xref: /openbmc/linux/arch/powerpc/include/asm/ppc_asm.h (revision bc5aa3a0)
1 /*
2  * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
3  */
4 #ifndef _ASM_POWERPC_PPC_ASM_H
5 #define _ASM_POWERPC_PPC_ASM_H
6 
7 #include <linux/stringify.h>
8 #include <asm/asm-compat.h>
9 #include <asm/processor.h>
10 #include <asm/ppc-opcode.h>
11 #include <asm/firmware.h>
12 
13 #ifndef __ASSEMBLY__
14 #error __FILE__ should only be used in assembler files
15 #else
16 
17 #define SZL			(BITS_PER_LONG/8)
18 
19 /*
20  * Stuff for accurate CPU time accounting.
21  * These macros handle transitions between user and system state
22  * in exception entry and exit and accumulate time to the
23  * user_time and system_time fields in the paca.
24  */
25 
26 #ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
27 #define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb)
28 #define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb)
29 #define ACCOUNT_STOLEN_TIME
30 #else
31 #define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb)				\
32 	MFTB(ra);			/* get timebase */		\
33 	PPC_LL	rb, ACCOUNT_STARTTIME_USER(ptr);			\
34 	PPC_STL	ra, ACCOUNT_STARTTIME(ptr);				\
35 	subf	rb,rb,ra;		/* subtract start value */	\
36 	PPC_LL	ra, ACCOUNT_USER_TIME(ptr);				\
37 	add	ra,ra,rb;		/* add on to user time */	\
38 	PPC_STL	ra, ACCOUNT_USER_TIME(ptr);				\
39 
40 #define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb)				\
41 	MFTB(ra);			/* get timebase */		\
42 	PPC_LL	rb, ACCOUNT_STARTTIME(ptr);				\
43 	PPC_STL	ra, ACCOUNT_STARTTIME_USER(ptr);			\
44 	subf	rb,rb,ra;		/* subtract start value */	\
45 	PPC_LL	ra, ACCOUNT_SYSTEM_TIME(ptr);				\
46 	add	ra,ra,rb;		/* add on to system time */	\
47 	PPC_STL	ra, ACCOUNT_SYSTEM_TIME(ptr)
48 
49 #ifdef CONFIG_PPC_SPLPAR
50 #define ACCOUNT_STOLEN_TIME						\
51 BEGIN_FW_FTR_SECTION;							\
52 	beq	33f;							\
53 	/* from user - see if there are any DTL entries to process */	\
54 	ld	r10,PACALPPACAPTR(r13);	/* get ptr to VPA */		\
55 	ld	r11,PACA_DTL_RIDX(r13);	/* get log read index */	\
56 	addi	r10,r10,LPPACA_DTLIDX;					\
57 	LDX_BE	r10,0,r10;		/* get log write index */	\
58 	cmpd	cr1,r11,r10;						\
59 	beq+	cr1,33f;						\
60 	bl	accumulate_stolen_time;				\
61 	ld	r12,_MSR(r1);						\
62 	andi.	r10,r12,MSR_PR;		/* Restore cr0 (coming from user) */ \
63 33:									\
64 END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
65 
66 #else  /* CONFIG_PPC_SPLPAR */
67 #define ACCOUNT_STOLEN_TIME
68 
69 #endif /* CONFIG_PPC_SPLPAR */
70 
71 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
72 
73 /*
74  * Macros for storing registers into and loading registers from
75  * exception frames.
76  */
77 #ifdef __powerpc64__
78 #define SAVE_GPR(n, base)	std	n,GPR0+8*(n)(base)
79 #define REST_GPR(n, base)	ld	n,GPR0+8*(n)(base)
80 #define SAVE_NVGPRS(base)	SAVE_8GPRS(14, base); SAVE_10GPRS(22, base)
81 #define REST_NVGPRS(base)	REST_8GPRS(14, base); REST_10GPRS(22, base)
82 #else
83 #define SAVE_GPR(n, base)	stw	n,GPR0+4*(n)(base)
84 #define REST_GPR(n, base)	lwz	n,GPR0+4*(n)(base)
85 #define SAVE_NVGPRS(base)	SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
86 				SAVE_10GPRS(22, base)
87 #define REST_NVGPRS(base)	REST_GPR(13, base); REST_8GPRS(14, base); \
88 				REST_10GPRS(22, base)
89 #endif
90 
91 #define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
92 #define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
93 #define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
94 #define SAVE_10GPRS(n, base)	SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
95 #define REST_2GPRS(n, base)	REST_GPR(n, base); REST_GPR(n+1, base)
96 #define REST_4GPRS(n, base)	REST_2GPRS(n, base); REST_2GPRS(n+2, base)
97 #define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
98 #define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
99 
100 #define SAVE_FPR(n, base)	stfd	n,8*TS_FPRWIDTH*(n)(base)
101 #define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
102 #define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
103 #define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
104 #define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
105 #define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
106 #define REST_FPR(n, base)	lfd	n,8*TS_FPRWIDTH*(n)(base)
107 #define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
108 #define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
109 #define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
110 #define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
111 #define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
112 
113 #define SAVE_VR(n,b,base)	li b,16*(n);  stvx n,base,b
114 #define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
115 #define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
116 #define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
117 #define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
118 #define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
119 #define REST_VR(n,b,base)	li b,16*(n); lvx n,base,b
120 #define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
121 #define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
122 #define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
123 #define REST_16VRS(n,b,base)	REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
124 #define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
125 
126 #ifdef __BIG_ENDIAN__
127 #define STXVD2X_ROT(n,b,base)		STXVD2X(n,b,base)
128 #define LXVD2X_ROT(n,b,base)		LXVD2X(n,b,base)
129 #else
130 #define STXVD2X_ROT(n,b,base)		XXSWAPD(n,n);		\
131 					STXVD2X(n,b,base);	\
132 					XXSWAPD(n,n)
133 
134 #define LXVD2X_ROT(n,b,base)		LXVD2X(n,b,base);	\
135 					XXSWAPD(n,n)
136 #endif
137 /* Save the lower 32 VSRs in the thread VSR region */
138 #define SAVE_VSR(n,b,base)	li b,16*(n);  STXVD2X_ROT(n,R##base,R##b)
139 #define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
140 #define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
141 #define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
142 #define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
143 #define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
144 #define REST_VSR(n,b,base)	li b,16*(n); LXVD2X_ROT(n,R##base,R##b)
145 #define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
146 #define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
147 #define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
148 #define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
149 #define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
150 
151 /*
152  * b = base register for addressing, o = base offset from register of 1st EVR
153  * n = first EVR, s = scratch
154  */
155 #define SAVE_EVR(n,s,b,o)	evmergehi s,s,n; stw s,o+4*(n)(b)
156 #define SAVE_2EVRS(n,s,b,o)	SAVE_EVR(n,s,b,o); SAVE_EVR(n+1,s,b,o)
157 #define SAVE_4EVRS(n,s,b,o)	SAVE_2EVRS(n,s,b,o); SAVE_2EVRS(n+2,s,b,o)
158 #define SAVE_8EVRS(n,s,b,o)	SAVE_4EVRS(n,s,b,o); SAVE_4EVRS(n+4,s,b,o)
159 #define SAVE_16EVRS(n,s,b,o)	SAVE_8EVRS(n,s,b,o); SAVE_8EVRS(n+8,s,b,o)
160 #define SAVE_32EVRS(n,s,b,o)	SAVE_16EVRS(n,s,b,o); SAVE_16EVRS(n+16,s,b,o)
161 #define REST_EVR(n,s,b,o)	lwz s,o+4*(n)(b); evmergelo n,s,n
162 #define REST_2EVRS(n,s,b,o)	REST_EVR(n,s,b,o); REST_EVR(n+1,s,b,o)
163 #define REST_4EVRS(n,s,b,o)	REST_2EVRS(n,s,b,o); REST_2EVRS(n+2,s,b,o)
164 #define REST_8EVRS(n,s,b,o)	REST_4EVRS(n,s,b,o); REST_4EVRS(n+4,s,b,o)
165 #define REST_16EVRS(n,s,b,o)	REST_8EVRS(n,s,b,o); REST_8EVRS(n+8,s,b,o)
166 #define REST_32EVRS(n,s,b,o)	REST_16EVRS(n,s,b,o); REST_16EVRS(n+16,s,b,o)
167 
168 /* Macros to adjust thread priority for hardware multithreading */
169 #define HMT_VERY_LOW	or	31,31,31	# very low priority
170 #define HMT_LOW		or	1,1,1
171 #define HMT_MEDIUM_LOW  or	6,6,6		# medium low priority
172 #define HMT_MEDIUM	or	2,2,2
173 #define HMT_MEDIUM_HIGH or	5,5,5		# medium high priority
174 #define HMT_HIGH	or	3,3,3
175 #define HMT_EXTRA_HIGH	or	7,7,7		# power7 only
176 
177 #ifdef CONFIG_PPC64
178 #define ULONG_SIZE 	8
179 #else
180 #define ULONG_SIZE	4
181 #endif
182 #define __VCPU_GPR(n)	(VCPU_GPRS + (n * ULONG_SIZE))
183 #define VCPU_GPR(n)	__VCPU_GPR(__REG_##n)
184 
185 #ifdef __KERNEL__
186 #ifdef CONFIG_PPC64
187 
188 #define STACKFRAMESIZE 256
189 #define __STK_REG(i)   (112 + ((i)-14)*8)
190 #define STK_REG(i)     __STK_REG(__REG_##i)
191 
192 #ifdef PPC64_ELF_ABI_v2
193 #define STK_GOT		24
194 #define __STK_PARAM(i)	(32 + ((i)-3)*8)
195 #else
196 #define STK_GOT		40
197 #define __STK_PARAM(i)	(48 + ((i)-3)*8)
198 #endif
199 #define STK_PARAM(i)	__STK_PARAM(__REG_##i)
200 
201 #ifdef PPC64_ELF_ABI_v2
202 
203 #define _GLOBAL(name) \
204 	.section ".text"; \
205 	.align 2 ; \
206 	.type name,@function; \
207 	.globl name; \
208 name:
209 
210 #define _GLOBAL_TOC(name) \
211 	.section ".text"; \
212 	.align 2 ; \
213 	.type name,@function; \
214 	.globl name; \
215 name: \
216 0:	addis r2,r12,(.TOC.-0b)@ha; \
217 	addi r2,r2,(.TOC.-0b)@l; \
218 	.localentry name,.-name
219 
220 #define _KPROBE(name) \
221 	.section ".kprobes.text","a"; \
222 	.align 2 ; \
223 	.type name,@function; \
224 	.globl name; \
225 name:
226 
227 #define DOTSYM(a)	a
228 
229 #else
230 
231 #define XGLUE(a,b) a##b
232 #define GLUE(a,b) XGLUE(a,b)
233 
234 #define _GLOBAL(name) \
235 	.section ".text"; \
236 	.align 2 ; \
237 	.globl name; \
238 	.globl GLUE(.,name); \
239 	.section ".opd","aw"; \
240 name: \
241 	.quad GLUE(.,name); \
242 	.quad .TOC.@tocbase; \
243 	.quad 0; \
244 	.previous; \
245 	.type GLUE(.,name),@function; \
246 GLUE(.,name):
247 
248 #define _GLOBAL_TOC(name) _GLOBAL(name)
249 
250 #define _KPROBE(name) \
251 	.section ".kprobes.text","a"; \
252 	.align 2 ; \
253 	.globl name; \
254 	.globl GLUE(.,name); \
255 	.section ".opd","aw"; \
256 name: \
257 	.quad GLUE(.,name); \
258 	.quad .TOC.@tocbase; \
259 	.quad 0; \
260 	.previous; \
261 	.type GLUE(.,name),@function; \
262 GLUE(.,name):
263 
264 #define DOTSYM(a)	GLUE(.,a)
265 
266 #endif
267 
268 #else /* 32-bit */
269 
270 #define _ENTRY(n)	\
271 	.globl n;	\
272 n:
273 
274 #define _GLOBAL(n)	\
275 	.text;		\
276 	.stabs __stringify(n:F-1),N_FUN,0,0,n;\
277 	.globl n;	\
278 n:
279 
280 #define _GLOBAL_TOC(name) _GLOBAL(name)
281 
282 #define _KPROBE(n)	\
283 	.section ".kprobes.text","a";	\
284 	.globl	n;	\
285 n:
286 
287 #endif
288 
289 #define FUNC_START(name)	_GLOBAL(name)
290 #define FUNC_END(name)
291 
292 /*
293  * LOAD_REG_IMMEDIATE(rn, expr)
294  *   Loads the value of the constant expression 'expr' into register 'rn'
295  *   using immediate instructions only.  Use this when it's important not
296  *   to reference other data (i.e. on ppc64 when the TOC pointer is not
297  *   valid) and when 'expr' is a constant or absolute address.
298  *
299  * LOAD_REG_ADDR(rn, name)
300  *   Loads the address of label 'name' into register 'rn'.  Use this when
301  *   you don't particularly need immediate instructions only, but you need
302  *   the whole address in one register (e.g. it's a structure address and
303  *   you want to access various offsets within it).  On ppc32 this is
304  *   identical to LOAD_REG_IMMEDIATE.
305  *
306  * LOAD_REG_ADDR_PIC(rn, name)
307  *   Loads the address of label 'name' into register 'run'. Use this when
308  *   the kernel doesn't run at the linked or relocated address. Please
309  *   note that this macro will clobber the lr register.
310  *
311  * LOAD_REG_ADDRBASE(rn, name)
312  * ADDROFF(name)
313  *   LOAD_REG_ADDRBASE loads part of the address of label 'name' into
314  *   register 'rn'.  ADDROFF(name) returns the remainder of the address as
315  *   a constant expression.  ADDROFF(name) is a signed expression < 16 bits
316  *   in size, so is suitable for use directly as an offset in load and store
317  *   instructions.  Use this when loading/storing a single word or less as:
318  *      LOAD_REG_ADDRBASE(rX, name)
319  *      ld	rY,ADDROFF(name)(rX)
320  */
321 
322 /* Be careful, this will clobber the lr register. */
323 #define LOAD_REG_ADDR_PIC(reg, name)		\
324 	bl	0f;				\
325 0:	mflr	reg;				\
326 	addis	reg,reg,(name - 0b)@ha;		\
327 	addi	reg,reg,(name - 0b)@l;
328 
329 #ifdef __powerpc64__
330 #ifdef HAVE_AS_ATHIGH
331 #define __AS_ATHIGH high
332 #else
333 #define __AS_ATHIGH h
334 #endif
335 #define LOAD_REG_IMMEDIATE(reg,expr)		\
336 	lis     reg,(expr)@highest;		\
337 	ori     reg,reg,(expr)@higher;	\
338 	rldicr  reg,reg,32,31;		\
339 	oris    reg,reg,(expr)@__AS_ATHIGH;	\
340 	ori     reg,reg,(expr)@l;
341 
342 #define LOAD_REG_ADDR(reg,name)			\
343 	ld	reg,name@got(r2)
344 
345 #define LOAD_REG_ADDRBASE(reg,name)	LOAD_REG_ADDR(reg,name)
346 #define ADDROFF(name)			0
347 
348 /* offsets for stack frame layout */
349 #define LRSAVE	16
350 
351 #else /* 32-bit */
352 
353 #define LOAD_REG_IMMEDIATE(reg,expr)		\
354 	lis	reg,(expr)@ha;		\
355 	addi	reg,reg,(expr)@l;
356 
357 #define LOAD_REG_ADDR(reg,name)		LOAD_REG_IMMEDIATE(reg, name)
358 
359 #define LOAD_REG_ADDRBASE(reg, name)	lis	reg,name@ha
360 #define ADDROFF(name)			name@l
361 
362 /* offsets for stack frame layout */
363 #define LRSAVE	4
364 
365 #endif
366 
367 /* various errata or part fixups */
368 #ifdef CONFIG_PPC601_SYNC_FIX
369 #define SYNC				\
370 BEGIN_FTR_SECTION			\
371 	sync;				\
372 	isync;				\
373 END_FTR_SECTION_IFSET(CPU_FTR_601)
374 #define SYNC_601			\
375 BEGIN_FTR_SECTION			\
376 	sync;				\
377 END_FTR_SECTION_IFSET(CPU_FTR_601)
378 #define ISYNC_601			\
379 BEGIN_FTR_SECTION			\
380 	isync;				\
381 END_FTR_SECTION_IFSET(CPU_FTR_601)
382 #else
383 #define	SYNC
384 #define SYNC_601
385 #define ISYNC_601
386 #endif
387 
388 #if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E)
389 #define MFTB(dest)			\
390 90:	mfspr dest, SPRN_TBRL;		\
391 BEGIN_FTR_SECTION_NESTED(96);		\
392 	cmpwi dest,0;			\
393 	beq-  90b;			\
394 END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
395 #elif defined(CONFIG_8xx)
396 #define MFTB(dest)			mftb dest
397 #else
398 #define MFTB(dest)			mfspr dest, SPRN_TBRL
399 #endif
400 
401 #ifndef CONFIG_SMP
402 #define TLBSYNC
403 #else /* CONFIG_SMP */
404 /* tlbsync is not implemented on 601 */
405 #define TLBSYNC				\
406 BEGIN_FTR_SECTION			\
407 	tlbsync;			\
408 	sync;				\
409 END_FTR_SECTION_IFCLR(CPU_FTR_601)
410 #endif
411 
412 #ifdef CONFIG_PPC64
413 #define MTOCRF(FXM, RS)			\
414 	BEGIN_FTR_SECTION_NESTED(848);	\
415 	mtcrf	(FXM), RS;		\
416 	FTR_SECTION_ELSE_NESTED(848);	\
417 	mtocrf (FXM), RS;		\
418 	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848)
419 #endif
420 
421 /*
422  * This instruction is not implemented on the PPC 603 or 601; however, on
423  * the 403GCX and 405GP tlbia IS defined and tlbie is not.
424  * All of these instructions exist in the 8xx, they have magical powers,
425  * and they must be used.
426  */
427 
428 #if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
429 #define tlbia					\
430 	li	r4,1024;			\
431 	mtctr	r4;				\
432 	lis	r4,KERNELBASE@h;		\
433 	.machine push;				\
434 	.machine "power4";			\
435 0:	tlbie	r4;				\
436 	.machine pop;				\
437 	addi	r4,r4,0x1000;			\
438 	bdnz	0b
439 #endif
440 
441 
442 #ifdef CONFIG_IBM440EP_ERR42
443 #define PPC440EP_ERR42 isync
444 #else
445 #define PPC440EP_ERR42
446 #endif
447 
448 /* The following stops all load and store data streams associated with stream
449  * ID (ie. streams created explicitly).  The embedded and server mnemonics for
450  * dcbt are different so we use machine "power4" here explicitly.
451  */
452 #define DCBT_STOP_ALL_STREAM_IDS(scratch)	\
453 .machine push ;					\
454 .machine "power4" ;				\
455        lis     scratch,0x60000000@h;		\
456        dcbt    r0,scratch,0b01010;		\
457 .machine pop
458 
459 /*
460  * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them
461  * keep the address intact to be compatible with code shared with
462  * 32-bit classic.
463  *
464  * On the other hand, I find it useful to have them behave as expected
465  * by their name (ie always do the addition) on 64-bit BookE
466  */
467 #if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64)
468 #define toreal(rd)
469 #define fromreal(rd)
470 
471 /*
472  * We use addis to ensure compatibility with the "classic" ppc versions of
473  * these macros, which use rs = 0 to get the tophys offset in rd, rather than
474  * converting the address in r0, and so this version has to do that too
475  * (i.e. set register rd to 0 when rs == 0).
476  */
477 #define tophys(rd,rs)				\
478 	addis	rd,rs,0
479 
480 #define tovirt(rd,rs)				\
481 	addis	rd,rs,0
482 
483 #elif defined(CONFIG_PPC64)
484 #define toreal(rd)		/* we can access c000... in real mode */
485 #define fromreal(rd)
486 
487 #define tophys(rd,rs)                           \
488 	clrldi	rd,rs,2
489 
490 #define tovirt(rd,rs)                           \
491 	rotldi	rd,rs,16;			\
492 	ori	rd,rd,((KERNELBASE>>48)&0xFFFF);\
493 	rotldi	rd,rd,48
494 #else
495 /*
496  * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
497  * physical base address of RAM at compile time.
498  */
499 #define toreal(rd)	tophys(rd,rd)
500 #define fromreal(rd)	tovirt(rd,rd)
501 
502 #define tophys(rd,rs)				\
503 0:	addis	rd,rs,-PAGE_OFFSET@h;		\
504 	.section ".vtop_fixup","aw";		\
505 	.align  1;				\
506 	.long   0b;				\
507 	.previous
508 
509 #define tovirt(rd,rs)				\
510 0:	addis	rd,rs,PAGE_OFFSET@h;		\
511 	.section ".ptov_fixup","aw";		\
512 	.align  1;				\
513 	.long   0b;				\
514 	.previous
515 #endif
516 
517 #ifdef CONFIG_PPC_BOOK3S_64
518 #define RFI		rfid
519 #define MTMSRD(r)	mtmsrd	r
520 #define MTMSR_EERI(reg)	mtmsrd	reg,1
521 #else
522 #define FIX_SRR1(ra, rb)
523 #ifndef CONFIG_40x
524 #define	RFI		rfi
525 #else
526 #define RFI		rfi; b .	/* Prevent prefetch past rfi */
527 #endif
528 #define MTMSRD(r)	mtmsr	r
529 #define MTMSR_EERI(reg)	mtmsr	reg
530 #define CLR_TOP32(r)
531 #endif
532 
533 #endif /* __KERNEL__ */
534 
535 /* The boring bits... */
536 
537 /* Condition Register Bit Fields */
538 
539 #define	cr0	0
540 #define	cr1	1
541 #define	cr2	2
542 #define	cr3	3
543 #define	cr4	4
544 #define	cr5	5
545 #define	cr6	6
546 #define	cr7	7
547 
548 
549 /*
550  * General Purpose Registers (GPRs)
551  *
552  * The lower case r0-r31 should be used in preference to the upper
553  * case R0-R31 as they provide more error checking in the assembler.
554  * Use R0-31 only when really nessesary.
555  */
556 
557 #define	r0	%r0
558 #define	r1	%r1
559 #define	r2	%r2
560 #define	r3	%r3
561 #define	r4	%r4
562 #define	r5	%r5
563 #define	r6	%r6
564 #define	r7	%r7
565 #define	r8	%r8
566 #define	r9	%r9
567 #define	r10	%r10
568 #define	r11	%r11
569 #define	r12	%r12
570 #define	r13	%r13
571 #define	r14	%r14
572 #define	r15	%r15
573 #define	r16	%r16
574 #define	r17	%r17
575 #define	r18	%r18
576 #define	r19	%r19
577 #define	r20	%r20
578 #define	r21	%r21
579 #define	r22	%r22
580 #define	r23	%r23
581 #define	r24	%r24
582 #define	r25	%r25
583 #define	r26	%r26
584 #define	r27	%r27
585 #define	r28	%r28
586 #define	r29	%r29
587 #define	r30	%r30
588 #define	r31	%r31
589 
590 
591 /* Floating Point Registers (FPRs) */
592 
593 #define	fr0	0
594 #define	fr1	1
595 #define	fr2	2
596 #define	fr3	3
597 #define	fr4	4
598 #define	fr5	5
599 #define	fr6	6
600 #define	fr7	7
601 #define	fr8	8
602 #define	fr9	9
603 #define	fr10	10
604 #define	fr11	11
605 #define	fr12	12
606 #define	fr13	13
607 #define	fr14	14
608 #define	fr15	15
609 #define	fr16	16
610 #define	fr17	17
611 #define	fr18	18
612 #define	fr19	19
613 #define	fr20	20
614 #define	fr21	21
615 #define	fr22	22
616 #define	fr23	23
617 #define	fr24	24
618 #define	fr25	25
619 #define	fr26	26
620 #define	fr27	27
621 #define	fr28	28
622 #define	fr29	29
623 #define	fr30	30
624 #define	fr31	31
625 
626 /* AltiVec Registers (VPRs) */
627 
628 #define	v0	0
629 #define	v1	1
630 #define	v2	2
631 #define	v3	3
632 #define	v4	4
633 #define	v5	5
634 #define	v6	6
635 #define	v7	7
636 #define	v8	8
637 #define	v9	9
638 #define	v10	10
639 #define	v11	11
640 #define	v12	12
641 #define	v13	13
642 #define	v14	14
643 #define	v15	15
644 #define	v16	16
645 #define	v17	17
646 #define	v18	18
647 #define	v19	19
648 #define	v20	20
649 #define	v21	21
650 #define	v22	22
651 #define	v23	23
652 #define	v24	24
653 #define	v25	25
654 #define	v26	26
655 #define	v27	27
656 #define	v28	28
657 #define	v29	29
658 #define	v30	30
659 #define	v31	31
660 
661 /* VSX Registers (VSRs) */
662 
663 #define	vs0	0
664 #define	vs1	1
665 #define	vs2	2
666 #define	vs3	3
667 #define	vs4	4
668 #define	vs5	5
669 #define	vs6	6
670 #define	vs7	7
671 #define	vs8	8
672 #define	vs9	9
673 #define	vs10	10
674 #define	vs11	11
675 #define	vs12	12
676 #define	vs13	13
677 #define	vs14	14
678 #define	vs15	15
679 #define	vs16	16
680 #define	vs17	17
681 #define	vs18	18
682 #define	vs19	19
683 #define	vs20	20
684 #define	vs21	21
685 #define	vs22	22
686 #define	vs23	23
687 #define	vs24	24
688 #define	vs25	25
689 #define	vs26	26
690 #define	vs27	27
691 #define	vs28	28
692 #define	vs29	29
693 #define	vs30	30
694 #define	vs31	31
695 #define	vs32	32
696 #define	vs33	33
697 #define	vs34	34
698 #define	vs35	35
699 #define	vs36	36
700 #define	vs37	37
701 #define	vs38	38
702 #define	vs39	39
703 #define	vs40	40
704 #define	vs41	41
705 #define	vs42	42
706 #define	vs43	43
707 #define	vs44	44
708 #define	vs45	45
709 #define	vs46	46
710 #define	vs47	47
711 #define	vs48	48
712 #define	vs49	49
713 #define	vs50	50
714 #define	vs51	51
715 #define	vs52	52
716 #define	vs53	53
717 #define	vs54	54
718 #define	vs55	55
719 #define	vs56	56
720 #define	vs57	57
721 #define	vs58	58
722 #define	vs59	59
723 #define	vs60	60
724 #define	vs61	61
725 #define	vs62	62
726 #define	vs63	63
727 
728 /* SPE Registers (EVPRs) */
729 
730 #define	evr0	0
731 #define	evr1	1
732 #define	evr2	2
733 #define	evr3	3
734 #define	evr4	4
735 #define	evr5	5
736 #define	evr6	6
737 #define	evr7	7
738 #define	evr8	8
739 #define	evr9	9
740 #define	evr10	10
741 #define	evr11	11
742 #define	evr12	12
743 #define	evr13	13
744 #define	evr14	14
745 #define	evr15	15
746 #define	evr16	16
747 #define	evr17	17
748 #define	evr18	18
749 #define	evr19	19
750 #define	evr20	20
751 #define	evr21	21
752 #define	evr22	22
753 #define	evr23	23
754 #define	evr24	24
755 #define	evr25	25
756 #define	evr26	26
757 #define	evr27	27
758 #define	evr28	28
759 #define	evr29	29
760 #define	evr30	30
761 #define	evr31	31
762 
763 /* some stab codes */
764 #define N_FUN	36
765 #define N_RSYM	64
766 #define N_SLINE	68
767 #define N_SO	100
768 
769 /*
770  * Create an endian fixup trampoline
771  *
772  * This starts with a "tdi 0,0,0x48" instruction which is
773  * essentially a "trap never", and thus akin to a nop.
774  *
775  * The opcode for this instruction read with the wrong endian
776  * however results in a b . + 8
777  *
778  * So essentially we use that trick to execute the following
779  * trampoline in "reverse endian" if we are running with the
780  * MSR_LE bit set the "wrong" way for whatever endianness the
781  * kernel is built for.
782  */
783 
784 #ifdef CONFIG_PPC_BOOK3E
785 #define FIXUP_ENDIAN
786 #else
787 #define FIXUP_ENDIAN						   \
788 	tdi   0,0,0x48;	  /* Reverse endian of b . + 8		*/ \
789 	b     $+36;	  /* Skip trampoline if endian is good	*/ \
790 	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
791 	.long 0xa602487d; /* mflr r10				*/ \
792 	.long 0x1c004a39; /* addi r10,r10,28			*/ \
793 	.long 0xa600607d; /* mfmsr r11				*/ \
794 	.long 0x01006b69; /* xori r11,r11,1			*/ \
795 	.long 0xa6035a7d; /* mtsrr0 r10				*/ \
796 	.long 0xa6037b7d; /* mtsrr1 r11				*/ \
797 	.long 0x2400004c  /* rfid				*/
798 #endif /* !CONFIG_PPC_BOOK3E */
799 #endif /*  __ASSEMBLY__ */
800 #endif /* _ASM_POWERPC_PPC_ASM_H */
801