1 #ifndef _ASM_POWERPC_PTRACE_H 2 #define _ASM_POWERPC_PTRACE_H 3 4 /* 5 * Copyright (C) 2001 PPC64 Team, IBM Corp 6 * 7 * This struct defines the way the registers are stored on the 8 * kernel stack during a system call or other kernel entry. 9 * 10 * this should only contain volatile regs 11 * since we can keep non-volatile in the thread_struct 12 * should set this up when only volatiles are saved 13 * by intr code. 14 * 15 * Since this is going on the stack, *CARE MUST BE TAKEN* to insure 16 * that the overall structure is a multiple of 16 bytes in length. 17 * 18 * Note that the offsets of the fields in this struct correspond with 19 * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c. 20 * 21 * This program is free software; you can redistribute it and/or 22 * modify it under the terms of the GNU General Public License 23 * as published by the Free Software Foundation; either version 24 * 2 of the License, or (at your option) any later version. 25 */ 26 27 #ifndef __ASSEMBLY__ 28 29 struct pt_regs { 30 unsigned long gpr[32]; 31 unsigned long nip; 32 unsigned long msr; 33 unsigned long orig_gpr3; /* Used for restarting system calls */ 34 unsigned long ctr; 35 unsigned long link; 36 unsigned long xer; 37 unsigned long ccr; 38 #ifdef __powerpc64__ 39 unsigned long softe; /* Soft enabled/disabled */ 40 #else 41 unsigned long mq; /* 601 only (not used at present) */ 42 /* Used on APUS to hold IPL value. */ 43 #endif 44 unsigned long trap; /* Reason for being here */ 45 /* N.B. for critical exceptions on 4xx, the dar and dsisr 46 fields are overloaded to hold srr0 and srr1. */ 47 unsigned long dar; /* Fault registers */ 48 unsigned long dsisr; /* on 4xx/Book-E used for ESR */ 49 unsigned long result; /* Result of a system call */ 50 }; 51 52 #endif /* __ASSEMBLY__ */ 53 54 #ifdef __KERNEL__ 55 56 #ifdef __powerpc64__ 57 58 #define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ 59 #define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ 60 #define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) 61 #define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ 62 STACK_FRAME_OVERHEAD + 288) 63 #define STACK_FRAME_MARKER 12 64 65 /* Size of dummy stack frame allocated when calling signal handler. */ 66 #define __SIGNAL_FRAMESIZE 128 67 #define __SIGNAL_FRAMESIZE32 64 68 69 #else /* __powerpc64__ */ 70 71 #define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ 72 #define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ 73 #define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) 74 #define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) 75 #define STACK_FRAME_MARKER 2 76 77 /* Size of stack frame allocated when calling signal handler. */ 78 #define __SIGNAL_FRAMESIZE 64 79 80 #endif /* __powerpc64__ */ 81 82 #ifndef __ASSEMBLY__ 83 84 #define instruction_pointer(regs) ((regs)->nip) 85 #define user_stack_pointer(regs) ((regs)->gpr[1]) 86 #define regs_return_value(regs) ((regs)->gpr[3]) 87 88 #ifdef CONFIG_SMP 89 extern unsigned long profile_pc(struct pt_regs *regs); 90 #else 91 #define profile_pc(regs) instruction_pointer(regs) 92 #endif 93 94 #ifdef __powerpc64__ 95 #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) 96 #else 97 #define user_mode(regs) (((regs)->msr & MSR_PR) != 0) 98 #endif 99 100 #define force_successful_syscall_return() \ 101 do { \ 102 set_thread_flag(TIF_NOERROR); \ 103 } while(0) 104 105 struct task_struct; 106 extern unsigned long ptrace_get_reg(struct task_struct *task, int regno); 107 extern int ptrace_put_reg(struct task_struct *task, int regno, 108 unsigned long data); 109 110 /* 111 * We use the least-significant bit of the trap field to indicate 112 * whether we have saved the full set of registers, or only a 113 * partial set. A 1 there means the partial set. 114 * On 4xx we use the next bit to indicate whether the exception 115 * is a critical exception (1 means it is). 116 */ 117 #define FULL_REGS(regs) (((regs)->trap & 1) == 0) 118 #ifndef __powerpc64__ 119 #define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) 120 #define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) 121 #define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0) 122 #endif /* ! __powerpc64__ */ 123 #define TRAP(regs) ((regs)->trap & ~0xF) 124 #ifdef __powerpc64__ 125 #define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) 126 #else 127 #define CHECK_FULL_REGS(regs) \ 128 do { \ 129 if ((regs)->trap & 1) \ 130 printk(KERN_CRIT "%s: partial register set\n", __func__); \ 131 } while (0) 132 #endif /* __powerpc64__ */ 133 134 /* 135 * These are defined as per linux/ptrace.h, which see. 136 */ 137 #define arch_has_single_step() (1) 138 #define arch_has_block_step() (!cpu_has_feature(CPU_FTR_601)) 139 extern void user_enable_single_step(struct task_struct *); 140 extern void user_enable_block_step(struct task_struct *); 141 extern void user_disable_single_step(struct task_struct *); 142 143 #define ARCH_HAS_USER_SINGLE_STEP_INFO 144 145 #endif /* __ASSEMBLY__ */ 146 147 #endif /* __KERNEL__ */ 148 149 /* 150 * Offsets used by 'ptrace' system call interface. 151 * These can't be changed without breaking binary compatibility 152 * with MkLinux, etc. 153 */ 154 #define PT_R0 0 155 #define PT_R1 1 156 #define PT_R2 2 157 #define PT_R3 3 158 #define PT_R4 4 159 #define PT_R5 5 160 #define PT_R6 6 161 #define PT_R7 7 162 #define PT_R8 8 163 #define PT_R9 9 164 #define PT_R10 10 165 #define PT_R11 11 166 #define PT_R12 12 167 #define PT_R13 13 168 #define PT_R14 14 169 #define PT_R15 15 170 #define PT_R16 16 171 #define PT_R17 17 172 #define PT_R18 18 173 #define PT_R19 19 174 #define PT_R20 20 175 #define PT_R21 21 176 #define PT_R22 22 177 #define PT_R23 23 178 #define PT_R24 24 179 #define PT_R25 25 180 #define PT_R26 26 181 #define PT_R27 27 182 #define PT_R28 28 183 #define PT_R29 29 184 #define PT_R30 30 185 #define PT_R31 31 186 187 #define PT_NIP 32 188 #define PT_MSR 33 189 #define PT_ORIG_R3 34 190 #define PT_CTR 35 191 #define PT_LNK 36 192 #define PT_XER 37 193 #define PT_CCR 38 194 #ifndef __powerpc64__ 195 #define PT_MQ 39 196 #else 197 #define PT_SOFTE 39 198 #endif 199 #define PT_TRAP 40 200 #define PT_DAR 41 201 #define PT_DSISR 42 202 #define PT_RESULT 43 203 #define PT_REGS_COUNT 44 204 205 #define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ 206 207 #ifndef __powerpc64__ 208 209 #define PT_FPR31 (PT_FPR0 + 2*31) 210 #define PT_FPSCR (PT_FPR0 + 2*32 + 1) 211 212 #else /* __powerpc64__ */ 213 214 #define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */ 215 216 #ifdef __KERNEL__ 217 #define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */ 218 #endif 219 220 #define PT_VR0 82 /* each Vector reg occupies 2 slots in 64-bit */ 221 #define PT_VSCR (PT_VR0 + 32*2 + 1) 222 #define PT_VRSAVE (PT_VR0 + 33*2) 223 224 #ifdef __KERNEL__ 225 #define PT_VR0_32 164 /* each Vector reg occupies 4 slots in 32-bit */ 226 #define PT_VSCR_32 (PT_VR0 + 32*4 + 3) 227 #define PT_VRSAVE_32 (PT_VR0 + 33*4) 228 #endif 229 230 /* 231 * Only store first 32 VSRs here. The second 32 VSRs in VR0-31 232 */ 233 #define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */ 234 #define PT_VSR31 (PT_VSR0 + 2*31) 235 #ifdef __KERNEL__ 236 #define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */ 237 #endif 238 #endif /* __powerpc64__ */ 239 240 /* 241 * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. 242 * The transfer totals 34 quadword. Quadwords 0-31 contain the 243 * corresponding vector registers. Quadword 32 contains the vscr as the 244 * last word (offset 12) within that quadword. Quadword 33 contains the 245 * vrsave as the first word (offset 0) within the quadword. 246 * 247 * This definition of the VMX state is compatible with the current PPC32 248 * ptrace interface. This allows signal handling and ptrace to use the same 249 * structures. This also simplifies the implementation of a bi-arch 250 * (combined (32- and 64-bit) gdb. 251 */ 252 #define PTRACE_GETVRREGS 18 253 #define PTRACE_SETVRREGS 19 254 255 /* Get/set all the upper 32-bits of the SPE registers, accumulator, and 256 * spefscr, in one go */ 257 #define PTRACE_GETEVRREGS 20 258 #define PTRACE_SETEVRREGS 21 259 260 /* Get the first 32 128bit VSX registers */ 261 #define PTRACE_GETVSRREGS 27 262 #define PTRACE_SETVSRREGS 28 263 264 /* 265 * Get or set a debug register. The first 16 are DABR registers and the 266 * second 16 are IABR registers. 267 */ 268 #define PTRACE_GET_DEBUGREG 25 269 #define PTRACE_SET_DEBUGREG 26 270 271 /* (new) PTRACE requests using the same numbers as x86 and the same 272 * argument ordering. Additionally, they support more registers too 273 */ 274 #define PTRACE_GETREGS 12 275 #define PTRACE_SETREGS 13 276 #define PTRACE_GETFPREGS 14 277 #define PTRACE_SETFPREGS 15 278 #define PTRACE_GETREGS64 22 279 #define PTRACE_SETREGS64 23 280 281 /* (old) PTRACE requests with inverted arguments */ 282 #define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */ 283 #define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */ 284 #define PPC_PTRACE_GETFPREGS 0x97 /* Get FPRs 0 - 31 */ 285 #define PPC_PTRACE_SETFPREGS 0x96 /* Set FPRs 0 - 31 */ 286 287 /* Calls to trace a 64bit program from a 32bit program */ 288 #define PPC_PTRACE_PEEKTEXT_3264 0x95 289 #define PPC_PTRACE_PEEKDATA_3264 0x94 290 #define PPC_PTRACE_POKETEXT_3264 0x93 291 #define PPC_PTRACE_POKEDATA_3264 0x92 292 #define PPC_PTRACE_PEEKUSR_3264 0x91 293 #define PPC_PTRACE_POKEUSR_3264 0x90 294 295 #define PTRACE_SINGLEBLOCK 0x100 /* resume execution until next branch */ 296 297 #endif /* _ASM_POWERPC_PTRACE_H */ 298