1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 *  Boot code and exception vectors for Book3E processors
4 *
5 *  Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
6 */
7
8#include <linux/threads.h>
9#include <asm/reg.h>
10#include <asm/page.h>
11#include <asm/ppc_asm.h>
12#include <asm/asm-offsets.h>
13#include <asm/cputable.h>
14#include <asm/setup.h>
15#include <asm/thread_info.h>
16#include <asm/reg_a2.h>
17#include <asm/exception-64e.h>
18#include <asm/bug.h>
19#include <asm/irqflags.h>
20#include <asm/ptrace.h>
21#include <asm/ppc-opcode.h>
22#include <asm/mmu.h>
23#include <asm/hw_irq.h>
24#include <asm/kvm_asm.h>
25#include <asm/kvm_booke_hv_asm.h>
26#include <asm/feature-fixups.h>
27#include <asm/context_tracking.h>
28
29/* 64e interrupt returns always use SRR registers */
30#define fast_interrupt_return fast_interrupt_return_srr
31#define interrupt_return interrupt_return_srr
32
33/* XXX This will ultimately add space for a special exception save
34 *     structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
35 *     when taking special interrupts. For now we don't support that,
36 *     special interrupts from within a non-standard level will probably
37 *     blow you up
38 */
39#define SPECIAL_EXC_SRR0	0
40#define SPECIAL_EXC_SRR1	1
41#define SPECIAL_EXC_SPRG_GEN	2
42#define SPECIAL_EXC_SPRG_TLB	3
43#define SPECIAL_EXC_MAS0	4
44#define SPECIAL_EXC_MAS1	5
45#define SPECIAL_EXC_MAS2	6
46#define SPECIAL_EXC_MAS3	7
47#define SPECIAL_EXC_MAS6	8
48#define SPECIAL_EXC_MAS7	9
49#define SPECIAL_EXC_MAS5	10	/* E.HV only */
50#define SPECIAL_EXC_MAS8	11	/* E.HV only */
51#define SPECIAL_EXC_IRQHAPPENED	12
52#define SPECIAL_EXC_DEAR	13
53#define SPECIAL_EXC_ESR		14
54#define SPECIAL_EXC_SOFTE	15
55#define SPECIAL_EXC_CSRR0	16
56#define SPECIAL_EXC_CSRR1	17
57/* must be even to keep 16-byte stack alignment */
58#define SPECIAL_EXC_END		18
59
60#define SPECIAL_EXC_FRAME_SIZE	(INT_FRAME_SIZE + SPECIAL_EXC_END * 8)
61#define SPECIAL_EXC_FRAME_OFFS  (INT_FRAME_SIZE - 288)
62
63#define SPECIAL_EXC_STORE(reg, name) \
64	std	reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1)
65
66#define SPECIAL_EXC_LOAD(reg, name) \
67	ld	reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1)
68
69special_reg_save:
70	/*
71	 * We only need (or have stack space) to save this stuff if
72	 * we interrupted the kernel.
73	 */
74	ld	r3,_MSR(r1)
75	andi.	r3,r3,MSR_PR
76	bnelr
77
78	/*
79	 * Advance to the next TLB exception frame for handler
80	 * types that don't do it automatically.
81	 */
82	LOAD_REG_ADDR(r11,extlb_level_exc)
83	lwz	r12,0(r11)
84	mfspr	r10,SPRN_SPRG_TLB_EXFRAME
85	add	r10,r10,r12
86	mtspr	SPRN_SPRG_TLB_EXFRAME,r10
87
88	/*
89	 * Save registers needed to allow nesting of certain exceptions
90	 * (such as TLB misses) inside special exception levels
91	 */
92	mfspr	r10,SPRN_SRR0
93	SPECIAL_EXC_STORE(r10,SRR0)
94	mfspr	r10,SPRN_SRR1
95	SPECIAL_EXC_STORE(r10,SRR1)
96	mfspr	r10,SPRN_SPRG_GEN_SCRATCH
97	SPECIAL_EXC_STORE(r10,SPRG_GEN)
98	mfspr	r10,SPRN_SPRG_TLB_SCRATCH
99	SPECIAL_EXC_STORE(r10,SPRG_TLB)
100	mfspr	r10,SPRN_MAS0
101	SPECIAL_EXC_STORE(r10,MAS0)
102	mfspr	r10,SPRN_MAS1
103	SPECIAL_EXC_STORE(r10,MAS1)
104	mfspr	r10,SPRN_MAS2
105	SPECIAL_EXC_STORE(r10,MAS2)
106	mfspr	r10,SPRN_MAS3
107	SPECIAL_EXC_STORE(r10,MAS3)
108	mfspr	r10,SPRN_MAS6
109	SPECIAL_EXC_STORE(r10,MAS6)
110	mfspr	r10,SPRN_MAS7
111	SPECIAL_EXC_STORE(r10,MAS7)
112BEGIN_FTR_SECTION
113	mfspr	r10,SPRN_MAS5
114	SPECIAL_EXC_STORE(r10,MAS5)
115	mfspr	r10,SPRN_MAS8
116	SPECIAL_EXC_STORE(r10,MAS8)
117
118	/* MAS5/8 could have inappropriate values if we interrupted KVM code */
119	li	r10,0
120	mtspr	SPRN_MAS5,r10
121	mtspr	SPRN_MAS8,r10
122END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
123	mfspr	r10,SPRN_DEAR
124	SPECIAL_EXC_STORE(r10,DEAR)
125	mfspr	r10,SPRN_ESR
126	SPECIAL_EXC_STORE(r10,ESR)
127
128	ld	r10,_NIP(r1)
129	SPECIAL_EXC_STORE(r10,CSRR0)
130	ld	r10,_MSR(r1)
131	SPECIAL_EXC_STORE(r10,CSRR1)
132
133	blr
134
135ret_from_level_except:
136	ld	r3,_MSR(r1)
137	andi.	r3,r3,MSR_PR
138	beq	1f
139	REST_NVGPRS(r1)
140	b	interrupt_return
1411:
142
143	LOAD_REG_ADDR(r11,extlb_level_exc)
144	lwz	r12,0(r11)
145	mfspr	r10,SPRN_SPRG_TLB_EXFRAME
146	sub	r10,r10,r12
147	mtspr	SPRN_SPRG_TLB_EXFRAME,r10
148
149	/*
150	 * It's possible that the special level exception interrupted a
151	 * TLB miss handler, and inserted the same entry that the
152	 * interrupted handler was about to insert.  On CPUs without TLB
153	 * write conditional, this can result in a duplicate TLB entry.
154	 * Wipe all non-bolted entries to be safe.
155	 *
156	 * Note that this doesn't protect against any TLB misses
157	 * we may take accessing the stack from here to the end of
158	 * the special level exception.  It's not clear how we can
159	 * reasonably protect against that, but only CPUs with
160	 * neither TLB write conditional nor bolted kernel memory
161	 * are affected.  Do any such CPUs even exist?
162	 */
163	PPC_TLBILX_ALL(0,R0)
164
165	REST_NVGPRS(r1)
166
167	SPECIAL_EXC_LOAD(r10,SRR0)
168	mtspr	SPRN_SRR0,r10
169	SPECIAL_EXC_LOAD(r10,SRR1)
170	mtspr	SPRN_SRR1,r10
171	SPECIAL_EXC_LOAD(r10,SPRG_GEN)
172	mtspr	SPRN_SPRG_GEN_SCRATCH,r10
173	SPECIAL_EXC_LOAD(r10,SPRG_TLB)
174	mtspr	SPRN_SPRG_TLB_SCRATCH,r10
175	SPECIAL_EXC_LOAD(r10,MAS0)
176	mtspr	SPRN_MAS0,r10
177	SPECIAL_EXC_LOAD(r10,MAS1)
178	mtspr	SPRN_MAS1,r10
179	SPECIAL_EXC_LOAD(r10,MAS2)
180	mtspr	SPRN_MAS2,r10
181	SPECIAL_EXC_LOAD(r10,MAS3)
182	mtspr	SPRN_MAS3,r10
183	SPECIAL_EXC_LOAD(r10,MAS6)
184	mtspr	SPRN_MAS6,r10
185	SPECIAL_EXC_LOAD(r10,MAS7)
186	mtspr	SPRN_MAS7,r10
187BEGIN_FTR_SECTION
188	SPECIAL_EXC_LOAD(r10,MAS5)
189	mtspr	SPRN_MAS5,r10
190	SPECIAL_EXC_LOAD(r10,MAS8)
191	mtspr	SPRN_MAS8,r10
192END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
193
194	SPECIAL_EXC_LOAD(r10,DEAR)
195	mtspr	SPRN_DEAR,r10
196	SPECIAL_EXC_LOAD(r10,ESR)
197	mtspr	SPRN_ESR,r10
198
199	stdcx.	r0,0,r1		/* to clear the reservation */
200
201	REST_4GPRS(2, r1)
202	REST_4GPRS(6, r1)
203
204	ld	r10,_CTR(r1)
205	ld	r11,_XER(r1)
206	mtctr	r10
207	mtxer	r11
208
209	blr
210
211.macro ret_from_level srr0 srr1 paca_ex scratch
212	bl	ret_from_level_except
213
214	ld	r10,_LINK(r1)
215	ld	r11,_CCR(r1)
216	ld	r0,GPR13(r1)
217	mtlr	r10
218	mtcr	r11
219
220	ld	r10,GPR10(r1)
221	ld	r11,GPR11(r1)
222	ld	r12,GPR12(r1)
223	mtspr	\scratch,r0
224
225	std	r10,\paca_ex+EX_R10(r13);
226	std	r11,\paca_ex+EX_R11(r13);
227	ld	r10,_NIP(r1)
228	ld	r11,_MSR(r1)
229	ld	r0,GPR0(r1)
230	ld	r1,GPR1(r1)
231	mtspr	\srr0,r10
232	mtspr	\srr1,r11
233	ld	r10,\paca_ex+EX_R10(r13)
234	ld	r11,\paca_ex+EX_R11(r13)
235	mfspr	r13,\scratch
236.endm
237
238ret_from_crit_except:
239	ret_from_level SPRN_CSRR0 SPRN_CSRR1 PACA_EXCRIT SPRN_SPRG_CRIT_SCRATCH
240	rfci
241
242ret_from_mc_except:
243	ret_from_level SPRN_MCSRR0 SPRN_MCSRR1 PACA_EXMC SPRN_SPRG_MC_SCRATCH
244	rfmci
245
246/* Exception prolog code for all exceptions */
247#define EXCEPTION_PROLOG(n, intnum, type, addition)	    		    \
248	mtspr	SPRN_SPRG_##type##_SCRATCH,r13;	/* get spare registers */   \
249	mfspr	r13,SPRN_SPRG_PACA;	/* get PACA */			    \
250	std	r10,PACA_EX##type+EX_R10(r13);				    \
251	std	r11,PACA_EX##type+EX_R11(r13);				    \
252	mfcr	r10;			/* save CR */			    \
253	mfspr	r11,SPRN_##type##_SRR1;/* what are we coming from */	    \
254	DO_KVM	intnum,SPRN_##type##_SRR1;    /* KVM hook */		    \
255	stw	r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
256	addition;			/* additional code for that exc. */ \
257	std	r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */  \
258	type##_SET_KSTACK;		/* get special stack if necessary */\
259	andi.	r10,r11,MSR_PR;		/* save stack pointer */	    \
260	beq	1f;			/* branch around if supervisor */   \
261	ld	r1,PACAKSAVE(r13);	/* get kernel stack coming from usr */\
2621:	type##_BTB_FLUSH		\
263	cmpdi	cr1,r1,0;		/* check if SP makes sense */	    \
264	bge-	cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
265	mfspr	r10,SPRN_##type##_SRR0;	/* read SRR0 before touching stack */
266
267/* Exception type-specific macros */
268#define	GEN_SET_KSTACK							    \
269	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack */
270#define SPRN_GEN_SRR0	SPRN_SRR0
271#define SPRN_GEN_SRR1	SPRN_SRR1
272
273#define	GDBELL_SET_KSTACK	GEN_SET_KSTACK
274#define SPRN_GDBELL_SRR0	SPRN_GSRR0
275#define SPRN_GDBELL_SRR1	SPRN_GSRR1
276
277#define CRIT_SET_KSTACK						            \
278	ld	r1,PACA_CRIT_STACK(r13);				    \
279	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE
280#define SPRN_CRIT_SRR0	SPRN_CSRR0
281#define SPRN_CRIT_SRR1	SPRN_CSRR1
282
283#define DBG_SET_KSTACK						            \
284	ld	r1,PACA_DBG_STACK(r13);					    \
285	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE
286#define SPRN_DBG_SRR0	SPRN_DSRR0
287#define SPRN_DBG_SRR1	SPRN_DSRR1
288
289#define MC_SET_KSTACK						            \
290	ld	r1,PACA_MC_STACK(r13);					    \
291	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE
292#define SPRN_MC_SRR0	SPRN_MCSRR0
293#define SPRN_MC_SRR1	SPRN_MCSRR1
294
295#ifdef CONFIG_PPC_FSL_BOOK3E
296#define GEN_BTB_FLUSH			\
297	START_BTB_FLUSH_SECTION		\
298		beq 1f;			\
299		BTB_FLUSH(r10)			\
300		1:		\
301	END_BTB_FLUSH_SECTION
302
303#define CRIT_BTB_FLUSH			\
304	START_BTB_FLUSH_SECTION		\
305		BTB_FLUSH(r10)		\
306	END_BTB_FLUSH_SECTION
307
308#define DBG_BTB_FLUSH CRIT_BTB_FLUSH
309#define MC_BTB_FLUSH CRIT_BTB_FLUSH
310#define GDBELL_BTB_FLUSH GEN_BTB_FLUSH
311#else
312#define GEN_BTB_FLUSH
313#define CRIT_BTB_FLUSH
314#define DBG_BTB_FLUSH
315#define MC_BTB_FLUSH
316#define GDBELL_BTB_FLUSH
317#endif
318
319#define NORMAL_EXCEPTION_PROLOG(n, intnum, addition)			    \
320	EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n))
321
322#define CRIT_EXCEPTION_PROLOG(n, intnum, addition)			    \
323	EXCEPTION_PROLOG(n, intnum, CRIT, addition##_CRIT(n))
324
325#define DBG_EXCEPTION_PROLOG(n, intnum, addition)			    \
326	EXCEPTION_PROLOG(n, intnum, DBG, addition##_DBG(n))
327
328#define MC_EXCEPTION_PROLOG(n, intnum, addition)			    \
329	EXCEPTION_PROLOG(n, intnum, MC, addition##_MC(n))
330
331#define GDBELL_EXCEPTION_PROLOG(n, intnum, addition)			    \
332	EXCEPTION_PROLOG(n, intnum, GDBELL, addition##_GDBELL(n))
333
334/* Variants of the "addition" argument for the prolog
335 */
336#define PROLOG_ADDITION_NONE_GEN(n)
337#define PROLOG_ADDITION_NONE_GDBELL(n)
338#define PROLOG_ADDITION_NONE_CRIT(n)
339#define PROLOG_ADDITION_NONE_DBG(n)
340#define PROLOG_ADDITION_NONE_MC(n)
341
342#define PROLOG_ADDITION_MASKABLE_GEN(n)					    \
343	lbz	r10,PACAIRQSOFTMASK(r13);	/* are irqs soft-masked? */ \
344	andi.	r10,r10,IRQS_DISABLED;	/* yes -> go out of line */ \
345	bne	masked_interrupt_book3e_##n
346
347/*
348 * Additional regs must be re-loaded from paca before EXCEPTION_COMMON* is
349 * called, because that does SAVE_NVGPRS which must see the original register
350 * values, otherwise the scratch values might be restored when exiting the
351 * interrupt.
352 */
353#define PROLOG_ADDITION_2REGS_GEN(n)					    \
354	std	r14,PACA_EXGEN+EX_R14(r13);				    \
355	std	r15,PACA_EXGEN+EX_R15(r13)
356
357#define PROLOG_ADDITION_1REG_GEN(n)					    \
358	std	r14,PACA_EXGEN+EX_R14(r13);
359
360#define PROLOG_ADDITION_2REGS_CRIT(n)					    \
361	std	r14,PACA_EXCRIT+EX_R14(r13);				    \
362	std	r15,PACA_EXCRIT+EX_R15(r13)
363
364#define PROLOG_ADDITION_2REGS_DBG(n)					    \
365	std	r14,PACA_EXDBG+EX_R14(r13);				    \
366	std	r15,PACA_EXDBG+EX_R15(r13)
367
368#define PROLOG_ADDITION_2REGS_MC(n)					    \
369	std	r14,PACA_EXMC+EX_R14(r13);				    \
370	std	r15,PACA_EXMC+EX_R15(r13)
371
372
373/* Core exception code for all exceptions except TLB misses. */
374#define EXCEPTION_COMMON_LVL(n, scratch, excf)				    \
375exc_##n##_common:							    \
376	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
377	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
378	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
379	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
380	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
381	std	r10,_NIP(r1);		/* save SRR0 to stackframe */	    \
382	std	r11,_MSR(r1);		/* save SRR1 to stackframe */	    \
383	beq	2f;			/* if from kernel mode */	    \
3842:	ld	r3,excf+EX_R10(r13);	/* get back r10 */		    \
385	ld	r4,excf+EX_R11(r13);	/* get back r11 */		    \
386	mfspr	r5,scratch;		/* get back r13 */		    \
387	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
388	ld	r2,PACATOC(r13);	/* get kernel TOC into r2 */	    \
389	mflr	r6;			/* save LR in stackframe */	    \
390	mfctr	r7;			/* save CTR in stackframe */	    \
391	mfspr	r8,SPRN_XER;		/* save XER in stackframe */	    \
392	ld	r9,excf+EX_R1(r13);	/* load orig r1 back from PACA */   \
393	lwz	r10,excf+EX_CR(r13);	/* load orig CR back from PACA	*/  \
394	lbz	r11,PACAIRQSOFTMASK(r13); /* get current IRQ softe */	    \
395	ld	r12,exception_marker@toc(r2);				    \
396	li	r0,0;							    \
397	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
398	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
399	std	r5,GPR13(r1);		/* save it to stackframe */	    \
400	std	r6,_LINK(r1);						    \
401	std	r7,_CTR(r1);						    \
402	std	r8,_XER(r1);						    \
403	li	r3,(n);			/* regs.trap vector */		    \
404	std	r9,0(r1);		/* store stack frame back link */   \
405	std	r10,_CCR(r1);		/* store orig CR in stackframe */   \
406	std	r9,GPR1(r1);		/* store stack frame back link */   \
407	std	r11,SOFTE(r1);		/* and save it to stackframe */     \
408	std	r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */	    \
409	std	r3,_TRAP(r1);		/* set trap number		*/  \
410	std	r0,RESULT(r1);		/* clear regs->result */	    \
411	SAVE_NVGPRS(r1);
412
413#define EXCEPTION_COMMON(n) \
414	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_GEN_SCRATCH, PACA_EXGEN)
415#define EXCEPTION_COMMON_CRIT(n) \
416	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_CRIT_SCRATCH, PACA_EXCRIT)
417#define EXCEPTION_COMMON_MC(n) \
418	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_MC_SCRATCH, PACA_EXMC)
419#define EXCEPTION_COMMON_DBG(n) \
420	EXCEPTION_COMMON_LVL(n, SPRN_SPRG_DBG_SCRATCH, PACA_EXDBG)
421
422/* XXX FIXME: Restore r14/r15 when necessary */
423#define BAD_STACK_TRAMPOLINE(n)						    \
424exc_##n##_bad_stack:							    \
425	li	r1,(n);			/* get exception number */	    \
426	sth	r1,PACA_TRAP_SAVE(r13);	/* store trap */		    \
427	b	bad_stack_book3e;	/* bad stack error */
428
429/* WARNING: If you change the layout of this stub, make sure you check
430	*   the debug exception handler which handles single stepping
431	*   into exceptions from userspace, and the MM code in
432	*   arch/powerpc/mm/tlb_nohash.c which patches the branch here
433	*   and would need to be updated if that branch is moved
434	*/
435#define	EXCEPTION_STUB(loc, label)					\
436	. = interrupt_base_book3e + loc;				\
437	nop;	/* To make debug interrupts happy */			\
438	b	exc_##label##_book3e;
439
440#define ACK_NONE(r)
441#define ACK_DEC(r)							\
442	lis	r,TSR_DIS@h;						\
443	mtspr	SPRN_TSR,r
444#define ACK_FIT(r)							\
445	lis	r,TSR_FIS@h;						\
446	mtspr	SPRN_TSR,r
447
448/* Used by asynchronous interrupt that may happen in the idle loop.
449 *
450 * This check if the thread was in the idle loop, and if yes, returns
451 * to the caller rather than the PC. This is to avoid a race if
452 * interrupts happen before the wait instruction.
453 */
454#define CHECK_NAPPING()							\
455	ld	r11, PACA_THREAD_INFO(r13);				\
456	ld	r10,TI_LOCAL_FLAGS(r11);				\
457	andi.	r9,r10,_TLF_NAPPING;					\
458	beq+	1f;							\
459	ld	r8,_LINK(r1);						\
460	rlwinm	r7,r10,0,~_TLF_NAPPING;					\
461	std	r8,_NIP(r1);						\
462	std	r7,TI_LOCAL_FLAGS(r11);					\
4631:
464
465
466#define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr, ack)		\
467	START_EXCEPTION(label);						\
468	NORMAL_EXCEPTION_PROLOG(trapnum, intnum, PROLOG_ADDITION_MASKABLE)\
469	EXCEPTION_COMMON(trapnum)					\
470	ack(r8);							\
471	CHECK_NAPPING();						\
472	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
473	bl	hdlr;							\
474	b	interrupt_return
475
476/* This value is used to mark exception frames on the stack. */
477	.section	".toc","aw"
478exception_marker:
479	.tc	ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
480
481
482/*
483 * And here we have the exception vectors !
484 */
485
486	.text
487	.balign	0x1000
488	.globl interrupt_base_book3e
489interrupt_base_book3e:					/* fake trap */
490	EXCEPTION_STUB(0x000, machine_check)
491	EXCEPTION_STUB(0x020, critical_input)		/* 0x0100 */
492	EXCEPTION_STUB(0x040, debug_crit)		/* 0x0d00 */
493	EXCEPTION_STUB(0x060, data_storage)		/* 0x0300 */
494	EXCEPTION_STUB(0x080, instruction_storage)	/* 0x0400 */
495	EXCEPTION_STUB(0x0a0, external_input)		/* 0x0500 */
496	EXCEPTION_STUB(0x0c0, alignment)		/* 0x0600 */
497	EXCEPTION_STUB(0x0e0, program)			/* 0x0700 */
498	EXCEPTION_STUB(0x100, fp_unavailable)		/* 0x0800 */
499	EXCEPTION_STUB(0x120, system_call)		/* 0x0c00 */
500	EXCEPTION_STUB(0x140, ap_unavailable)		/* 0x0f20 */
501	EXCEPTION_STUB(0x160, decrementer)		/* 0x0900 */
502	EXCEPTION_STUB(0x180, fixed_interval)		/* 0x0980 */
503	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
504	EXCEPTION_STUB(0x1c0, data_tlb_miss)
505	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
506	EXCEPTION_STUB(0x200, altivec_unavailable)
507	EXCEPTION_STUB(0x220, altivec_assist)
508	EXCEPTION_STUB(0x260, perfmon)
509	EXCEPTION_STUB(0x280, doorbell)
510	EXCEPTION_STUB(0x2a0, doorbell_crit)
511	EXCEPTION_STUB(0x2c0, guest_doorbell)
512	EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
513	EXCEPTION_STUB(0x300, hypercall)
514	EXCEPTION_STUB(0x320, ehpriv)
515	EXCEPTION_STUB(0x340, lrat_error)
516
517	.globl __end_interrupts
518__end_interrupts:
519
520/* Critical Input Interrupt */
521	START_EXCEPTION(critical_input);
522	CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL,
523			      PROLOG_ADDITION_NONE)
524	EXCEPTION_COMMON_CRIT(0x100)
525	bl	special_reg_save
526	CHECK_NAPPING();
527	addi	r3,r1,STACK_FRAME_OVERHEAD
528	bl	unknown_nmi_exception
529	b	ret_from_crit_except
530
531/* Machine Check Interrupt */
532	START_EXCEPTION(machine_check);
533	MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK,
534			    PROLOG_ADDITION_NONE)
535	EXCEPTION_COMMON_MC(0x000)
536	bl	special_reg_save
537	CHECK_NAPPING();
538	addi	r3,r1,STACK_FRAME_OVERHEAD
539	bl	machine_check_exception
540	b	ret_from_mc_except
541
542/* Data Storage Interrupt */
543	START_EXCEPTION(data_storage)
544	NORMAL_EXCEPTION_PROLOG(0x300, BOOKE_INTERRUPT_DATA_STORAGE,
545				PROLOG_ADDITION_2REGS)
546	mfspr	r14,SPRN_DEAR
547	mfspr	r15,SPRN_ESR
548	std	r14,_DEAR(r1)
549	std	r15,_ESR(r1)
550	ld	r14,PACA_EXGEN+EX_R14(r13)
551	ld	r15,PACA_EXGEN+EX_R15(r13)
552	EXCEPTION_COMMON(0x300)
553	b	storage_fault_common
554
555/* Instruction Storage Interrupt */
556	START_EXCEPTION(instruction_storage);
557	NORMAL_EXCEPTION_PROLOG(0x400, BOOKE_INTERRUPT_INST_STORAGE,
558				PROLOG_ADDITION_2REGS)
559	li	r15,0
560	mr	r14,r10
561	std	r14,_DEAR(r1)
562	std	r15,_ESR(r1)
563	ld	r14,PACA_EXGEN+EX_R14(r13)
564	ld	r15,PACA_EXGEN+EX_R15(r13)
565	EXCEPTION_COMMON(0x400)
566	b	storage_fault_common
567
568/* External Input Interrupt */
569	MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL,
570			   external_input, do_IRQ, ACK_NONE)
571
572/* Alignment */
573	START_EXCEPTION(alignment);
574	NORMAL_EXCEPTION_PROLOG(0x600, BOOKE_INTERRUPT_ALIGNMENT,
575				PROLOG_ADDITION_2REGS)
576	mfspr	r14,SPRN_DEAR
577	mfspr	r15,SPRN_ESR
578	std	r14,_DEAR(r1)
579	std	r15,_ESR(r1)
580	ld	r14,PACA_EXGEN+EX_R14(r13)
581	ld	r15,PACA_EXGEN+EX_R15(r13)
582	EXCEPTION_COMMON(0x600)
583	b	alignment_more	/* no room, go out of line */
584
585/* Program Interrupt */
586	START_EXCEPTION(program);
587	NORMAL_EXCEPTION_PROLOG(0x700, BOOKE_INTERRUPT_PROGRAM,
588				PROLOG_ADDITION_1REG)
589	mfspr	r14,SPRN_ESR
590	std	r14,_ESR(r1)
591	ld	r14,PACA_EXGEN+EX_R14(r13)
592	EXCEPTION_COMMON(0x700)
593	addi	r3,r1,STACK_FRAME_OVERHEAD
594	bl	program_check_exception
595	REST_NVGPRS(r1)
596	b	interrupt_return
597
598/* Floating Point Unavailable Interrupt */
599	START_EXCEPTION(fp_unavailable);
600	NORMAL_EXCEPTION_PROLOG(0x800, BOOKE_INTERRUPT_FP_UNAVAIL,
601				PROLOG_ADDITION_NONE)
602	/* we can probably do a shorter exception entry for that one... */
603	EXCEPTION_COMMON(0x800)
604	ld	r12,_MSR(r1)
605	andi.	r0,r12,MSR_PR;
606	beq-	1f
607	bl	load_up_fpu
608	b	fast_interrupt_return
6091:	addi	r3,r1,STACK_FRAME_OVERHEAD
610	bl	kernel_fp_unavailable_exception
611	b	interrupt_return
612
613/* Altivec Unavailable Interrupt */
614	START_EXCEPTION(altivec_unavailable);
615	NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_ALTIVEC_UNAVAIL,
616				PROLOG_ADDITION_NONE)
617	/* we can probably do a shorter exception entry for that one... */
618	EXCEPTION_COMMON(0x200)
619#ifdef CONFIG_ALTIVEC
620BEGIN_FTR_SECTION
621	ld	r12,_MSR(r1)
622	andi.	r0,r12,MSR_PR;
623	beq-	1f
624	bl	load_up_altivec
625	b	fast_interrupt_return
6261:
627END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
628#endif
629	addi	r3,r1,STACK_FRAME_OVERHEAD
630	bl	altivec_unavailable_exception
631	b	interrupt_return
632
633/* AltiVec Assist */
634	START_EXCEPTION(altivec_assist);
635	NORMAL_EXCEPTION_PROLOG(0x220,
636				BOOKE_INTERRUPT_ALTIVEC_ASSIST,
637				PROLOG_ADDITION_NONE)
638	EXCEPTION_COMMON(0x220)
639	addi	r3,r1,STACK_FRAME_OVERHEAD
640#ifdef CONFIG_ALTIVEC
641BEGIN_FTR_SECTION
642	bl	altivec_assist_exception
643END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
644	REST_NVGPRS(r1)
645#else
646	bl	unknown_exception
647#endif
648	b	interrupt_return
649
650
651/* Decrementer Interrupt */
652	MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER,
653			   decrementer, timer_interrupt, ACK_DEC)
654
655/* Fixed Interval Timer Interrupt */
656	MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT,
657			   fixed_interval, unknown_exception, ACK_FIT)
658
659/* Watchdog Timer Interrupt */
660	START_EXCEPTION(watchdog);
661	CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG,
662			      PROLOG_ADDITION_NONE)
663	EXCEPTION_COMMON_CRIT(0x9f0)
664	bl	special_reg_save
665	CHECK_NAPPING();
666	addi	r3,r1,STACK_FRAME_OVERHEAD
667#ifdef CONFIG_BOOKE_WDT
668	bl	WatchdogException
669#else
670	bl	unknown_nmi_exception
671#endif
672	b	ret_from_crit_except
673
674/* System Call Interrupt */
675	START_EXCEPTION(system_call)
676	mr	r9,r13			/* keep a copy of userland r13 */
677	mfspr	r11,SPRN_SRR0		/* get return address */
678	mfspr	r12,SPRN_SRR1		/* get previous MSR */
679	mfspr	r13,SPRN_SPRG_PACA	/* get our PACA */
680	b	system_call_common
681
682/* Auxiliary Processor Unavailable Interrupt */
683	START_EXCEPTION(ap_unavailable);
684	NORMAL_EXCEPTION_PROLOG(0xf20, BOOKE_INTERRUPT_AP_UNAVAIL,
685				PROLOG_ADDITION_NONE)
686	EXCEPTION_COMMON(0xf20)
687	addi	r3,r1,STACK_FRAME_OVERHEAD
688	bl	unknown_exception
689	b	interrupt_return
690
691/* Debug exception as a critical interrupt*/
692	START_EXCEPTION(debug_crit);
693	CRIT_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
694			      PROLOG_ADDITION_2REGS)
695
696	/*
697	 * If there is a single step or branch-taken exception in an
698	 * exception entry sequence, it was probably meant to apply to
699	 * the code where the exception occurred (since exception entry
700	 * doesn't turn off DE automatically).  We simulate the effect
701	 * of turning off DE on entry to an exception handler by turning
702	 * off DE in the CSRR1 value and clearing the debug status.
703	 */
704
705	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
706	andis.	r15,r14,(DBSR_IC|DBSR_BT)@h
707	beq+	1f
708
709#ifdef CONFIG_RELOCATABLE
710	ld	r15,PACATOC(r13)
711	ld	r14,interrupt_base_book3e@got(r15)
712	ld	r15,__end_interrupts@got(r15)
713	cmpld	cr0,r10,r14
714	cmpld	cr1,r10,r15
715#else
716	LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e)
717	cmpld	cr0, r10, r14
718	LOAD_REG_IMMEDIATE_SYM(r14, r15, __end_interrupts)
719	cmpld	cr1, r10, r14
720#endif
721	blt+	cr0,1f
722	bge+	cr1,1f
723
724	/* here it looks like we got an inappropriate debug exception. */
725	lis	r14,(DBSR_IC|DBSR_BT)@h		/* clear the event */
726	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the CSRR1 value */
727	mtspr	SPRN_DBSR,r14
728	mtspr	SPRN_CSRR1,r11
729	lwz	r10,PACA_EXCRIT+EX_CR(r13)	/* restore registers */
730	ld	r1,PACA_EXCRIT+EX_R1(r13)
731	ld	r14,PACA_EXCRIT+EX_R14(r13)
732	ld	r15,PACA_EXCRIT+EX_R15(r13)
733	mtcr	r10
734	ld	r10,PACA_EXCRIT+EX_R10(r13)	/* restore registers */
735	ld	r11,PACA_EXCRIT+EX_R11(r13)
736	mfspr	r13,SPRN_SPRG_CRIT_SCRATCH
737	rfci
738
739	/* Normal debug exception */
740	/* XXX We only handle coming from userspace for now since we can't
741	 *     quite save properly an interrupted kernel state yet
742	 */
7431:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
744	beq	kernel_dbg_exc;		/* if from kernel mode */
745
746	/* Now we mash up things to make it look like we are coming on a
747	 * normal exception
748	 */
749	mfspr	r14,SPRN_DBSR
750	std	r14,_DSISR(r1)
751	ld	r14,PACA_EXCRIT+EX_R14(r13)
752	ld	r15,PACA_EXCRIT+EX_R15(r13)
753	EXCEPTION_COMMON_CRIT(0xd00)
754	addi	r3,r1,STACK_FRAME_OVERHEAD
755	bl	DebugException
756	REST_NVGPRS(r1)
757	b	interrupt_return
758
759kernel_dbg_exc:
760	b	.	/* NYI */
761
762/* Debug exception as a debug interrupt*/
763	START_EXCEPTION(debug_debug);
764	DBG_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG,
765						 PROLOG_ADDITION_2REGS)
766
767	/*
768	 * If there is a single step or branch-taken exception in an
769	 * exception entry sequence, it was probably meant to apply to
770	 * the code where the exception occurred (since exception entry
771	 * doesn't turn off DE automatically).  We simulate the effect
772	 * of turning off DE on entry to an exception handler by turning
773	 * off DE in the DSRR1 value and clearing the debug status.
774	 */
775
776	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
777	andis.	r15,r14,(DBSR_IC|DBSR_BT)@h
778	beq+	1f
779
780#ifdef CONFIG_RELOCATABLE
781	ld	r15,PACATOC(r13)
782	ld	r14,interrupt_base_book3e@got(r15)
783	ld	r15,__end_interrupts@got(r15)
784	cmpld	cr0,r10,r14
785	cmpld	cr1,r10,r15
786#else
787	LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e)
788	cmpld	cr0, r10, r14
789	LOAD_REG_IMMEDIATE_SYM(r14, r15,__end_interrupts)
790	cmpld	cr1, r10, r14
791#endif
792	blt+	cr0,1f
793	bge+	cr1,1f
794
795	/* here it looks like we got an inappropriate debug exception. */
796	lis	r14,(DBSR_IC|DBSR_BT)@h		/* clear the event */
797	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the DSRR1 value */
798	mtspr	SPRN_DBSR,r14
799	mtspr	SPRN_DSRR1,r11
800	lwz	r10,PACA_EXDBG+EX_CR(r13)	/* restore registers */
801	ld	r1,PACA_EXDBG+EX_R1(r13)
802	ld	r14,PACA_EXDBG+EX_R14(r13)
803	ld	r15,PACA_EXDBG+EX_R15(r13)
804	mtcr	r10
805	ld	r10,PACA_EXDBG+EX_R10(r13)	/* restore registers */
806	ld	r11,PACA_EXDBG+EX_R11(r13)
807	mfspr	r13,SPRN_SPRG_DBG_SCRATCH
808	rfdi
809
810	/* Normal debug exception */
811	/* XXX We only handle coming from userspace for now since we can't
812	 *     quite save properly an interrupted kernel state yet
813	 */
8141:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
815	beq	kernel_dbg_exc;		/* if from kernel mode */
816
817	/* Now we mash up things to make it look like we are coming on a
818	 * normal exception
819	 */
820	mfspr	r14,SPRN_DBSR
821	std	r14,_DSISR(r1)
822	ld	r14,PACA_EXDBG+EX_R14(r13)
823	ld	r15,PACA_EXDBG+EX_R15(r13)
824	EXCEPTION_COMMON_DBG(0xd08)
825	addi	r3,r1,STACK_FRAME_OVERHEAD
826	bl	DebugException
827	REST_NVGPRS(r1)
828	b	interrupt_return
829
830	START_EXCEPTION(perfmon);
831	NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
832				PROLOG_ADDITION_NONE)
833	EXCEPTION_COMMON(0x260)
834	CHECK_NAPPING()
835	addi	r3,r1,STACK_FRAME_OVERHEAD
836	bl	performance_monitor_exception
837	b	interrupt_return
838
839/* Doorbell interrupt */
840	MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
841			   doorbell, doorbell_exception, ACK_NONE)
842
843/* Doorbell critical Interrupt */
844	START_EXCEPTION(doorbell_crit);
845	CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL,
846			      PROLOG_ADDITION_NONE)
847	EXCEPTION_COMMON_CRIT(0x2a0)
848	bl	special_reg_save
849	CHECK_NAPPING();
850	addi	r3,r1,STACK_FRAME_OVERHEAD
851	bl	unknown_nmi_exception
852	b	ret_from_crit_except
853
854/*
855 *	Guest doorbell interrupt
856 *	This general exception use GSRRx save/restore registers
857 */
858	START_EXCEPTION(guest_doorbell);
859	GDBELL_EXCEPTION_PROLOG(0x2c0, BOOKE_INTERRUPT_GUEST_DBELL,
860			        PROLOG_ADDITION_NONE)
861	EXCEPTION_COMMON(0x2c0)
862	addi	r3,r1,STACK_FRAME_OVERHEAD
863	bl	unknown_exception
864	b	interrupt_return
865
866/* Guest Doorbell critical Interrupt */
867	START_EXCEPTION(guest_doorbell_crit);
868	CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT,
869			      PROLOG_ADDITION_NONE)
870	EXCEPTION_COMMON_CRIT(0x2e0)
871	bl	special_reg_save
872	CHECK_NAPPING();
873	addi	r3,r1,STACK_FRAME_OVERHEAD
874	bl	unknown_nmi_exception
875	b	ret_from_crit_except
876
877/* Hypervisor call */
878	START_EXCEPTION(hypercall);
879	NORMAL_EXCEPTION_PROLOG(0x310, BOOKE_INTERRUPT_HV_SYSCALL,
880			        PROLOG_ADDITION_NONE)
881	EXCEPTION_COMMON(0x310)
882	addi	r3,r1,STACK_FRAME_OVERHEAD
883	bl	unknown_exception
884	b	interrupt_return
885
886/* Embedded Hypervisor priviledged  */
887	START_EXCEPTION(ehpriv);
888	NORMAL_EXCEPTION_PROLOG(0x320, BOOKE_INTERRUPT_HV_PRIV,
889			        PROLOG_ADDITION_NONE)
890	EXCEPTION_COMMON(0x320)
891	addi	r3,r1,STACK_FRAME_OVERHEAD
892	bl	unknown_exception
893	b	interrupt_return
894
895/* LRAT Error interrupt */
896	START_EXCEPTION(lrat_error);
897	NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR,
898			        PROLOG_ADDITION_NONE)
899	EXCEPTION_COMMON(0x340)
900	addi	r3,r1,STACK_FRAME_OVERHEAD
901	bl	unknown_exception
902	b	interrupt_return
903
904.macro SEARCH_RESTART_TABLE
905#ifdef CONFIG_RELOCATABLE
906	ld	r11,PACATOC(r13)
907	ld	r14,__start___restart_table@got(r11)
908	ld	r15,__stop___restart_table@got(r11)
909#else
910	LOAD_REG_IMMEDIATE_SYM(r14, r11, __start___restart_table)
911	LOAD_REG_IMMEDIATE_SYM(r15, r11, __stop___restart_table)
912#endif
913300:
914	cmpd	r14,r15
915	beq	302f
916	ld	r11,0(r14)
917	cmpld	r10,r11
918	blt	301f
919	ld	r11,8(r14)
920	cmpld	r10,r11
921	bge	301f
922	ld	r11,16(r14)
923	b	303f
924301:
925	addi	r14,r14,24
926	b	300b
927302:
928	li	r11,0
929303:
930.endm
931
932/*
933 * An interrupt came in while soft-disabled; We mark paca->irq_happened
934 * accordingly and if the interrupt is level sensitive, we hard disable
935 * hard disable (full_mask) corresponds to PACA_IRQ_MUST_HARD_MASK, so
936 * keep these in synch.
937 */
938
939.macro masked_interrupt_book3e paca_irq full_mask
940	std	r14,PACA_EXGEN+EX_R14(r13)
941	std	r15,PACA_EXGEN+EX_R15(r13)
942
943	lbz	r10,PACAIRQHAPPENED(r13)
944	.if \full_mask == 1
945	ori	r10,r10,\paca_irq | PACA_IRQ_HARD_DIS
946	.else
947	ori	r10,r10,\paca_irq
948	.endif
949	stb	r10,PACAIRQHAPPENED(r13)
950
951	.if \full_mask == 1
952	xori	r11,r11,MSR_EE		/* clear MSR_EE */
953	mtspr	SPRN_SRR1,r11
954	.endif
955
956	mfspr	r10,SPRN_SRR0
957	SEARCH_RESTART_TABLE
958	cmpdi	r11,0
959	beq	1f
960	mtspr	SPRN_SRR0,r11		/* return to restart address */
9611:
962
963	lwz	r11,PACA_EXGEN+EX_CR(r13)
964	mtcr	r11
965	ld	r10,PACA_EXGEN+EX_R10(r13)
966	ld	r11,PACA_EXGEN+EX_R11(r13)
967	ld	r14,PACA_EXGEN+EX_R14(r13)
968	ld	r15,PACA_EXGEN+EX_R15(r13)
969	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
970	rfi
971	b	.
972.endm
973
974masked_interrupt_book3e_0x500:
975	masked_interrupt_book3e PACA_IRQ_EE 1
976
977masked_interrupt_book3e_0x900:
978	ACK_DEC(r10);
979	masked_interrupt_book3e PACA_IRQ_DEC 0
980
981masked_interrupt_book3e_0x980:
982	ACK_FIT(r10);
983	masked_interrupt_book3e PACA_IRQ_DEC 0
984
985masked_interrupt_book3e_0x280:
986masked_interrupt_book3e_0x2c0:
987	masked_interrupt_book3e PACA_IRQ_DBELL 0
988
989/*
990 * This is called from 0x300 and 0x400 handlers after the prologs with
991 * r14 and r15 containing the fault address and error code, with the
992 * original values stashed away in the PACA
993 */
994storage_fault_common:
995	addi	r3,r1,STACK_FRAME_OVERHEAD
996	bl	do_page_fault
997	b	interrupt_return
998
999/*
1000 * Alignment exception doesn't fit entirely in the 0x100 bytes so it
1001 * continues here.
1002 */
1003alignment_more:
1004	addi	r3,r1,STACK_FRAME_OVERHEAD
1005	bl	alignment_exception
1006	REST_NVGPRS(r1)
1007	b	interrupt_return
1008
1009/*
1010 * Trampolines used when spotting a bad kernel stack pointer in
1011 * the exception entry code.
1012 *
1013 * TODO: move some bits like SRR0 read to trampoline, pass PACA
1014 * index around, etc... to handle crit & mcheck
1015 */
1016BAD_STACK_TRAMPOLINE(0x000)
1017BAD_STACK_TRAMPOLINE(0x100)
1018BAD_STACK_TRAMPOLINE(0x200)
1019BAD_STACK_TRAMPOLINE(0x220)
1020BAD_STACK_TRAMPOLINE(0x260)
1021BAD_STACK_TRAMPOLINE(0x280)
1022BAD_STACK_TRAMPOLINE(0x2a0)
1023BAD_STACK_TRAMPOLINE(0x2c0)
1024BAD_STACK_TRAMPOLINE(0x2e0)
1025BAD_STACK_TRAMPOLINE(0x300)
1026BAD_STACK_TRAMPOLINE(0x310)
1027BAD_STACK_TRAMPOLINE(0x320)
1028BAD_STACK_TRAMPOLINE(0x340)
1029BAD_STACK_TRAMPOLINE(0x400)
1030BAD_STACK_TRAMPOLINE(0x500)
1031BAD_STACK_TRAMPOLINE(0x600)
1032BAD_STACK_TRAMPOLINE(0x700)
1033BAD_STACK_TRAMPOLINE(0x800)
1034BAD_STACK_TRAMPOLINE(0x900)
1035BAD_STACK_TRAMPOLINE(0x980)
1036BAD_STACK_TRAMPOLINE(0x9f0)
1037BAD_STACK_TRAMPOLINE(0xa00)
1038BAD_STACK_TRAMPOLINE(0xb00)
1039BAD_STACK_TRAMPOLINE(0xc00)
1040BAD_STACK_TRAMPOLINE(0xd00)
1041BAD_STACK_TRAMPOLINE(0xd08)
1042BAD_STACK_TRAMPOLINE(0xe00)
1043BAD_STACK_TRAMPOLINE(0xf00)
1044BAD_STACK_TRAMPOLINE(0xf20)
1045
1046	.globl	bad_stack_book3e
1047bad_stack_book3e:
1048	/* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
1049	mfspr	r10,SPRN_SRR0;		  /* read SRR0 before touching stack */
1050	ld	r1,PACAEMERGSP(r13)
1051	subi	r1,r1,64+INT_FRAME_SIZE
1052	std	r10,_NIP(r1)
1053	std	r11,_MSR(r1)
1054	ld	r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
1055	lwz	r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
1056	std	r10,GPR1(r1)
1057	std	r11,_CCR(r1)
1058	mfspr	r10,SPRN_DEAR
1059	mfspr	r11,SPRN_ESR
1060	std	r10,_DEAR(r1)
1061	std	r11,_ESR(r1)
1062	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
1063	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
1064	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
1065	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
1066	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
1067	ld	r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */		    \
1068	ld	r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */		    \
1069	mfspr	r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
1070	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
1071	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
1072	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
1073	std	r5,GPR13(r1);		/* save it to stackframe */	    \
1074	mflr	r10
1075	mfctr	r11
1076	mfxer	r12
1077	std	r10,_LINK(r1)
1078	std	r11,_CTR(r1)
1079	std	r12,_XER(r1)
1080	SAVE_10GPRS(14,r1)
1081	SAVE_8GPRS(24,r1)
1082	lhz	r12,PACA_TRAP_SAVE(r13)
1083	std	r12,_TRAP(r1)
1084	addi	r11,r1,INT_FRAME_SIZE
1085	std	r11,0(r1)
1086	li	r12,0
1087	std	r12,0(r11)
1088	ld	r2,PACATOC(r13)
10891:	addi	r3,r1,STACK_FRAME_OVERHEAD
1090	bl	kernel_bad_stack
1091	b	1b
1092
1093/*
1094 * Setup the initial TLB for a core. This current implementation
1095 * assume that whatever we are running off will not conflict with
1096 * the new mapping at PAGE_OFFSET.
1097 */
1098_GLOBAL(initial_tlb_book3e)
1099
1100	/* Look for the first TLB with IPROT set */
1101	mfspr	r4,SPRN_TLB0CFG
1102	andi.	r3,r4,TLBnCFG_IPROT
1103	lis	r3,MAS0_TLBSEL(0)@h
1104	bne	found_iprot
1105
1106	mfspr	r4,SPRN_TLB1CFG
1107	andi.	r3,r4,TLBnCFG_IPROT
1108	lis	r3,MAS0_TLBSEL(1)@h
1109	bne	found_iprot
1110
1111	mfspr	r4,SPRN_TLB2CFG
1112	andi.	r3,r4,TLBnCFG_IPROT
1113	lis	r3,MAS0_TLBSEL(2)@h
1114	bne	found_iprot
1115
1116	lis	r3,MAS0_TLBSEL(3)@h
1117	mfspr	r4,SPRN_TLB3CFG
1118	/* fall through */
1119
1120found_iprot:
1121	andi.	r5,r4,TLBnCFG_HES
1122	bne	have_hes
1123
1124	mflr	r8				/* save LR */
1125/* 1. Find the index of the entry we're executing in
1126 *
1127 * r3 = MAS0_TLBSEL (for the iprot array)
1128 * r4 = SPRN_TLBnCFG
1129 */
1130	bcl	20,31,$+4			/* Find our address */
1131invstr:	mflr	r6				/* Make it accessible */
1132	mfmsr	r7
1133	rlwinm	r5,r7,27,31,31			/* extract MSR[IS] */
1134	mfspr	r7,SPRN_PID
1135	slwi	r7,r7,16
1136	or	r7,r7,r5
1137	mtspr	SPRN_MAS6,r7
1138	tlbsx	0,r6				/* search MSR[IS], SPID=PID */
1139
1140	mfspr	r3,SPRN_MAS0
1141	rlwinm	r5,r3,16,20,31			/* Extract MAS0(Entry) */
1142
1143	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
1144	oris	r7,r7,MAS1_IPROT@h
1145	mtspr	SPRN_MAS1,r7
1146	tlbwe
1147
1148/* 2. Invalidate all entries except the entry we're executing in
1149 *
1150 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1151 * r4 = SPRN_TLBnCFG
1152 * r5 = ESEL of entry we are running in
1153 */
1154	andi.	r4,r4,TLBnCFG_N_ENTRY		/* Extract # entries */
1155	li	r6,0				/* Set Entry counter to 0 */
11561:	mr	r7,r3				/* Set MAS0(TLBSEL) */
1157	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
1158	mtspr	SPRN_MAS0,r7
1159	tlbre
1160	mfspr	r7,SPRN_MAS1
1161	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
1162	cmpw	r5,r6
1163	beq	skpinv				/* Dont update the current execution TLB */
1164	mtspr	SPRN_MAS1,r7
1165	tlbwe
1166	isync
1167skpinv:	addi	r6,r6,1				/* Increment */
1168	cmpw	r6,r4				/* Are we done? */
1169	bne	1b				/* If not, repeat */
1170
1171	/* Invalidate all TLBs */
1172	PPC_TLBILX_ALL(0,R0)
1173	sync
1174	isync
1175
1176/* 3. Setup a temp mapping and jump to it
1177 *
1178 * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1179 * r5 = ESEL of entry we are running in
1180 */
1181	andi.	r7,r5,0x1	/* Find an entry not used and is non-zero */
1182	addi	r7,r7,0x1
1183	mr	r4,r3		/* Set MAS0(TLBSEL) = 1 */
1184	mtspr	SPRN_MAS0,r4
1185	tlbre
1186
1187	rlwimi	r4,r7,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r7) */
1188	mtspr	SPRN_MAS0,r4
1189
1190	mfspr	r7,SPRN_MAS1
1191	xori	r6,r7,MAS1_TS		/* Setup TMP mapping in the other Address space */
1192	mtspr	SPRN_MAS1,r6
1193
1194	tlbwe
1195
1196	mfmsr	r6
1197	xori	r6,r6,MSR_IS
1198	mtspr	SPRN_SRR1,r6
1199	bcl	20,31,$+4	/* Find our address */
12001:	mflr	r6
1201	addi	r6,r6,(2f - 1b)
1202	mtspr	SPRN_SRR0,r6
1203	rfi
12042:
1205
1206/* 4. Clear out PIDs & Search info
1207 *
1208 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1209 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1210 * r5 = MAS3
1211 */
1212	li	r6,0
1213	mtspr   SPRN_MAS6,r6
1214	mtspr	SPRN_PID,r6
1215
1216/* 5. Invalidate mapping we started in
1217 *
1218 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1219 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1220 * r5 = MAS3
1221 */
1222	mtspr	SPRN_MAS0,r3
1223	tlbre
1224	mfspr	r6,SPRN_MAS1
1225	rlwinm	r6,r6,0,2,31	/* clear IPROT and VALID */
1226	mtspr	SPRN_MAS1,r6
1227	tlbwe
1228	sync
1229	isync
1230
1231/* 6. Setup KERNELBASE mapping in TLB[0]
1232 *
1233 * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
1234 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1235 * r5 = MAS3
1236 */
1237	rlwinm	r3,r3,0,16,3	/* clear ESEL */
1238	mtspr	SPRN_MAS0,r3
1239	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
1240	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
1241	mtspr	SPRN_MAS1,r6
1242
1243	LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | MAS2_M_IF_NEEDED)
1244	mtspr	SPRN_MAS2,r6
1245
1246	rlwinm	r5,r5,0,0,25
1247	ori	r5,r5,MAS3_SR | MAS3_SW | MAS3_SX
1248	mtspr	SPRN_MAS3,r5
1249	li	r5,-1
1250	rlwinm	r5,r5,0,0,25
1251
1252	tlbwe
1253
1254/* 7. Jump to KERNELBASE mapping
1255 *
1256 * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
1257 */
1258	/* Now we branch the new virtual address mapped by this entry */
1259	bcl	20,31,$+4	/* Find our address */
12601:	mflr	r6
1261	addi	r6,r6,(2f - 1b)
1262	tovirt(r6,r6)
1263	lis	r7,MSR_KERNEL@h
1264	ori	r7,r7,MSR_KERNEL@l
1265	mtspr	SPRN_SRR0,r6
1266	mtspr	SPRN_SRR1,r7
1267	rfi				/* start execution out of TLB1[0] entry */
12682:
1269
1270/* 8. Clear out the temp mapping
1271 *
1272 * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in
1273 */
1274	mtspr	SPRN_MAS0,r4
1275	tlbre
1276	mfspr	r5,SPRN_MAS1
1277	rlwinm	r5,r5,0,2,31	/* clear IPROT and VALID */
1278	mtspr	SPRN_MAS1,r5
1279	tlbwe
1280	sync
1281	isync
1282
1283	/* We translate LR and return */
1284	tovirt(r8,r8)
1285	mtlr	r8
1286	blr
1287
1288have_hes:
1289	/* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
1290	 * kernel linear mapping. We also set MAS8 once for all here though
1291	 * that will have to be made dependent on whether we are running under
1292	 * a hypervisor I suppose.
1293	 */
1294
1295	/* BEWARE, MAGIC
1296	 * This code is called as an ordinary function on the boot CPU. But to
1297	 * avoid duplication, this code is also used in SCOM bringup of
1298	 * secondary CPUs. We read the code between the initial_tlb_code_start
1299	 * and initial_tlb_code_end labels one instruction at a time and RAM it
1300	 * into the new core via SCOM. That doesn't process branches, so there
1301	 * must be none between those two labels. It also means if this code
1302	 * ever takes any parameters, the SCOM code must also be updated to
1303	 * provide them.
1304	 */
1305	.globl a2_tlbinit_code_start
1306a2_tlbinit_code_start:
1307
1308	ori	r11,r3,MAS0_WQ_ALLWAYS
1309	oris	r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */
1310	mtspr	SPRN_MAS0,r11
1311	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
1312	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
1313	mtspr	SPRN_MAS1,r3
1314	LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
1315	mtspr	SPRN_MAS2,r3
1316	li	r3,MAS3_SR | MAS3_SW | MAS3_SX
1317	mtspr	SPRN_MAS7_MAS3,r3
1318	li	r3,0
1319	mtspr	SPRN_MAS8,r3
1320
1321	/* Write the TLB entry */
1322	tlbwe
1323
1324	.globl a2_tlbinit_after_linear_map
1325a2_tlbinit_after_linear_map:
1326
1327	/* Now we branch the new virtual address mapped by this entry */
1328#ifdef CONFIG_RELOCATABLE
1329	ld	r5,PACATOC(r13)
1330	ld	r3,1f@got(r5)
1331#else
1332	LOAD_REG_IMMEDIATE_SYM(r3, r5, 1f)
1333#endif
1334	mtctr	r3
1335	bctr
1336
13371:	/* We are now running at PAGE_OFFSET, clean the TLB of everything
1338	 * else (including IPROTed things left by firmware)
1339	 * r4 = TLBnCFG
1340	 * r3 = current address (more or less)
1341	 */
1342
1343	li	r5,0
1344	mtspr	SPRN_MAS6,r5
1345	tlbsx	0,r3
1346
1347	rlwinm	r9,r4,0,TLBnCFG_N_ENTRY
1348	rlwinm	r10,r4,8,0xff
1349	addi	r10,r10,-1	/* Get inner loop mask */
1350
1351	li	r3,1
1352
1353	mfspr	r5,SPRN_MAS1
1354	rlwinm	r5,r5,0,(~(MAS1_VALID|MAS1_IPROT))
1355
1356	mfspr	r6,SPRN_MAS2
1357	rldicr	r6,r6,0,51		/* Extract EPN */
1358
1359	mfspr	r7,SPRN_MAS0
1360	rlwinm	r7,r7,0,0xffff0fff	/* Clear HES and WQ */
1361
1362	rlwinm	r8,r7,16,0xfff		/* Extract ESEL */
1363
13642:	add	r4,r3,r8
1365	and	r4,r4,r10
1366
1367	rlwimi	r7,r4,16,MAS0_ESEL_MASK
1368
1369	mtspr	SPRN_MAS0,r7
1370	mtspr	SPRN_MAS1,r5
1371	mtspr	SPRN_MAS2,r6
1372	tlbwe
1373
1374	addi	r3,r3,1
1375	and.	r4,r3,r10
1376
1377	bne	3f
1378	addis	r6,r6,(1<<30)@h
13793:
1380	cmpw	r3,r9
1381	blt	2b
1382
1383	.globl  a2_tlbinit_after_iprot_flush
1384a2_tlbinit_after_iprot_flush:
1385
1386	PPC_TLBILX(0,0,R0)
1387	sync
1388	isync
1389
1390	.globl a2_tlbinit_code_end
1391a2_tlbinit_code_end:
1392
1393	/* We translate LR and return */
1394	mflr	r3
1395	tovirt(r3,r3)
1396	mtlr	r3
1397	blr
1398
1399/*
1400 * Main entry (boot CPU, thread 0)
1401 *
1402 * We enter here from head_64.S, possibly after the prom_init trampoline
1403 * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
1404 * mode. Anything else is as it was left by the bootloader
1405 *
1406 * Initial requirements of this port:
1407 *
1408 * - Kernel loaded at 0 physical
1409 * - A good lump of memory mapped 0:0 by UTLB entry 0
1410 * - MSR:IS & MSR:DS set to 0
1411 *
1412 * Note that some of the above requirements will be relaxed in the future
1413 * as the kernel becomes smarter at dealing with different initial conditions
1414 * but for now you have to be careful
1415 */
1416_GLOBAL(start_initialization_book3e)
1417	mflr	r28
1418
1419	/* First, we need to setup some initial TLBs to map the kernel
1420	 * text, data and bss at PAGE_OFFSET. We don't have a real mode
1421	 * and always use AS 0, so we just set it up to match our link
1422	 * address and never use 0 based addresses.
1423	 */
1424	bl	initial_tlb_book3e
1425
1426	/* Init global core bits */
1427	bl	init_core_book3e
1428
1429	/* Init per-thread bits */
1430	bl	init_thread_book3e
1431
1432	/* Return to common init code */
1433	tovirt(r28,r28)
1434	mtlr	r28
1435	blr
1436
1437
1438/*
1439 * Secondary core/processor entry
1440 *
1441 * This is entered for thread 0 of a secondary core, all other threads
1442 * are expected to be stopped. It's similar to start_initialization_book3e
1443 * except that it's generally entered from the holding loop in head_64.S
1444 * after CPUs have been gathered by Open Firmware.
1445 *
1446 * We assume we are in 32 bits mode running with whatever TLB entry was
1447 * set for us by the firmware or POR engine.
1448 */
1449_GLOBAL(book3e_secondary_core_init_tlb_set)
1450	li	r4,1
1451	b	generic_secondary_smp_init
1452
1453_GLOBAL(book3e_secondary_core_init)
1454	mflr	r28
1455
1456	/* Do we need to setup initial TLB entry ? */
1457	cmplwi	r4,0
1458	bne	2f
1459
1460	/* Setup TLB for this core */
1461	bl	initial_tlb_book3e
1462
1463	/* We can return from the above running at a different
1464	 * address, so recalculate r2 (TOC)
1465	 */
1466	bl	relative_toc
1467
1468	/* Init global core bits */
14692:	bl	init_core_book3e
1470
1471	/* Init per-thread bits */
14723:	bl	init_thread_book3e
1473
1474	/* Return to common init code at proper virtual address.
1475	 *
1476	 * Due to various previous assumptions, we know we entered this
1477	 * function at either the final PAGE_OFFSET mapping or using a
1478	 * 1:1 mapping at 0, so we don't bother doing a complicated check
1479	 * here, we just ensure the return address has the right top bits.
1480	 *
1481	 * Note that if we ever want to be smarter about where we can be
1482	 * started from, we have to be careful that by the time we reach
1483	 * the code below we may already be running at a different location
1484	 * than the one we were called from since initial_tlb_book3e can
1485	 * have moved us already.
1486	 */
1487	cmpdi	cr0,r28,0
1488	blt	1f
1489	lis	r3,PAGE_OFFSET@highest
1490	sldi	r3,r3,32
1491	or	r28,r28,r3
14921:	mtlr	r28
1493	blr
1494
1495_GLOBAL(book3e_secondary_thread_init)
1496	mflr	r28
1497	b	3b
1498
1499	.globl init_core_book3e
1500init_core_book3e:
1501	/* Establish the interrupt vector base */
1502	tovirt(r2,r2)
1503	LOAD_REG_ADDR(r3, interrupt_base_book3e)
1504	mtspr	SPRN_IVPR,r3
1505	sync
1506	blr
1507
1508init_thread_book3e:
1509	lis	r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
1510	mtspr	SPRN_EPCR,r3
1511
1512	/* Make sure interrupts are off */
1513	wrteei	0
1514
1515	/* disable all timers and clear out status */
1516	li	r3,0
1517	mtspr	SPRN_TCR,r3
1518	mfspr	r3,SPRN_TSR
1519	mtspr	SPRN_TSR,r3
1520
1521	blr
1522
1523_GLOBAL(__setup_base_ivors)
1524	SET_IVOR(0, 0x020) /* Critical Input */
1525	SET_IVOR(1, 0x000) /* Machine Check */
1526	SET_IVOR(2, 0x060) /* Data Storage */
1527	SET_IVOR(3, 0x080) /* Instruction Storage */
1528	SET_IVOR(4, 0x0a0) /* External Input */
1529	SET_IVOR(5, 0x0c0) /* Alignment */
1530	SET_IVOR(6, 0x0e0) /* Program */
1531	SET_IVOR(7, 0x100) /* FP Unavailable */
1532	SET_IVOR(8, 0x120) /* System Call */
1533	SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
1534	SET_IVOR(10, 0x160) /* Decrementer */
1535	SET_IVOR(11, 0x180) /* Fixed Interval Timer */
1536	SET_IVOR(12, 0x1a0) /* Watchdog Timer */
1537	SET_IVOR(13, 0x1c0) /* Data TLB Error */
1538	SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
1539	SET_IVOR(15, 0x040) /* Debug */
1540
1541	sync
1542
1543	blr
1544
1545_GLOBAL(setup_altivec_ivors)
1546	SET_IVOR(32, 0x200) /* AltiVec Unavailable */
1547	SET_IVOR(33, 0x220) /* AltiVec Assist */
1548	blr
1549
1550_GLOBAL(setup_perfmon_ivor)
1551	SET_IVOR(35, 0x260) /* Performance Monitor */
1552	blr
1553
1554_GLOBAL(setup_doorbell_ivors)
1555	SET_IVOR(36, 0x280) /* Processor Doorbell */
1556	SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
1557	blr
1558
1559_GLOBAL(setup_ehv_ivors)
1560	SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
1561	SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
1562	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
1563	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
1564	blr
1565
1566_GLOBAL(setup_lrat_ivor)
1567	SET_IVOR(42, 0x340) /* LRAT Error */
1568	blr
1569