1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * This file contains the 64-bit "server" PowerPC variant 4 * of the low level exception handling including exception 5 * vectors, exception return, part of the slb and stab 6 * handling and other fixed offset specific things. 7 * 8 * This file is meant to be #included from head_64.S due to 9 * position dependent assembly. 10 * 11 * Most of this originates from head_64.S and thus has the same 12 * copyright history. 13 * 14 */ 15 16#include <asm/hw_irq.h> 17#include <asm/exception-64s.h> 18#include <asm/ptrace.h> 19#include <asm/cpuidle.h> 20#include <asm/head-64.h> 21#include <asm/feature-fixups.h> 22#include <asm/kup.h> 23 24/* PACA save area offsets (exgen, exmc, etc) */ 25#define EX_R9 0 26#define EX_R10 8 27#define EX_R11 16 28#define EX_R12 24 29#define EX_R13 32 30#define EX_DAR 40 31#define EX_DSISR 48 32#define EX_CCR 52 33#define EX_CFAR 56 34#define EX_PPR 64 35#if defined(CONFIG_RELOCATABLE) 36#define EX_CTR 72 37.if EX_SIZE != 10 38 .error "EX_SIZE is wrong" 39.endif 40#else 41.if EX_SIZE != 9 42 .error "EX_SIZE is wrong" 43.endif 44#endif 45 46/* 47 * Following are fixed section helper macros. 48 * 49 * EXC_REAL_BEGIN/END - real, unrelocated exception vectors 50 * EXC_VIRT_BEGIN/END - virt (AIL), unrelocated exception vectors 51 * TRAMP_REAL_BEGIN - real, unrelocated helpers (virt may call these) 52 * TRAMP_VIRT_BEGIN - virt, unreloc helpers (in practice, real can use) 53 * TRAMP_KVM_BEGIN - KVM handlers, these are put into real, unrelocated 54 * EXC_COMMON - After switching to virtual, relocated mode. 55 */ 56 57#define EXC_REAL_BEGIN(name, start, size) \ 58 FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##name, start, size) 59 60#define EXC_REAL_END(name, start, size) \ 61 FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##name, start, size) 62 63#define EXC_VIRT_BEGIN(name, start, size) \ 64 FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##name, start, size) 65 66#define EXC_VIRT_END(name, start, size) \ 67 FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##name, start, size) 68 69#define EXC_COMMON_BEGIN(name) \ 70 USE_TEXT_SECTION(); \ 71 .balign IFETCH_ALIGN_BYTES; \ 72 .global name; \ 73 _ASM_NOKPROBE_SYMBOL(name); \ 74 DEFINE_FIXED_SYMBOL(name); \ 75name: 76 77#define TRAMP_REAL_BEGIN(name) \ 78 FIXED_SECTION_ENTRY_BEGIN(real_trampolines, name) 79 80#define TRAMP_VIRT_BEGIN(name) \ 81 FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name) 82 83#ifdef CONFIG_KVM_BOOK3S_64_HANDLER 84#define TRAMP_KVM_BEGIN(name) \ 85 TRAMP_VIRT_BEGIN(name) 86#else 87#define TRAMP_KVM_BEGIN(name) 88#endif 89 90#define EXC_REAL_NONE(start, size) \ 91 FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start, size); \ 92 FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, start, size) 93 94#define EXC_VIRT_NONE(start, size) \ 95 FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##unused, start, size); \ 96 FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##unused, start, size) 97 98/* 99 * We're short on space and time in the exception prolog, so we can't 100 * use the normal LOAD_REG_IMMEDIATE macro to load the address of label. 101 * Instead we get the base of the kernel from paca->kernelbase and or in the low 102 * part of label. This requires that the label be within 64KB of kernelbase, and 103 * that kernelbase be 64K aligned. 104 */ 105#define LOAD_HANDLER(reg, label) \ 106 ld reg,PACAKBASE(r13); /* get high part of &label */ \ 107 ori reg,reg,FIXED_SYMBOL_ABS_ADDR(label) 108 109#define __LOAD_HANDLER(reg, label) \ 110 ld reg,PACAKBASE(r13); \ 111 ori reg,reg,(ABS_ADDR(label))@l 112 113/* 114 * Branches from unrelocated code (e.g., interrupts) to labels outside 115 * head-y require >64K offsets. 116 */ 117#define __LOAD_FAR_HANDLER(reg, label) \ 118 ld reg,PACAKBASE(r13); \ 119 ori reg,reg,(ABS_ADDR(label))@l; \ 120 addis reg,reg,(ABS_ADDR(label))@h 121 122/* Exception register prefixes */ 123#define EXC_HV_OR_STD 2 /* depends on HVMODE */ 124#define EXC_HV 1 125#define EXC_STD 0 126 127#if defined(CONFIG_RELOCATABLE) 128/* 129 * If we support interrupts with relocation on AND we're a relocatable kernel, 130 * we need to use CTR to get to the 2nd level handler. So, save/restore it 131 * when required. 132 */ 133#define SAVE_CTR(reg, area) mfctr reg ; std reg,area+EX_CTR(r13) 134#define GET_CTR(reg, area) ld reg,area+EX_CTR(r13) 135#define RESTORE_CTR(reg, area) ld reg,area+EX_CTR(r13) ; mtctr reg 136#else 137/* ...else CTR is unused and in register. */ 138#define SAVE_CTR(reg, area) 139#define GET_CTR(reg, area) mfctr reg 140#define RESTORE_CTR(reg, area) 141#endif 142 143/* 144 * PPR save/restore macros used in exceptions-64s.S 145 * Used for P7 or later processors 146 */ 147#define SAVE_PPR(area, ra) \ 148BEGIN_FTR_SECTION_NESTED(940) \ 149 ld ra,area+EX_PPR(r13); /* Read PPR from paca */ \ 150 std ra,_PPR(r1); \ 151END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940) 152 153#define RESTORE_PPR_PACA(area, ra) \ 154BEGIN_FTR_SECTION_NESTED(941) \ 155 ld ra,area+EX_PPR(r13); \ 156 mtspr SPRN_PPR,ra; \ 157END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941) 158 159/* 160 * Get an SPR into a register if the CPU has the given feature 161 */ 162#define OPT_GET_SPR(ra, spr, ftr) \ 163BEGIN_FTR_SECTION_NESTED(943) \ 164 mfspr ra,spr; \ 165END_FTR_SECTION_NESTED(ftr,ftr,943) 166 167/* 168 * Set an SPR from a register if the CPU has the given feature 169 */ 170#define OPT_SET_SPR(ra, spr, ftr) \ 171BEGIN_FTR_SECTION_NESTED(943) \ 172 mtspr spr,ra; \ 173END_FTR_SECTION_NESTED(ftr,ftr,943) 174 175/* 176 * Save a register to the PACA if the CPU has the given feature 177 */ 178#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \ 179BEGIN_FTR_SECTION_NESTED(943) \ 180 std ra,offset(r13); \ 181END_FTR_SECTION_NESTED(ftr,ftr,943) 182 183/* 184 * Branch to label using its 0xC000 address. This results in instruction 185 * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned 186 * on using mtmsr rather than rfid. 187 * 188 * This could set the 0xc bits for !RELOCATABLE as an immediate, rather than 189 * load KBASE for a slight optimisation. 190 */ 191#define BRANCH_TO_C000(reg, label) \ 192 __LOAD_FAR_HANDLER(reg, label); \ 193 mtctr reg; \ 194 bctr 195 196.macro INT_KVM_HANDLER name, vec, hsrr, area, skip 197 TRAMP_KVM_BEGIN(\name\()_kvm) 198 KVM_HANDLER \vec, \hsrr, \area, \skip 199.endm 200 201#ifdef CONFIG_KVM_BOOK3S_64_HANDLER 202#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE 203/* 204 * If hv is possible, interrupts come into to the hv version 205 * of the kvmppc_interrupt code, which then jumps to the PR handler, 206 * kvmppc_interrupt_pr, if the guest is a PR guest. 207 */ 208#define kvmppc_interrupt kvmppc_interrupt_hv 209#else 210#define kvmppc_interrupt kvmppc_interrupt_pr 211#endif 212 213.macro KVMTEST name, hsrr, n 214 lbz r10,HSTATE_IN_GUEST(r13) 215 cmpwi r10,0 216 bne \name\()_kvm 217.endm 218 219.macro KVM_HANDLER vec, hsrr, area, skip 220 .if \skip 221 cmpwi r10,KVM_GUEST_MODE_SKIP 222 beq 89f 223 .else 224BEGIN_FTR_SECTION_NESTED(947) 225 ld r10,\area+EX_CFAR(r13) 226 std r10,HSTATE_CFAR(r13) 227END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947) 228 .endif 229 230BEGIN_FTR_SECTION_NESTED(948) 231 ld r10,\area+EX_PPR(r13) 232 std r10,HSTATE_PPR(r13) 233END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948) 234 ld r10,\area+EX_R10(r13) 235 std r12,HSTATE_SCRATCH0(r13) 236 sldi r12,r9,32 237 /* HSRR variants have the 0x2 bit added to their trap number */ 238 .if \hsrr == EXC_HV_OR_STD 239 BEGIN_FTR_SECTION 240 ori r12,r12,(\vec + 0x2) 241 FTR_SECTION_ELSE 242 ori r12,r12,(\vec) 243 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 244 .elseif \hsrr 245 ori r12,r12,(\vec + 0x2) 246 .else 247 ori r12,r12,(\vec) 248 .endif 249 250#ifdef CONFIG_RELOCATABLE 251 /* 252 * KVM requires __LOAD_FAR_HANDLER beause kvmppc_interrupt lives 253 * outside the head section. CONFIG_RELOCATABLE KVM expects CTR 254 * to be saved in HSTATE_SCRATCH1. 255 */ 256 mfctr r9 257 std r9,HSTATE_SCRATCH1(r13) 258 __LOAD_FAR_HANDLER(r9, kvmppc_interrupt) 259 mtctr r9 260 ld r9,\area+EX_R9(r13) 261 bctr 262#else 263 ld r9,\area+EX_R9(r13) 264 b kvmppc_interrupt 265#endif 266 267 268 .if \skip 26989: mtocrf 0x80,r9 270 ld r9,\area+EX_R9(r13) 271 ld r10,\area+EX_R10(r13) 272 .if \hsrr == EXC_HV_OR_STD 273 BEGIN_FTR_SECTION 274 b kvmppc_skip_Hinterrupt 275 FTR_SECTION_ELSE 276 b kvmppc_skip_interrupt 277 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 278 .elseif \hsrr 279 b kvmppc_skip_Hinterrupt 280 .else 281 b kvmppc_skip_interrupt 282 .endif 283 .endif 284.endm 285 286#else 287.macro KVMTEST name, hsrr, n 288.endm 289.macro KVM_HANDLER name, vec, hsrr, area, skip 290.endm 291#endif 292 293.macro INT_SAVE_SRR_AND_JUMP label, hsrr, set_ri 294 ld r10,PACAKMSR(r13) /* get MSR value for kernel */ 295 .if ! \set_ri 296 xori r10,r10,MSR_RI /* Clear MSR_RI */ 297 .endif 298 .if \hsrr == EXC_HV_OR_STD 299 BEGIN_FTR_SECTION 300 mfspr r11,SPRN_HSRR0 /* save HSRR0 */ 301 mfspr r12,SPRN_HSRR1 /* and HSRR1 */ 302 mtspr SPRN_HSRR1,r10 303 FTR_SECTION_ELSE 304 mfspr r11,SPRN_SRR0 /* save SRR0 */ 305 mfspr r12,SPRN_SRR1 /* and SRR1 */ 306 mtspr SPRN_SRR1,r10 307 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 308 .elseif \hsrr 309 mfspr r11,SPRN_HSRR0 /* save HSRR0 */ 310 mfspr r12,SPRN_HSRR1 /* and HSRR1 */ 311 mtspr SPRN_HSRR1,r10 312 .else 313 mfspr r11,SPRN_SRR0 /* save SRR0 */ 314 mfspr r12,SPRN_SRR1 /* and SRR1 */ 315 mtspr SPRN_SRR1,r10 316 .endif 317 LOAD_HANDLER(r10, \label\()) 318 .if \hsrr == EXC_HV_OR_STD 319 BEGIN_FTR_SECTION 320 mtspr SPRN_HSRR0,r10 321 HRFI_TO_KERNEL 322 FTR_SECTION_ELSE 323 mtspr SPRN_SRR0,r10 324 RFI_TO_KERNEL 325 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 326 .elseif \hsrr 327 mtspr SPRN_HSRR0,r10 328 HRFI_TO_KERNEL 329 .else 330 mtspr SPRN_SRR0,r10 331 RFI_TO_KERNEL 332 .endif 333 b . /* prevent speculative execution */ 334.endm 335 336/* INT_SAVE_SRR_AND_JUMP works for real or virt, this is faster but virt only */ 337.macro INT_VIRT_SAVE_SRR_AND_JUMP label, hsrr 338#ifdef CONFIG_RELOCATABLE 339 .if \hsrr == EXC_HV_OR_STD 340 BEGIN_FTR_SECTION 341 mfspr r11,SPRN_HSRR0 /* save HSRR0 */ 342 FTR_SECTION_ELSE 343 mfspr r11,SPRN_SRR0 /* save SRR0 */ 344 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 345 .elseif \hsrr 346 mfspr r11,SPRN_HSRR0 /* save HSRR0 */ 347 .else 348 mfspr r11,SPRN_SRR0 /* save SRR0 */ 349 .endif 350 LOAD_HANDLER(r12, \label\()) 351 mtctr r12 352 .if \hsrr == EXC_HV_OR_STD 353 BEGIN_FTR_SECTION 354 mfspr r12,SPRN_HSRR1 /* and HSRR1 */ 355 FTR_SECTION_ELSE 356 mfspr r12,SPRN_SRR1 /* and HSRR1 */ 357 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 358 .elseif \hsrr 359 mfspr r12,SPRN_HSRR1 /* and HSRR1 */ 360 .else 361 mfspr r12,SPRN_SRR1 /* and HSRR1 */ 362 .endif 363 li r10,MSR_RI 364 mtmsrd r10,1 /* Set RI (EE=0) */ 365 bctr 366#else 367 .if \hsrr == EXC_HV_OR_STD 368 BEGIN_FTR_SECTION 369 mfspr r11,SPRN_HSRR0 /* save HSRR0 */ 370 mfspr r12,SPRN_HSRR1 /* and HSRR1 */ 371 FTR_SECTION_ELSE 372 mfspr r11,SPRN_SRR0 /* save SRR0 */ 373 mfspr r12,SPRN_SRR1 /* and SRR1 */ 374 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 375 .elseif \hsrr 376 mfspr r11,SPRN_HSRR0 /* save HSRR0 */ 377 mfspr r12,SPRN_HSRR1 /* and HSRR1 */ 378 .else 379 mfspr r11,SPRN_SRR0 /* save SRR0 */ 380 mfspr r12,SPRN_SRR1 /* and SRR1 */ 381 .endif 382 li r10,MSR_RI 383 mtmsrd r10,1 /* Set RI (EE=0) */ 384 b \label 385#endif 386.endm 387 388/* 389 * This is the BOOK3S interrupt entry code macro. 390 * 391 * This can result in one of several things happening: 392 * - Branch to the _common handler, relocated, in virtual mode. 393 * These are normal interrupts (synchronous and asynchronous) handled by 394 * the kernel. 395 * - Branch to KVM, relocated but real mode interrupts remain in real mode. 396 * These occur when HSTATE_IN_GUEST is set. The interrupt may be caused by 397 * / intended for host or guest kernel, but KVM must always be involved 398 * because the machine state is set for guest execution. 399 * - Branch to the masked handler, unrelocated. 400 * These occur when maskable asynchronous interrupts are taken with the 401 * irq_soft_mask set. 402 * - Branch to an "early" handler in real mode but relocated. 403 * This is done if early=1. MCE and HMI use these to handle errors in real 404 * mode. 405 * - Fall through and continue executing in real, unrelocated mode. 406 * This is done if early=2. 407 */ 408.macro INT_HANDLER name, vec, ool=0, early=0, virt=0, hsrr=0, area=PACA_EXGEN, ri=1, dar=0, dsisr=0, bitmask=0, kvm=0 409 SET_SCRATCH0(r13) /* save r13 */ 410 GET_PACA(r13) 411 std r9,\area\()+EX_R9(r13) /* save r9 */ 412 OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR) 413 HMT_MEDIUM 414 std r10,\area\()+EX_R10(r13) /* save r10 - r12 */ 415 OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR) 416 .if \ool 417 .if !\virt 418 b tramp_real_\name 419 .pushsection .text 420 TRAMP_REAL_BEGIN(tramp_real_\name) 421 .else 422 b tramp_virt_\name 423 .pushsection .text 424 TRAMP_VIRT_BEGIN(tramp_virt_\name) 425 .endif 426 .endif 427 428 OPT_SAVE_REG_TO_PACA(\area\()+EX_PPR, r9, CPU_FTR_HAS_PPR) 429 OPT_SAVE_REG_TO_PACA(\area\()+EX_CFAR, r10, CPU_FTR_CFAR) 430 INTERRUPT_TO_KERNEL 431 SAVE_CTR(r10, \area\()) 432 mfcr r9 433 .if \kvm 434 KVMTEST \name \hsrr \vec 435 .endif 436 .if \bitmask 437 lbz r10,PACAIRQSOFTMASK(r13) 438 andi. r10,r10,\bitmask 439 /* Associate vector numbers with bits in paca->irq_happened */ 440 .if \vec == 0x500 || \vec == 0xea0 441 li r10,PACA_IRQ_EE 442 .elseif \vec == 0x900 443 li r10,PACA_IRQ_DEC 444 .elseif \vec == 0xa00 || \vec == 0xe80 445 li r10,PACA_IRQ_DBELL 446 .elseif \vec == 0xe60 447 li r10,PACA_IRQ_HMI 448 .elseif \vec == 0xf00 449 li r10,PACA_IRQ_PMI 450 .else 451 .abort "Bad maskable vector" 452 .endif 453 454 .if \hsrr == EXC_HV_OR_STD 455 BEGIN_FTR_SECTION 456 bne masked_Hinterrupt 457 FTR_SECTION_ELSE 458 bne masked_interrupt 459 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 460 .elseif \hsrr 461 bne masked_Hinterrupt 462 .else 463 bne masked_interrupt 464 .endif 465 .endif 466 467 std r11,\area\()+EX_R11(r13) 468 std r12,\area\()+EX_R12(r13) 469 470 /* 471 * DAR/DSISR, SCRATCH0 must be read before setting MSR[RI], 472 * because a d-side MCE will clobber those registers so is 473 * not recoverable if they are live. 474 */ 475 GET_SCRATCH0(r10) 476 std r10,\area\()+EX_R13(r13) 477 .if \dar 478 .if \hsrr 479 mfspr r10,SPRN_HDAR 480 .else 481 mfspr r10,SPRN_DAR 482 .endif 483 std r10,\area\()+EX_DAR(r13) 484 .endif 485 .if \dsisr 486 .if \hsrr 487 mfspr r10,SPRN_HDSISR 488 .else 489 mfspr r10,SPRN_DSISR 490 .endif 491 stw r10,\area\()+EX_DSISR(r13) 492 .endif 493 494 .if \early == 2 495 /* nothing more */ 496 .elseif \early 497 mfctr r10 /* save ctr, even for !RELOCATABLE */ 498 BRANCH_TO_C000(r11, \name\()_early_common) 499 .elseif !\virt 500 INT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr, \ri 501 .else 502 INT_VIRT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr 503 .endif 504 .if \ool 505 .popsection 506 .endif 507.endm 508 509/* 510 * On entry r13 points to the paca, r9-r13 are saved in the paca, 511 * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and 512 * SRR1, and relocation is on. 513 * 514 * If stack=0, then the stack is already set in r1, and r1 is saved in r10. 515 * PPR save and CPU accounting is not done for the !stack case (XXX why not?) 516 */ 517.macro INT_COMMON vec, area, stack, kuap, reconcile, dar, dsisr 518 .if \stack 519 andi. r10,r12,MSR_PR /* See if coming from user */ 520 mr r10,r1 /* Save r1 */ 521 subi r1,r1,INT_FRAME_SIZE /* alloc frame on kernel stack */ 522 beq- 100f 523 ld r1,PACAKSAVE(r13) /* kernel stack to use */ 524100: tdgei r1,-INT_FRAME_SIZE /* trap if r1 is in userspace */ 525 EMIT_BUG_ENTRY 100b,__FILE__,__LINE__,0 526 .endif 527 528 std r9,_CCR(r1) /* save CR in stackframe */ 529 std r11,_NIP(r1) /* save SRR0 in stackframe */ 530 std r12,_MSR(r1) /* save SRR1 in stackframe */ 531 std r10,0(r1) /* make stack chain pointer */ 532 std r0,GPR0(r1) /* save r0 in stackframe */ 533 std r10,GPR1(r1) /* save r1 in stackframe */ 534 535 .if \stack 536 .if \kuap 537 kuap_save_amr_and_lock r9, r10, cr1, cr0 538 .endif 539 beq 101f /* if from kernel mode */ 540 ACCOUNT_CPU_USER_ENTRY(r13, r9, r10) 541 SAVE_PPR(\area, r9) 542101: 543 .else 544 .if \kuap 545 kuap_save_amr_and_lock r9, r10, cr1 546 .endif 547 .endif 548 549 /* Save original regs values from save area to stack frame. */ 550 ld r9,\area+EX_R9(r13) /* move r9, r10 to stackframe */ 551 ld r10,\area+EX_R10(r13) 552 std r9,GPR9(r1) 553 std r10,GPR10(r1) 554 ld r9,\area+EX_R11(r13) /* move r11 - r13 to stackframe */ 555 ld r10,\area+EX_R12(r13) 556 ld r11,\area+EX_R13(r13) 557 std r9,GPR11(r1) 558 std r10,GPR12(r1) 559 std r11,GPR13(r1) 560 .if \dar 561 .if \dar == 2 562 ld r10,_NIP(r1) 563 .else 564 ld r10,\area+EX_DAR(r13) 565 .endif 566 std r10,_DAR(r1) 567 .endif 568 .if \dsisr 569 .if \dsisr == 2 570 ld r10,_MSR(r1) 571 lis r11,DSISR_SRR1_MATCH_64S@h 572 and r10,r10,r11 573 .else 574 lwz r10,\area+EX_DSISR(r13) 575 .endif 576 std r10,_DSISR(r1) 577 .endif 578BEGIN_FTR_SECTION_NESTED(66) 579 ld r10,\area+EX_CFAR(r13) 580 std r10,ORIG_GPR3(r1) 581END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66) 582 GET_CTR(r10, \area) 583 std r10,_CTR(r1) 584 std r2,GPR2(r1) /* save r2 in stackframe */ 585 SAVE_4GPRS(3, r1) /* save r3 - r6 in stackframe */ 586 SAVE_2GPRS(7, r1) /* save r7, r8 in stackframe */ 587 mflr r9 /* Get LR, later save to stack */ 588 ld r2,PACATOC(r13) /* get kernel TOC into r2 */ 589 std r9,_LINK(r1) 590 lbz r10,PACAIRQSOFTMASK(r13) 591 mfspr r11,SPRN_XER /* save XER in stackframe */ 592 std r10,SOFTE(r1) 593 std r11,_XER(r1) 594 li r9,(\vec)+1 595 std r9,_TRAP(r1) /* set trap number */ 596 li r10,0 597 ld r11,exception_marker@toc(r2) 598 std r10,RESULT(r1) /* clear regs->result */ 599 std r11,STACK_FRAME_OVERHEAD-16(r1) /* mark the frame */ 600 601 .if \stack 602 ACCOUNT_STOLEN_TIME 603 .endif 604 605 .if \reconcile 606 RECONCILE_IRQ_STATE(r10, r11) 607 .endif 608.endm 609 610/* 611 * Restore all registers including H/SRR0/1 saved in a stack frame of a 612 * standard exception. 613 */ 614.macro EXCEPTION_RESTORE_REGS hsrr 615 /* Move original SRR0 and SRR1 into the respective regs */ 616 ld r9,_MSR(r1) 617 .if \hsrr == EXC_HV_OR_STD 618 .error "EXC_HV_OR_STD Not implemented for EXCEPTION_RESTORE_REGS" 619 .endif 620 .if \hsrr 621 mtspr SPRN_HSRR1,r9 622 .else 623 mtspr SPRN_SRR1,r9 624 .endif 625 ld r9,_NIP(r1) 626 .if \hsrr 627 mtspr SPRN_HSRR0,r9 628 .else 629 mtspr SPRN_SRR0,r9 630 .endif 631 ld r9,_CTR(r1) 632 mtctr r9 633 ld r9,_XER(r1) 634 mtxer r9 635 ld r9,_LINK(r1) 636 mtlr r9 637 ld r9,_CCR(r1) 638 mtcr r9 639 REST_8GPRS(2, r1) 640 REST_4GPRS(10, r1) 641 REST_GPR(0, r1) 642 /* restore original r1. */ 643 ld r1,GPR1(r1) 644.endm 645 646#define RUNLATCH_ON \ 647BEGIN_FTR_SECTION \ 648 ld r3, PACA_THREAD_INFO(r13); \ 649 ld r4,TI_LOCAL_FLAGS(r3); \ 650 andi. r0,r4,_TLF_RUNLATCH; \ 651 beql ppc64_runlatch_on_trampoline; \ 652END_FTR_SECTION_IFSET(CPU_FTR_CTRL) 653 654/* 655 * When the idle code in power4_idle puts the CPU into NAP mode, 656 * it has to do so in a loop, and relies on the external interrupt 657 * and decrementer interrupt entry code to get it out of the loop. 658 * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags 659 * to signal that it is in the loop and needs help to get out. 660 */ 661#ifdef CONFIG_PPC_970_NAP 662#define FINISH_NAP \ 663BEGIN_FTR_SECTION \ 664 ld r11, PACA_THREAD_INFO(r13); \ 665 ld r9,TI_LOCAL_FLAGS(r11); \ 666 andi. r10,r9,_TLF_NAPPING; \ 667 bnel power4_fixup_nap; \ 668END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) 669#else 670#define FINISH_NAP 671#endif 672 673#define EXC_COMMON(name, realvec, hdlr) \ 674 EXC_COMMON_BEGIN(name); \ 675 INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \ 676 bl save_nvgprs; \ 677 addi r3,r1,STACK_FRAME_OVERHEAD; \ 678 bl hdlr; \ 679 b ret_from_except 680 681/* 682 * Like EXC_COMMON, but for exceptions that can occur in the idle task and 683 * therefore need the special idle handling (finish nap and runlatch) 684 */ 685#define EXC_COMMON_ASYNC(name, realvec, hdlr) \ 686 EXC_COMMON_BEGIN(name); \ 687 INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \ 688 FINISH_NAP; \ 689 RUNLATCH_ON; \ 690 addi r3,r1,STACK_FRAME_OVERHEAD; \ 691 bl hdlr; \ 692 b ret_from_except_lite 693 694 695/* 696 * There are a few constraints to be concerned with. 697 * - Real mode exceptions code/data must be located at their physical location. 698 * - Virtual mode exceptions must be mapped at their 0xc000... location. 699 * - Fixed location code must not call directly beyond the __end_interrupts 700 * area when built with CONFIG_RELOCATABLE. LOAD_HANDLER / bctr sequence 701 * must be used. 702 * - LOAD_HANDLER targets must be within first 64K of physical 0 / 703 * virtual 0xc00... 704 * - Conditional branch targets must be within +/-32K of caller. 705 * 706 * "Virtual exceptions" run with relocation on (MSR_IR=1, MSR_DR=1), and 707 * therefore don't have to run in physically located code or rfid to 708 * virtual mode kernel code. However on relocatable kernels they do have 709 * to branch to KERNELBASE offset because the rest of the kernel (outside 710 * the exception vectors) may be located elsewhere. 711 * 712 * Virtual exceptions correspond with physical, except their entry points 713 * are offset by 0xc000000000000000 and also tend to get an added 0x4000 714 * offset applied. Virtual exceptions are enabled with the Alternate 715 * Interrupt Location (AIL) bit set in the LPCR. However this does not 716 * guarantee they will be delivered virtually. Some conditions (see the ISA) 717 * cause exceptions to be delivered in real mode. 718 * 719 * It's impossible to receive interrupts below 0x300 via AIL. 720 * 721 * KVM: None of the virtual exceptions are from the guest. Anything that 722 * escalated to HV=1 from HV=0 is delivered via real mode handlers. 723 * 724 * 725 * We layout physical memory as follows: 726 * 0x0000 - 0x00ff : Secondary processor spin code 727 * 0x0100 - 0x18ff : Real mode pSeries interrupt vectors 728 * 0x1900 - 0x3fff : Real mode trampolines 729 * 0x4000 - 0x58ff : Relon (IR=1,DR=1) mode pSeries interrupt vectors 730 * 0x5900 - 0x6fff : Relon mode trampolines 731 * 0x7000 - 0x7fff : FWNMI data area 732 * 0x8000 - .... : Common interrupt handlers, remaining early 733 * setup code, rest of kernel. 734 * 735 * We could reclaim 0x4000-0x42ff for real mode trampolines if the space 736 * is necessary. Until then it's more consistent to explicitly put VIRT_NONE 737 * vectors there. 738 */ 739OPEN_FIXED_SECTION(real_vectors, 0x0100, 0x1900) 740OPEN_FIXED_SECTION(real_trampolines, 0x1900, 0x4000) 741OPEN_FIXED_SECTION(virt_vectors, 0x4000, 0x5900) 742OPEN_FIXED_SECTION(virt_trampolines, 0x5900, 0x7000) 743 744#ifdef CONFIG_PPC_POWERNV 745 .globl start_real_trampolines 746 .globl end_real_trampolines 747 .globl start_virt_trampolines 748 .globl end_virt_trampolines 749#endif 750 751#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) 752/* 753 * Data area reserved for FWNMI option. 754 * This address (0x7000) is fixed by the RPA. 755 * pseries and powernv need to keep the whole page from 756 * 0x7000 to 0x8000 free for use by the firmware 757 */ 758ZERO_FIXED_SECTION(fwnmi_page, 0x7000, 0x8000) 759OPEN_TEXT_SECTION(0x8000) 760#else 761OPEN_TEXT_SECTION(0x7000) 762#endif 763 764USE_FIXED_SECTION(real_vectors) 765 766/* 767 * This is the start of the interrupt handlers for pSeries 768 * This code runs with relocation off. 769 * Code from here to __end_interrupts gets copied down to real 770 * address 0x100 when we are running a relocatable kernel. 771 * Therefore any relative branches in this section must only 772 * branch to labels in this section. 773 */ 774 .globl __start_interrupts 775__start_interrupts: 776 777/* No virt vectors corresponding with 0x0..0x100 */ 778EXC_VIRT_NONE(0x4000, 0x100) 779 780 781EXC_REAL_BEGIN(system_reset, 0x100, 0x100) 782#ifdef CONFIG_PPC_P7_NAP 783 /* 784 * If running native on arch 2.06 or later, check if we are waking up 785 * from nap/sleep/winkle, and branch to idle handler. This tests SRR1 786 * bits 46:47. A non-0 value indicates that we are coming from a power 787 * saving state. The idle wakeup handler initially runs in real mode, 788 * but we branch to the 0xc000... address so we can turn on relocation 789 * with mtmsrd later, after SPRs are restored. 790 * 791 * Careful to minimise cost for the fast path (idle wakeup) while 792 * also avoiding clobbering CFAR for the debug path (non-idle). 793 * 794 * For the idle wake case volatile registers can be clobbered, which 795 * is why we use those initially. If it turns out to not be an idle 796 * wake, carefully put everything back the way it was, so we can use 797 * common exception macros to handle it. 798 */ 799BEGIN_FTR_SECTION 800 SET_SCRATCH0(r13) 801 GET_PACA(r13) 802 std r3,PACA_EXNMI+0*8(r13) 803 std r4,PACA_EXNMI+1*8(r13) 804 std r5,PACA_EXNMI+2*8(r13) 805 mfspr r3,SPRN_SRR1 806 mfocrf r4,0x80 807 rlwinm. r5,r3,47-31,30,31 808 bne+ system_reset_idle_wake 809 /* Not powersave wakeup. Restore regs for regular interrupt handler. */ 810 mtocrf 0x80,r4 811 ld r3,PACA_EXNMI+0*8(r13) 812 ld r4,PACA_EXNMI+1*8(r13) 813 ld r5,PACA_EXNMI+2*8(r13) 814 GET_SCRATCH0(r13) 815END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 816#endif 817 818 INT_HANDLER system_reset, 0x100, area=PACA_EXNMI, ri=0, kvm=1 819 /* 820 * MSR_RI is not enabled, because PACA_EXNMI and nmi stack is 821 * being used, so a nested NMI exception would corrupt it. 822 * 823 * In theory, we should not enable relocation here if it was disabled 824 * in SRR1, because the MMU may not be configured to support it (e.g., 825 * SLB may have been cleared). In practice, there should only be a few 826 * small windows where that's the case, and sreset is considered to 827 * be dangerous anyway. 828 */ 829EXC_REAL_END(system_reset, 0x100, 0x100) 830EXC_VIRT_NONE(0x4100, 0x100) 831INT_KVM_HANDLER system_reset 0x100, EXC_STD, PACA_EXNMI, 0 832 833#ifdef CONFIG_PPC_P7_NAP 834TRAMP_REAL_BEGIN(system_reset_idle_wake) 835 /* We are waking up from idle, so may clobber any volatile register */ 836 cmpwi cr1,r5,2 837 bltlr cr1 /* no state loss, return to idle caller with r3=SRR1 */ 838 BRANCH_TO_C000(r12, DOTSYM(idle_return_gpr_loss)) 839#endif 840 841#ifdef CONFIG_PPC_PSERIES 842/* 843 * Vectors for the FWNMI option. Share common code. 844 */ 845TRAMP_REAL_BEGIN(system_reset_fwnmi) 846 /* See comment at system_reset exception, don't turn on RI */ 847 INT_HANDLER system_reset, 0x100, area=PACA_EXNMI, ri=0 848 849#endif /* CONFIG_PPC_PSERIES */ 850 851EXC_COMMON_BEGIN(system_reset_common) 852 /* 853 * Increment paca->in_nmi then enable MSR_RI. SLB or MCE will be able 854 * to recover, but nested NMI will notice in_nmi and not recover 855 * because of the use of the NMI stack. in_nmi reentrancy is tested in 856 * system_reset_exception. 857 */ 858 lhz r10,PACA_IN_NMI(r13) 859 addi r10,r10,1 860 sth r10,PACA_IN_NMI(r13) 861 li r10,MSR_RI 862 mtmsrd r10,1 863 864 mr r10,r1 865 ld r1,PACA_NMI_EMERG_SP(r13) 866 subi r1,r1,INT_FRAME_SIZE 867 INT_COMMON 0x100, PACA_EXNMI, 0, 1, 0, 0, 0 868 bl save_nvgprs 869 /* 870 * Set IRQS_ALL_DISABLED unconditionally so arch_irqs_disabled does 871 * the right thing. We do not want to reconcile because that goes 872 * through irq tracing which we don't want in NMI. 873 * 874 * Save PACAIRQHAPPENED because some code will do a hard disable 875 * (e.g., xmon). So we want to restore this back to where it was 876 * when we return. DAR is unused in the stack, so save it there. 877 */ 878 li r10,IRQS_ALL_DISABLED 879 stb r10,PACAIRQSOFTMASK(r13) 880 lbz r10,PACAIRQHAPPENED(r13) 881 std r10,_DAR(r1) 882 883 addi r3,r1,STACK_FRAME_OVERHEAD 884 bl system_reset_exception 885 886 /* Clear MSR_RI before setting SRR0 and SRR1. */ 887 li r9,0 888 mtmsrd r9,1 889 890 /* 891 * MSR_RI is clear, now we can decrement paca->in_nmi. 892 */ 893 lhz r10,PACA_IN_NMI(r13) 894 subi r10,r10,1 895 sth r10,PACA_IN_NMI(r13) 896 897 /* 898 * Restore soft mask settings. 899 */ 900 ld r10,_DAR(r1) 901 stb r10,PACAIRQHAPPENED(r13) 902 ld r10,SOFTE(r1) 903 stb r10,PACAIRQSOFTMASK(r13) 904 905 EXCEPTION_RESTORE_REGS EXC_STD 906 RFI_TO_USER_OR_KERNEL 907 908 909EXC_REAL_BEGIN(machine_check, 0x200, 0x100) 910 INT_HANDLER machine_check, 0x200, early=1, area=PACA_EXMC, dar=1, dsisr=1 911 /* 912 * MSR_RI is not enabled, because PACA_EXMC is being used, so a 913 * nested machine check corrupts it. machine_check_common enables 914 * MSR_RI. 915 */ 916EXC_REAL_END(machine_check, 0x200, 0x100) 917EXC_VIRT_NONE(0x4200, 0x100) 918 919#ifdef CONFIG_PPC_PSERIES 920TRAMP_REAL_BEGIN(machine_check_fwnmi) 921 /* See comment at machine_check exception, don't turn on RI */ 922 INT_HANDLER machine_check, 0x200, early=1, area=PACA_EXMC, dar=1, dsisr=1 923#endif 924 925INT_KVM_HANDLER machine_check 0x200, EXC_STD, PACA_EXMC, 1 926 927#define MACHINE_CHECK_HANDLER_WINDUP \ 928 /* Clear MSR_RI before setting SRR0 and SRR1. */\ 929 li r9,0; \ 930 mtmsrd r9,1; /* Clear MSR_RI */ \ 931 /* Decrement paca->in_mce now RI is clear. */ \ 932 lhz r12,PACA_IN_MCE(r13); \ 933 subi r12,r12,1; \ 934 sth r12,PACA_IN_MCE(r13); \ 935 EXCEPTION_RESTORE_REGS EXC_STD 936 937EXC_COMMON_BEGIN(machine_check_early_common) 938 mtctr r10 /* Restore ctr */ 939 mfspr r11,SPRN_SRR0 940 mfspr r12,SPRN_SRR1 941 942 /* 943 * Switch to mc_emergency stack and handle re-entrancy (we limit 944 * the nested MCE upto level 4 to avoid stack overflow). 945 * Save MCE registers srr1, srr0, dar and dsisr and then set ME=1 946 * 947 * We use paca->in_mce to check whether this is the first entry or 948 * nested machine check. We increment paca->in_mce to track nested 949 * machine checks. 950 * 951 * If this is the first entry then set stack pointer to 952 * paca->mc_emergency_sp, otherwise r1 is already pointing to 953 * stack frame on mc_emergency stack. 954 * 955 * NOTE: We are here with MSR_ME=0 (off), which means we risk a 956 * checkstop if we get another machine check exception before we do 957 * rfid with MSR_ME=1. 958 * 959 * This interrupt can wake directly from idle. If that is the case, 960 * the machine check is handled then the idle wakeup code is called 961 * to restore state. 962 */ 963 lhz r10,PACA_IN_MCE(r13) 964 cmpwi r10,0 /* Are we in nested machine check */ 965 cmpwi cr1,r10,MAX_MCE_DEPTH /* Are we at maximum nesting */ 966 addi r10,r10,1 /* increment paca->in_mce */ 967 sth r10,PACA_IN_MCE(r13) 968 969 mr r10,r1 /* Save r1 */ 970 bne 1f 971 /* First machine check entry */ 972 ld r1,PACAMCEMERGSP(r13) /* Use MC emergency stack */ 9731: /* Limit nested MCE to level 4 to avoid stack overflow */ 974 bgt cr1,unrecoverable_mce /* Check if we hit limit of 4 */ 975 subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ 976 977 /* We don't touch AMR here, we never go to virtual mode */ 978 INT_COMMON 0x200, PACA_EXMC, 0, 0, 0, 1, 1 979 980BEGIN_FTR_SECTION 981 bl enable_machine_check 982END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) 983 li r10,MSR_RI 984 mtmsrd r10,1 985 986 bl save_nvgprs 987 addi r3,r1,STACK_FRAME_OVERHEAD 988 bl machine_check_early 989 std r3,RESULT(r1) /* Save result */ 990 ld r12,_MSR(r1) 991 992#ifdef CONFIG_PPC_P7_NAP 993 /* 994 * Check if thread was in power saving mode. We come here when any 995 * of the following is true: 996 * a. thread wasn't in power saving mode 997 * b. thread was in power saving mode with no state loss, 998 * supervisor state loss or hypervisor state loss. 999 * 1000 * Go back to nap/sleep/winkle mode again if (b) is true. 1001 */ 1002BEGIN_FTR_SECTION 1003 rlwinm. r11,r12,47-31,30,31 1004 bne machine_check_idle_common 1005END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) 1006#endif 1007 1008#ifdef CONFIG_KVM_BOOK3S_64_HANDLER 1009 /* 1010 * Check if we are coming from guest. If yes, then run the normal 1011 * exception handler which will take the 1012 * machine_check_kvm->kvmppc_interrupt branch to deliver the MC event 1013 * to guest. 1014 */ 1015 lbz r11,HSTATE_IN_GUEST(r13) 1016 cmpwi r11,0 /* Check if coming from guest */ 1017 bne mce_deliver /* continue if we are. */ 1018#endif 1019 1020 /* 1021 * Check if we are coming from userspace. If yes, then run the normal 1022 * exception handler which will deliver the MC event to this kernel. 1023 */ 1024 andi. r11,r12,MSR_PR /* See if coming from user. */ 1025 bne mce_deliver /* continue in V mode if we are. */ 1026 1027 /* 1028 * At this point we are coming from kernel context. 1029 * Queue up the MCE event and return from the interrupt. 1030 * But before that, check if this is an un-recoverable exception. 1031 * If yes, then stay on emergency stack and panic. 1032 */ 1033 andi. r11,r12,MSR_RI 1034 beq unrecoverable_mce 1035 1036 /* 1037 * Check if we have successfully handled/recovered from error, if not 1038 * then stay on emergency stack and panic. 1039 */ 1040 ld r3,RESULT(r1) /* Load result */ 1041 cmpdi r3,0 /* see if we handled MCE successfully */ 1042 beq unrecoverable_mce /* if !handled then panic */ 1043 1044 /* 1045 * Return from MC interrupt. 1046 * Queue up the MCE event so that we can log it later, while 1047 * returning from kernel or opal call. 1048 */ 1049 bl machine_check_queue_event 1050 MACHINE_CHECK_HANDLER_WINDUP 1051 RFI_TO_KERNEL 1052 1053mce_deliver: 1054 /* 1055 * This is a host user or guest MCE. Restore all registers, then 1056 * run the "late" handler. For host user, this will run the 1057 * machine_check_exception handler in virtual mode like a normal 1058 * interrupt handler. For guest, this will trigger the KVM test 1059 * and branch to the KVM interrupt similarly to other interrupts. 1060 */ 1061BEGIN_FTR_SECTION 1062 ld r10,ORIG_GPR3(r1) 1063 mtspr SPRN_CFAR,r10 1064END_FTR_SECTION_IFSET(CPU_FTR_CFAR) 1065 MACHINE_CHECK_HANDLER_WINDUP 1066 /* See comment at machine_check exception, don't turn on RI */ 1067 INT_HANDLER machine_check, 0x200, area=PACA_EXMC, ri=0, dar=1, dsisr=1, kvm=1 1068 1069EXC_COMMON_BEGIN(machine_check_common) 1070 /* 1071 * Machine check is different because we use a different 1072 * save area: PACA_EXMC instead of PACA_EXGEN. 1073 */ 1074 INT_COMMON 0x200, PACA_EXMC, 1, 1, 1, 1, 1 1075 FINISH_NAP 1076 /* Enable MSR_RI when finished with PACA_EXMC */ 1077 li r10,MSR_RI 1078 mtmsrd r10,1 1079 bl save_nvgprs 1080 addi r3,r1,STACK_FRAME_OVERHEAD 1081 bl machine_check_exception 1082 b ret_from_except 1083 1084#ifdef CONFIG_PPC_P7_NAP 1085/* 1086 * This is an idle wakeup. Low level machine check has already been 1087 * done. Queue the event then call the idle code to do the wake up. 1088 */ 1089EXC_COMMON_BEGIN(machine_check_idle_common) 1090 bl machine_check_queue_event 1091 1092 /* 1093 * We have not used any non-volatile GPRs here, and as a rule 1094 * most exception code including machine check does not. 1095 * Therefore PACA_NAPSTATELOST does not need to be set. Idle 1096 * wakeup will restore volatile registers. 1097 * 1098 * Load the original SRR1 into r3 for pnv_powersave_wakeup_mce. 1099 * 1100 * Then decrement MCE nesting after finishing with the stack. 1101 */ 1102 ld r3,_MSR(r1) 1103 ld r4,_LINK(r1) 1104 1105 lhz r11,PACA_IN_MCE(r13) 1106 subi r11,r11,1 1107 sth r11,PACA_IN_MCE(r13) 1108 1109 mtlr r4 1110 rlwinm r10,r3,47-31,30,31 1111 cmpwi cr1,r10,2 1112 bltlr cr1 /* no state loss, return to idle caller */ 1113 b idle_return_gpr_loss 1114#endif 1115 1116EXC_COMMON_BEGIN(unrecoverable_mce) 1117 /* 1118 * We are going down. But there are chances that we might get hit by 1119 * another MCE during panic path and we may run into unstable state 1120 * with no way out. Hence, turn ME bit off while going down, so that 1121 * when another MCE is hit during panic path, system will checkstop 1122 * and hypervisor will get restarted cleanly by SP. 1123 */ 1124BEGIN_FTR_SECTION 1125 li r10,0 /* clear MSR_RI */ 1126 mtmsrd r10,1 1127 bl disable_machine_check 1128END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) 1129 ld r10,PACAKMSR(r13) 1130 li r3,MSR_ME 1131 andc r10,r10,r3 1132 mtmsrd r10 1133 1134 /* Invoke machine_check_exception to print MCE event and panic. */ 1135 addi r3,r1,STACK_FRAME_OVERHEAD 1136 bl machine_check_exception 1137 1138 /* 1139 * We will not reach here. Even if we did, there is no way out. 1140 * Call unrecoverable_exception and die. 1141 */ 1142 addi r3,r1,STACK_FRAME_OVERHEAD 1143 bl unrecoverable_exception 1144 b . 1145 1146 1147EXC_REAL_BEGIN(data_access, 0x300, 0x80) 1148 INT_HANDLER data_access, 0x300, ool=1, dar=1, dsisr=1, kvm=1 1149EXC_REAL_END(data_access, 0x300, 0x80) 1150EXC_VIRT_BEGIN(data_access, 0x4300, 0x80) 1151 INT_HANDLER data_access, 0x300, virt=1, dar=1, dsisr=1 1152EXC_VIRT_END(data_access, 0x4300, 0x80) 1153INT_KVM_HANDLER data_access, 0x300, EXC_STD, PACA_EXGEN, 1 1154EXC_COMMON_BEGIN(data_access_common) 1155 /* 1156 * Here r13 points to the paca, r9 contains the saved CR, 1157 * SRR0 and SRR1 are saved in r11 and r12, 1158 * r9 - r13 are saved in paca->exgen. 1159 * EX_DAR and EX_DSISR have saved DAR/DSISR 1160 */ 1161 INT_COMMON 0x300, PACA_EXGEN, 1, 1, 1, 1, 1 1162 ld r4,_DAR(r1) 1163 ld r5,_DSISR(r1) 1164BEGIN_MMU_FTR_SECTION 1165 ld r6,_MSR(r1) 1166 li r3,0x300 1167 b do_hash_page /* Try to handle as hpte fault */ 1168MMU_FTR_SECTION_ELSE 1169 b handle_page_fault 1170ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) 1171 1172 1173EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80) 1174 INT_HANDLER data_access_slb, 0x380, ool=1, area=PACA_EXSLB, dar=1, kvm=1 1175EXC_REAL_END(data_access_slb, 0x380, 0x80) 1176EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80) 1177 INT_HANDLER data_access_slb, 0x380, virt=1, area=PACA_EXSLB, dar=1 1178EXC_VIRT_END(data_access_slb, 0x4380, 0x80) 1179INT_KVM_HANDLER data_access_slb, 0x380, EXC_STD, PACA_EXSLB, 1 1180EXC_COMMON_BEGIN(data_access_slb_common) 1181 INT_COMMON 0x380, PACA_EXSLB, 1, 1, 0, 1, 0 1182 ld r4,_DAR(r1) 1183 addi r3,r1,STACK_FRAME_OVERHEAD 1184BEGIN_MMU_FTR_SECTION 1185 /* HPT case, do SLB fault */ 1186 bl do_slb_fault 1187 cmpdi r3,0 1188 bne- 1f 1189 b fast_exception_return 11901: /* Error case */ 1191MMU_FTR_SECTION_ELSE 1192 /* Radix case, access is outside page table range */ 1193 li r3,-EFAULT 1194ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) 1195 std r3,RESULT(r1) 1196 bl save_nvgprs 1197 RECONCILE_IRQ_STATE(r10, r11) 1198 ld r4,_DAR(r1) 1199 ld r5,RESULT(r1) 1200 addi r3,r1,STACK_FRAME_OVERHEAD 1201 bl do_bad_slb_fault 1202 b ret_from_except 1203 1204 1205EXC_REAL_BEGIN(instruction_access, 0x400, 0x80) 1206 INT_HANDLER instruction_access, 0x400, kvm=1 1207EXC_REAL_END(instruction_access, 0x400, 0x80) 1208EXC_VIRT_BEGIN(instruction_access, 0x4400, 0x80) 1209 INT_HANDLER instruction_access, 0x400, virt=1 1210EXC_VIRT_END(instruction_access, 0x4400, 0x80) 1211INT_KVM_HANDLER instruction_access, 0x400, EXC_STD, PACA_EXGEN, 0 1212EXC_COMMON_BEGIN(instruction_access_common) 1213 INT_COMMON 0x400, PACA_EXGEN, 1, 1, 1, 2, 2 1214 ld r4,_DAR(r1) 1215 ld r5,_DSISR(r1) 1216BEGIN_MMU_FTR_SECTION 1217 ld r6,_MSR(r1) 1218 li r3,0x400 1219 b do_hash_page /* Try to handle as hpte fault */ 1220MMU_FTR_SECTION_ELSE 1221 b handle_page_fault 1222ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) 1223 1224 1225EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80) 1226 INT_HANDLER instruction_access_slb, 0x480, area=PACA_EXSLB, kvm=1 1227EXC_REAL_END(instruction_access_slb, 0x480, 0x80) 1228EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80) 1229 INT_HANDLER instruction_access_slb, 0x480, virt=1, area=PACA_EXSLB 1230EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80) 1231INT_KVM_HANDLER instruction_access_slb, 0x480, EXC_STD, PACA_EXSLB, 0 1232EXC_COMMON_BEGIN(instruction_access_slb_common) 1233 INT_COMMON 0x480, PACA_EXSLB, 1, 1, 0, 2, 0 1234 ld r4,_DAR(r1) 1235 addi r3,r1,STACK_FRAME_OVERHEAD 1236BEGIN_MMU_FTR_SECTION 1237 /* HPT case, do SLB fault */ 1238 bl do_slb_fault 1239 cmpdi r3,0 1240 bne- 1f 1241 b fast_exception_return 12421: /* Error case */ 1243MMU_FTR_SECTION_ELSE 1244 /* Radix case, access is outside page table range */ 1245 li r3,-EFAULT 1246ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) 1247 std r3,RESULT(r1) 1248 bl save_nvgprs 1249 RECONCILE_IRQ_STATE(r10, r11) 1250 ld r4,_DAR(r1) 1251 ld r5,RESULT(r1) 1252 addi r3,r1,STACK_FRAME_OVERHEAD 1253 bl do_bad_slb_fault 1254 b ret_from_except 1255 1256EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x100) 1257 INT_HANDLER hardware_interrupt, 0x500, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1 1258EXC_REAL_END(hardware_interrupt, 0x500, 0x100) 1259EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100) 1260 INT_HANDLER hardware_interrupt, 0x500, virt=1, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1 1261EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100) 1262INT_KVM_HANDLER hardware_interrupt, 0x500, EXC_HV_OR_STD, PACA_EXGEN, 0 1263EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ) 1264 1265 1266EXC_REAL_BEGIN(alignment, 0x600, 0x100) 1267 INT_HANDLER alignment, 0x600, dar=1, dsisr=1, kvm=1 1268EXC_REAL_END(alignment, 0x600, 0x100) 1269EXC_VIRT_BEGIN(alignment, 0x4600, 0x100) 1270 INT_HANDLER alignment, 0x600, virt=1, dar=1, dsisr=1 1271EXC_VIRT_END(alignment, 0x4600, 0x100) 1272INT_KVM_HANDLER alignment, 0x600, EXC_STD, PACA_EXGEN, 0 1273EXC_COMMON_BEGIN(alignment_common) 1274 INT_COMMON 0x600, PACA_EXGEN, 1, 1, 1, 1, 1 1275 bl save_nvgprs 1276 addi r3,r1,STACK_FRAME_OVERHEAD 1277 bl alignment_exception 1278 b ret_from_except 1279 1280 1281EXC_REAL_BEGIN(program_check, 0x700, 0x100) 1282 INT_HANDLER program_check, 0x700, kvm=1 1283EXC_REAL_END(program_check, 0x700, 0x100) 1284EXC_VIRT_BEGIN(program_check, 0x4700, 0x100) 1285 INT_HANDLER program_check, 0x700, virt=1 1286EXC_VIRT_END(program_check, 0x4700, 0x100) 1287INT_KVM_HANDLER program_check, 0x700, EXC_STD, PACA_EXGEN, 0 1288EXC_COMMON_BEGIN(program_check_common) 1289 /* 1290 * It's possible to receive a TM Bad Thing type program check with 1291 * userspace register values (in particular r1), but with SRR1 reporting 1292 * that we came from the kernel. Normally that would confuse the bad 1293 * stack logic, and we would report a bad kernel stack pointer. Instead 1294 * we switch to the emergency stack if we're taking a TM Bad Thing from 1295 * the kernel. 1296 */ 1297 1298 andi. r10,r12,MSR_PR 1299 bne 2f /* If userspace, go normal path */ 1300 1301 andis. r10,r12,(SRR1_PROGTM)@h 1302 bne 1f /* If TM, emergency */ 1303 1304 cmpdi r1,-INT_FRAME_SIZE /* check if r1 is in userspace */ 1305 blt 2f /* normal path if not */ 1306 1307 /* Use the emergency stack */ 13081: andi. r10,r12,MSR_PR /* Set CR0 correctly for label */ 1309 /* 3 in EXCEPTION_PROLOG_COMMON */ 1310 mr r10,r1 /* Save r1 */ 1311 ld r1,PACAEMERGSP(r13) /* Use emergency stack */ 1312 subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ 1313 INT_COMMON 0x700, PACA_EXGEN, 0, 1, 1, 0, 0 1314 b 3f 13152: 1316 INT_COMMON 0x700, PACA_EXGEN, 1, 1, 1, 0, 0 13173: 1318 bl save_nvgprs 1319 addi r3,r1,STACK_FRAME_OVERHEAD 1320 bl program_check_exception 1321 b ret_from_except 1322 1323 1324EXC_REAL_BEGIN(fp_unavailable, 0x800, 0x100) 1325 INT_HANDLER fp_unavailable, 0x800, kvm=1 1326EXC_REAL_END(fp_unavailable, 0x800, 0x100) 1327EXC_VIRT_BEGIN(fp_unavailable, 0x4800, 0x100) 1328 INT_HANDLER fp_unavailable, 0x800, virt=1 1329EXC_VIRT_END(fp_unavailable, 0x4800, 0x100) 1330INT_KVM_HANDLER fp_unavailable, 0x800, EXC_STD, PACA_EXGEN, 0 1331EXC_COMMON_BEGIN(fp_unavailable_common) 1332 INT_COMMON 0x800, PACA_EXGEN, 1, 1, 0, 0, 0 1333 bne 1f /* if from user, just load it up */ 1334 bl save_nvgprs 1335 RECONCILE_IRQ_STATE(r10, r11) 1336 addi r3,r1,STACK_FRAME_OVERHEAD 1337 bl kernel_fp_unavailable_exception 13380: trap 1339 EMIT_BUG_ENTRY 0b, __FILE__, __LINE__, 0 13401: 1341#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 1342BEGIN_FTR_SECTION 1343 /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in 1344 * transaction), go do TM stuff 1345 */ 1346 rldicl. r0, r12, (64-MSR_TS_LG), (64-2) 1347 bne- 2f 1348END_FTR_SECTION_IFSET(CPU_FTR_TM) 1349#endif 1350 bl load_up_fpu 1351 b fast_exception_return 1352#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 13532: /* User process was in a transaction */ 1354 bl save_nvgprs 1355 RECONCILE_IRQ_STATE(r10, r11) 1356 addi r3,r1,STACK_FRAME_OVERHEAD 1357 bl fp_unavailable_tm 1358 b ret_from_except 1359#endif 1360 1361 1362EXC_REAL_BEGIN(decrementer, 0x900, 0x80) 1363 INT_HANDLER decrementer, 0x900, ool=1, bitmask=IRQS_DISABLED, kvm=1 1364EXC_REAL_END(decrementer, 0x900, 0x80) 1365EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80) 1366 INT_HANDLER decrementer, 0x900, virt=1, bitmask=IRQS_DISABLED 1367EXC_VIRT_END(decrementer, 0x4900, 0x80) 1368INT_KVM_HANDLER decrementer, 0x900, EXC_STD, PACA_EXGEN, 0 1369EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt) 1370 1371 1372EXC_REAL_BEGIN(hdecrementer, 0x980, 0x80) 1373 INT_HANDLER hdecrementer, 0x980, hsrr=EXC_HV, kvm=1 1374EXC_REAL_END(hdecrementer, 0x980, 0x80) 1375EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80) 1376 INT_HANDLER hdecrementer, 0x980, virt=1, hsrr=EXC_HV, kvm=1 1377EXC_VIRT_END(hdecrementer, 0x4980, 0x80) 1378INT_KVM_HANDLER hdecrementer, 0x980, EXC_HV, PACA_EXGEN, 0 1379EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt) 1380 1381 1382EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100) 1383 INT_HANDLER doorbell_super, 0xa00, bitmask=IRQS_DISABLED, kvm=1 1384EXC_REAL_END(doorbell_super, 0xa00, 0x100) 1385EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100) 1386 INT_HANDLER doorbell_super, 0xa00, virt=1, bitmask=IRQS_DISABLED 1387EXC_VIRT_END(doorbell_super, 0x4a00, 0x100) 1388INT_KVM_HANDLER doorbell_super, 0xa00, EXC_STD, PACA_EXGEN, 0 1389#ifdef CONFIG_PPC_DOORBELL 1390EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, doorbell_exception) 1391#else 1392EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, unknown_exception) 1393#endif 1394 1395 1396EXC_REAL_NONE(0xb00, 0x100) 1397EXC_VIRT_NONE(0x4b00, 0x100) 1398 1399/* 1400 * system call / hypercall (0xc00, 0x4c00) 1401 * 1402 * The system call exception is invoked with "sc 0" and does not alter HV bit. 1403 * 1404 * The hypercall is invoked with "sc 1" and sets HV=1. 1405 * 1406 * In HPT, sc 1 always goes to 0xc00 real mode. In RADIX, sc 1 can go to 1407 * 0x4c00 virtual mode. 1408 * 1409 * Call convention: 1410 * 1411 * syscall and hypercalls register conventions are documented in 1412 * Documentation/powerpc/syscall64-abi.rst and 1413 * Documentation/powerpc/papr_hcalls.rst respectively. 1414 * 1415 * The intersection of volatile registers that don't contain possible 1416 * inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry 1417 * without saving, though xer is not a good idea to use, as hardware may 1418 * interpret some bits so it may be costly to change them. 1419 */ 1420.macro SYSTEM_CALL virt 1421#ifdef CONFIG_KVM_BOOK3S_64_HANDLER 1422 /* 1423 * There is a little bit of juggling to get syscall and hcall 1424 * working well. Save r13 in ctr to avoid using SPRG scratch 1425 * register. 1426 * 1427 * Userspace syscalls have already saved the PPR, hcalls must save 1428 * it before setting HMT_MEDIUM. 1429 */ 1430 mtctr r13 1431 GET_PACA(r13) 1432 std r10,PACA_EXGEN+EX_R10(r13) 1433 INTERRUPT_TO_KERNEL 1434 KVMTEST system_call EXC_STD 0xc00 /* uses r10, branch to system_call_kvm */ 1435 mfctr r9 1436#else 1437 mr r9,r13 1438 GET_PACA(r13) 1439 INTERRUPT_TO_KERNEL 1440#endif 1441 1442#ifdef CONFIG_PPC_FAST_ENDIAN_SWITCH 1443BEGIN_FTR_SECTION 1444 cmpdi r0,0x1ebe 1445 beq- 1f 1446END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) 1447#endif 1448 1449 /* We reach here with PACA in r13, r13 in r9. */ 1450 mfspr r11,SPRN_SRR0 1451 mfspr r12,SPRN_SRR1 1452 1453 HMT_MEDIUM 1454 1455 .if ! \virt 1456 __LOAD_HANDLER(r10, system_call_common) 1457 mtspr SPRN_SRR0,r10 1458 ld r10,PACAKMSR(r13) 1459 mtspr SPRN_SRR1,r10 1460 RFI_TO_KERNEL 1461 b . /* prevent speculative execution */ 1462 .else 1463 li r10,MSR_RI 1464 mtmsrd r10,1 /* Set RI (EE=0) */ 1465#ifdef CONFIG_RELOCATABLE 1466 __LOAD_HANDLER(r10, system_call_common) 1467 mtctr r10 1468 bctr 1469#else 1470 b system_call_common 1471#endif 1472 .endif 1473 1474#ifdef CONFIG_PPC_FAST_ENDIAN_SWITCH 1475 /* Fast LE/BE switch system call */ 14761: mfspr r12,SPRN_SRR1 1477 xori r12,r12,MSR_LE 1478 mtspr SPRN_SRR1,r12 1479 mr r13,r9 1480 RFI_TO_USER /* return to userspace */ 1481 b . /* prevent speculative execution */ 1482#endif 1483.endm 1484 1485EXC_REAL_BEGIN(system_call, 0xc00, 0x100) 1486 SYSTEM_CALL 0 1487EXC_REAL_END(system_call, 0xc00, 0x100) 1488EXC_VIRT_BEGIN(system_call, 0x4c00, 0x100) 1489 SYSTEM_CALL 1 1490EXC_VIRT_END(system_call, 0x4c00, 0x100) 1491 1492#ifdef CONFIG_KVM_BOOK3S_64_HANDLER 1493 /* 1494 * This is a hcall, so register convention is as above, with these 1495 * differences: 1496 * r13 = PACA 1497 * ctr = orig r13 1498 * orig r10 saved in PACA 1499 */ 1500TRAMP_KVM_BEGIN(system_call_kvm) 1501 /* 1502 * Save the PPR (on systems that support it) before changing to 1503 * HMT_MEDIUM. That allows the KVM code to save that value into the 1504 * guest state (it is the guest's PPR value). 1505 */ 1506 OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR) 1507 HMT_MEDIUM 1508 OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR) 1509 mfctr r10 1510 SET_SCRATCH0(r10) 1511 std r9,PACA_EXGEN+EX_R9(r13) 1512 mfcr r9 1513 KVM_HANDLER 0xc00, EXC_STD, PACA_EXGEN, 0 1514#endif 1515 1516 1517EXC_REAL_BEGIN(single_step, 0xd00, 0x100) 1518 INT_HANDLER single_step, 0xd00, kvm=1 1519EXC_REAL_END(single_step, 0xd00, 0x100) 1520EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100) 1521 INT_HANDLER single_step, 0xd00, virt=1 1522EXC_VIRT_END(single_step, 0x4d00, 0x100) 1523INT_KVM_HANDLER single_step, 0xd00, EXC_STD, PACA_EXGEN, 0 1524EXC_COMMON(single_step_common, 0xd00, single_step_exception) 1525 1526 1527EXC_REAL_BEGIN(h_data_storage, 0xe00, 0x20) 1528 INT_HANDLER h_data_storage, 0xe00, ool=1, hsrr=EXC_HV, dar=1, dsisr=1, kvm=1 1529EXC_REAL_END(h_data_storage, 0xe00, 0x20) 1530EXC_VIRT_BEGIN(h_data_storage, 0x4e00, 0x20) 1531 INT_HANDLER h_data_storage, 0xe00, ool=1, virt=1, hsrr=EXC_HV, dar=1, dsisr=1, kvm=1 1532EXC_VIRT_END(h_data_storage, 0x4e00, 0x20) 1533INT_KVM_HANDLER h_data_storage, 0xe00, EXC_HV, PACA_EXGEN, 1 1534EXC_COMMON_BEGIN(h_data_storage_common) 1535 INT_COMMON 0xe00, PACA_EXGEN, 1, 1, 1, 1, 1 1536 bl save_nvgprs 1537 addi r3,r1,STACK_FRAME_OVERHEAD 1538BEGIN_MMU_FTR_SECTION 1539 ld r4,_DAR(r1) 1540 li r5,SIGSEGV 1541 bl bad_page_fault 1542MMU_FTR_SECTION_ELSE 1543 bl unknown_exception 1544ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX) 1545 b ret_from_except 1546 1547 1548EXC_REAL_BEGIN(h_instr_storage, 0xe20, 0x20) 1549 INT_HANDLER h_instr_storage, 0xe20, ool=1, hsrr=EXC_HV, kvm=1 1550EXC_REAL_END(h_instr_storage, 0xe20, 0x20) 1551EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20) 1552 INT_HANDLER h_instr_storage, 0xe20, ool=1, virt=1, hsrr=EXC_HV, kvm=1 1553EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20) 1554INT_KVM_HANDLER h_instr_storage, 0xe20, EXC_HV, PACA_EXGEN, 0 1555EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception) 1556 1557 1558EXC_REAL_BEGIN(emulation_assist, 0xe40, 0x20) 1559 INT_HANDLER emulation_assist, 0xe40, ool=1, hsrr=EXC_HV, kvm=1 1560EXC_REAL_END(emulation_assist, 0xe40, 0x20) 1561EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20) 1562 INT_HANDLER emulation_assist, 0xe40, ool=1, virt=1, hsrr=EXC_HV, kvm=1 1563EXC_VIRT_END(emulation_assist, 0x4e40, 0x20) 1564INT_KVM_HANDLER emulation_assist, 0xe40, EXC_HV, PACA_EXGEN, 0 1565EXC_COMMON(emulation_assist_common, 0xe40, emulation_assist_interrupt) 1566 1567 1568/* 1569 * hmi_exception trampoline is a special case. It jumps to hmi_exception_early 1570 * first, and then eventaully from there to the trampoline to get into virtual 1571 * mode. 1572 */ 1573EXC_REAL_BEGIN(hmi_exception, 0xe60, 0x20) 1574 INT_HANDLER hmi_exception, 0xe60, ool=1, early=1, hsrr=EXC_HV, ri=0, kvm=1 1575EXC_REAL_END(hmi_exception, 0xe60, 0x20) 1576EXC_VIRT_NONE(0x4e60, 0x20) 1577INT_KVM_HANDLER hmi_exception, 0xe60, EXC_HV, PACA_EXGEN, 0 1578EXC_COMMON_BEGIN(hmi_exception_early_common) 1579 mtctr r10 /* Restore ctr */ 1580 mfspr r11,SPRN_HSRR0 /* Save HSRR0 */ 1581 mfspr r12,SPRN_HSRR1 /* Save HSRR1 */ 1582 mr r10,r1 /* Save r1 */ 1583 ld r1,PACAEMERGSP(r13) /* Use emergency stack for realmode */ 1584 subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ 1585 1586 /* We don't touch AMR here, we never go to virtual mode */ 1587 INT_COMMON 0xe60, PACA_EXGEN, 0, 0, 0, 0, 0 1588 1589 addi r3,r1,STACK_FRAME_OVERHEAD 1590 bl hmi_exception_realmode 1591 cmpdi cr0,r3,0 1592 bne 1f 1593 1594 EXCEPTION_RESTORE_REGS EXC_HV 1595 HRFI_TO_USER_OR_KERNEL 1596 15971: 1598 /* 1599 * Go to virtual mode and pull the HMI event information from 1600 * firmware. 1601 */ 1602 EXCEPTION_RESTORE_REGS EXC_HV 1603 INT_HANDLER hmi_exception, 0xe60, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 1604 1605EXC_COMMON_BEGIN(hmi_exception_common) 1606 INT_COMMON 0xe60, PACA_EXGEN, 1, 1, 1, 0, 0 1607 FINISH_NAP 1608 RUNLATCH_ON 1609 bl save_nvgprs 1610 addi r3,r1,STACK_FRAME_OVERHEAD 1611 bl handle_hmi_exception 1612 b ret_from_except 1613 1614 1615EXC_REAL_BEGIN(h_doorbell, 0xe80, 0x20) 1616 INT_HANDLER h_doorbell, 0xe80, ool=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 1617EXC_REAL_END(h_doorbell, 0xe80, 0x20) 1618EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20) 1619 INT_HANDLER h_doorbell, 0xe80, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 1620EXC_VIRT_END(h_doorbell, 0x4e80, 0x20) 1621INT_KVM_HANDLER h_doorbell, 0xe80, EXC_HV, PACA_EXGEN, 0 1622#ifdef CONFIG_PPC_DOORBELL 1623EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, doorbell_exception) 1624#else 1625EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, unknown_exception) 1626#endif 1627 1628 1629EXC_REAL_BEGIN(h_virt_irq, 0xea0, 0x20) 1630 INT_HANDLER h_virt_irq, 0xea0, ool=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 1631EXC_REAL_END(h_virt_irq, 0xea0, 0x20) 1632EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20) 1633 INT_HANDLER h_virt_irq, 0xea0, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1 1634EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20) 1635INT_KVM_HANDLER h_virt_irq, 0xea0, EXC_HV, PACA_EXGEN, 0 1636EXC_COMMON_ASYNC(h_virt_irq_common, 0xea0, do_IRQ) 1637 1638 1639EXC_REAL_NONE(0xec0, 0x20) 1640EXC_VIRT_NONE(0x4ec0, 0x20) 1641EXC_REAL_NONE(0xee0, 0x20) 1642EXC_VIRT_NONE(0x4ee0, 0x20) 1643 1644 1645EXC_REAL_BEGIN(performance_monitor, 0xf00, 0x20) 1646 INT_HANDLER performance_monitor, 0xf00, ool=1, bitmask=IRQS_PMI_DISABLED, kvm=1 1647EXC_REAL_END(performance_monitor, 0xf00, 0x20) 1648EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20) 1649 INT_HANDLER performance_monitor, 0xf00, ool=1, virt=1, bitmask=IRQS_PMI_DISABLED 1650EXC_VIRT_END(performance_monitor, 0x4f00, 0x20) 1651INT_KVM_HANDLER performance_monitor, 0xf00, EXC_STD, PACA_EXGEN, 0 1652EXC_COMMON_ASYNC(performance_monitor_common, 0xf00, performance_monitor_exception) 1653 1654 1655EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20) 1656 INT_HANDLER altivec_unavailable, 0xf20, ool=1, kvm=1 1657EXC_REAL_END(altivec_unavailable, 0xf20, 0x20) 1658EXC_VIRT_BEGIN(altivec_unavailable, 0x4f20, 0x20) 1659 INT_HANDLER altivec_unavailable, 0xf20, ool=1, virt=1 1660EXC_VIRT_END(altivec_unavailable, 0x4f20, 0x20) 1661INT_KVM_HANDLER altivec_unavailable, 0xf20, EXC_STD, PACA_EXGEN, 0 1662EXC_COMMON_BEGIN(altivec_unavailable_common) 1663 INT_COMMON 0xf20, PACA_EXGEN, 1, 1, 0, 0, 0 1664#ifdef CONFIG_ALTIVEC 1665BEGIN_FTR_SECTION 1666 beq 1f 1667#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 1668 BEGIN_FTR_SECTION_NESTED(69) 1669 /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in 1670 * transaction), go do TM stuff 1671 */ 1672 rldicl. r0, r12, (64-MSR_TS_LG), (64-2) 1673 bne- 2f 1674 END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) 1675#endif 1676 bl load_up_altivec 1677 b fast_exception_return 1678#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 16792: /* User process was in a transaction */ 1680 bl save_nvgprs 1681 RECONCILE_IRQ_STATE(r10, r11) 1682 addi r3,r1,STACK_FRAME_OVERHEAD 1683 bl altivec_unavailable_tm 1684 b ret_from_except 1685#endif 16861: 1687END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) 1688#endif 1689 bl save_nvgprs 1690 RECONCILE_IRQ_STATE(r10, r11) 1691 addi r3,r1,STACK_FRAME_OVERHEAD 1692 bl altivec_unavailable_exception 1693 b ret_from_except 1694 1695 1696EXC_REAL_BEGIN(vsx_unavailable, 0xf40, 0x20) 1697 INT_HANDLER vsx_unavailable, 0xf40, ool=1, kvm=1 1698EXC_REAL_END(vsx_unavailable, 0xf40, 0x20) 1699EXC_VIRT_BEGIN(vsx_unavailable, 0x4f40, 0x20) 1700 INT_HANDLER vsx_unavailable, 0xf40, ool=1, virt=1 1701EXC_VIRT_END(vsx_unavailable, 0x4f40, 0x20) 1702INT_KVM_HANDLER vsx_unavailable, 0xf40, EXC_STD, PACA_EXGEN, 0 1703EXC_COMMON_BEGIN(vsx_unavailable_common) 1704 INT_COMMON 0xf40, PACA_EXGEN, 1, 1, 0, 0, 0 1705#ifdef CONFIG_VSX 1706BEGIN_FTR_SECTION 1707 beq 1f 1708#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 1709 BEGIN_FTR_SECTION_NESTED(69) 1710 /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in 1711 * transaction), go do TM stuff 1712 */ 1713 rldicl. r0, r12, (64-MSR_TS_LG), (64-2) 1714 bne- 2f 1715 END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) 1716#endif 1717 b load_up_vsx 1718#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 17192: /* User process was in a transaction */ 1720 bl save_nvgprs 1721 RECONCILE_IRQ_STATE(r10, r11) 1722 addi r3,r1,STACK_FRAME_OVERHEAD 1723 bl vsx_unavailable_tm 1724 b ret_from_except 1725#endif 17261: 1727END_FTR_SECTION_IFSET(CPU_FTR_VSX) 1728#endif 1729 bl save_nvgprs 1730 RECONCILE_IRQ_STATE(r10, r11) 1731 addi r3,r1,STACK_FRAME_OVERHEAD 1732 bl vsx_unavailable_exception 1733 b ret_from_except 1734 1735 1736EXC_REAL_BEGIN(facility_unavailable, 0xf60, 0x20) 1737 INT_HANDLER facility_unavailable, 0xf60, ool=1, kvm=1 1738EXC_REAL_END(facility_unavailable, 0xf60, 0x20) 1739EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20) 1740 INT_HANDLER facility_unavailable, 0xf60, ool=1, virt=1 1741EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20) 1742INT_KVM_HANDLER facility_unavailable, 0xf60, EXC_STD, PACA_EXGEN, 0 1743EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception) 1744 1745 1746EXC_REAL_BEGIN(h_facility_unavailable, 0xf80, 0x20) 1747 INT_HANDLER h_facility_unavailable, 0xf80, ool=1, hsrr=EXC_HV, kvm=1 1748EXC_REAL_END(h_facility_unavailable, 0xf80, 0x20) 1749EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20) 1750 INT_HANDLER h_facility_unavailable, 0xf80, ool=1, virt=1, hsrr=EXC_HV, kvm=1 1751EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20) 1752INT_KVM_HANDLER h_facility_unavailable, 0xf80, EXC_HV, PACA_EXGEN, 0 1753EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception) 1754 1755 1756EXC_REAL_NONE(0xfa0, 0x20) 1757EXC_VIRT_NONE(0x4fa0, 0x20) 1758EXC_REAL_NONE(0xfc0, 0x20) 1759EXC_VIRT_NONE(0x4fc0, 0x20) 1760EXC_REAL_NONE(0xfe0, 0x20) 1761EXC_VIRT_NONE(0x4fe0, 0x20) 1762 1763EXC_REAL_NONE(0x1000, 0x100) 1764EXC_VIRT_NONE(0x5000, 0x100) 1765EXC_REAL_NONE(0x1100, 0x100) 1766EXC_VIRT_NONE(0x5100, 0x100) 1767 1768#ifdef CONFIG_CBE_RAS 1769EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100) 1770 INT_HANDLER cbe_system_error, 0x1200, ool=1, hsrr=EXC_HV, kvm=1 1771EXC_REAL_END(cbe_system_error, 0x1200, 0x100) 1772EXC_VIRT_NONE(0x5200, 0x100) 1773INT_KVM_HANDLER cbe_system_error, 0x1200, EXC_HV, PACA_EXGEN, 1 1774EXC_COMMON(cbe_system_error_common, 0x1200, cbe_system_error_exception) 1775#else /* CONFIG_CBE_RAS */ 1776EXC_REAL_NONE(0x1200, 0x100) 1777EXC_VIRT_NONE(0x5200, 0x100) 1778#endif 1779 1780 1781EXC_REAL_BEGIN(instruction_breakpoint, 0x1300, 0x100) 1782 INT_HANDLER instruction_breakpoint, 0x1300, kvm=1 1783EXC_REAL_END(instruction_breakpoint, 0x1300, 0x100) 1784EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100) 1785 INT_HANDLER instruction_breakpoint, 0x1300, virt=1 1786EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100) 1787INT_KVM_HANDLER instruction_breakpoint, 0x1300, EXC_STD, PACA_EXGEN, 1 1788EXC_COMMON(instruction_breakpoint_common, 0x1300, instruction_breakpoint_exception) 1789 1790 1791EXC_REAL_NONE(0x1400, 0x100) 1792EXC_VIRT_NONE(0x5400, 0x100) 1793 1794EXC_REAL_BEGIN(denorm_exception_hv, 0x1500, 0x100) 1795 INT_HANDLER denorm_exception_hv, 0x1500, early=2, hsrr=EXC_HV 1796#ifdef CONFIG_PPC_DENORMALISATION 1797 mfspr r10,SPRN_HSRR1 1798 andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ 1799 bne+ denorm_assist 1800#endif 1801 KVMTEST denorm_exception_hv, EXC_HV 0x1500 1802 INT_SAVE_SRR_AND_JUMP denorm_common, EXC_HV, 1 1803EXC_REAL_END(denorm_exception_hv, 0x1500, 0x100) 1804 1805#ifdef CONFIG_PPC_DENORMALISATION 1806EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100) 1807 INT_HANDLER denorm_exception, 0x1500, 0, 2, 1, EXC_HV, PACA_EXGEN, 1, 0, 0, 0, 0 1808 mfspr r10,SPRN_HSRR1 1809 andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ 1810 bne+ denorm_assist 1811 INT_VIRT_SAVE_SRR_AND_JUMP denorm_common, EXC_HV 1812EXC_VIRT_END(denorm_exception, 0x5500, 0x100) 1813#else 1814EXC_VIRT_NONE(0x5500, 0x100) 1815#endif 1816 1817INT_KVM_HANDLER denorm_exception_hv, 0x1500, EXC_HV, PACA_EXGEN, 0 1818 1819#ifdef CONFIG_PPC_DENORMALISATION 1820TRAMP_REAL_BEGIN(denorm_assist) 1821BEGIN_FTR_SECTION 1822/* 1823 * To denormalise we need to move a copy of the register to itself. 1824 * For POWER6 do that here for all FP regs. 1825 */ 1826 mfmsr r10 1827 ori r10,r10,(MSR_FP|MSR_FE0|MSR_FE1) 1828 xori r10,r10,(MSR_FE0|MSR_FE1) 1829 mtmsrd r10 1830 sync 1831 1832 .Lreg=0 1833 .rept 32 1834 fmr .Lreg,.Lreg 1835 .Lreg=.Lreg+1 1836 .endr 1837 1838FTR_SECTION_ELSE 1839/* 1840 * To denormalise we need to move a copy of the register to itself. 1841 * For POWER7 do that here for the first 32 VSX registers only. 1842 */ 1843 mfmsr r10 1844 oris r10,r10,MSR_VSX@h 1845 mtmsrd r10 1846 sync 1847 1848 .Lreg=0 1849 .rept 32 1850 XVCPSGNDP(.Lreg,.Lreg,.Lreg) 1851 .Lreg=.Lreg+1 1852 .endr 1853 1854ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) 1855 1856BEGIN_FTR_SECTION 1857 b denorm_done 1858END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) 1859/* 1860 * To denormalise we need to move a copy of the register to itself. 1861 * For POWER8 we need to do that for all 64 VSX registers 1862 */ 1863 .Lreg=32 1864 .rept 32 1865 XVCPSGNDP(.Lreg,.Lreg,.Lreg) 1866 .Lreg=.Lreg+1 1867 .endr 1868 1869denorm_done: 1870 mfspr r11,SPRN_HSRR0 1871 subi r11,r11,4 1872 mtspr SPRN_HSRR0,r11 1873 mtcrf 0x80,r9 1874 ld r9,PACA_EXGEN+EX_R9(r13) 1875 RESTORE_PPR_PACA(PACA_EXGEN, r10) 1876BEGIN_FTR_SECTION 1877 ld r10,PACA_EXGEN+EX_CFAR(r13) 1878 mtspr SPRN_CFAR,r10 1879END_FTR_SECTION_IFSET(CPU_FTR_CFAR) 1880 ld r10,PACA_EXGEN+EX_R10(r13) 1881 ld r11,PACA_EXGEN+EX_R11(r13) 1882 ld r12,PACA_EXGEN+EX_R12(r13) 1883 ld r13,PACA_EXGEN+EX_R13(r13) 1884 HRFI_TO_UNKNOWN 1885 b . 1886#endif 1887 1888EXC_COMMON(denorm_common, 0x1500, unknown_exception) 1889 1890 1891#ifdef CONFIG_CBE_RAS 1892EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100) 1893 INT_HANDLER cbe_maintenance, 0x1600, ool=1, hsrr=EXC_HV, kvm=1 1894EXC_REAL_END(cbe_maintenance, 0x1600, 0x100) 1895EXC_VIRT_NONE(0x5600, 0x100) 1896INT_KVM_HANDLER cbe_maintenance, 0x1600, EXC_HV, PACA_EXGEN, 1 1897EXC_COMMON(cbe_maintenance_common, 0x1600, cbe_maintenance_exception) 1898#else /* CONFIG_CBE_RAS */ 1899EXC_REAL_NONE(0x1600, 0x100) 1900EXC_VIRT_NONE(0x5600, 0x100) 1901#endif 1902 1903 1904EXC_REAL_BEGIN(altivec_assist, 0x1700, 0x100) 1905 INT_HANDLER altivec_assist, 0x1700, kvm=1 1906EXC_REAL_END(altivec_assist, 0x1700, 0x100) 1907EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100) 1908 INT_HANDLER altivec_assist, 0x1700, virt=1 1909EXC_VIRT_END(altivec_assist, 0x5700, 0x100) 1910INT_KVM_HANDLER altivec_assist, 0x1700, EXC_STD, PACA_EXGEN, 0 1911#ifdef CONFIG_ALTIVEC 1912EXC_COMMON(altivec_assist_common, 0x1700, altivec_assist_exception) 1913#else 1914EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception) 1915#endif 1916 1917 1918#ifdef CONFIG_CBE_RAS 1919EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100) 1920 INT_HANDLER cbe_thermal, 0x1800, ool=1, hsrr=EXC_HV, kvm=1 1921EXC_REAL_END(cbe_thermal, 0x1800, 0x100) 1922EXC_VIRT_NONE(0x5800, 0x100) 1923INT_KVM_HANDLER cbe_thermal, 0x1800, EXC_HV, PACA_EXGEN, 1 1924EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception) 1925#else /* CONFIG_CBE_RAS */ 1926EXC_REAL_NONE(0x1800, 0x100) 1927EXC_VIRT_NONE(0x5800, 0x100) 1928#endif 1929 1930 1931#ifdef CONFIG_PPC_WATCHDOG 1932 1933#define MASKED_DEC_HANDLER_LABEL 3f 1934 1935#define MASKED_DEC_HANDLER(_H) \ 19363: /* soft-nmi */ \ 1937 std r12,PACA_EXGEN+EX_R12(r13); \ 1938 GET_SCRATCH0(r10); \ 1939 std r10,PACA_EXGEN+EX_R13(r13); \ 1940 INT_SAVE_SRR_AND_JUMP soft_nmi_common, _H, 1 1941 1942/* 1943 * Branch to soft_nmi_interrupt using the emergency stack. The emergency 1944 * stack is one that is usable by maskable interrupts so long as MSR_EE 1945 * remains off. It is used for recovery when something has corrupted the 1946 * normal kernel stack, for example. The "soft NMI" must not use the process 1947 * stack because we want irq disabled sections to avoid touching the stack 1948 * at all (other than PMU interrupts), so use the emergency stack for this, 1949 * and run it entirely with interrupts hard disabled. 1950 */ 1951EXC_COMMON_BEGIN(soft_nmi_common) 1952 mr r10,r1 1953 ld r1,PACAEMERGSP(r13) 1954 subi r1,r1,INT_FRAME_SIZE 1955 INT_COMMON 0x900, PACA_EXGEN, 0, 1, 1, 0, 0 1956 bl save_nvgprs 1957 addi r3,r1,STACK_FRAME_OVERHEAD 1958 bl soft_nmi_interrupt 1959 b ret_from_except 1960 1961#else /* CONFIG_PPC_WATCHDOG */ 1962#define MASKED_DEC_HANDLER_LABEL 2f /* normal return */ 1963#define MASKED_DEC_HANDLER(_H) 1964#endif /* CONFIG_PPC_WATCHDOG */ 1965 1966/* 1967 * An interrupt came in while soft-disabled. We set paca->irq_happened, then: 1968 * - If it was a decrementer interrupt, we bump the dec to max and and return. 1969 * - If it was a doorbell we return immediately since doorbells are edge 1970 * triggered and won't automatically refire. 1971 * - If it was a HMI we return immediately since we handled it in realmode 1972 * and it won't refire. 1973 * - Else it is one of PACA_IRQ_MUST_HARD_MASK, so hard disable and return. 1974 * This is called with r10 containing the value to OR to the paca field. 1975 */ 1976.macro MASKED_INTERRUPT hsrr 1977 .if \hsrr 1978masked_Hinterrupt: 1979 .else 1980masked_interrupt: 1981 .endif 1982 std r11,PACA_EXGEN+EX_R11(r13) 1983 lbz r11,PACAIRQHAPPENED(r13) 1984 or r11,r11,r10 1985 stb r11,PACAIRQHAPPENED(r13) 1986 cmpwi r10,PACA_IRQ_DEC 1987 bne 1f 1988 lis r10,0x7fff 1989 ori r10,r10,0xffff 1990 mtspr SPRN_DEC,r10 1991 b MASKED_DEC_HANDLER_LABEL 19921: andi. r10,r10,PACA_IRQ_MUST_HARD_MASK 1993 beq 2f 1994 .if \hsrr 1995 mfspr r10,SPRN_HSRR1 1996 xori r10,r10,MSR_EE /* clear MSR_EE */ 1997 mtspr SPRN_HSRR1,r10 1998 .else 1999 mfspr r10,SPRN_SRR1 2000 xori r10,r10,MSR_EE /* clear MSR_EE */ 2001 mtspr SPRN_SRR1,r10 2002 .endif 2003 ori r11,r11,PACA_IRQ_HARD_DIS 2004 stb r11,PACAIRQHAPPENED(r13) 20052: /* done */ 2006 mtcrf 0x80,r9 2007 std r1,PACAR1(r13) 2008 ld r9,PACA_EXGEN+EX_R9(r13) 2009 ld r10,PACA_EXGEN+EX_R10(r13) 2010 ld r11,PACA_EXGEN+EX_R11(r13) 2011 /* returns to kernel where r13 must be set up, so don't restore it */ 2012 .if \hsrr 2013 HRFI_TO_KERNEL 2014 .else 2015 RFI_TO_KERNEL 2016 .endif 2017 b . 2018 MASKED_DEC_HANDLER(\hsrr\()) 2019.endm 2020 2021TRAMP_REAL_BEGIN(stf_barrier_fallback) 2022 std r9,PACA_EXRFI+EX_R9(r13) 2023 std r10,PACA_EXRFI+EX_R10(r13) 2024 sync 2025 ld r9,PACA_EXRFI+EX_R9(r13) 2026 ld r10,PACA_EXRFI+EX_R10(r13) 2027 ori 31,31,0 2028 .rept 14 2029 b 1f 20301: 2031 .endr 2032 blr 2033 2034TRAMP_REAL_BEGIN(rfi_flush_fallback) 2035 SET_SCRATCH0(r13); 2036 GET_PACA(r13); 2037 std r1,PACA_EXRFI+EX_R12(r13) 2038 ld r1,PACAKSAVE(r13) 2039 std r9,PACA_EXRFI+EX_R9(r13) 2040 std r10,PACA_EXRFI+EX_R10(r13) 2041 std r11,PACA_EXRFI+EX_R11(r13) 2042 mfctr r9 2043 ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) 2044 ld r11,PACA_L1D_FLUSH_SIZE(r13) 2045 srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */ 2046 mtctr r11 2047 DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */ 2048 2049 /* order ld/st prior to dcbt stop all streams with flushing */ 2050 sync 2051 2052 /* 2053 * The load adresses are at staggered offsets within cachelines, 2054 * which suits some pipelines better (on others it should not 2055 * hurt). 2056 */ 20571: 2058 ld r11,(0x80 + 8)*0(r10) 2059 ld r11,(0x80 + 8)*1(r10) 2060 ld r11,(0x80 + 8)*2(r10) 2061 ld r11,(0x80 + 8)*3(r10) 2062 ld r11,(0x80 + 8)*4(r10) 2063 ld r11,(0x80 + 8)*5(r10) 2064 ld r11,(0x80 + 8)*6(r10) 2065 ld r11,(0x80 + 8)*7(r10) 2066 addi r10,r10,0x80*8 2067 bdnz 1b 2068 2069 mtctr r9 2070 ld r9,PACA_EXRFI+EX_R9(r13) 2071 ld r10,PACA_EXRFI+EX_R10(r13) 2072 ld r11,PACA_EXRFI+EX_R11(r13) 2073 ld r1,PACA_EXRFI+EX_R12(r13) 2074 GET_SCRATCH0(r13); 2075 rfid 2076 2077TRAMP_REAL_BEGIN(hrfi_flush_fallback) 2078 SET_SCRATCH0(r13); 2079 GET_PACA(r13); 2080 std r1,PACA_EXRFI+EX_R12(r13) 2081 ld r1,PACAKSAVE(r13) 2082 std r9,PACA_EXRFI+EX_R9(r13) 2083 std r10,PACA_EXRFI+EX_R10(r13) 2084 std r11,PACA_EXRFI+EX_R11(r13) 2085 mfctr r9 2086 ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) 2087 ld r11,PACA_L1D_FLUSH_SIZE(r13) 2088 srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */ 2089 mtctr r11 2090 DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */ 2091 2092 /* order ld/st prior to dcbt stop all streams with flushing */ 2093 sync 2094 2095 /* 2096 * The load adresses are at staggered offsets within cachelines, 2097 * which suits some pipelines better (on others it should not 2098 * hurt). 2099 */ 21001: 2101 ld r11,(0x80 + 8)*0(r10) 2102 ld r11,(0x80 + 8)*1(r10) 2103 ld r11,(0x80 + 8)*2(r10) 2104 ld r11,(0x80 + 8)*3(r10) 2105 ld r11,(0x80 + 8)*4(r10) 2106 ld r11,(0x80 + 8)*5(r10) 2107 ld r11,(0x80 + 8)*6(r10) 2108 ld r11,(0x80 + 8)*7(r10) 2109 addi r10,r10,0x80*8 2110 bdnz 1b 2111 2112 mtctr r9 2113 ld r9,PACA_EXRFI+EX_R9(r13) 2114 ld r10,PACA_EXRFI+EX_R10(r13) 2115 ld r11,PACA_EXRFI+EX_R11(r13) 2116 ld r1,PACA_EXRFI+EX_R12(r13) 2117 GET_SCRATCH0(r13); 2118 hrfid 2119 2120/* 2121 * Real mode exceptions actually use this too, but alternate 2122 * instruction code patches (which end up in the common .text area) 2123 * cannot reach these if they are put there. 2124 */ 2125USE_FIXED_SECTION(virt_trampolines) 2126 MASKED_INTERRUPT EXC_STD 2127 MASKED_INTERRUPT EXC_HV 2128 2129#ifdef CONFIG_KVM_BOOK3S_64_HANDLER 2130TRAMP_REAL_BEGIN(kvmppc_skip_interrupt) 2131 /* 2132 * Here all GPRs are unchanged from when the interrupt happened 2133 * except for r13, which is saved in SPRG_SCRATCH0. 2134 */ 2135 mfspr r13, SPRN_SRR0 2136 addi r13, r13, 4 2137 mtspr SPRN_SRR0, r13 2138 GET_SCRATCH0(r13) 2139 RFI_TO_KERNEL 2140 b . 2141 2142TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt) 2143 /* 2144 * Here all GPRs are unchanged from when the interrupt happened 2145 * except for r13, which is saved in SPRG_SCRATCH0. 2146 */ 2147 mfspr r13, SPRN_HSRR0 2148 addi r13, r13, 4 2149 mtspr SPRN_HSRR0, r13 2150 GET_SCRATCH0(r13) 2151 HRFI_TO_KERNEL 2152 b . 2153#endif 2154 2155/* 2156 * Ensure that any handlers that get invoked from the exception prologs 2157 * above are below the first 64KB (0x10000) of the kernel image because 2158 * the prologs assemble the addresses of these handlers using the 2159 * LOAD_HANDLER macro, which uses an ori instruction. 2160 */ 2161 2162/*** Common interrupt handlers ***/ 2163 2164 2165 /* 2166 * Relocation-on interrupts: A subset of the interrupts can be delivered 2167 * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering 2168 * it. Addresses are the same as the original interrupt addresses, but 2169 * offset by 0xc000000000004000. 2170 * It's impossible to receive interrupts below 0x300 via this mechanism. 2171 * KVM: None of these traps are from the guest ; anything that escalated 2172 * to HV=1 from HV=0 is delivered via real mode handlers. 2173 */ 2174 2175 /* 2176 * This uses the standard macro, since the original 0x300 vector 2177 * only has extra guff for STAB-based processors -- which never 2178 * come here. 2179 */ 2180 2181EXC_COMMON_BEGIN(ppc64_runlatch_on_trampoline) 2182 b __ppc64_runlatch_on 2183 2184USE_FIXED_SECTION(virt_trampolines) 2185 /* 2186 * The __end_interrupts marker must be past the out-of-line (OOL) 2187 * handlers, so that they are copied to real address 0x100 when running 2188 * a relocatable kernel. This ensures they can be reached from the short 2189 * trampoline handlers (like 0x4f00, 0x4f20, etc.) which branch 2190 * directly, without using LOAD_HANDLER(). 2191 */ 2192 .align 7 2193 .globl __end_interrupts 2194__end_interrupts: 2195DEFINE_FIXED_SYMBOL(__end_interrupts) 2196 2197#ifdef CONFIG_PPC_970_NAP 2198 /* 2199 * Called by exception entry code if _TLF_NAPPING was set, this clears 2200 * the NAPPING flag, and redirects the exception exit to 2201 * power4_fixup_nap_return. 2202 */ 2203 .globl power4_fixup_nap 2204EXC_COMMON_BEGIN(power4_fixup_nap) 2205 andc r9,r9,r10 2206 std r9,TI_LOCAL_FLAGS(r11) 2207 LOAD_REG_ADDR(r10, power4_idle_nap_return) 2208 std r10,_NIP(r1) 2209 blr 2210 2211power4_idle_nap_return: 2212 blr 2213#endif 2214 2215CLOSE_FIXED_SECTION(real_vectors); 2216CLOSE_FIXED_SECTION(real_trampolines); 2217CLOSE_FIXED_SECTION(virt_vectors); 2218CLOSE_FIXED_SECTION(virt_trampolines); 2219 2220USE_TEXT_SECTION() 2221 2222/* MSR[RI] should be clear because this uses SRR[01] */ 2223enable_machine_check: 2224 mflr r0 2225 bcl 20,31,$+4 22260: mflr r3 2227 addi r3,r3,(1f - 0b) 2228 mtspr SPRN_SRR0,r3 2229 mfmsr r3 2230 ori r3,r3,MSR_ME 2231 mtspr SPRN_SRR1,r3 2232 RFI_TO_KERNEL 22331: mtlr r0 2234 blr 2235 2236/* MSR[RI] should be clear because this uses SRR[01] */ 2237disable_machine_check: 2238 mflr r0 2239 bcl 20,31,$+4 22400: mflr r3 2241 addi r3,r3,(1f - 0b) 2242 mtspr SPRN_SRR0,r3 2243 mfmsr r3 2244 li r4,MSR_ME 2245 andc r3,r3,r4 2246 mtspr SPRN_SRR1,r3 2247 RFI_TO_KERNEL 22481: mtlr r0 2249 blr 2250 2251/* 2252 * Hash table stuff 2253 */ 2254 .balign IFETCH_ALIGN_BYTES 2255do_hash_page: 2256#ifdef CONFIG_PPC_BOOK3S_64 2257 lis r0,(DSISR_BAD_FAULT_64S | DSISR_DABRMATCH | DSISR_KEYFAULT)@h 2258 ori r0,r0,DSISR_BAD_FAULT_64S@l 2259 and. r0,r5,r0 /* weird error? */ 2260 bne- handle_page_fault /* if not, try to insert a HPTE */ 2261 ld r11, PACA_THREAD_INFO(r13) 2262 lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */ 2263 andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */ 2264 bne 77f /* then don't call hash_page now */ 2265 2266 /* 2267 * r3 contains the trap number 2268 * r4 contains the faulting address 2269 * r5 contains dsisr 2270 * r6 msr 2271 * 2272 * at return r3 = 0 for success, 1 for page fault, negative for error 2273 */ 2274 bl __hash_page /* build HPTE if possible */ 2275 cmpdi r3,0 /* see if __hash_page succeeded */ 2276 2277 /* Success */ 2278 beq fast_exc_return_irq /* Return from exception on success */ 2279 2280 /* Error */ 2281 blt- 13f 2282 2283 /* Reload DAR/DSISR into r4/r5 for the DABR check below */ 2284 ld r4,_DAR(r1) 2285 ld r5,_DSISR(r1) 2286#endif /* CONFIG_PPC_BOOK3S_64 */ 2287 2288/* Here we have a page fault that hash_page can't handle. */ 2289handle_page_fault: 229011: andis. r0,r5,DSISR_DABRMATCH@h 2291 bne- handle_dabr_fault 2292 addi r3,r1,STACK_FRAME_OVERHEAD 2293 bl do_page_fault 2294 cmpdi r3,0 2295 beq+ ret_from_except_lite 2296 bl save_nvgprs 2297 mr r5,r3 2298 addi r3,r1,STACK_FRAME_OVERHEAD 2299 ld r4,_DAR(r1) 2300 bl bad_page_fault 2301 b ret_from_except 2302 2303/* We have a data breakpoint exception - handle it */ 2304handle_dabr_fault: 2305 bl save_nvgprs 2306 ld r4,_DAR(r1) 2307 ld r5,_DSISR(r1) 2308 addi r3,r1,STACK_FRAME_OVERHEAD 2309 bl do_break 2310 /* 2311 * do_break() may have changed the NV GPRS while handling a breakpoint. 2312 * If so, we need to restore them with their updated values. Don't use 2313 * ret_from_except_lite here. 2314 */ 2315 b ret_from_except 2316 2317 2318#ifdef CONFIG_PPC_BOOK3S_64 2319/* We have a page fault that hash_page could handle but HV refused 2320 * the PTE insertion 2321 */ 232213: bl save_nvgprs 2323 mr r5,r3 2324 addi r3,r1,STACK_FRAME_OVERHEAD 2325 ld r4,_DAR(r1) 2326 bl low_hash_fault 2327 b ret_from_except 2328#endif 2329 2330/* 2331 * We come here as a result of a DSI at a point where we don't want 2332 * to call hash_page, such as when we are accessing memory (possibly 2333 * user memory) inside a PMU interrupt that occurred while interrupts 2334 * were soft-disabled. We want to invoke the exception handler for 2335 * the access, or panic if there isn't a handler. 2336 */ 233777: bl save_nvgprs 2338 addi r3,r1,STACK_FRAME_OVERHEAD 2339 li r5,SIGSEGV 2340 bl bad_page_fault 2341 b ret_from_except 2342 2343/* 2344 * When doorbell is triggered from system reset wakeup, the message is 2345 * not cleared, so it would fire again when EE is enabled. 2346 * 2347 * When coming from local_irq_enable, there may be the same problem if 2348 * we were hard disabled. 2349 * 2350 * Execute msgclr to clear pending exceptions before handling it. 2351 */ 2352h_doorbell_common_msgclr: 2353 LOAD_REG_IMMEDIATE(r3, PPC_DBELL_MSGTYPE << (63-36)) 2354 PPC_MSGCLR(3) 2355 b h_doorbell_common 2356 2357doorbell_super_common_msgclr: 2358 LOAD_REG_IMMEDIATE(r3, PPC_DBELL_MSGTYPE << (63-36)) 2359 PPC_MSGCLRP(3) 2360 b doorbell_super_common 2361 2362/* 2363 * Called from arch_local_irq_enable when an interrupt needs 2364 * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate 2365 * which kind of interrupt. MSR:EE is already off. We generate a 2366 * stackframe like if a real interrupt had happened. 2367 * 2368 * Note: While MSR:EE is off, we need to make sure that _MSR 2369 * in the generated frame has EE set to 1 or the exception 2370 * handler will not properly re-enable them. 2371 * 2372 * Note that we don't specify LR as the NIP (return address) for 2373 * the interrupt because that would unbalance the return branch 2374 * predictor. 2375 */ 2376_GLOBAL(__replay_interrupt) 2377 /* We are going to jump to the exception common code which 2378 * will retrieve various register values from the PACA which 2379 * we don't give a damn about, so we don't bother storing them. 2380 */ 2381 mfmsr r12 2382 LOAD_REG_ADDR(r11, replay_interrupt_return) 2383 mfcr r9 2384 ori r12,r12,MSR_EE 2385 cmpwi r3,0x900 2386 beq decrementer_common 2387 cmpwi r3,0x500 2388BEGIN_FTR_SECTION 2389 beq h_virt_irq_common 2390FTR_SECTION_ELSE 2391 beq hardware_interrupt_common 2392ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_300) 2393 cmpwi r3,0xf00 2394 beq performance_monitor_common 2395BEGIN_FTR_SECTION 2396 cmpwi r3,0xa00 2397 beq h_doorbell_common_msgclr 2398 cmpwi r3,0xe60 2399 beq hmi_exception_common 2400FTR_SECTION_ELSE 2401 cmpwi r3,0xa00 2402 beq doorbell_super_common_msgclr 2403ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) 2404replay_interrupt_return: 2405 blr 2406 2407_ASM_NOKPROBE_SYMBOL(__replay_interrupt) 2408