1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 #ifndef _POWERPC_PROM_H 3 #define _POWERPC_PROM_H 4 #ifdef __KERNEL__ 5 6 /* 7 * Definitions for talking to the Open Firmware PROM on 8 * Power Macintosh computers. 9 * 10 * Copyright (C) 1996-2005 Paul Mackerras. 11 * 12 * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. 13 */ 14 #include <linux/types.h> 15 #include <asm/firmware.h> 16 17 struct device_node; 18 struct property; 19 20 #define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ 21 #define OF_DT_END_NODE 0x2 /* End node */ 22 #define OF_DT_PROP 0x3 /* Property: name off, size, 23 * content */ 24 #define OF_DT_NOP 0x4 /* nop */ 25 #define OF_DT_END 0x9 26 27 #define OF_DT_VERSION 0x10 28 29 /* 30 * This is what gets passed to the kernel by prom_init or kexec 31 * 32 * The dt struct contains the device tree structure, full pathes and 33 * property contents. The dt strings contain a separate block with just 34 * the strings for the property names, and is fully page aligned and 35 * self contained in a page, so that it can be kept around by the kernel, 36 * each property name appears only once in this page (cheap compression) 37 * 38 * the mem_rsvmap contains a map of reserved ranges of physical memory, 39 * passing it here instead of in the device-tree itself greatly simplifies 40 * the job of everybody. It's just a list of u64 pairs (base/size) that 41 * ends when size is 0 42 */ 43 struct boot_param_header { 44 __be32 magic; /* magic word OF_DT_HEADER */ 45 __be32 totalsize; /* total size of DT block */ 46 __be32 off_dt_struct; /* offset to structure */ 47 __be32 off_dt_strings; /* offset to strings */ 48 __be32 off_mem_rsvmap; /* offset to memory reserve map */ 49 __be32 version; /* format version */ 50 __be32 last_comp_version; /* last compatible version */ 51 /* version 2 fields below */ 52 __be32 boot_cpuid_phys; /* Physical CPU id we're booting on */ 53 /* version 3 fields below */ 54 __be32 dt_strings_size; /* size of the DT strings block */ 55 /* version 17 fields below */ 56 __be32 dt_struct_size; /* size of the DT structure block */ 57 }; 58 59 /* 60 * OF address retreival & translation 61 */ 62 63 /* Parse the ibm,dma-window property of an OF node into the busno, phys and 64 * size parameters. 65 */ 66 void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window, 67 unsigned long *busno, unsigned long *phys, 68 unsigned long *size); 69 70 extern void of_instantiate_rtc(void); 71 72 extern int of_get_ibm_chip_id(struct device_node *np); 73 74 struct of_drc_info { 75 char *drc_type; 76 char *drc_name_prefix; 77 u32 drc_index_start; 78 u32 drc_name_suffix_start; 79 u32 num_sequential_elems; 80 u32 sequential_inc; 81 u32 drc_power_domain; 82 u32 last_drc_index; 83 }; 84 85 extern int of_read_drc_info_cell(struct property **prop, 86 const __be32 **curval, struct of_drc_info *data); 87 88 89 /* 90 * There are two methods for telling firmware what our capabilities are. 91 * Newer machines have an "ibm,client-architecture-support" method on the 92 * root node. For older machines, we have to call the "process-elf-header" 93 * method in the /packages/elf-loader node, passing it a fake 32-bit 94 * ELF header containing a couple of PT_NOTE sections that contain 95 * structures that contain various information. 96 */ 97 98 /* New method - extensible architecture description vector. */ 99 100 /* Option vector bits - generic bits in byte 1 */ 101 #define OV_IGNORE 0x80 /* ignore this vector */ 102 #define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/ 103 104 /* Option vector 1: processor architectures supported */ 105 #define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */ 106 #define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */ 107 #define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */ 108 #define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */ 109 #define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */ 110 #define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */ 111 #define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */ 112 #define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */ 113 114 #define OV1_PPC_3_00 0x80 /* set if we support PowerPC 3.00 */ 115 #define OV1_PPC_3_1 0x40 /* set if we support PowerPC 3.1 */ 116 117 /* Option vector 2: Open Firmware options supported */ 118 #define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ 119 120 /* Option vector 3: processor options supported */ 121 #define OV3_FP 0x80 /* floating point */ 122 #define OV3_VMX 0x40 /* VMX/Altivec */ 123 #define OV3_DFP 0x20 /* decimal FP */ 124 125 /* Option vector 4: IBM PAPR implementation */ 126 #define OV4_MIN_ENT_CAP 0x01 /* minimum VP entitled capacity */ 127 128 /* Option vector 5: PAPR/OF options supported 129 * These bits are also used in firmware_has_feature() to validate 130 * the capabilities reported for vector 5 in the device tree so we 131 * encode the vector index in the define and use the OV5_FEAT() 132 * and OV5_INDX() macros to extract the desired information. 133 */ 134 #define OV5_FEAT(x) ((x) & 0xff) 135 #define OV5_INDX(x) ((x) >> 8) 136 #define OV5_LPAR 0x0280 /* logical partitioning supported */ 137 #define OV5_SPLPAR 0x0240 /* shared-processor LPAR supported */ 138 /* ibm,dynamic-reconfiguration-memory property supported */ 139 #define OV5_DRCONF_MEMORY 0x0220 140 #define OV5_LARGE_PAGES 0x0210 /* large pages supported */ 141 #define OV5_DONATE_DEDICATE_CPU 0x0202 /* donate dedicated CPU support */ 142 #define OV5_MSI 0x0201 /* PCIe/MSI support */ 143 #define OV5_CMO 0x0480 /* Cooperative Memory Overcommitment */ 144 #define OV5_XCMO 0x0440 /* Page Coalescing */ 145 #define OV5_FORM1_AFFINITY 0x0580 /* FORM1 NUMA affinity */ 146 #define OV5_PRRN 0x0540 /* Platform Resource Reassignment */ 147 #define OV5_FORM2_AFFINITY 0x0520 /* Form2 NUMA affinity */ 148 #define OV5_HP_EVT 0x0604 /* Hot Plug Event support */ 149 #define OV5_RESIZE_HPT 0x0601 /* Hash Page Table resizing */ 150 #define OV5_PFO_HW_RNG 0x1180 /* PFO Random Number Generator */ 151 #define OV5_PFO_HW_842 0x1140 /* PFO Compression Accelerator */ 152 #define OV5_PFO_HW_ENCR 0x1120 /* PFO Encryption Accelerator */ 153 #define OV5_SUB_PROCESSORS 0x1501 /* 1,2,or 4 Sub-Processors supported */ 154 #define OV5_DRMEM_V2 0x1680 /* ibm,dynamic-reconfiguration-v2 */ 155 #define OV5_XIVE_SUPPORT 0x17C0 /* XIVE Exploitation Support Mask */ 156 #define OV5_XIVE_LEGACY 0x1700 /* XIVE legacy mode Only */ 157 #define OV5_XIVE_EXPLOIT 0x1740 /* XIVE exploitation mode Only */ 158 #define OV5_XIVE_EITHER 0x1780 /* XIVE legacy or exploitation mode */ 159 /* MMU Base Architecture */ 160 #define OV5_MMU_SUPPORT 0x18C0 /* MMU Mode Support Mask */ 161 #define OV5_MMU_HASH 0x1800 /* Hash MMU Only */ 162 #define OV5_MMU_RADIX 0x1840 /* Radix MMU Only */ 163 #define OV5_MMU_EITHER 0x1880 /* Hash or Radix Supported */ 164 #define OV5_MMU_DYNAMIC 0x18C0 /* Hash or Radix Can Switch Later */ 165 #define OV5_NMMU 0x1820 /* Nest MMU Available */ 166 /* Hash Table Extensions */ 167 #define OV5_HASH_SEG_TBL 0x1980 /* In Memory Segment Tables Available */ 168 #define OV5_HASH_GTSE 0x1940 /* Guest Translation Shoot Down Avail */ 169 /* Radix Table Extensions */ 170 #define OV5_RADIX_GTSE 0x1A40 /* Guest Translation Shoot Down Avail */ 171 #define OV5_DRC_INFO 0x1640 /* Redef Prop Structures: drc-info */ 172 173 /* Option Vector 6: IBM PAPR hints */ 174 #define OV6_LINUX 0x02 /* Linux is our OS */ 175 176 #endif /* __KERNEL__ */ 177 #endif /* _POWERPC_PROM_H */ 178