1/* 2 * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org> 3 * Initial PowerPC version. 4 * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu> 5 * Rewritten for PReP 6 * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au> 7 * Low-level exception handers, MMU support, and rewrite. 8 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> 9 * PowerPC 8xx modifications. 10 * Copyright (c) 1998-1999 TiVo, Inc. 11 * PowerPC 403GCX modifications. 12 * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> 13 * PowerPC 403GCX/405GP modifications. 14 * Copyright 2000 MontaVista Software Inc. 15 * PPC405 modifications 16 * PowerPC 403GCX/405GP modifications. 17 * Author: MontaVista Software, Inc. 18 * frank_rowand@mvista.com or source@mvista.com 19 * debbie_chu@mvista.com 20 * 21 * 22 * Module name: head_4xx.S 23 * 24 * Description: 25 * Kernel execution entry point code. 26 * 27 * This program is free software; you can redistribute it and/or 28 * modify it under the terms of the GNU General Public License 29 * as published by the Free Software Foundation; either version 30 * 2 of the License, or (at your option) any later version. 31 * 32 */ 33 34#include <linux/init.h> 35#include <asm/processor.h> 36#include <asm/page.h> 37#include <asm/mmu.h> 38#include <asm/pgtable.h> 39#include <asm/cputable.h> 40#include <asm/thread_info.h> 41#include <asm/ppc_asm.h> 42#include <asm/asm-offsets.h> 43#include <asm/ptrace.h> 44 45/* As with the other PowerPC ports, it is expected that when code 46 * execution begins here, the following registers contain valid, yet 47 * optional, information: 48 * 49 * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.) 50 * r4 - Starting address of the init RAM disk 51 * r5 - Ending address of the init RAM disk 52 * r6 - Start of kernel command line string (e.g. "mem=96m") 53 * r7 - End of kernel command line string 54 * 55 * This is all going to change RSN when we add bi_recs....... -- Dan 56 */ 57 __HEAD 58_ENTRY(_stext); 59_ENTRY(_start); 60 61 mr r31,r3 /* save device tree ptr */ 62 63 /* We have to turn on the MMU right away so we get cache modes 64 * set correctly. 65 */ 66 bl initial_mmu 67 68/* We now have the lower 16 Meg mapped into TLB entries, and the caches 69 * ready to work. 70 */ 71turn_on_mmu: 72 lis r0,MSR_KERNEL@h 73 ori r0,r0,MSR_KERNEL@l 74 mtspr SPRN_SRR1,r0 75 lis r0,start_here@h 76 ori r0,r0,start_here@l 77 mtspr SPRN_SRR0,r0 78 SYNC 79 rfi /* enables MMU */ 80 b . /* prevent prefetch past rfi */ 81 82/* 83 * This area is used for temporarily saving registers during the 84 * critical exception prolog. 85 */ 86 . = 0xc0 87crit_save: 88_ENTRY(crit_r10) 89 .space 4 90_ENTRY(crit_r11) 91 .space 4 92_ENTRY(crit_srr0) 93 .space 4 94_ENTRY(crit_srr1) 95 .space 4 96_ENTRY(saved_ksp_limit) 97 .space 4 98 99/* 100 * Exception vector entry code. This code runs with address translation 101 * turned off (i.e. using physical addresses). We assume SPRG_THREAD has 102 * the physical address of the current task thread_struct. 103 * Note that we have to have decremented r1 before we write to any fields 104 * of the exception frame, since a critical interrupt could occur at any 105 * time, and it will write to the area immediately below the current r1. 106 */ 107#define NORMAL_EXCEPTION_PROLOG \ 108 mtspr SPRN_SPRG_SCRATCH0,r10; /* save two registers to work with */\ 109 mtspr SPRN_SPRG_SCRATCH1,r11; \ 110 mtspr SPRN_SPRG_SCRATCH2,r1; \ 111 mfcr r10; /* save CR in r10 for now */\ 112 mfspr r11,SPRN_SRR1; /* check whether user or kernel */\ 113 andi. r11,r11,MSR_PR; \ 114 beq 1f; \ 115 mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\ 116 lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\ 117 addi r1,r1,THREAD_SIZE; \ 1181: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\ 119 tophys(r11,r1); \ 120 stw r10,_CCR(r11); /* save various registers */\ 121 stw r12,GPR12(r11); \ 122 stw r9,GPR9(r11); \ 123 mfspr r10,SPRN_SPRG_SCRATCH0; \ 124 stw r10,GPR10(r11); \ 125 mfspr r12,SPRN_SPRG_SCRATCH1; \ 126 stw r12,GPR11(r11); \ 127 mflr r10; \ 128 stw r10,_LINK(r11); \ 129 mfspr r10,SPRN_SPRG_SCRATCH2; \ 130 mfspr r12,SPRN_SRR0; \ 131 stw r10,GPR1(r11); \ 132 mfspr r9,SPRN_SRR1; \ 133 stw r10,0(r11); \ 134 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ 135 stw r0,GPR0(r11); \ 136 SAVE_4GPRS(3, r11); \ 137 SAVE_2GPRS(7, r11) 138 139/* 140 * Exception prolog for critical exceptions. This is a little different 141 * from the normal exception prolog above since a critical exception 142 * can potentially occur at any point during normal exception processing. 143 * Thus we cannot use the same SPRG registers as the normal prolog above. 144 * Instead we use a couple of words of memory at low physical addresses. 145 * This is OK since we don't support SMP on these processors. 146 */ 147#define CRITICAL_EXCEPTION_PROLOG \ 148 stw r10,crit_r10@l(0); /* save two registers to work with */\ 149 stw r11,crit_r11@l(0); \ 150 mfcr r10; /* save CR in r10 for now */\ 151 mfspr r11,SPRN_SRR3; /* check whether user or kernel */\ 152 andi. r11,r11,MSR_PR; \ 153 lis r11,critirq_ctx@ha; \ 154 tophys(r11,r11); \ 155 lwz r11,critirq_ctx@l(r11); \ 156 beq 1f; \ 157 /* COMING FROM USER MODE */ \ 158 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\ 159 lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ 1601: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\ 161 tophys(r11,r11); \ 162 stw r10,_CCR(r11); /* save various registers */\ 163 stw r12,GPR12(r11); \ 164 stw r9,GPR9(r11); \ 165 mflr r10; \ 166 stw r10,_LINK(r11); \ 167 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ 168 stw r12,_DEAR(r11); /* since they may have had stuff */\ 169 mfspr r9,SPRN_ESR; /* in them at the point where the */\ 170 stw r9,_ESR(r11); /* exception was taken */\ 171 mfspr r12,SPRN_SRR2; \ 172 stw r1,GPR1(r11); \ 173 mfspr r9,SPRN_SRR3; \ 174 stw r1,0(r11); \ 175 tovirt(r1,r11); \ 176 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ 177 stw r0,GPR0(r11); \ 178 SAVE_4GPRS(3, r11); \ 179 SAVE_2GPRS(7, r11) 180 181 /* 182 * State at this point: 183 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE 184 * r10 saved in crit_r10 and in stack frame, trashed 185 * r11 saved in crit_r11 and in stack frame, 186 * now phys stack/exception frame pointer 187 * r12 saved in stack frame, now saved SRR2 188 * CR saved in stack frame, CR0.EQ = !SRR3.PR 189 * LR, DEAR, ESR in stack frame 190 * r1 saved in stack frame, now virt stack/excframe pointer 191 * r0, r3-r8 saved in stack frame 192 */ 193 194/* 195 * Exception vectors. 196 */ 197#define START_EXCEPTION(n, label) \ 198 . = n; \ 199label: 200 201#define EXCEPTION(n, label, hdlr, xfer) \ 202 START_EXCEPTION(n, label); \ 203 NORMAL_EXCEPTION_PROLOG; \ 204 addi r3,r1,STACK_FRAME_OVERHEAD; \ 205 xfer(n, hdlr) 206 207#define CRITICAL_EXCEPTION(n, label, hdlr) \ 208 START_EXCEPTION(n, label); \ 209 CRITICAL_EXCEPTION_PROLOG; \ 210 addi r3,r1,STACK_FRAME_OVERHEAD; \ 211 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ 212 NOCOPY, crit_transfer_to_handler, \ 213 ret_from_crit_exc) 214 215#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \ 216 li r10,trap; \ 217 stw r10,_TRAP(r11); \ 218 lis r10,msr@h; \ 219 ori r10,r10,msr@l; \ 220 copyee(r10, r9); \ 221 bl tfer; \ 222 .long hdlr; \ 223 .long ret 224 225#define COPY_EE(d, s) rlwimi d,s,0,16,16 226#define NOCOPY(d, s) 227 228#define EXC_XFER_STD(n, hdlr) \ 229 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \ 230 ret_from_except_full) 231 232#define EXC_XFER_LITE(n, hdlr) \ 233 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \ 234 ret_from_except) 235 236#define EXC_XFER_EE(n, hdlr) \ 237 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \ 238 ret_from_except_full) 239 240#define EXC_XFER_EE_LITE(n, hdlr) \ 241 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ 242 ret_from_except) 243 244 245/* 246 * 0x0100 - Critical Interrupt Exception 247 */ 248 CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception) 249 250/* 251 * 0x0200 - Machine Check Exception 252 */ 253 CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) 254 255/* 256 * 0x0300 - Data Storage Exception 257 * This happens for just a few reasons. U0 set (but we don't do that), 258 * or zone protection fault (user violation, write to protected page). 259 * If this is just an update of modified status, we do that quickly 260 * and exit. Otherwise, we call heavywight functions to do the work. 261 */ 262 START_EXCEPTION(0x0300, DataStorage) 263 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ 264 mtspr SPRN_SPRG_SCRATCH1, r11 265#ifdef CONFIG_403GCX 266 stw r12, 0(r0) 267 stw r9, 4(r0) 268 mfcr r11 269 mfspr r12, SPRN_PID 270 stw r11, 8(r0) 271 stw r12, 12(r0) 272#else 273 mtspr SPRN_SPRG_SCRATCH3, r12 274 mtspr SPRN_SPRG_SCRATCH4, r9 275 mfcr r11 276 mfspr r12, SPRN_PID 277 mtspr SPRN_SPRG_SCRATCH6, r11 278 mtspr SPRN_SPRG_SCRATCH5, r12 279#endif 280 281 /* First, check if it was a zone fault (which means a user 282 * tried to access a kernel or read-protected page - always 283 * a SEGV). All other faults here must be stores, so no 284 * need to check ESR_DST as well. */ 285 mfspr r10, SPRN_ESR 286 andis. r10, r10, ESR_DIZ@h 287 bne 2f 288 289 mfspr r10, SPRN_DEAR /* Get faulting address */ 290 291 /* If we are faulting a kernel address, we have to use the 292 * kernel page tables. 293 */ 294 lis r11, PAGE_OFFSET@h 295 cmplw r10, r11 296 blt+ 3f 297 lis r11, swapper_pg_dir@h 298 ori r11, r11, swapper_pg_dir@l 299 li r9, 0 300 mtspr SPRN_PID, r9 /* TLB will have 0 TID */ 301 b 4f 302 303 /* Get the PGD for the current thread. 304 */ 3053: 306 mfspr r11,SPRN_SPRG_THREAD 307 lwz r11,PGDIR(r11) 3084: 309 tophys(r11, r11) 310 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ 311 lwz r11, 0(r11) /* Get L1 entry */ 312 rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */ 313 beq 2f /* Bail if no table */ 314 315 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */ 316 lwz r11, 0(r12) /* Get Linux PTE */ 317 318 andi. r9, r11, _PAGE_RW /* Is it writeable? */ 319 beq 2f /* Bail if not */ 320 321 /* Update 'changed'. 322 */ 323 ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE 324 stw r11, 0(r12) /* Update Linux page table */ 325 326 /* Most of the Linux PTE is ready to load into the TLB LO. 327 * We set ZSEL, where only the LS-bit determines user access. 328 * We set execute, because we don't have the granularity to 329 * properly set this at the page level (Linux problem). 330 * If shared is set, we cause a zero PID->TID load. 331 * Many of these bits are software only. Bits we don't set 332 * here we (properly should) assume have the appropriate value. 333 */ 334 li r12, 0x0ce2 335 andc r11, r11, r12 /* Make sure 20, 21 are zero */ 336 337 /* find the TLB index that caused the fault. It has to be here. 338 */ 339 tlbsx r9, 0, r10 340 341 tlbwe r11, r9, TLB_DATA /* Load TLB LO */ 342 343 /* Done...restore registers and get out of here. 344 */ 345#ifdef CONFIG_403GCX 346 lwz r12, 12(r0) 347 lwz r11, 8(r0) 348 mtspr SPRN_PID, r12 349 mtcr r11 350 lwz r9, 4(r0) 351 lwz r12, 0(r0) 352#else 353 mfspr r12, SPRN_SPRG_SCRATCH5 354 mfspr r11, SPRN_SPRG_SCRATCH6 355 mtspr SPRN_PID, r12 356 mtcr r11 357 mfspr r9, SPRN_SPRG_SCRATCH4 358 mfspr r12, SPRN_SPRG_SCRATCH3 359#endif 360 mfspr r11, SPRN_SPRG_SCRATCH1 361 mfspr r10, SPRN_SPRG_SCRATCH0 362 PPC405_ERR77_SYNC 363 rfi /* Should sync shadow TLBs */ 364 b . /* prevent prefetch past rfi */ 365 3662: 367 /* The bailout. Restore registers to pre-exception conditions 368 * and call the heavyweights to help us out. 369 */ 370#ifdef CONFIG_403GCX 371 lwz r12, 12(r0) 372 lwz r11, 8(r0) 373 mtspr SPRN_PID, r12 374 mtcr r11 375 lwz r9, 4(r0) 376 lwz r12, 0(r0) 377#else 378 mfspr r12, SPRN_SPRG_SCRATCH5 379 mfspr r11, SPRN_SPRG_SCRATCH6 380 mtspr SPRN_PID, r12 381 mtcr r11 382 mfspr r9, SPRN_SPRG_SCRATCH4 383 mfspr r12, SPRN_SPRG_SCRATCH3 384#endif 385 mfspr r11, SPRN_SPRG_SCRATCH1 386 mfspr r10, SPRN_SPRG_SCRATCH0 387 b DataAccess 388 389/* 390 * 0x0400 - Instruction Storage Exception 391 * This is caused by a fetch from non-execute or guarded pages. 392 */ 393 START_EXCEPTION(0x0400, InstructionAccess) 394 NORMAL_EXCEPTION_PROLOG 395 mr r4,r12 /* Pass SRR0 as arg2 */ 396 li r5,0 /* Pass zero as arg3 */ 397 EXC_XFER_LITE(0x400, handle_page_fault) 398 399/* 0x0500 - External Interrupt Exception */ 400 EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) 401 402/* 0x0600 - Alignment Exception */ 403 START_EXCEPTION(0x0600, Alignment) 404 NORMAL_EXCEPTION_PROLOG 405 mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */ 406 stw r4,_DEAR(r11) 407 addi r3,r1,STACK_FRAME_OVERHEAD 408 EXC_XFER_EE(0x600, alignment_exception) 409 410/* 0x0700 - Program Exception */ 411 START_EXCEPTION(0x0700, ProgramCheck) 412 NORMAL_EXCEPTION_PROLOG 413 mfspr r4,SPRN_ESR /* Grab the ESR and save it */ 414 stw r4,_ESR(r11) 415 addi r3,r1,STACK_FRAME_OVERHEAD 416 EXC_XFER_STD(0x700, program_check_exception) 417 418 EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE) 419 EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE) 420 EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE) 421 EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE) 422 423/* 0x0C00 - System Call Exception */ 424 START_EXCEPTION(0x0C00, SystemCall) 425 NORMAL_EXCEPTION_PROLOG 426 EXC_XFER_EE_LITE(0xc00, DoSyscall) 427 428 EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE) 429 EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE) 430 EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE) 431 432/* 0x1000 - Programmable Interval Timer (PIT) Exception */ 433 START_EXCEPTION(0x1000, Decrementer) 434 NORMAL_EXCEPTION_PROLOG 435 lis r0,TSR_PIS@h 436 mtspr SPRN_TSR,r0 /* Clear the PIT exception */ 437 addi r3,r1,STACK_FRAME_OVERHEAD 438 EXC_XFER_LITE(0x1000, timer_interrupt) 439 440#if 0 441/* NOTE: 442 * FIT and WDT handlers are not implemented yet. 443 */ 444 445/* 0x1010 - Fixed Interval Timer (FIT) Exception 446*/ 447 STND_EXCEPTION(0x1010, FITException, unknown_exception) 448 449/* 0x1020 - Watchdog Timer (WDT) Exception 450*/ 451#ifdef CONFIG_BOOKE_WDT 452 CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException) 453#else 454 CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception) 455#endif 456#endif 457 458/* 0x1100 - Data TLB Miss Exception 459 * As the name implies, translation is not in the MMU, so search the 460 * page tables and fix it. The only purpose of this function is to 461 * load TLB entries from the page table if they exist. 462 */ 463 START_EXCEPTION(0x1100, DTLBMiss) 464 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ 465 mtspr SPRN_SPRG_SCRATCH1, r11 466#ifdef CONFIG_403GCX 467 stw r12, 0(r0) 468 stw r9, 4(r0) 469 mfcr r11 470 mfspr r12, SPRN_PID 471 stw r11, 8(r0) 472 stw r12, 12(r0) 473#else 474 mtspr SPRN_SPRG_SCRATCH3, r12 475 mtspr SPRN_SPRG_SCRATCH4, r9 476 mfcr r11 477 mfspr r12, SPRN_PID 478 mtspr SPRN_SPRG_SCRATCH6, r11 479 mtspr SPRN_SPRG_SCRATCH5, r12 480#endif 481 mfspr r10, SPRN_DEAR /* Get faulting address */ 482 483 /* If we are faulting a kernel address, we have to use the 484 * kernel page tables. 485 */ 486 lis r11, PAGE_OFFSET@h 487 cmplw r10, r11 488 blt+ 3f 489 lis r11, swapper_pg_dir@h 490 ori r11, r11, swapper_pg_dir@l 491 li r9, 0 492 mtspr SPRN_PID, r9 /* TLB will have 0 TID */ 493 b 4f 494 495 /* Get the PGD for the current thread. 496 */ 4973: 498 mfspr r11,SPRN_SPRG_THREAD 499 lwz r11,PGDIR(r11) 5004: 501 tophys(r11, r11) 502 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ 503 lwz r12, 0(r11) /* Get L1 entry */ 504 andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */ 505 beq 2f /* Bail if no table */ 506 507 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */ 508 lwz r11, 0(r12) /* Get Linux PTE */ 509 andi. r9, r11, _PAGE_PRESENT 510 beq 5f 511 512 ori r11, r11, _PAGE_ACCESSED 513 stw r11, 0(r12) 514 515 /* Create TLB tag. This is the faulting address plus a static 516 * set of bits. These are size, valid, E, U0. 517 */ 518 li r12, 0x00c0 519 rlwimi r10, r12, 0, 20, 31 520 521 b finish_tlb_load 522 5232: /* Check for possible large-page pmd entry */ 524 rlwinm. r9, r12, 2, 22, 24 525 beq 5f 526 527 /* Create TLB tag. This is the faulting address, plus a static 528 * set of bits (valid, E, U0) plus the size from the PMD. 529 */ 530 ori r9, r9, 0x40 531 rlwimi r10, r9, 0, 20, 31 532 mr r11, r12 533 534 b finish_tlb_load 535 5365: 537 /* The bailout. Restore registers to pre-exception conditions 538 * and call the heavyweights to help us out. 539 */ 540#ifdef CONFIG_403GCX 541 lwz r12, 12(r0) 542 lwz r11, 8(r0) 543 mtspr SPRN_PID, r12 544 mtcr r11 545 lwz r9, 4(r0) 546 lwz r12, 0(r0) 547#else 548 mfspr r12, SPRN_SPRG_SCRATCH5 549 mfspr r11, SPRN_SPRG_SCRATCH6 550 mtspr SPRN_PID, r12 551 mtcr r11 552 mfspr r9, SPRN_SPRG_SCRATCH4 553 mfspr r12, SPRN_SPRG_SCRATCH3 554#endif 555 mfspr r11, SPRN_SPRG_SCRATCH1 556 mfspr r10, SPRN_SPRG_SCRATCH0 557 b DataAccess 558 559/* 0x1200 - Instruction TLB Miss Exception 560 * Nearly the same as above, except we get our information from different 561 * registers and bailout to a different point. 562 */ 563 START_EXCEPTION(0x1200, ITLBMiss) 564 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */ 565 mtspr SPRN_SPRG_SCRATCH1, r11 566#ifdef CONFIG_403GCX 567 stw r12, 0(r0) 568 stw r9, 4(r0) 569 mfcr r11 570 mfspr r12, SPRN_PID 571 stw r11, 8(r0) 572 stw r12, 12(r0) 573#else 574 mtspr SPRN_SPRG_SCRATCH3, r12 575 mtspr SPRN_SPRG_SCRATCH4, r9 576 mfcr r11 577 mfspr r12, SPRN_PID 578 mtspr SPRN_SPRG_SCRATCH6, r11 579 mtspr SPRN_SPRG_SCRATCH5, r12 580#endif 581 mfspr r10, SPRN_SRR0 /* Get faulting address */ 582 583 /* If we are faulting a kernel address, we have to use the 584 * kernel page tables. 585 */ 586 lis r11, PAGE_OFFSET@h 587 cmplw r10, r11 588 blt+ 3f 589 lis r11, swapper_pg_dir@h 590 ori r11, r11, swapper_pg_dir@l 591 li r9, 0 592 mtspr SPRN_PID, r9 /* TLB will have 0 TID */ 593 b 4f 594 595 /* Get the PGD for the current thread. 596 */ 5973: 598 mfspr r11,SPRN_SPRG_THREAD 599 lwz r11,PGDIR(r11) 6004: 601 tophys(r11, r11) 602 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ 603 lwz r12, 0(r11) /* Get L1 entry */ 604 andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */ 605 beq 2f /* Bail if no table */ 606 607 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */ 608 lwz r11, 0(r12) /* Get Linux PTE */ 609 andi. r9, r11, _PAGE_PRESENT 610 beq 5f 611 612 ori r11, r11, _PAGE_ACCESSED 613 stw r11, 0(r12) 614 615 /* Create TLB tag. This is the faulting address plus a static 616 * set of bits. These are size, valid, E, U0. 617 */ 618 li r12, 0x00c0 619 rlwimi r10, r12, 0, 20, 31 620 621 b finish_tlb_load 622 6232: /* Check for possible large-page pmd entry */ 624 rlwinm. r9, r12, 2, 22, 24 625 beq 5f 626 627 /* Create TLB tag. This is the faulting address, plus a static 628 * set of bits (valid, E, U0) plus the size from the PMD. 629 */ 630 ori r9, r9, 0x40 631 rlwimi r10, r9, 0, 20, 31 632 mr r11, r12 633 634 b finish_tlb_load 635 6365: 637 /* The bailout. Restore registers to pre-exception conditions 638 * and call the heavyweights to help us out. 639 */ 640#ifdef CONFIG_403GCX 641 lwz r12, 12(r0) 642 lwz r11, 8(r0) 643 mtspr SPRN_PID, r12 644 mtcr r11 645 lwz r9, 4(r0) 646 lwz r12, 0(r0) 647#else 648 mfspr r12, SPRN_SPRG_SCRATCH5 649 mfspr r11, SPRN_SPRG_SCRATCH6 650 mtspr SPRN_PID, r12 651 mtcr r11 652 mfspr r9, SPRN_SPRG_SCRATCH4 653 mfspr r12, SPRN_SPRG_SCRATCH3 654#endif 655 mfspr r11, SPRN_SPRG_SCRATCH1 656 mfspr r10, SPRN_SPRG_SCRATCH0 657 b InstructionAccess 658 659 EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE) 660 EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE) 661 EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) 662 EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE) 663#ifdef CONFIG_IBM405_ERR51 664 /* 405GP errata 51 */ 665 START_EXCEPTION(0x1700, Trap_17) 666 b DTLBMiss 667#else 668 EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE) 669#endif 670 EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) 671 EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) 672 EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE) 673 EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE) 674 EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE) 675 EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE) 676 EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE) 677 EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE) 678 679/* Check for a single step debug exception while in an exception 680 * handler before state has been saved. This is to catch the case 681 * where an instruction that we are trying to single step causes 682 * an exception (eg ITLB/DTLB miss) and thus the first instruction of 683 * the exception handler generates a single step debug exception. 684 * 685 * If we get a debug trap on the first instruction of an exception handler, 686 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is 687 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR). 688 * The exception handler was handling a non-critical interrupt, so it will 689 * save (and later restore) the MSR via SPRN_SRR1, which will still have 690 * the MSR_DE bit set. 691 */ 692 /* 0x2000 - Debug Exception */ 693 START_EXCEPTION(0x2000, DebugTrap) 694 CRITICAL_EXCEPTION_PROLOG 695 696 /* 697 * If this is a single step or branch-taken exception in an 698 * exception entry sequence, it was probably meant to apply to 699 * the code where the exception occurred (since exception entry 700 * doesn't turn off DE automatically). We simulate the effect 701 * of turning off DE on entry to an exception handler by turning 702 * off DE in the SRR3 value and clearing the debug status. 703 */ 704 mfspr r10,SPRN_DBSR /* check single-step/branch taken */ 705 andis. r10,r10,DBSR_IC@h 706 beq+ 2f 707 708 andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */ 709 beq 1f /* branch and fix it up */ 710 711 mfspr r10,SPRN_SRR2 /* Faulting instruction address */ 712 cmplwi r10,0x2100 713 bgt+ 2f /* address above exception vectors */ 714 715 /* here it looks like we got an inappropriate debug exception. */ 7161: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */ 717 lis r10,DBSR_IC@h /* clear the IC event */ 718 mtspr SPRN_DBSR,r10 719 /* restore state and get out */ 720 lwz r10,_CCR(r11) 721 lwz r0,GPR0(r11) 722 lwz r1,GPR1(r11) 723 mtcrf 0x80,r10 724 mtspr SPRN_SRR2,r12 725 mtspr SPRN_SRR3,r9 726 lwz r9,GPR9(r11) 727 lwz r12,GPR12(r11) 728 lwz r10,crit_r10@l(0) 729 lwz r11,crit_r11@l(0) 730 PPC405_ERR77_SYNC 731 rfci 732 b . 733 734 /* continue normal handling for a critical exception... */ 7352: mfspr r4,SPRN_DBSR 736 addi r3,r1,STACK_FRAME_OVERHEAD 737 EXC_XFER_TEMPLATE(DebugException, 0x2002, \ 738 (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ 739 NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) 740 741/* 742 * The other Data TLB exceptions bail out to this point 743 * if they can't resolve the lightweight TLB fault. 744 */ 745DataAccess: 746 NORMAL_EXCEPTION_PROLOG 747 mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */ 748 stw r5,_ESR(r11) 749 mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */ 750 EXC_XFER_LITE(0x300, handle_page_fault) 751 752/* Other PowerPC processors, namely those derived from the 6xx-series 753 * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved. 754 * However, for the 4xx-series processors these are neither defined nor 755 * reserved. 756 */ 757 758 /* Damn, I came up one instruction too many to fit into the 759 * exception space :-). Both the instruction and data TLB 760 * miss get to this point to load the TLB. 761 * r10 - TLB_TAG value 762 * r11 - Linux PTE 763 * r12, r9 - available to use 764 * PID - loaded with proper value when we get here 765 * Upon exit, we reload everything and RFI. 766 * Actually, it will fit now, but oh well.....a common place 767 * to load the TLB. 768 */ 769tlb_4xx_index: 770 .long 0 771finish_tlb_load: 772 /* load the next available TLB index. 773 */ 774 lwz r9, tlb_4xx_index@l(0) 775 addi r9, r9, 1 776 andi. r9, r9, (PPC40X_TLB_SIZE-1) 777 stw r9, tlb_4xx_index@l(0) 778 7796: 780 /* 781 * Clear out the software-only bits in the PTE to generate the 782 * TLB_DATA value. These are the bottom 2 bits of the RPM, the 783 * top 3 bits of the zone field, and M. 784 */ 785 li r12, 0x0ce2 786 andc r11, r11, r12 787 788 tlbwe r11, r9, TLB_DATA /* Load TLB LO */ 789 tlbwe r10, r9, TLB_TAG /* Load TLB HI */ 790 791 /* Done...restore registers and get out of here. 792 */ 793#ifdef CONFIG_403GCX 794 lwz r12, 12(r0) 795 lwz r11, 8(r0) 796 mtspr SPRN_PID, r12 797 mtcr r11 798 lwz r9, 4(r0) 799 lwz r12, 0(r0) 800#else 801 mfspr r12, SPRN_SPRG_SCRATCH5 802 mfspr r11, SPRN_SPRG_SCRATCH6 803 mtspr SPRN_PID, r12 804 mtcr r11 805 mfspr r9, SPRN_SPRG_SCRATCH4 806 mfspr r12, SPRN_SPRG_SCRATCH3 807#endif 808 mfspr r11, SPRN_SPRG_SCRATCH1 809 mfspr r10, SPRN_SPRG_SCRATCH0 810 PPC405_ERR77_SYNC 811 rfi /* Should sync shadow TLBs */ 812 b . /* prevent prefetch past rfi */ 813 814/* extern void giveup_fpu(struct task_struct *prev) 815 * 816 * The PowerPC 4xx family of processors do not have an FPU, so this just 817 * returns. 818 */ 819_ENTRY(giveup_fpu) 820 blr 821 822/* This is where the main kernel code starts. 823 */ 824start_here: 825 826 /* ptr to current */ 827 lis r2,init_task@h 828 ori r2,r2,init_task@l 829 830 /* ptr to phys current thread */ 831 tophys(r4,r2) 832 addi r4,r4,THREAD /* init task's THREAD */ 833 mtspr SPRN_SPRG_THREAD,r4 834 835 /* stack */ 836 lis r1,init_thread_union@ha 837 addi r1,r1,init_thread_union@l 838 li r0,0 839 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) 840 841 bl early_init /* We have to do this with MMU on */ 842 843/* 844 * Decide what sort of machine this is and initialize the MMU. 845 */ 846 li r3,0 847 mr r4,r31 848 bl machine_init 849 bl MMU_init 850 851/* Go back to running unmapped so we can load up new values 852 * and change to using our exception vectors. 853 * On the 4xx, all we have to do is invalidate the TLB to clear 854 * the old 16M byte TLB mappings. 855 */ 856 lis r4,2f@h 857 ori r4,r4,2f@l 858 tophys(r4,r4) 859 lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h 860 ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l 861 mtspr SPRN_SRR0,r4 862 mtspr SPRN_SRR1,r3 863 rfi 864 b . /* prevent prefetch past rfi */ 865 866/* Load up the kernel context */ 8672: 868 sync /* Flush to memory before changing TLB */ 869 tlbia 870 isync /* Flush shadow TLBs */ 871 872 /* set up the PTE pointers for the Abatron bdiGDB. 873 */ 874 lis r6, swapper_pg_dir@h 875 ori r6, r6, swapper_pg_dir@l 876 lis r5, abatron_pteptrs@h 877 ori r5, r5, abatron_pteptrs@l 878 stw r5, 0xf0(r0) /* Must match your Abatron config file */ 879 tophys(r5,r5) 880 stw r6, 0(r5) 881 882/* Now turn on the MMU for real! */ 883 lis r4,MSR_KERNEL@h 884 ori r4,r4,MSR_KERNEL@l 885 lis r3,start_kernel@h 886 ori r3,r3,start_kernel@l 887 mtspr SPRN_SRR0,r3 888 mtspr SPRN_SRR1,r4 889 rfi /* enable MMU and jump to start_kernel */ 890 b . /* prevent prefetch past rfi */ 891 892/* Set up the initial MMU state so we can do the first level of 893 * kernel initialization. This maps the first 16 MBytes of memory 1:1 894 * virtual to physical and more importantly sets the cache mode. 895 */ 896initial_mmu: 897 tlbia /* Invalidate all TLB entries */ 898 isync 899 900 /* We should still be executing code at physical address 0x0000xxxx 901 * at this point. However, start_here is at virtual address 902 * 0xC000xxxx. So, set up a TLB mapping to cover this once 903 * translation is enabled. 904 */ 905 906 lis r3,KERNELBASE@h /* Load the kernel virtual address */ 907 ori r3,r3,KERNELBASE@l 908 tophys(r4,r3) /* Load the kernel physical address */ 909 910 iccci r0,r3 /* Invalidate the i-cache before use */ 911 912 /* Load the kernel PID. 913 */ 914 li r0,0 915 mtspr SPRN_PID,r0 916 sync 917 918 /* Configure and load one entry into TLB slots 63 */ 919 clrrwi r4,r4,10 /* Mask off the real page number */ 920 ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ 921 922 clrrwi r3,r3,10 /* Mask off the effective page number */ 923 ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M)) 924 925 li r0,63 /* TLB slot 63 */ 926 927 tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */ 928 tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */ 929 930#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE) 931 932 /* Load a TLB entry for the UART, so that ppc4xx_progress() can use 933 * the UARTs nice and early. We use a 4k real==virtual mapping. */ 934 935 lis r3,SERIAL_DEBUG_IO_BASE@h 936 ori r3,r3,SERIAL_DEBUG_IO_BASE@l 937 mr r4,r3 938 clrrwi r4,r4,12 939 ori r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G) 940 941 clrrwi r3,r3,12 942 ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K)) 943 944 li r0,0 /* TLB slot 0 */ 945 tlbwe r4,r0,TLB_DATA 946 tlbwe r3,r0,TLB_TAG 947#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */ 948 949 isync 950 951 /* Establish the exception vector base 952 */ 953 lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */ 954 tophys(r0,r4) /* Use the physical address */ 955 mtspr SPRN_EVPR,r0 956 957 blr 958 959_GLOBAL(abort) 960 mfspr r13,SPRN_DBCR0 961 oris r13,r13,DBCR0_RST_SYSTEM@h 962 mtspr SPRN_DBCR0,r13 963 964_GLOBAL(set_context) 965 966#ifdef CONFIG_BDI_SWITCH 967 /* Context switch the PTE pointer for the Abatron BDI2000. 968 * The PGDIR is the second parameter. 969 */ 970 lis r5, KERNELBASE@h 971 lwz r5, 0xf0(r5) 972 stw r4, 0x4(r5) 973#endif 974 sync 975 mtspr SPRN_PID,r3 976 isync /* Need an isync to flush shadow */ 977 /* TLBs after changing PID */ 978 blr 979 980/* We put a few things here that have to be page-aligned. This stuff 981 * goes at the beginning of the data segment, which is page-aligned. 982 */ 983 .data 984 .align 12 985 .globl sdata 986sdata: 987 .globl empty_zero_page 988empty_zero_page: 989 .space 4096 990 .globl swapper_pg_dir 991swapper_pg_dir: 992 .space PGD_TABLE_SIZE 993 994/* Room for two PTE pointers, usually the kernel and current user pointers 995 * to their respective root page table. 996 */ 997abatron_pteptrs: 998 .space 8 999