRN_SPRG_RSCRATCH1 642 mfspr r10,SPRN_SPRG_RSCRATCH0 643 b DataStorage 644 645 /* Instruction TLB Error Interrupt */ 646 /* 647 * Nearly the same as above, except we get our 648 * information from different registers and bailout 649 * to a different point. 650 */ 651 START_EXCEPTION(InstructionTLBError47x) 652 mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */ 653 mtspr SPRN_SPRG_WSCRATCH1,r11 654 mtspr SPRN_SPRG_WSCRATCH2,r12 655 mtspr SPRN_SPRG_WSCRATCH3,r13 656 mfcr r11 657 mtspr SPRN_SPRG_WSCRATCH4,r11 658 mfspr r10,SPRN_SRR0 /* Get faulting address */ 659 660 /* If we are faulting a kernel address, we have to use the 661 * kernel page tables. 662 */ 663 lis r11,PAGE_OFFSET@h 664 cmplw cr0,r10,r11 665 blt+ 3f 666 lis r11,swapper_pg_dir@h 667 ori r11,r11, swapper_pg_dir@l 668 li r12,0 /* MMUCR = 0 */ 669 b 4f 670 671 /* Get the PGD for the current thread and setup MMUCR */ 6723: mfspr r11,SPRN_SPRG_THREAD 673 lwz r11,PGDIR(r11) 674 mfspr r12,SPRN_PID /* Get PID */ 6754: mtspr SPRN_MMUCR,r12 /* Set MMUCR */ 676 677 /* Make up the required permissions */ 678 li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC 679 680 /* Load PTE */ 681 /* Compute pgdir/pmd offset */ 682 rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29 683 lwzx r11,r12,r11 /* Get pgd/pmd entry */ 684 685 /* Word 0 is EPN,V,TS,DSIZ */ 686 li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE 687 rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/ 688 li r12,0 689 tlbwe r10,r12,0 690 691 /* XXX can we do better ? Need to make sure tlbwe has established 692 * latch V bit in MMUCR0 before the PTE is loaded further down */ 693#ifdef CONFIG_SMP 694 isync 695#endif 696 697 rlwinm. r12,r11,0,0,20 /* Extract pt base address */ 698 /* Compute pte address */ 699 rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28 700 beq 2f /* Bail if no table */ 701 702 lwz r11,0(r12) /* Get high word of pte entry */ 703 /* XXX can we do better ? maybe insert a known 0 bit from r11 into the 704 * bottom of r12 to create a data dependency... We can also use r10 705 * as destination nowadays 706 */ 707#ifdef CONFIG_SMP 708 lwsync 709#endif 710 lwz r12,4(r12) /* Get low word of pte entry */ 711 712 andc. r13,r13,r12 /* Check permission */ 713 714 /* Jump to common TLB load point */ 715 beq finish_tlb_load_47x 716 7172: /* The bailout. Restore registers to pre-exception conditions 718 * and call the heavyweights to help us out. 719 */ 720 mfspr r11, SPRN_SPRG_RSCRATCH4 721 mtcr r11 722 mfspr r13, SPRN_SPRG_RSCRATCH3 723 mfspr r12, SPRN_SPRG_RSCRATCH2 724 mfspr r11, SPRN_SPRG_RSCRATCH1 725 mfspr r10, SPRN_SPRG_RSCRATCH0 726 b InstructionStorage 727 728/* 729 * Both the instruction and data TLB miss get to this 730 * point to load the TLB. 731 * r10 - free to use 732 * r11 - PTE high word value 733 * r12 - PTE low word value 734 * r13 - free to use 735 * MMUCR - loaded with proper value when we get here 736 * Upon exit, we reload everything and RFI. 737 */ 738finish_tlb_load_47x: 739 /* Combine RPN & ERPN an write WS 1 */ 740 rlwimi r11,r12,0,0,31-PAGE_SHIFT 741 tlbwe r11,r13,1 742 743 /* And make up word 2 */ 744 li r10,0xf85 /* Mask to apply from PTE */ 745 rlwimi r10,r12,29,30,30 /* DIRTY -> SW position */ 746 and r11,r12,r10 /* Mask PTE bits to keep */ 747 andi. r10,r12,_PAGE_USER /* User page ? */ 748 beq 1f /* nope, leave U bits empty */ 749 rlwimi r11,r11,3,26,28 /* yes, copy S bits to U */ 7501: tlbwe r11,r13,2 751 752 /* Done...restore registers and get out of here. 753 */ 754 mfspr r11, SPRN_SPRG_RSCRATCH4 755 mtcr r11 756 mfspr r13, SPRN_SPRG_RSCRATCH3 757 mfspr r12, SPRN_SPRG_RSCRATCH2 758 mfspr r11, SPRN_SPRG_RSCRATCH1 759 mfspr r10, SPRN_SPRG_RSCRATCH0 760 rfi 761 762#endif /* CONFIG_PPC_47x */ 763 764 /* Debug Interrupt */ 765 /* 766 * This statement needs to exist at the end of the IVPR 767 * definition just in case you end up taking a debug 768 * exception within another exception. 769 */ 770 DEBUG_CRIT_EXCEPTION 771 772interrupt_end: 773 774/* 775 * Global functions 776 */ 777 778/* 779 * Adjust the machine check IVOR on 440A cores 780 */ 781_GLOBAL(__fixup_440A_mcheck) 782 li r3,MachineCheckA@l 783 mtspr SPRN_IVOR1,r3 784 sync 785 blr 786 787_GLOBAL(set_context) 788 789#ifdef CONFIG_BDI_SWITCH 790 /* Context switch the PTE pointer for the Abatron BDI2000. 791 * The PGDIR is the second parameter. 792 */ 793 lis r5, abatron_pteptrs@h 794 ori r5, r5, abatron_pteptrs@l 795 stw r4, 0x4(r5) 796#endif 797 mtspr SPRN_PID,r3 798 isync /* Force context change */ 799 blr 800 801/* 802 * Init CPU state. This is called at boot time or for secondary CPUs 803 * to setup initial TLB entries, setup IVORs, etc... 804 * 805 */ 806_GLOBAL(init_cpu_state) 807 mflr r22 808#ifdef CONFIG_PPC_47x 809 /* We use the PVR to differenciate 44x cores from 476 */ 810 mfspr r3,SPRN_PVR 811 srwi r3,r3,16 812 cmplwi cr0,r3,PVR_476FPE@h 813 beq head_start_47x 814 cmplwi cr0,r3,PVR_476@h 815 beq head_start_47x 816 cmplwi cr0,r3,PVR_476_ISS@h 817 beq head_start_47x 818#endif /* CONFIG_PPC_47x */ 819 820/* 821 * In case the firmware didn't do it, we apply some workarounds 822 * that are good for all 440 core variants here 823 */ 824 mfspr r3,SPRN_CCR0 825 rlwinm r3,r3,0,0,27 /* disable icache prefetch */ 826 isync 827 mtspr SPRN_CCR0,r3 828 isync 829 sync 830 831/* 832 * Set up the initial MMU state for 44x 833 * 834 * We are still executing code at the virtual address 835 * mappings set by the firmware for the base of RAM. 836 * 837 * We first invalidate all TLB entries but the one 838 * we are running from. We then load the KERNELBASE 839 * mappings so we can begin to use kernel addresses 840 * natively and so the interrupt vector locations are 841 * permanently pinned (necessary since Book E 842 * implementations always have translation enabled). 843 * 844 * TODO: Use the known TLB entry we are running from to 845 * determine which physical region we are located 846 * in. This can be used to determine where in RAM 847 * (on a shared CPU system) or PCI memory space 848 * (on a DRAMless system) we are located. 849 * For now, we assume a perfect world which means 850 * we are located at the base of DRAM (physical 0). 851 */ 852 853/* 854 * Search TLB for entry that we are currently using. 855 * Invalidate all entries but the one we are using. 856 */ 857 /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */ 858 mfspr r3,SPRN_PID /* Get PID */ 859 mfmsr r4 /* Get MSR */ 860 andi. r4,r4,MSR_IS@l /* TS=1? */ 861 beq wmmucr /* If not, leave STS=0 */ 862 oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */ 863wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */ 864 sync 865 866 bl invstr /* Find our address */ 867invstr: mflr r5 /* Make it accessible */ 868 tlbsx r23,0,r5 /* Find entry we are in */ 869 li r4,0 /* Start at TLB entry 0 */ 870 li r3,0 /* Set PAGEID inval value */ 8711: cmpw r23,r4 /* Is this our entry? */ 872 beq skpinv /* If so, skip the inval */ 873 tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */ 874skpinv: addi r4,r4,1 /* Increment */ 875 cmpwi r4,64 /* Are we done? */ 876 bne 1b /* If not, repeat */ 877 isync /* If so, context change */ 878 879/* 880 * Configure and load pinned entry into TLB slot 63. 881 */ 882#ifdef CONFIG_NONSTATIC_KERNEL 883 /* 884 * In case of a NONSTATIC_KERNEL we reuse the TLB XLAT 885 * entries of the initial mapping set by the boot loader. 886 * The XLAT entry is stored in r25 887 */ 888 889 /* Read the XLAT entry for our current mapping */ 890 tlbre r25,r23,PPC44x_TLB_XLAT 891 892 lis r3,KERNELBASE@h 893 ori r3,r3,KERNELBASE@l 894 895 /* Use our current RPN entry */ 896 mr r4,r25 897#else 898 899 lis r3,PAGE_OFFSET@h 900 ori r3,r3,PAGE_OFFSET@l 901 902 /* Kernel is at the base of RAM */ 903 li r4, 0 /* Load the kernel physical address */ 904#endif 905 906 /* Load the kernel PID = 0 */ 907 li r0,0 908 mtspr SPRN_PID,r0 909 sync 910 911 /* Initialize MMUCR */ 912 li r5,0 913 mtspr SPRN_MMUCR,r5 914 sync 915 916 /* pageid fields */ 917 clrrwi r3,r3,10 /* Mask off the effective page number */ 918 ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M 919 920 /* xlat fields */ 921 clrrwi r4,r4,10 /* Mask off the real page number */ 922 /* ERPN is 0 for first 4GB page */ 923 924 /* attrib fields */ 925 /* Added guarded bit to protect against speculative loads/stores */ 926 li r5,0 927 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G) 928 929 li r0,63 /* TLB slot 63 */ 930 931 tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ 932 tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ 933 tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */ 934 935 /* Force context change */ 936 mfmsr r0 937 mtspr SPRN_SRR1, r0 938 lis r0,3f@h 939 ori r0,r0,3f@l 940 mtspr SPRN_SRR0,r0 941 sync 942 rfi 943 944 /* If necessary, invalidate original entry we used */ 9453: cmpwi r23,63 946 beq 4f 947 li r6,0 948 tlbwe r6,r23,PPC44x_TLB_PAGEID 949 isync 950 9514: 952#ifdef CONFIG_PPC_EARLY_DEBUG_44x 953 /* Add UART mapping for early debug. */ 954 955 /* pageid fields */ 956 lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h 957 ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K 958 959 /* xlat fields */ 960 lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h 961 ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH 962 963 /* attrib fields */ 964 li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G) 965 li r0,62 /* TLB slot 0 */ 966 967 tlbwe r3,r0,PPC44x_TLB_PAGEID 968 tlbwe r4,r0,PPC44x_TLB_XLAT 969 tlbwe r5,r0,PPC44x_TLB_ATTRIB 970 971 /* Force context change */ 972 isync 973#endif /* CONFIG_PPC_EARLY_DEBUG_44x */ 974 975 /* Establish the interrupt vector offsets */ 976 SET_IVOR(0, CriticalInput); 977 SET_IVOR(1, MachineCheck); 978 SET_IVOR(2, DataStorage); 979 SET_IVOR(3, InstructionStorage); 980 SET_IVOR(4, ExternalInput); 981 SET_IVOR(5, Alignment); 982 SET_IVOR(6, Program); 983 SET_IVOR(7, FloatingPointUnavailable); 984 SET_IVOR(8, SystemCall); 985 SET_IVOR(9, AuxillaryProcessorUnavailable); 986 SET_IVOR(10, Decrementer); 987 SET_IVOR(11, FixedIntervalTimer); 988 SET_IVOR(12, WatchdogTimer); 989 SET_IVOR(13, DataTLBError44x); 990 SET_IVOR(14, InstructionTLBError44x); 991 SET_IVOR(15, DebugCrit); 992 993 b head_start_common 994 995 996#ifdef CONFIG_PPC_47x 997 998#ifdef CONFIG_SMP 999 1000/* Entry point for secondary 47x processors */ 1001_GLOBAL(start_secondary_47x) 1002 mr r24,r3 /* CPU number */ 1003 1004 bl init_cpu_state 1005 1006 /* Now we need to bolt the rest of kernel memory which 1007 * is done in C code. We must be careful because our task 1008 * struct or our stack can (and will probably) be out 1009 * of reach of the initial 256M TLB entry, so we use a 1010 * small temporary stack in .bss for that. This works 1011 * because only one CPU at a time can be in this code 1012 */ 1013 lis r1,temp_boot_stack@h 1014 ori r1,r1,temp_boot_stack@l 1015 addi r1,r1,1024-STACK_FRAME_OVERHEAD 1016 li r0,0 1017 stw r0,0(r1) 1018 bl mmu_init_secondary 1019 1020 /* Now we can get our task struct and real stack pointer */ 1021 1022 /* Get current_thread_info and current */ 1023 lis r1,secondary_ti@ha 1024 lwz r1,secondary_ti@l(r1) 1025 lwz r2,TI_TASK(r1) 1026 1027 /* Current stack pointer */ 1028 addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD 1029 li r0,0 1030 stw r0,0(r1) 1031 1032 /* Kernel stack for exception entry in SPRG3 */ 1033 addi r4,r2,THREAD /* init task's THREAD */ 1034 mtspr SPRN_SPRG3,r4 1035 1036 b start_secondary 1037 1038#endif /* CONFIG_SMP */ 1039 1040/* 1041 * Set up the initial MMU state for 44x 1042 * 1043 * We are still executing code at the virtual address 1044 * mappings set by the firmware for the base of RAM. 1045 */ 1046 1047head_start_47x: 1048 /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */ 1049 mfspr r3,SPRN_PID /* Get PID */ 1050 mfmsr r4 /* Get MSR */ 1051 andi. r4,r4,MSR_IS@l /* TS=1? */ 1052 beq 1f /* If not, leave STS=0 */ 1053 oris r3,r3,PPC47x_MMUCR_STS@h /* Set STS=1 */ 10541: mtspr SPRN_MMUCR,r3 /* Put MMUCR */ 1055 sync 1056 1057 /* Find the entry we are running from */ 1058 bl 1f 10591: mflr r23 1060 tlbsx r23,0,r23 1061 tlbre r24,r23,0 1062 tlbre r25,r23,1 1063 tlbre r26,r23,2 1064 1065/* 1066 * Cleanup time 1067 */ 1068 1069 /* Initialize MMUCR */ 1070 li r5,0 1071 mtspr SPRN_MMUCR,r5 1072 sync 1073 1074clear_all_utlb_entries: 1075 1076 #; Set initial values. 1077 1078 addis r3,0,0x8000 1079 addi r4,0,0 1080 addi r5,0,0 1081 b clear_utlb_entry 1082 1083 #; Align the loop to speed things up. 1084 1085 .align 6 1086 1087clear_utlb_entry: 1088 1089 tlbwe r4,r3,0 1090 tlbwe r5,r3,1 1091 tlbwe r5,r3,2 1092 addis r3,r3,0x2000 1093 cmpwi r3,0 1094 bne clear_utlb_entry 1095 addis r3,0,0x8000 1096 addis r4,r4,0x100 1097 cmpwi r4,0 1098 bne clear_utlb_entry 1099 1100 #; Restore original entry. 1101 1102 oris r23,r23,0x8000 /* specify the way */ 1103 tlbwe r24,r23,0 1104 tlbwe r25,r23,1 1105 tlbwe r26,r23,2 1106 1107/* 1108 * Configure and load pinned entry into TLB for the kernel core 1109 */ 1110 1111 lis r3,PAGE_OFFSET@h 1112 ori r3,r3,PAGE_OFFSET@l 1113 1114 /* Load the kernel PID = 0 */ 1115 li r0,0 1116 mtspr SPRN_PID,r0 1117 sync 1118 1119 /* Word 0 */ 1120 clrrwi r3,r3,12 /* Mask off the effective page number */ 1121 ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M 1122 1123 /* Word 1 - use r25. RPN is the same as the original entry */ 1124 1125 /* Word 2 */ 1126 li r5,0 1127 ori r5,r5,PPC47x_TLB2_S_RWX 1128#ifdef CONFIG_SMP 1129 ori r5,r5,PPC47x_TLB2_M 1130#endif 1131 1132 /* We write to way 0 and bolted 0 */ 1133 lis r0,0x8800 1134 tlbwe r3,r0,0 1135 tlbwe r25,r0,1 1136 tlbwe r5,r0,2 1137 1138/* 1139 * Configure SSPCR, ISPCR and USPCR for now to search everything, we can fix 1140 * them up later 1141 */ 1142 LOAD_REG_IMMEDIATE(r3, 0x9abcdef0) 1143 mtspr SPRN_SSPCR,r3 1144 mtspr SPRN_USPCR,r3 1145 LOAD_REG_IMMEDIATE(r3, 0x12345670) 1146 mtspr SPRN_ISPCR,r3 1147 1148 /* Force context change */ 1149 mfmsr r0 1150 mtspr SPRN_SRR1, r0 1151 lis r0,3f@h 1152 ori r0,r0,3f@l 1153 mtspr SPRN_SRR0,r0 1154 sync 1155 rfi 1156 1157 /* Invalidate original entry we used */ 11583: 1159 rlwinm r24,r24,0,21,19 /* clear the "valid" bit */ 1160 tlbwe r24,r23,0 1161 addi r24,0,0 1162 tlbwe r24,r23,1 1163 tlbwe r24,r23,2 1164 isync /* Clear out the shadow TLB entries */ 1165 1166#ifdef CONFIG_PPC_EARLY_DEBUG_44x 1167 /* Add UART mapping for early debug. */ 1168 1169 /* Word 0 */ 1170 lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h 1171 ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_TS | PPC47x_TLB0_1M 1172 1173 /* Word 1 */ 1174 lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h 1175 ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH 1176 1177 /* Word 2 */ 1178 li r5,(PPC47x_TLB2_S_RW | PPC47x_TLB2_IMG) 1179 1180 /* Bolted in way 0, bolt slot 5, we -hope- we don't hit the same 1181 * congruence class as the kernel, we need to make sure of it at 1182 * some point 1183 */ 1184 lis r0,0x8d00 1185 tlbwe r3,r0,0 1186 tlbwe r4,r0,1 1187 tlbwe r5,r0,2 1188 1189 /* Force context change */ 1190 isync 1191#endif /* CONFIG_PPC_EARLY_DEBUG_44x */ 1192 1193 /* Establish the interrupt vector offsets */ 1194 SET_IVOR(0, CriticalInput); 1195 SET_IVOR(1, MachineCheckA); 1196 SET_IVOR(2, DataStorage); 1197 SET_IVOR(3, InstructionStorage); 1198 SET_IVOR(4, ExternalInput); 1199 SET_IVOR(5, Alignment); 1200 SET_IVOR(6, Program); 1201 SET_IVOR(7, FloatingPointUnavailable); 1202 SET_IVOR(8, SystemCall); 1203 SET_IVOR(9, AuxillaryProcessorUnavailable); 1204 SET_IVOR(10, Decrementer); 1205 SET_IVOR(11, FixedIntervalTimer); 1206 SET_IVOR(12, WatchdogTimer); 1207 SET_IVOR(13, DataTLBError47x); 1208 SET_IVOR(14, InstructionTLBError47x); 1209 SET_IVOR(15, DebugCrit); 1210 1211 /* We configure icbi to invalidate 128 bytes at a time since the 1212 * current 32-bit kernel code isn't too happy with icache != dcache 1213 * block size 1214 */ 1215 mfspr r3,SPRN_CCR0 1216 oris r3,r3,0x0020 1217 mtspr SPRN_CCR0,r3 1218 isync 1219 1220#endif /* CONFIG_PPC_47x */ 1221 1222/* 1223 * Here we are back to code that is common between 44x and 47x 1224 * 1225 * We proceed to further kernel initialization and return to the 1226 * main kernel entry 1227 */ 1228head_start_common: 1229 /* Establish the interrupt vector base */ 1230 lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ 1231 mtspr SPRN_IVPR,r4 1232 1233 /* 1234 * If the kernel was loaded at a non-zero 256 MB page, we need to 1235 * mask off the most significant 4 bits to get the relative address 1236 * from the start of physical memory 1237 */ 1238 rlwinm r22,r22,0,4,31 1239 addis r22,r22,PAGE_OFFSET@h 1240 mtlr r22 1241 isync 1242 blr 1243 1244/* 1245 * We put a few things here that have to be page-aligned. This stuff 1246 * goes at the beginning of the data segment, which is page-aligned. 1247 */ 1248 .data 1249 .align PAGE_SHIFT 1250 .globl sdata 1251sdata: 1252 .globl empty_zero_page 1253empty_zero_page: 1254 .space PAGE_SIZE 1255 1256/* 1257 * To support >32-bit physical addresses, we use an 8KB pgdir. 1258 */ 1259 .globl swapper_pg_dir 1260swapper_pg_dir: 1261 .space PGD_TABLE_SIZE 1262 1263/* 1264 * Room for two PTE pointers, usually the kernel and current user pointers 1265 * to their respective root page table. 1266 */ 1267abatron_pteptrs: 1268 .space 8 1269 1270#ifdef CONFIG_SMP 1271 .align 12 1272temp_boot_stack: 1273 .space 1024 1274#endif /* CONFIG_SMP */ 1275