xref: /openbmc/linux/arch/powerpc/kernel/crash_dump.c (revision acddaa55)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Routines for doing kexec-based kdump.
4  *
5  * Copyright (C) 2005, IBM Corp.
6  *
7  * Created by: Michael Ellerman
8  */
9 
10 #undef DEBUG
11 
12 #include <linux/crash_dump.h>
13 #include <linux/io.h>
14 #include <linux/memblock.h>
15 #include <asm/code-patching.h>
16 #include <asm/kdump.h>
17 #include <asm/prom.h>
18 #include <asm/firmware.h>
19 #include <linux/uaccess.h>
20 #include <asm/rtas.h>
21 #include <asm/inst.h>
22 
23 #ifdef DEBUG
24 #include <asm/udbg.h>
25 #define DBG(fmt...) udbg_printf(fmt)
26 #else
27 #define DBG(fmt...)
28 #endif
29 
30 #ifndef CONFIG_NONSTATIC_KERNEL
31 void __init reserve_kdump_trampoline(void)
32 {
33 	memblock_reserve(0, KDUMP_RESERVE_LIMIT);
34 }
35 
36 static void __init create_trampoline(unsigned long addr)
37 {
38 	struct ppc_inst *p = (struct ppc_inst *)addr;
39 
40 	/* The maximum range of a single instruction branch, is the current
41 	 * instruction's address + (32 MB - 4) bytes. For the trampoline we
42 	 * need to branch to current address + 32 MB. So we insert a nop at
43 	 * the trampoline address, then the next instruction (+ 4 bytes)
44 	 * does a branch to (32 MB - 4). The net effect is that when we
45 	 * branch to "addr" we jump to ("addr" + 32 MB). Although it requires
46 	 * two instructions it doesn't require any registers.
47 	 */
48 	patch_instruction(p, ppc_inst(PPC_INST_NOP));
49 	patch_branch((void *)p + 4, addr + PHYSICAL_START, 0);
50 }
51 
52 void __init setup_kdump_trampoline(void)
53 {
54 	unsigned long i;
55 
56 	DBG(" -> setup_kdump_trampoline()\n");
57 
58 	for (i = KDUMP_TRAMPOLINE_START; i < KDUMP_TRAMPOLINE_END; i += 8) {
59 		create_trampoline(i);
60 	}
61 
62 #ifdef CONFIG_PPC_PSERIES
63 	create_trampoline(__pa(system_reset_fwnmi) - PHYSICAL_START);
64 	create_trampoline(__pa(machine_check_fwnmi) - PHYSICAL_START);
65 #endif /* CONFIG_PPC_PSERIES */
66 
67 	DBG(" <- setup_kdump_trampoline()\n");
68 }
69 #endif /* CONFIG_NONSTATIC_KERNEL */
70 
71 static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize,
72                                unsigned long offset, int userbuf)
73 {
74 	if (userbuf) {
75 		if (copy_to_user((char __user *)buf, (vaddr + offset), csize))
76 			return -EFAULT;
77 	} else
78 		memcpy(buf, (vaddr + offset), csize);
79 
80 	return csize;
81 }
82 
83 /**
84  * copy_oldmem_page - copy one page from "oldmem"
85  * @pfn: page frame number to be copied
86  * @buf: target memory address for the copy; this can be in kernel address
87  *      space or user address space (see @userbuf)
88  * @csize: number of bytes to copy
89  * @offset: offset in bytes into the page (based on pfn) to begin the copy
90  * @userbuf: if set, @buf is in user address space, use copy_to_user(),
91  *      otherwise @buf is in kernel address space, use memcpy().
92  *
93  * Copy a page from "oldmem". For this page, there is no pte mapped
94  * in the current kernel. We stitch up a pte, similar to kmap_atomic.
95  */
96 ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
97 			size_t csize, unsigned long offset, int userbuf)
98 {
99 	void  *vaddr;
100 	phys_addr_t paddr;
101 
102 	if (!csize)
103 		return 0;
104 
105 	csize = min_t(size_t, csize, PAGE_SIZE);
106 	paddr = pfn << PAGE_SHIFT;
107 
108 	if (memblock_is_region_memory(paddr, csize)) {
109 		vaddr = __va(paddr);
110 		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
111 	} else {
112 		vaddr = ioremap_cache(paddr, PAGE_SIZE);
113 		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
114 		iounmap(vaddr);
115 	}
116 
117 	return csize;
118 }
119 
120 #ifdef CONFIG_PPC_RTAS
121 /*
122  * The crashkernel region will almost always overlap the RTAS region, so
123  * we have to be careful when shrinking the crashkernel region.
124  */
125 void crash_free_reserved_phys_range(unsigned long begin, unsigned long end)
126 {
127 	unsigned long addr;
128 	const __be32 *basep, *sizep;
129 	unsigned int rtas_start = 0, rtas_end = 0;
130 
131 	basep = of_get_property(rtas.dev, "linux,rtas-base", NULL);
132 	sizep = of_get_property(rtas.dev, "rtas-size", NULL);
133 
134 	if (basep && sizep) {
135 		rtas_start = be32_to_cpup(basep);
136 		rtas_end = rtas_start + be32_to_cpup(sizep);
137 	}
138 
139 	for (addr = begin; addr < end; addr += PAGE_SIZE) {
140 		/* Does this page overlap with the RTAS region? */
141 		if (addr <= rtas_end && ((addr + PAGE_SIZE) > rtas_start))
142 			continue;
143 
144 		free_reserved_page(pfn_to_page(addr >> PAGE_SHIFT));
145 	}
146 }
147 #endif
148