xref: /openbmc/linux/arch/powerpc/include/asm/ppc_asm.h (revision 849b0156)
1 /*
2  * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
3  */
4 #ifndef _ASM_POWERPC_PPC_ASM_H
5 #define _ASM_POWERPC_PPC_ASM_H
6 
7 #include <linux/stringify.h>
8 #include <asm/asm-compat.h>
9 #include <asm/processor.h>
10 #include <asm/ppc-opcode.h>
11 #include <asm/firmware.h>
12 #include <asm/feature-fixups.h>
13 #include <asm/extable.h>
14 
15 #ifdef __ASSEMBLY__
16 
17 #define SZL			(BITS_PER_LONG/8)
18 
19 /*
20  * This expands to a sequence of operations with reg incrementing from
21  * start to end inclusive, of this form:
22  *
23  *   op  reg, (offset + (width * reg))(base)
24  *
25  * Note that offset is not the offset of the first operation unless start
26  * is zero (or width is zero).
27  */
28 .macro OP_REGS op, width, start, end, base, offset
29 	.Lreg=\start
30 	.rept (\end - \start + 1)
31 	\op	.Lreg, \offset + \width * .Lreg(\base)
32 	.Lreg=.Lreg+1
33 	.endr
34 .endm
35 
36 /*
37  * Macros for storing registers into and loading registers from
38  * exception frames.
39  */
40 #ifdef __powerpc64__
41 #define SAVE_GPRS(start, end, base)	OP_REGS std, 8, start, end, base, GPR0
42 #define REST_GPRS(start, end, base)	OP_REGS ld, 8, start, end, base, GPR0
43 #define SAVE_NVGPRS(base)		SAVE_GPRS(14, 31, base)
44 #define REST_NVGPRS(base)		REST_GPRS(14, 31, base)
45 #else
46 #define SAVE_GPRS(start, end, base)	OP_REGS stw, 4, start, end, base, GPR0
47 #define REST_GPRS(start, end, base)	OP_REGS lwz, 4, start, end, base, GPR0
48 #define SAVE_NVGPRS(base)		SAVE_GPRS(13, 31, base)
49 #define REST_NVGPRS(base)		REST_GPRS(13, 31, base)
50 #endif
51 
52 #define SAVE_GPR(n, base)		SAVE_GPRS(n, n, base)
53 #define REST_GPR(n, base)		REST_GPRS(n, n, base)
54 
55 #define SAVE_FPR(n, base)	stfd	n,8*TS_FPRWIDTH*(n)(base)
56 #define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
57 #define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
58 #define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
59 #define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
60 #define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
61 #define REST_FPR(n, base)	lfd	n,8*TS_FPRWIDTH*(n)(base)
62 #define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
63 #define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
64 #define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
65 #define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
66 #define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
67 
68 #define SAVE_VR(n,b,base)	li b,16*(n);  stvx n,base,b
69 #define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
70 #define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
71 #define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
72 #define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
73 #define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
74 #define REST_VR(n,b,base)	li b,16*(n); lvx n,base,b
75 #define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
76 #define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
77 #define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
78 #define REST_16VRS(n,b,base)	REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
79 #define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
80 
81 #ifdef __BIG_ENDIAN__
82 #define STXVD2X_ROT(n,b,base)		STXVD2X(n,b,base)
83 #define LXVD2X_ROT(n,b,base)		LXVD2X(n,b,base)
84 #else
85 #define STXVD2X_ROT(n,b,base)		XXSWAPD(n,n);		\
86 					STXVD2X(n,b,base);	\
87 					XXSWAPD(n,n)
88 
89 #define LXVD2X_ROT(n,b,base)		LXVD2X(n,b,base);	\
90 					XXSWAPD(n,n)
91 #endif
92 /* Save the lower 32 VSRs in the thread VSR region */
93 #define SAVE_VSR(n,b,base)	li b,16*(n);  STXVD2X_ROT(n,R##base,R##b)
94 #define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
95 #define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
96 #define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
97 #define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
98 #define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
99 #define REST_VSR(n,b,base)	li b,16*(n); LXVD2X_ROT(n,R##base,R##b)
100 #define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
101 #define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
102 #define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
103 #define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
104 #define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
105 
106 /*
107  * b = base register for addressing, o = base offset from register of 1st EVR
108  * n = first EVR, s = scratch
109  */
110 #define SAVE_EVR(n,s,b,o)	evmergehi s,s,n; stw s,o+4*(n)(b)
111 #define SAVE_2EVRS(n,s,b,o)	SAVE_EVR(n,s,b,o); SAVE_EVR(n+1,s,b,o)
112 #define SAVE_4EVRS(n,s,b,o)	SAVE_2EVRS(n,s,b,o); SAVE_2EVRS(n+2,s,b,o)
113 #define SAVE_8EVRS(n,s,b,o)	SAVE_4EVRS(n,s,b,o); SAVE_4EVRS(n+4,s,b,o)
114 #define SAVE_16EVRS(n,s,b,o)	SAVE_8EVRS(n,s,b,o); SAVE_8EVRS(n+8,s,b,o)
115 #define SAVE_32EVRS(n,s,b,o)	SAVE_16EVRS(n,s,b,o); SAVE_16EVRS(n+16,s,b,o)
116 #define REST_EVR(n,s,b,o)	lwz s,o+4*(n)(b); evmergelo n,s,n
117 #define REST_2EVRS(n,s,b,o)	REST_EVR(n,s,b,o); REST_EVR(n+1,s,b,o)
118 #define REST_4EVRS(n,s,b,o)	REST_2EVRS(n,s,b,o); REST_2EVRS(n+2,s,b,o)
119 #define REST_8EVRS(n,s,b,o)	REST_4EVRS(n,s,b,o); REST_4EVRS(n+4,s,b,o)
120 #define REST_16EVRS(n,s,b,o)	REST_8EVRS(n,s,b,o); REST_8EVRS(n+8,s,b,o)
121 #define REST_32EVRS(n,s,b,o)	REST_16EVRS(n,s,b,o); REST_16EVRS(n+16,s,b,o)
122 
123 /* Macros to adjust thread priority for hardware multithreading */
124 #define HMT_VERY_LOW	or	31,31,31	# very low priority
125 #define HMT_LOW		or	1,1,1
126 #define HMT_MEDIUM_LOW  or	6,6,6		# medium low priority
127 #define HMT_MEDIUM	or	2,2,2
128 #define HMT_MEDIUM_HIGH or	5,5,5		# medium high priority
129 #define HMT_HIGH	or	3,3,3
130 #define HMT_EXTRA_HIGH	or	7,7,7		# power7 only
131 
132 #ifdef CONFIG_PPC64
133 #define ULONG_SIZE 	8
134 #else
135 #define ULONG_SIZE	4
136 #endif
137 #define __VCPU_GPR(n)	(VCPU_GPRS + (n * ULONG_SIZE))
138 #define VCPU_GPR(n)	__VCPU_GPR(__REG_##n)
139 
140 #ifdef __KERNEL__
141 
142 /*
143  * We use __powerpc64__ here because we want the compat VDSO to use the 32-bit
144  * version below in the else case of the ifdef.
145  */
146 #ifdef __powerpc64__
147 
148 #define STACKFRAMESIZE 256
149 #define __STK_REG(i)   (112 + ((i)-14)*8)
150 #define STK_REG(i)     __STK_REG(__REG_##i)
151 
152 #ifdef PPC64_ELF_ABI_v2
153 #define STK_GOT		24
154 #define __STK_PARAM(i)	(32 + ((i)-3)*8)
155 #else
156 #define STK_GOT		40
157 #define __STK_PARAM(i)	(48 + ((i)-3)*8)
158 #endif
159 #define STK_PARAM(i)	__STK_PARAM(__REG_##i)
160 
161 #ifdef PPC64_ELF_ABI_v2
162 
163 #define _GLOBAL(name) \
164 	.align 2 ; \
165 	.type name,@function; \
166 	.globl name; \
167 name:
168 
169 #define _GLOBAL_TOC(name) \
170 	.align 2 ; \
171 	.type name,@function; \
172 	.globl name; \
173 name: \
174 0:	addis r2,r12,(.TOC.-0b)@ha; \
175 	addi r2,r2,(.TOC.-0b)@l; \
176 	.localentry name,.-name
177 
178 #define DOTSYM(a)	a
179 
180 #else
181 
182 #define XGLUE(a,b) a##b
183 #define GLUE(a,b) XGLUE(a,b)
184 
185 #define _GLOBAL(name) \
186 	.align 2 ; \
187 	.globl name; \
188 	.globl GLUE(.,name); \
189 	.pushsection ".opd","aw"; \
190 name: \
191 	.quad GLUE(.,name); \
192 	.quad .TOC.@tocbase; \
193 	.quad 0; \
194 	.popsection; \
195 	.type GLUE(.,name),@function; \
196 GLUE(.,name):
197 
198 #define _GLOBAL_TOC(name) _GLOBAL(name)
199 
200 #define DOTSYM(a)	GLUE(.,a)
201 
202 #endif
203 
204 #else /* 32-bit */
205 
206 #define _GLOBAL(n)	\
207 	.globl n;	\
208 n:
209 
210 #define _GLOBAL_TOC(name) _GLOBAL(name)
211 
212 #define DOTSYM(a)	a
213 
214 #endif
215 
216 /*
217  * __kprobes (the C annotation) puts the symbol into the .kprobes.text
218  * section, which gets emitted at the end of regular text.
219  *
220  * _ASM_NOKPROBE_SYMBOL and NOKPROBE_SYMBOL just adds the symbol to
221  * a blacklist. The former is for core kprobe functions/data, the
222  * latter is for those that incdentially must be excluded from probing
223  * and allows them to be linked at more optimal location within text.
224  */
225 #ifdef CONFIG_KPROBES
226 #define _ASM_NOKPROBE_SYMBOL(entry)			\
227 	.pushsection "_kprobe_blacklist","aw";		\
228 	PPC_LONG (entry) ;				\
229 	.popsection
230 #else
231 #define _ASM_NOKPROBE_SYMBOL(entry)
232 #endif
233 
234 #define FUNC_START(name)	_GLOBAL(name)
235 #define FUNC_END(name)
236 
237 /*
238  * LOAD_REG_IMMEDIATE(rn, expr)
239  *   Loads the value of the constant expression 'expr' into register 'rn'
240  *   using immediate instructions only.  Use this when it's important not
241  *   to reference other data (i.e. on ppc64 when the TOC pointer is not
242  *   valid) and when 'expr' is a constant or absolute address.
243  *
244  * LOAD_REG_ADDR(rn, name)
245  *   Loads the address of label 'name' into register 'rn'.  Use this when
246  *   you don't particularly need immediate instructions only, but you need
247  *   the whole address in one register (e.g. it's a structure address and
248  *   you want to access various offsets within it).  On ppc32 this is
249  *   identical to LOAD_REG_IMMEDIATE.
250  *
251  * LOAD_REG_ADDR_PIC(rn, name)
252  *   Loads the address of label 'name' into register 'run'. Use this when
253  *   the kernel doesn't run at the linked or relocated address. Please
254  *   note that this macro will clobber the lr register.
255  *
256  * LOAD_REG_ADDRBASE(rn, name)
257  * ADDROFF(name)
258  *   LOAD_REG_ADDRBASE loads part of the address of label 'name' into
259  *   register 'rn'.  ADDROFF(name) returns the remainder of the address as
260  *   a constant expression.  ADDROFF(name) is a signed expression < 16 bits
261  *   in size, so is suitable for use directly as an offset in load and store
262  *   instructions.  Use this when loading/storing a single word or less as:
263  *      LOAD_REG_ADDRBASE(rX, name)
264  *      ld	rY,ADDROFF(name)(rX)
265  */
266 
267 /* Be careful, this will clobber the lr register. */
268 #define LOAD_REG_ADDR_PIC(reg, name)		\
269 	bcl	20,31,$+4;			\
270 0:	mflr	reg;				\
271 	addis	reg,reg,(name - 0b)@ha;		\
272 	addi	reg,reg,(name - 0b)@l;
273 
274 #if defined(__powerpc64__) && defined(HAVE_AS_ATHIGH)
275 #define __AS_ATHIGH high
276 #else
277 #define __AS_ATHIGH h
278 #endif
279 
280 .macro __LOAD_REG_IMMEDIATE_32 r, x
281 	.if (\x) >= 0x8000 || (\x) < -0x8000
282 		lis \r, (\x)@__AS_ATHIGH
283 		.if (\x) & 0xffff != 0
284 			ori \r, \r, (\x)@l
285 		.endif
286 	.else
287 		li \r, (\x)@l
288 	.endif
289 .endm
290 
291 .macro __LOAD_REG_IMMEDIATE r, x
292 	.if (\x) >= 0x80000000 || (\x) < -0x80000000
293 		__LOAD_REG_IMMEDIATE_32 \r, (\x) >> 32
294 		sldi	\r, \r, 32
295 		.if (\x) & 0xffff0000 != 0
296 			oris \r, \r, (\x)@__AS_ATHIGH
297 		.endif
298 		.if (\x) & 0xffff != 0
299 			ori \r, \r, (\x)@l
300 		.endif
301 	.else
302 		__LOAD_REG_IMMEDIATE_32 \r, \x
303 	.endif
304 .endm
305 
306 #ifdef __powerpc64__
307 
308 #define LOAD_REG_IMMEDIATE(reg, expr) __LOAD_REG_IMMEDIATE reg, expr
309 
310 #define LOAD_REG_IMMEDIATE_SYM(reg, tmp, expr)	\
311 	lis	tmp, (expr)@highest;		\
312 	lis	reg, (expr)@__AS_ATHIGH;	\
313 	ori	tmp, tmp, (expr)@higher;	\
314 	ori	reg, reg, (expr)@l;		\
315 	rldimi	reg, tmp, 32, 0
316 
317 #define LOAD_REG_ADDR(reg,name)			\
318 	ld	reg,name@got(r2)
319 
320 #define LOAD_REG_ADDRBASE(reg,name)	LOAD_REG_ADDR(reg,name)
321 #define ADDROFF(name)			0
322 
323 /* offsets for stack frame layout */
324 #define LRSAVE	16
325 
326 #else /* 32-bit */
327 
328 #define LOAD_REG_IMMEDIATE(reg, expr) __LOAD_REG_IMMEDIATE_32 reg, expr
329 
330 #define LOAD_REG_IMMEDIATE_SYM(reg,expr)		\
331 	lis	reg,(expr)@ha;		\
332 	addi	reg,reg,(expr)@l;
333 
334 #define LOAD_REG_ADDR(reg,name)		LOAD_REG_IMMEDIATE_SYM(reg, name)
335 
336 #define LOAD_REG_ADDRBASE(reg, name)	lis	reg,name@ha
337 #define ADDROFF(name)			name@l
338 
339 /* offsets for stack frame layout */
340 #define LRSAVE	4
341 
342 #endif
343 
344 /* various errata or part fixups */
345 #if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E)
346 #define MFTB(dest)			\
347 90:	mfspr dest, SPRN_TBRL;		\
348 BEGIN_FTR_SECTION_NESTED(96);		\
349 	cmpwi dest,0;			\
350 	beq-  90b;			\
351 END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
352 #else
353 #define MFTB(dest)			MFTBL(dest)
354 #endif
355 
356 #ifdef CONFIG_PPC_8xx
357 #define MFTBL(dest)			mftb dest
358 #define MFTBU(dest)			mftbu dest
359 #else
360 #define MFTBL(dest)			mfspr dest, SPRN_TBRL
361 #define MFTBU(dest)			mfspr dest, SPRN_TBRU
362 #endif
363 
364 #ifndef CONFIG_SMP
365 #define TLBSYNC
366 #else
367 #define TLBSYNC		tlbsync; sync
368 #endif
369 
370 #ifdef CONFIG_PPC64
371 #define MTOCRF(FXM, RS)			\
372 	BEGIN_FTR_SECTION_NESTED(848);	\
373 	mtcrf	(FXM), RS;		\
374 	FTR_SECTION_ELSE_NESTED(848);	\
375 	mtocrf (FXM), RS;		\
376 	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848)
377 #endif
378 
379 /*
380  * This instruction is not implemented on the PPC 603 or 601; however, on
381  * the 403GCX and 405GP tlbia IS defined and tlbie is not.
382  * All of these instructions exist in the 8xx, they have magical powers,
383  * and they must be used.
384  */
385 
386 #if !defined(CONFIG_4xx) && !defined(CONFIG_PPC_8xx)
387 #define tlbia					\
388 	li	r4,1024;			\
389 	mtctr	r4;				\
390 	lis	r4,KERNELBASE@h;		\
391 	.machine push;				\
392 	.machine "power4";			\
393 0:	tlbie	r4;				\
394 	.machine pop;				\
395 	addi	r4,r4,0x1000;			\
396 	bdnz	0b
397 #endif
398 
399 
400 #ifdef CONFIG_IBM440EP_ERR42
401 #define PPC440EP_ERR42 isync
402 #else
403 #define PPC440EP_ERR42
404 #endif
405 
406 /* The following stops all load and store data streams associated with stream
407  * ID (ie. streams created explicitly).  The embedded and server mnemonics for
408  * dcbt are different so this must only be used for server.
409  */
410 #define DCBT_BOOK3S_STOP_ALL_STREAM_IDS(scratch)	\
411        lis     scratch,0x60000000@h;			\
412        dcbt    0,scratch,0b01010
413 
414 /*
415  * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them
416  * keep the address intact to be compatible with code shared with
417  * 32-bit classic.
418  *
419  * On the other hand, I find it useful to have them behave as expected
420  * by their name (ie always do the addition) on 64-bit BookE
421  */
422 #if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64)
423 #define toreal(rd)
424 #define fromreal(rd)
425 
426 /*
427  * We use addis to ensure compatibility with the "classic" ppc versions of
428  * these macros, which use rs = 0 to get the tophys offset in rd, rather than
429  * converting the address in r0, and so this version has to do that too
430  * (i.e. set register rd to 0 when rs == 0).
431  */
432 #define tophys(rd,rs)				\
433 	addis	rd,rs,0
434 
435 #define tovirt(rd,rs)				\
436 	addis	rd,rs,0
437 
438 #elif defined(CONFIG_PPC64)
439 #define toreal(rd)		/* we can access c000... in real mode */
440 #define fromreal(rd)
441 
442 #define tophys(rd,rs)                           \
443 	clrldi	rd,rs,2
444 
445 #define tovirt(rd,rs)                           \
446 	rotldi	rd,rs,16;			\
447 	ori	rd,rd,((KERNELBASE>>48)&0xFFFF);\
448 	rotldi	rd,rd,48
449 #else
450 #define toreal(rd)	tophys(rd,rd)
451 #define fromreal(rd)	tovirt(rd,rd)
452 
453 #define tophys(rd, rs)	addis	rd, rs, -PAGE_OFFSET@h
454 #define tovirt(rd, rs)	addis	rd, rs, PAGE_OFFSET@h
455 #endif
456 
457 #ifdef CONFIG_PPC_BOOK3S_64
458 #define MTMSRD(r)	mtmsrd	r
459 #define MTMSR_EERI(reg)	mtmsrd	reg,1
460 #else
461 #define MTMSRD(r)	mtmsr	r
462 #define MTMSR_EERI(reg)	mtmsr	reg
463 #endif
464 
465 #endif /* __KERNEL__ */
466 
467 /* The boring bits... */
468 
469 /* Condition Register Bit Fields */
470 
471 #define	cr0	0
472 #define	cr1	1
473 #define	cr2	2
474 #define	cr3	3
475 #define	cr4	4
476 #define	cr5	5
477 #define	cr6	6
478 #define	cr7	7
479 
480 
481 /*
482  * General Purpose Registers (GPRs)
483  *
484  * The lower case r0-r31 should be used in preference to the upper
485  * case R0-R31 as they provide more error checking in the assembler.
486  * Use R0-31 only when really nessesary.
487  */
488 
489 #define	r0	%r0
490 #define	r1	%r1
491 #define	r2	%r2
492 #define	r3	%r3
493 #define	r4	%r4
494 #define	r5	%r5
495 #define	r6	%r6
496 #define	r7	%r7
497 #define	r8	%r8
498 #define	r9	%r9
499 #define	r10	%r10
500 #define	r11	%r11
501 #define	r12	%r12
502 #define	r13	%r13
503 #define	r14	%r14
504 #define	r15	%r15
505 #define	r16	%r16
506 #define	r17	%r17
507 #define	r18	%r18
508 #define	r19	%r19
509 #define	r20	%r20
510 #define	r21	%r21
511 #define	r22	%r22
512 #define	r23	%r23
513 #define	r24	%r24
514 #define	r25	%r25
515 #define	r26	%r26
516 #define	r27	%r27
517 #define	r28	%r28
518 #define	r29	%r29
519 #define	r30	%r30
520 #define	r31	%r31
521 
522 
523 /* Floating Point Registers (FPRs) */
524 
525 #define	fr0	0
526 #define	fr1	1
527 #define	fr2	2
528 #define	fr3	3
529 #define	fr4	4
530 #define	fr5	5
531 #define	fr6	6
532 #define	fr7	7
533 #define	fr8	8
534 #define	fr9	9
535 #define	fr10	10
536 #define	fr11	11
537 #define	fr12	12
538 #define	fr13	13
539 #define	fr14	14
540 #define	fr15	15
541 #define	fr16	16
542 #define	fr17	17
543 #define	fr18	18
544 #define	fr19	19
545 #define	fr20	20
546 #define	fr21	21
547 #define	fr22	22
548 #define	fr23	23
549 #define	fr24	24
550 #define	fr25	25
551 #define	fr26	26
552 #define	fr27	27
553 #define	fr28	28
554 #define	fr29	29
555 #define	fr30	30
556 #define	fr31	31
557 
558 /* AltiVec Registers (VPRs) */
559 
560 #define	v0	0
561 #define	v1	1
562 #define	v2	2
563 #define	v3	3
564 #define	v4	4
565 #define	v5	5
566 #define	v6	6
567 #define	v7	7
568 #define	v8	8
569 #define	v9	9
570 #define	v10	10
571 #define	v11	11
572 #define	v12	12
573 #define	v13	13
574 #define	v14	14
575 #define	v15	15
576 #define	v16	16
577 #define	v17	17
578 #define	v18	18
579 #define	v19	19
580 #define	v20	20
581 #define	v21	21
582 #define	v22	22
583 #define	v23	23
584 #define	v24	24
585 #define	v25	25
586 #define	v26	26
587 #define	v27	27
588 #define	v28	28
589 #define	v29	29
590 #define	v30	30
591 #define	v31	31
592 
593 /* VSX Registers (VSRs) */
594 
595 #define	vs0	0
596 #define	vs1	1
597 #define	vs2	2
598 #define	vs3	3
599 #define	vs4	4
600 #define	vs5	5
601 #define	vs6	6
602 #define	vs7	7
603 #define	vs8	8
604 #define	vs9	9
605 #define	vs10	10
606 #define	vs11	11
607 #define	vs12	12
608 #define	vs13	13
609 #define	vs14	14
610 #define	vs15	15
611 #define	vs16	16
612 #define	vs17	17
613 #define	vs18	18
614 #define	vs19	19
615 #define	vs20	20
616 #define	vs21	21
617 #define	vs22	22
618 #define	vs23	23
619 #define	vs24	24
620 #define	vs25	25
621 #define	vs26	26
622 #define	vs27	27
623 #define	vs28	28
624 #define	vs29	29
625 #define	vs30	30
626 #define	vs31	31
627 #define	vs32	32
628 #define	vs33	33
629 #define	vs34	34
630 #define	vs35	35
631 #define	vs36	36
632 #define	vs37	37
633 #define	vs38	38
634 #define	vs39	39
635 #define	vs40	40
636 #define	vs41	41
637 #define	vs42	42
638 #define	vs43	43
639 #define	vs44	44
640 #define	vs45	45
641 #define	vs46	46
642 #define	vs47	47
643 #define	vs48	48
644 #define	vs49	49
645 #define	vs50	50
646 #define	vs51	51
647 #define	vs52	52
648 #define	vs53	53
649 #define	vs54	54
650 #define	vs55	55
651 #define	vs56	56
652 #define	vs57	57
653 #define	vs58	58
654 #define	vs59	59
655 #define	vs60	60
656 #define	vs61	61
657 #define	vs62	62
658 #define	vs63	63
659 
660 /* SPE Registers (EVPRs) */
661 
662 #define	evr0	0
663 #define	evr1	1
664 #define	evr2	2
665 #define	evr3	3
666 #define	evr4	4
667 #define	evr5	5
668 #define	evr6	6
669 #define	evr7	7
670 #define	evr8	8
671 #define	evr9	9
672 #define	evr10	10
673 #define	evr11	11
674 #define	evr12	12
675 #define	evr13	13
676 #define	evr14	14
677 #define	evr15	15
678 #define	evr16	16
679 #define	evr17	17
680 #define	evr18	18
681 #define	evr19	19
682 #define	evr20	20
683 #define	evr21	21
684 #define	evr22	22
685 #define	evr23	23
686 #define	evr24	24
687 #define	evr25	25
688 #define	evr26	26
689 #define	evr27	27
690 #define	evr28	28
691 #define	evr29	29
692 #define	evr30	30
693 #define	evr31	31
694 
695 #define RFSCV	.long 0x4c0000a4
696 
697 /*
698  * Create an endian fixup trampoline
699  *
700  * This starts with a "tdi 0,0,0x48" instruction which is
701  * essentially a "trap never", and thus akin to a nop.
702  *
703  * The opcode for this instruction read with the wrong endian
704  * however results in a b . + 8
705  *
706  * So essentially we use that trick to execute the following
707  * trampoline in "reverse endian" if we are running with the
708  * MSR_LE bit set the "wrong" way for whatever endianness the
709  * kernel is built for.
710  */
711 
712 #ifdef CONFIG_PPC_BOOK3E
713 #define FIXUP_ENDIAN
714 #else
715 /*
716  * This version may be used in HV or non-HV context.
717  * MSR[EE] must be disabled.
718  */
719 #define FIXUP_ENDIAN						   \
720 	tdi   0,0,0x48;	  /* Reverse endian of b . + 8		*/ \
721 	b     191f;	  /* Skip trampoline if endian is good	*/ \
722 	.long 0xa600607d; /* mfmsr r11				*/ \
723 	.long 0x01006b69; /* xori r11,r11,1			*/ \
724 	.long 0x00004039; /* li r10,0				*/ \
725 	.long 0x6401417d; /* mtmsrd r10,1			*/ \
726 	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
727 	.long 0xa602487d; /* mflr r10				*/ \
728 	.long 0x14004a39; /* addi r10,r10,20			*/ \
729 	.long 0xa6035a7d; /* mtsrr0 r10				*/ \
730 	.long 0xa6037b7d; /* mtsrr1 r11				*/ \
731 	.long 0x2400004c; /* rfid				*/ \
732 191:
733 
734 /*
735  * This version that may only be used with MSR[HV]=1
736  * - Does not clear MSR[RI], so more robust.
737  * - Slightly smaller and faster.
738  */
739 #define FIXUP_ENDIAN_HV						   \
740 	tdi   0,0,0x48;	  /* Reverse endian of b . + 8		*/ \
741 	b     191f;	  /* Skip trampoline if endian is good	*/ \
742 	.long 0xa600607d; /* mfmsr r11				*/ \
743 	.long 0x01006b69; /* xori r11,r11,1			*/ \
744 	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
745 	.long 0xa602487d; /* mflr r10				*/ \
746 	.long 0x14004a39; /* addi r10,r10,20			*/ \
747 	.long 0xa64b5a7d; /* mthsrr0 r10			*/ \
748 	.long 0xa64b7b7d; /* mthsrr1 r11			*/ \
749 	.long 0x2402004c; /* hrfid				*/ \
750 191:
751 
752 #endif /* !CONFIG_PPC_BOOK3E */
753 
754 #endif /*  __ASSEMBLY__ */
755 
756 #define SOFT_MASK_TABLE(_start, _end)		\
757 	stringify_in_c(.section __soft_mask_table,"a";)\
758 	stringify_in_c(.balign 8;)		\
759 	stringify_in_c(.llong (_start);)	\
760 	stringify_in_c(.llong (_end);)		\
761 	stringify_in_c(.previous)
762 
763 #define RESTART_TABLE(_start, _end, _target)	\
764 	stringify_in_c(.section __restart_table,"a";)\
765 	stringify_in_c(.balign 8;)		\
766 	stringify_in_c(.llong (_start);)	\
767 	stringify_in_c(.llong (_end);)		\
768 	stringify_in_c(.llong (_target);)	\
769 	stringify_in_c(.previous)
770 
771 #ifdef CONFIG_PPC_FSL_BOOK3E
772 #define BTB_FLUSH(reg)			\
773 	lis reg,BUCSR_INIT@h;		\
774 	ori reg,reg,BUCSR_INIT@l;	\
775 	mtspr SPRN_BUCSR,reg;		\
776 	isync;
777 #else
778 #define BTB_FLUSH(reg)
779 #endif /* CONFIG_PPC_FSL_BOOK3E */
780 
781 #endif /* _ASM_POWERPC_PPC_ASM_H */
782