1 /* 2 * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. 3 */ 4 #ifndef _ASM_POWERPC_PPC_ASM_H 5 #define _ASM_POWERPC_PPC_ASM_H 6 7 #include <linux/stringify.h> 8 #include <asm/asm-compat.h> 9 #include <asm/processor.h> 10 #include <asm/ppc-opcode.h> 11 #include <asm/firmware.h> 12 13 #ifdef __ASSEMBLY__ 14 15 #define SZL (BITS_PER_LONG/8) 16 17 /* 18 * Stuff for accurate CPU time accounting. 19 * These macros handle transitions between user and system state 20 * in exception entry and exit and accumulate time to the 21 * user_time and system_time fields in the paca. 22 */ 23 24 #ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE 25 #define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb) 26 #define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb) 27 #define ACCOUNT_STOLEN_TIME 28 #else 29 #define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb) \ 30 MFTB(ra); /* get timebase */ \ 31 PPC_LL rb, ACCOUNT_STARTTIME_USER(ptr); \ 32 PPC_STL ra, ACCOUNT_STARTTIME(ptr); \ 33 subf rb,rb,ra; /* subtract start value */ \ 34 PPC_LL ra, ACCOUNT_USER_TIME(ptr); \ 35 add ra,ra,rb; /* add on to user time */ \ 36 PPC_STL ra, ACCOUNT_USER_TIME(ptr); \ 37 38 #define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb) \ 39 MFTB(ra); /* get timebase */ \ 40 PPC_LL rb, ACCOUNT_STARTTIME(ptr); \ 41 PPC_STL ra, ACCOUNT_STARTTIME_USER(ptr); \ 42 subf rb,rb,ra; /* subtract start value */ \ 43 PPC_LL ra, ACCOUNT_SYSTEM_TIME(ptr); \ 44 add ra,ra,rb; /* add on to system time */ \ 45 PPC_STL ra, ACCOUNT_SYSTEM_TIME(ptr) 46 47 #ifdef CONFIG_PPC_SPLPAR 48 #define ACCOUNT_STOLEN_TIME \ 49 BEGIN_FW_FTR_SECTION; \ 50 beq 33f; \ 51 /* from user - see if there are any DTL entries to process */ \ 52 ld r10,PACALPPACAPTR(r13); /* get ptr to VPA */ \ 53 ld r11,PACA_DTL_RIDX(r13); /* get log read index */ \ 54 addi r10,r10,LPPACA_DTLIDX; \ 55 LDX_BE r10,0,r10; /* get log write index */ \ 56 cmpd cr1,r11,r10; \ 57 beq+ cr1,33f; \ 58 bl accumulate_stolen_time; \ 59 ld r12,_MSR(r1); \ 60 andi. r10,r12,MSR_PR; /* Restore cr0 (coming from user) */ \ 61 33: \ 62 END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) 63 64 #else /* CONFIG_PPC_SPLPAR */ 65 #define ACCOUNT_STOLEN_TIME 66 67 #endif /* CONFIG_PPC_SPLPAR */ 68 69 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ 70 71 /* 72 * Macros for storing registers into and loading registers from 73 * exception frames. 74 */ 75 #ifdef __powerpc64__ 76 #define SAVE_GPR(n, base) std n,GPR0+8*(n)(base) 77 #define REST_GPR(n, base) ld n,GPR0+8*(n)(base) 78 #define SAVE_NVGPRS(base) SAVE_8GPRS(14, base); SAVE_10GPRS(22, base) 79 #define REST_NVGPRS(base) REST_8GPRS(14, base); REST_10GPRS(22, base) 80 #else 81 #define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base) 82 #define REST_GPR(n, base) lwz n,GPR0+4*(n)(base) 83 #define SAVE_NVGPRS(base) SAVE_GPR(13, base); SAVE_8GPRS(14, base); \ 84 SAVE_10GPRS(22, base) 85 #define REST_NVGPRS(base) REST_GPR(13, base); REST_8GPRS(14, base); \ 86 REST_10GPRS(22, base) 87 #endif 88 89 #define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) 90 #define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) 91 #define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) 92 #define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) 93 #define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) 94 #define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) 95 #define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) 96 #define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) 97 98 #define SAVE_FPR(n, base) stfd n,8*TS_FPRWIDTH*(n)(base) 99 #define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) 100 #define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) 101 #define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) 102 #define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) 103 #define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) 104 #define REST_FPR(n, base) lfd n,8*TS_FPRWIDTH*(n)(base) 105 #define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) 106 #define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) 107 #define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) 108 #define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) 109 #define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) 110 111 #define SAVE_VR(n,b,base) li b,16*(n); stvx n,base,b 112 #define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) 113 #define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) 114 #define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) 115 #define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) 116 #define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) 117 #define REST_VR(n,b,base) li b,16*(n); lvx n,base,b 118 #define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) 119 #define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) 120 #define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) 121 #define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) 122 #define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) 123 124 #ifdef __BIG_ENDIAN__ 125 #define STXVD2X_ROT(n,b,base) STXVD2X(n,b,base) 126 #define LXVD2X_ROT(n,b,base) LXVD2X(n,b,base) 127 #else 128 #define STXVD2X_ROT(n,b,base) XXSWAPD(n,n); \ 129 STXVD2X(n,b,base); \ 130 XXSWAPD(n,n) 131 132 #define LXVD2X_ROT(n,b,base) LXVD2X(n,b,base); \ 133 XXSWAPD(n,n) 134 #endif 135 /* Save the lower 32 VSRs in the thread VSR region */ 136 #define SAVE_VSR(n,b,base) li b,16*(n); STXVD2X_ROT(n,R##base,R##b) 137 #define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) 138 #define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) 139 #define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) 140 #define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) 141 #define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) 142 #define REST_VSR(n,b,base) li b,16*(n); LXVD2X_ROT(n,R##base,R##b) 143 #define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) 144 #define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) 145 #define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) 146 #define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) 147 #define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) 148 149 /* 150 * b = base register for addressing, o = base offset from register of 1st EVR 151 * n = first EVR, s = scratch 152 */ 153 #define SAVE_EVR(n,s,b,o) evmergehi s,s,n; stw s,o+4*(n)(b) 154 #define SAVE_2EVRS(n,s,b,o) SAVE_EVR(n,s,b,o); SAVE_EVR(n+1,s,b,o) 155 #define SAVE_4EVRS(n,s,b,o) SAVE_2EVRS(n,s,b,o); SAVE_2EVRS(n+2,s,b,o) 156 #define SAVE_8EVRS(n,s,b,o) SAVE_4EVRS(n,s,b,o); SAVE_4EVRS(n+4,s,b,o) 157 #define SAVE_16EVRS(n,s,b,o) SAVE_8EVRS(n,s,b,o); SAVE_8EVRS(n+8,s,b,o) 158 #define SAVE_32EVRS(n,s,b,o) SAVE_16EVRS(n,s,b,o); SAVE_16EVRS(n+16,s,b,o) 159 #define REST_EVR(n,s,b,o) lwz s,o+4*(n)(b); evmergelo n,s,n 160 #define REST_2EVRS(n,s,b,o) REST_EVR(n,s,b,o); REST_EVR(n+1,s,b,o) 161 #define REST_4EVRS(n,s,b,o) REST_2EVRS(n,s,b,o); REST_2EVRS(n+2,s,b,o) 162 #define REST_8EVRS(n,s,b,o) REST_4EVRS(n,s,b,o); REST_4EVRS(n+4,s,b,o) 163 #define REST_16EVRS(n,s,b,o) REST_8EVRS(n,s,b,o); REST_8EVRS(n+8,s,b,o) 164 #define REST_32EVRS(n,s,b,o) REST_16EVRS(n,s,b,o); REST_16EVRS(n+16,s,b,o) 165 166 /* Macros to adjust thread priority for hardware multithreading */ 167 #define HMT_VERY_LOW or 31,31,31 # very low priority 168 #define HMT_LOW or 1,1,1 169 #define HMT_MEDIUM_LOW or 6,6,6 # medium low priority 170 #define HMT_MEDIUM or 2,2,2 171 #define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority 172 #define HMT_HIGH or 3,3,3 173 #define HMT_EXTRA_HIGH or 7,7,7 # power7 only 174 175 #ifdef CONFIG_PPC64 176 #define ULONG_SIZE 8 177 #else 178 #define ULONG_SIZE 4 179 #endif 180 #define __VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE)) 181 #define VCPU_GPR(n) __VCPU_GPR(__REG_##n) 182 183 #ifdef __KERNEL__ 184 #ifdef CONFIG_PPC64 185 186 #define STACKFRAMESIZE 256 187 #define __STK_REG(i) (112 + ((i)-14)*8) 188 #define STK_REG(i) __STK_REG(__REG_##i) 189 190 #ifdef PPC64_ELF_ABI_v2 191 #define STK_GOT 24 192 #define __STK_PARAM(i) (32 + ((i)-3)*8) 193 #else 194 #define STK_GOT 40 195 #define __STK_PARAM(i) (48 + ((i)-3)*8) 196 #endif 197 #define STK_PARAM(i) __STK_PARAM(__REG_##i) 198 199 #ifdef PPC64_ELF_ABI_v2 200 201 #define _GLOBAL(name) \ 202 .align 2 ; \ 203 .type name,@function; \ 204 .globl name; \ 205 name: 206 207 #define _GLOBAL_TOC(name) \ 208 .align 2 ; \ 209 .type name,@function; \ 210 .globl name; \ 211 name: \ 212 0: addis r2,r12,(.TOC.-0b)@ha; \ 213 addi r2,r2,(.TOC.-0b)@l; \ 214 .localentry name,.-name 215 216 #define DOTSYM(a) a 217 218 #else 219 220 #define XGLUE(a,b) a##b 221 #define GLUE(a,b) XGLUE(a,b) 222 223 #define _GLOBAL(name) \ 224 .align 2 ; \ 225 .globl name; \ 226 .globl GLUE(.,name); \ 227 .pushsection ".opd","aw"; \ 228 name: \ 229 .quad GLUE(.,name); \ 230 .quad .TOC.@tocbase; \ 231 .quad 0; \ 232 .popsection; \ 233 .type GLUE(.,name),@function; \ 234 GLUE(.,name): 235 236 #define _GLOBAL_TOC(name) _GLOBAL(name) 237 238 #define DOTSYM(a) GLUE(.,a) 239 240 #endif 241 242 #else /* 32-bit */ 243 244 #define _ENTRY(n) \ 245 .globl n; \ 246 n: 247 248 #define _GLOBAL(n) \ 249 .stabs __stringify(n:F-1),N_FUN,0,0,n;\ 250 .globl n; \ 251 n: 252 253 #define _GLOBAL_TOC(name) _GLOBAL(name) 254 255 #endif 256 257 /* 258 * __kprobes (the C annotation) puts the symbol into the .kprobes.text 259 * section, which gets emitted at the end of regular text. 260 * 261 * _ASM_NOKPROBE_SYMBOL and NOKPROBE_SYMBOL just adds the symbol to 262 * a blacklist. The former is for core kprobe functions/data, the 263 * latter is for those that incdentially must be excluded from probing 264 * and allows them to be linked at more optimal location within text. 265 */ 266 #ifdef CONFIG_KPROBES 267 #define _ASM_NOKPROBE_SYMBOL(entry) \ 268 .pushsection "_kprobe_blacklist","aw"; \ 269 PPC_LONG (entry) ; \ 270 .popsection 271 #else 272 #define _ASM_NOKPROBE_SYMBOL(entry) 273 #endif 274 275 #define FUNC_START(name) _GLOBAL(name) 276 #define FUNC_END(name) 277 278 /* 279 * LOAD_REG_IMMEDIATE(rn, expr) 280 * Loads the value of the constant expression 'expr' into register 'rn' 281 * using immediate instructions only. Use this when it's important not 282 * to reference other data (i.e. on ppc64 when the TOC pointer is not 283 * valid) and when 'expr' is a constant or absolute address. 284 * 285 * LOAD_REG_ADDR(rn, name) 286 * Loads the address of label 'name' into register 'rn'. Use this when 287 * you don't particularly need immediate instructions only, but you need 288 * the whole address in one register (e.g. it's a structure address and 289 * you want to access various offsets within it). On ppc32 this is 290 * identical to LOAD_REG_IMMEDIATE. 291 * 292 * LOAD_REG_ADDR_PIC(rn, name) 293 * Loads the address of label 'name' into register 'run'. Use this when 294 * the kernel doesn't run at the linked or relocated address. Please 295 * note that this macro will clobber the lr register. 296 * 297 * LOAD_REG_ADDRBASE(rn, name) 298 * ADDROFF(name) 299 * LOAD_REG_ADDRBASE loads part of the address of label 'name' into 300 * register 'rn'. ADDROFF(name) returns the remainder of the address as 301 * a constant expression. ADDROFF(name) is a signed expression < 16 bits 302 * in size, so is suitable for use directly as an offset in load and store 303 * instructions. Use this when loading/storing a single word or less as: 304 * LOAD_REG_ADDRBASE(rX, name) 305 * ld rY,ADDROFF(name)(rX) 306 */ 307 308 /* Be careful, this will clobber the lr register. */ 309 #define LOAD_REG_ADDR_PIC(reg, name) \ 310 bl 0f; \ 311 0: mflr reg; \ 312 addis reg,reg,(name - 0b)@ha; \ 313 addi reg,reg,(name - 0b)@l; 314 315 #ifdef __powerpc64__ 316 #ifdef HAVE_AS_ATHIGH 317 #define __AS_ATHIGH high 318 #else 319 #define __AS_ATHIGH h 320 #endif 321 #define LOAD_REG_IMMEDIATE(reg,expr) \ 322 lis reg,(expr)@highest; \ 323 ori reg,reg,(expr)@higher; \ 324 rldicr reg,reg,32,31; \ 325 oris reg,reg,(expr)@__AS_ATHIGH; \ 326 ori reg,reg,(expr)@l; 327 328 #define LOAD_REG_ADDR(reg,name) \ 329 ld reg,name@got(r2) 330 331 #define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name) 332 #define ADDROFF(name) 0 333 334 /* offsets for stack frame layout */ 335 #define LRSAVE 16 336 337 #else /* 32-bit */ 338 339 #define LOAD_REG_IMMEDIATE(reg,expr) \ 340 lis reg,(expr)@ha; \ 341 addi reg,reg,(expr)@l; 342 343 #define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE(reg, name) 344 345 #define LOAD_REG_ADDRBASE(reg, name) lis reg,name@ha 346 #define ADDROFF(name) name@l 347 348 /* offsets for stack frame layout */ 349 #define LRSAVE 4 350 351 #endif 352 353 /* various errata or part fixups */ 354 #ifdef CONFIG_PPC601_SYNC_FIX 355 #define SYNC \ 356 BEGIN_FTR_SECTION \ 357 sync; \ 358 isync; \ 359 END_FTR_SECTION_IFSET(CPU_FTR_601) 360 #define SYNC_601 \ 361 BEGIN_FTR_SECTION \ 362 sync; \ 363 END_FTR_SECTION_IFSET(CPU_FTR_601) 364 #define ISYNC_601 \ 365 BEGIN_FTR_SECTION \ 366 isync; \ 367 END_FTR_SECTION_IFSET(CPU_FTR_601) 368 #else 369 #define SYNC 370 #define SYNC_601 371 #define ISYNC_601 372 #endif 373 374 #if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E) 375 #define MFTB(dest) \ 376 90: mfspr dest, SPRN_TBRL; \ 377 BEGIN_FTR_SECTION_NESTED(96); \ 378 cmpwi dest,0; \ 379 beq- 90b; \ 380 END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) 381 #elif defined(CONFIG_8xx) 382 #define MFTB(dest) mftb dest 383 #else 384 #define MFTB(dest) mfspr dest, SPRN_TBRL 385 #endif 386 387 #ifndef CONFIG_SMP 388 #define TLBSYNC 389 #else /* CONFIG_SMP */ 390 /* tlbsync is not implemented on 601 */ 391 #define TLBSYNC \ 392 BEGIN_FTR_SECTION \ 393 tlbsync; \ 394 sync; \ 395 END_FTR_SECTION_IFCLR(CPU_FTR_601) 396 #endif 397 398 #ifdef CONFIG_PPC64 399 #define MTOCRF(FXM, RS) \ 400 BEGIN_FTR_SECTION_NESTED(848); \ 401 mtcrf (FXM), RS; \ 402 FTR_SECTION_ELSE_NESTED(848); \ 403 mtocrf (FXM), RS; \ 404 ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848) 405 #endif 406 407 /* 408 * This instruction is not implemented on the PPC 603 or 601; however, on 409 * the 403GCX and 405GP tlbia IS defined and tlbie is not. 410 * All of these instructions exist in the 8xx, they have magical powers, 411 * and they must be used. 412 */ 413 414 #if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) 415 #define tlbia \ 416 li r4,1024; \ 417 mtctr r4; \ 418 lis r4,KERNELBASE@h; \ 419 .machine push; \ 420 .machine "power4"; \ 421 0: tlbie r4; \ 422 .machine pop; \ 423 addi r4,r4,0x1000; \ 424 bdnz 0b 425 #endif 426 427 428 #ifdef CONFIG_IBM440EP_ERR42 429 #define PPC440EP_ERR42 isync 430 #else 431 #define PPC440EP_ERR42 432 #endif 433 434 /* The following stops all load and store data streams associated with stream 435 * ID (ie. streams created explicitly). The embedded and server mnemonics for 436 * dcbt are different so we use machine "power4" here explicitly. 437 */ 438 #define DCBT_STOP_ALL_STREAM_IDS(scratch) \ 439 .machine push ; \ 440 .machine "power4" ; \ 441 lis scratch,0x60000000@h; \ 442 dcbt r0,scratch,0b01010; \ 443 .machine pop 444 445 /* 446 * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them 447 * keep the address intact to be compatible with code shared with 448 * 32-bit classic. 449 * 450 * On the other hand, I find it useful to have them behave as expected 451 * by their name (ie always do the addition) on 64-bit BookE 452 */ 453 #if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64) 454 #define toreal(rd) 455 #define fromreal(rd) 456 457 /* 458 * We use addis to ensure compatibility with the "classic" ppc versions of 459 * these macros, which use rs = 0 to get the tophys offset in rd, rather than 460 * converting the address in r0, and so this version has to do that too 461 * (i.e. set register rd to 0 when rs == 0). 462 */ 463 #define tophys(rd,rs) \ 464 addis rd,rs,0 465 466 #define tovirt(rd,rs) \ 467 addis rd,rs,0 468 469 #elif defined(CONFIG_PPC64) 470 #define toreal(rd) /* we can access c000... in real mode */ 471 #define fromreal(rd) 472 473 #define tophys(rd,rs) \ 474 clrldi rd,rs,2 475 476 #define tovirt(rd,rs) \ 477 rotldi rd,rs,16; \ 478 ori rd,rd,((KERNELBASE>>48)&0xFFFF);\ 479 rotldi rd,rd,48 480 #else 481 /* 482 * On APUS (Amiga PowerPC cpu upgrade board), we don't know the 483 * physical base address of RAM at compile time. 484 */ 485 #define toreal(rd) tophys(rd,rd) 486 #define fromreal(rd) tovirt(rd,rd) 487 488 #define tophys(rd,rs) \ 489 0: addis rd,rs,-PAGE_OFFSET@h; \ 490 .section ".vtop_fixup","aw"; \ 491 .align 1; \ 492 .long 0b; \ 493 .previous 494 495 #define tovirt(rd,rs) \ 496 0: addis rd,rs,PAGE_OFFSET@h; \ 497 .section ".ptov_fixup","aw"; \ 498 .align 1; \ 499 .long 0b; \ 500 .previous 501 #endif 502 503 #ifdef CONFIG_PPC_BOOK3S_64 504 #define RFI rfid 505 #define MTMSRD(r) mtmsrd r 506 #define MTMSR_EERI(reg) mtmsrd reg,1 507 #else 508 #ifndef CONFIG_40x 509 #define RFI rfi 510 #else 511 #define RFI rfi; b . /* Prevent prefetch past rfi */ 512 #endif 513 #define MTMSRD(r) mtmsr r 514 #define MTMSR_EERI(reg) mtmsr reg 515 #endif 516 517 #endif /* __KERNEL__ */ 518 519 /* The boring bits... */ 520 521 /* Condition Register Bit Fields */ 522 523 #define cr0 0 524 #define cr1 1 525 #define cr2 2 526 #define cr3 3 527 #define cr4 4 528 #define cr5 5 529 #define cr6 6 530 #define cr7 7 531 532 533 /* 534 * General Purpose Registers (GPRs) 535 * 536 * The lower case r0-r31 should be used in preference to the upper 537 * case R0-R31 as they provide more error checking in the assembler. 538 * Use R0-31 only when really nessesary. 539 */ 540 541 #define r0 %r0 542 #define r1 %r1 543 #define r2 %r2 544 #define r3 %r3 545 #define r4 %r4 546 #define r5 %r5 547 #define r6 %r6 548 #define r7 %r7 549 #define r8 %r8 550 #define r9 %r9 551 #define r10 %r10 552 #define r11 %r11 553 #define r12 %r12 554 #define r13 %r13 555 #define r14 %r14 556 #define r15 %r15 557 #define r16 %r16 558 #define r17 %r17 559 #define r18 %r18 560 #define r19 %r19 561 #define r20 %r20 562 #define r21 %r21 563 #define r22 %r22 564 #define r23 %r23 565 #define r24 %r24 566 #define r25 %r25 567 #define r26 %r26 568 #define r27 %r27 569 #define r28 %r28 570 #define r29 %r29 571 #define r30 %r30 572 #define r31 %r31 573 574 575 /* Floating Point Registers (FPRs) */ 576 577 #define fr0 0 578 #define fr1 1 579 #define fr2 2 580 #define fr3 3 581 #define fr4 4 582 #define fr5 5 583 #define fr6 6 584 #define fr7 7 585 #define fr8 8 586 #define fr9 9 587 #define fr10 10 588 #define fr11 11 589 #define fr12 12 590 #define fr13 13 591 #define fr14 14 592 #define fr15 15 593 #define fr16 16 594 #define fr17 17 595 #define fr18 18 596 #define fr19 19 597 #define fr20 20 598 #define fr21 21 599 #define fr22 22 600 #define fr23 23 601 #define fr24 24 602 #define fr25 25 603 #define fr26 26 604 #define fr27 27 605 #define fr28 28 606 #define fr29 29 607 #define fr30 30 608 #define fr31 31 609 610 /* AltiVec Registers (VPRs) */ 611 612 #define v0 0 613 #define v1 1 614 #define v2 2 615 #define v3 3 616 #define v4 4 617 #define v5 5 618 #define v6 6 619 #define v7 7 620 #define v8 8 621 #define v9 9 622 #define v10 10 623 #define v11 11 624 #define v12 12 625 #define v13 13 626 #define v14 14 627 #define v15 15 628 #define v16 16 629 #define v17 17 630 #define v18 18 631 #define v19 19 632 #define v20 20 633 #define v21 21 634 #define v22 22 635 #define v23 23 636 #define v24 24 637 #define v25 25 638 #define v26 26 639 #define v27 27 640 #define v28 28 641 #define v29 29 642 #define v30 30 643 #define v31 31 644 645 /* VSX Registers (VSRs) */ 646 647 #define vs0 0 648 #define vs1 1 649 #define vs2 2 650 #define vs3 3 651 #define vs4 4 652 #define vs5 5 653 #define vs6 6 654 #define vs7 7 655 #define vs8 8 656 #define vs9 9 657 #define vs10 10 658 #define vs11 11 659 #define vs12 12 660 #define vs13 13 661 #define vs14 14 662 #define vs15 15 663 #define vs16 16 664 #define vs17 17 665 #define vs18 18 666 #define vs19 19 667 #define vs20 20 668 #define vs21 21 669 #define vs22 22 670 #define vs23 23 671 #define vs24 24 672 #define vs25 25 673 #define vs26 26 674 #define vs27 27 675 #define vs28 28 676 #define vs29 29 677 #define vs30 30 678 #define vs31 31 679 #define vs32 32 680 #define vs33 33 681 #define vs34 34 682 #define vs35 35 683 #define vs36 36 684 #define vs37 37 685 #define vs38 38 686 #define vs39 39 687 #define vs40 40 688 #define vs41 41 689 #define vs42 42 690 #define vs43 43 691 #define vs44 44 692 #define vs45 45 693 #define vs46 46 694 #define vs47 47 695 #define vs48 48 696 #define vs49 49 697 #define vs50 50 698 #define vs51 51 699 #define vs52 52 700 #define vs53 53 701 #define vs54 54 702 #define vs55 55 703 #define vs56 56 704 #define vs57 57 705 #define vs58 58 706 #define vs59 59 707 #define vs60 60 708 #define vs61 61 709 #define vs62 62 710 #define vs63 63 711 712 /* SPE Registers (EVPRs) */ 713 714 #define evr0 0 715 #define evr1 1 716 #define evr2 2 717 #define evr3 3 718 #define evr4 4 719 #define evr5 5 720 #define evr6 6 721 #define evr7 7 722 #define evr8 8 723 #define evr9 9 724 #define evr10 10 725 #define evr11 11 726 #define evr12 12 727 #define evr13 13 728 #define evr14 14 729 #define evr15 15 730 #define evr16 16 731 #define evr17 17 732 #define evr18 18 733 #define evr19 19 734 #define evr20 20 735 #define evr21 21 736 #define evr22 22 737 #define evr23 23 738 #define evr24 24 739 #define evr25 25 740 #define evr26 26 741 #define evr27 27 742 #define evr28 28 743 #define evr29 29 744 #define evr30 30 745 #define evr31 31 746 747 /* some stab codes */ 748 #define N_FUN 36 749 #define N_RSYM 64 750 #define N_SLINE 68 751 #define N_SO 100 752 753 /* 754 * Create an endian fixup trampoline 755 * 756 * This starts with a "tdi 0,0,0x48" instruction which is 757 * essentially a "trap never", and thus akin to a nop. 758 * 759 * The opcode for this instruction read with the wrong endian 760 * however results in a b . + 8 761 * 762 * So essentially we use that trick to execute the following 763 * trampoline in "reverse endian" if we are running with the 764 * MSR_LE bit set the "wrong" way for whatever endianness the 765 * kernel is built for. 766 */ 767 768 #ifdef CONFIG_PPC_BOOK3E 769 #define FIXUP_ENDIAN 770 #else 771 #define FIXUP_ENDIAN \ 772 tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \ 773 b $+36; /* Skip trampoline if endian is good */ \ 774 .long 0x05009f42; /* bcl 20,31,$+4 */ \ 775 .long 0xa602487d; /* mflr r10 */ \ 776 .long 0x1c004a39; /* addi r10,r10,28 */ \ 777 .long 0xa600607d; /* mfmsr r11 */ \ 778 .long 0x01006b69; /* xori r11,r11,1 */ \ 779 .long 0xa6035a7d; /* mtsrr0 r10 */ \ 780 .long 0xa6037b7d; /* mtsrr1 r11 */ \ 781 .long 0x2400004c /* rfid */ 782 #endif /* !CONFIG_PPC_BOOK3E */ 783 784 #endif /* __ASSEMBLY__ */ 785 786 /* 787 * Helper macro for exception table entries 788 */ 789 #define EX_TABLE(_fault, _target) \ 790 stringify_in_c(.section __ex_table,"a";)\ 791 stringify_in_c(.balign 4;) \ 792 stringify_in_c(.long (_fault) - . ;) \ 793 stringify_in_c(.long (_target) - . ;) \ 794 stringify_in_c(.previous) 795 796 #endif /* _ASM_POWERPC_PPC_ASM_H */ 797