1 #ifndef _ASM_POWERPC_MPIC_H 2 #define _ASM_POWERPC_MPIC_H 3 #ifdef __KERNEL__ 4 5 #include <linux/irq.h> 6 #include <asm/dcr.h> 7 #include <asm/msi_bitmap.h> 8 9 /* 10 * Global registers 11 */ 12 13 #define MPIC_GREG_BASE 0x01000 14 15 #define MPIC_GREG_FEATURE_0 0x00000 16 #define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 17 #define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 18 #define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 19 #define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 20 #define MPIC_GREG_FEATURE_VERSION_MASK 0xff 21 #define MPIC_GREG_FEATURE_1 0x00010 22 #define MPIC_GREG_GLOBAL_CONF_0 0x00020 23 #define MPIC_GREG_GCONF_RESET 0x80000000 24 /* On the FSL mpic implementations the Mode field is expand to be 25 * 2 bits wide: 26 * 0b00 = pass through (interrupts routed to IRQ0) 27 * 0b01 = Mixed mode 28 * 0b10 = reserved 29 * 0b11 = External proxy / coreint 30 */ 31 #define MPIC_GREG_GCONF_COREINT 0x60000000 32 #define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 33 #define MPIC_GREG_GCONF_NO_BIAS 0x10000000 34 #define MPIC_GREG_GCONF_BASE_MASK 0x000fffff 35 #define MPIC_GREG_GCONF_MCK 0x08000000 36 #define MPIC_GREG_GLOBAL_CONF_1 0x00030 37 #define MPIC_GREG_GLOBAL_CONF_1_SIE 0x08000000 38 #define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK 0x70000000 39 #define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r) \ 40 (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK) 41 #define MPIC_GREG_VENDOR_0 0x00040 42 #define MPIC_GREG_VENDOR_1 0x00050 43 #define MPIC_GREG_VENDOR_2 0x00060 44 #define MPIC_GREG_VENDOR_3 0x00070 45 #define MPIC_GREG_VENDOR_ID 0x00080 46 #define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 47 #define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 48 #define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 49 #define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 50 #define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff 51 #define MPIC_GREG_PROCESSOR_INIT 0x00090 52 #define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 53 #define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 54 #define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 55 #define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 56 #define MPIC_GREG_IPI_STRIDE 0x10 57 #define MPIC_GREG_SPURIOUS 0x000e0 58 #define MPIC_GREG_TIMER_FREQ 0x000f0 59 60 /* 61 * 62 * Timer registers 63 */ 64 #define MPIC_TIMER_BASE 0x01100 65 #define MPIC_TIMER_STRIDE 0x40 66 #define MPIC_TIMER_GROUP_STRIDE 0x1000 67 68 #define MPIC_TIMER_CURRENT_CNT 0x00000 69 #define MPIC_TIMER_BASE_CNT 0x00010 70 #define MPIC_TIMER_VECTOR_PRI 0x00020 71 #define MPIC_TIMER_DESTINATION 0x00030 72 73 /* 74 * Per-Processor registers 75 */ 76 77 #define MPIC_CPU_THISBASE 0x00000 78 #define MPIC_CPU_BASE 0x20000 79 #define MPIC_CPU_STRIDE 0x01000 80 81 #define MPIC_CPU_IPI_DISPATCH_0 0x00040 82 #define MPIC_CPU_IPI_DISPATCH_1 0x00050 83 #define MPIC_CPU_IPI_DISPATCH_2 0x00060 84 #define MPIC_CPU_IPI_DISPATCH_3 0x00070 85 #define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010 86 #define MPIC_CPU_CURRENT_TASK_PRI 0x00080 87 #define MPIC_CPU_TASKPRI_MASK 0x0000000f 88 #define MPIC_CPU_WHOAMI 0x00090 89 #define MPIC_CPU_WHOAMI_MASK 0x0000001f 90 #define MPIC_CPU_INTACK 0x000a0 91 #define MPIC_CPU_EOI 0x000b0 92 #define MPIC_CPU_MCACK 0x000c0 93 94 /* 95 * Per-source registers 96 */ 97 98 #define MPIC_IRQ_BASE 0x10000 99 #define MPIC_IRQ_STRIDE 0x00020 100 #define MPIC_IRQ_VECTOR_PRI 0x00000 101 #define MPIC_VECPRI_MASK 0x80000000 102 #define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ 103 #define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 104 #define MPIC_VECPRI_PRIORITY_SHIFT 16 105 #define MPIC_VECPRI_VECTOR_MASK 0x000007ff 106 #define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 107 #define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 108 #define MPIC_VECPRI_POLARITY_MASK 0x00800000 109 #define MPIC_VECPRI_SENSE_LEVEL 0x00400000 110 #define MPIC_VECPRI_SENSE_EDGE 0x00000000 111 #define MPIC_VECPRI_SENSE_MASK 0x00400000 112 #define MPIC_IRQ_DESTINATION 0x00010 113 114 #define MPIC_FSL_BRR1 0x00000 115 #define MPIC_FSL_BRR1_VER 0x0000ffff 116 117 #define MPIC_MAX_IRQ_SOURCES 2048 118 #define MPIC_MAX_CPUS 32 119 #define MPIC_MAX_ISU 32 120 121 #define MPIC_MAX_ERR 32 122 #define MPIC_FSL_ERR_INT 16 123 124 /* 125 * Tsi108 implementation of MPIC has many differences from the original one 126 */ 127 128 /* 129 * Global registers 130 */ 131 132 #define TSI108_GREG_BASE 0x00000 133 #define TSI108_GREG_FEATURE_0 0x00000 134 #define TSI108_GREG_GLOBAL_CONF_0 0x00004 135 #define TSI108_GREG_VENDOR_ID 0x0000c 136 #define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */ 137 #define TSI108_GREG_IPI_STRIDE 0x0c 138 #define TSI108_GREG_SPURIOUS 0x00010 139 #define TSI108_GREG_TIMER_FREQ 0x00014 140 141 /* 142 * Timer registers 143 */ 144 #define TSI108_TIMER_BASE 0x0030 145 #define TSI108_TIMER_STRIDE 0x10 146 #define TSI108_TIMER_CURRENT_CNT 0x00000 147 #define TSI108_TIMER_BASE_CNT 0x00004 148 #define TSI108_TIMER_VECTOR_PRI 0x00008 149 #define TSI108_TIMER_DESTINATION 0x0000c 150 151 /* 152 * Per-Processor registers 153 */ 154 #define TSI108_CPU_BASE 0x00300 155 #define TSI108_CPU_STRIDE 0x00040 156 #define TSI108_CPU_IPI_DISPATCH_0 0x00200 157 #define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000 158 #define TSI108_CPU_CURRENT_TASK_PRI 0x00000 159 #define TSI108_CPU_WHOAMI 0xffffffff 160 #define TSI108_CPU_INTACK 0x00004 161 #define TSI108_CPU_EOI 0x00008 162 #define TSI108_CPU_MCACK 0x00004 /* Doesn't really exist here */ 163 164 /* 165 * Per-source registers 166 */ 167 #define TSI108_IRQ_BASE 0x00100 168 #define TSI108_IRQ_STRIDE 0x00008 169 #define TSI108_IRQ_VECTOR_PRI 0x00000 170 #define TSI108_VECPRI_VECTOR_MASK 0x000000ff 171 #define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000 172 #define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000 173 #define TSI108_VECPRI_SENSE_LEVEL 0x02000000 174 #define TSI108_VECPRI_SENSE_EDGE 0x00000000 175 #define TSI108_VECPRI_POLARITY_MASK 0x01000000 176 #define TSI108_VECPRI_SENSE_MASK 0x02000000 177 #define TSI108_IRQ_DESTINATION 0x00004 178 179 /* weird mpic register indices and mask bits in the HW info array */ 180 enum { 181 MPIC_IDX_GREG_BASE = 0, 182 MPIC_IDX_GREG_FEATURE_0, 183 MPIC_IDX_GREG_GLOBAL_CONF_0, 184 MPIC_IDX_GREG_VENDOR_ID, 185 MPIC_IDX_GREG_IPI_VECTOR_PRI_0, 186 MPIC_IDX_GREG_IPI_STRIDE, 187 MPIC_IDX_GREG_SPURIOUS, 188 MPIC_IDX_GREG_TIMER_FREQ, 189 190 MPIC_IDX_TIMER_BASE, 191 MPIC_IDX_TIMER_STRIDE, 192 MPIC_IDX_TIMER_CURRENT_CNT, 193 MPIC_IDX_TIMER_BASE_CNT, 194 MPIC_IDX_TIMER_VECTOR_PRI, 195 MPIC_IDX_TIMER_DESTINATION, 196 197 MPIC_IDX_CPU_BASE, 198 MPIC_IDX_CPU_STRIDE, 199 MPIC_IDX_CPU_IPI_DISPATCH_0, 200 MPIC_IDX_CPU_IPI_DISPATCH_STRIDE, 201 MPIC_IDX_CPU_CURRENT_TASK_PRI, 202 MPIC_IDX_CPU_WHOAMI, 203 MPIC_IDX_CPU_INTACK, 204 MPIC_IDX_CPU_EOI, 205 MPIC_IDX_CPU_MCACK, 206 207 MPIC_IDX_IRQ_BASE, 208 MPIC_IDX_IRQ_STRIDE, 209 MPIC_IDX_IRQ_VECTOR_PRI, 210 211 MPIC_IDX_VECPRI_VECTOR_MASK, 212 MPIC_IDX_VECPRI_POLARITY_POSITIVE, 213 MPIC_IDX_VECPRI_POLARITY_NEGATIVE, 214 MPIC_IDX_VECPRI_SENSE_LEVEL, 215 MPIC_IDX_VECPRI_SENSE_EDGE, 216 MPIC_IDX_VECPRI_POLARITY_MASK, 217 MPIC_IDX_VECPRI_SENSE_MASK, 218 MPIC_IDX_IRQ_DESTINATION, 219 MPIC_IDX_END 220 }; 221 222 223 #ifdef CONFIG_MPIC_U3_HT_IRQS 224 /* Fixup table entry */ 225 struct mpic_irq_fixup 226 { 227 u8 __iomem *base; 228 u8 __iomem *applebase; 229 u32 data; 230 unsigned int index; 231 }; 232 #endif /* CONFIG_MPIC_U3_HT_IRQS */ 233 234 235 enum mpic_reg_type { 236 mpic_access_mmio_le, 237 mpic_access_mmio_be, 238 #ifdef CONFIG_PPC_DCR 239 mpic_access_dcr 240 #endif 241 }; 242 243 struct mpic_reg_bank { 244 u32 __iomem *base; 245 #ifdef CONFIG_PPC_DCR 246 dcr_host_t dhost; 247 #endif /* CONFIG_PPC_DCR */ 248 }; 249 250 struct mpic_irq_save { 251 u32 vecprio, 252 dest; 253 #ifdef CONFIG_MPIC_U3_HT_IRQS 254 u32 fixup_data; 255 #endif 256 }; 257 258 /* The instance data of a given MPIC */ 259 struct mpic 260 { 261 /* The OpenFirmware dt node for this MPIC */ 262 struct device_node *node; 263 264 /* The remapper for this MPIC */ 265 struct irq_domain *irqhost; 266 267 /* The "linux" controller struct */ 268 struct irq_chip hc_irq; 269 #ifdef CONFIG_MPIC_U3_HT_IRQS 270 struct irq_chip hc_ht_irq; 271 #endif 272 #ifdef CONFIG_SMP 273 struct irq_chip hc_ipi; 274 #endif 275 struct irq_chip hc_tm; 276 struct irq_chip hc_err; 277 const char *name; 278 /* Flags */ 279 unsigned int flags; 280 /* How many irq sources in a given ISU */ 281 unsigned int isu_size; 282 unsigned int isu_shift; 283 unsigned int isu_mask; 284 /* Number of sources */ 285 unsigned int num_sources; 286 287 /* vector numbers used for internal sources (ipi/timers) */ 288 unsigned int ipi_vecs[4]; 289 unsigned int timer_vecs[8]; 290 /* vector numbers used for FSL MPIC error interrupts */ 291 unsigned int err_int_vecs[MPIC_MAX_ERR]; 292 293 /* Spurious vector to program into unused sources */ 294 unsigned int spurious_vec; 295 296 #ifdef CONFIG_MPIC_U3_HT_IRQS 297 /* The fixup table */ 298 struct mpic_irq_fixup *fixups; 299 raw_spinlock_t fixup_lock; 300 #endif 301 302 /* Register access method */ 303 enum mpic_reg_type reg_type; 304 305 /* The physical base address of the MPIC */ 306 phys_addr_t paddr; 307 308 /* The various ioremap'ed bases */ 309 struct mpic_reg_bank thiscpuregs; 310 struct mpic_reg_bank gregs; 311 struct mpic_reg_bank tmregs; 312 struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; 313 struct mpic_reg_bank isus[MPIC_MAX_ISU]; 314 315 /* ioremap'ed base for error interrupt registers */ 316 u32 __iomem *err_regs; 317 318 /* Protected sources */ 319 unsigned long *protected; 320 321 #ifdef CONFIG_MPIC_WEIRD 322 /* Pointer to HW info array */ 323 u32 *hw_set; 324 #endif 325 326 #ifdef CONFIG_PCI_MSI 327 struct msi_bitmap msi_bitmap; 328 #endif 329 330 #ifdef CONFIG_MPIC_BROKEN_REGREAD 331 u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; 332 #endif 333 334 /* link */ 335 struct mpic *next; 336 337 #ifdef CONFIG_PM 338 struct mpic_irq_save *save_data; 339 #endif 340 }; 341 342 extern struct bus_type mpic_subsys; 343 344 /* 345 * MPIC flags (passed to mpic_alloc) 346 * 347 * The top 4 bits contain an MPIC bhw id that is used to index the 348 * register offsets and some masks when CONFIG_MPIC_WEIRD is set. 349 * Note setting any ID (leaving those bits to 0) means standard MPIC 350 */ 351 352 /* 353 * This is a secondary ("chained") controller; it only uses the CPU0 354 * registers. Primary controllers have IPIs and affinity control. 355 */ 356 #define MPIC_SECONDARY 0x00000001 357 358 /* Set this for a big-endian MPIC */ 359 #define MPIC_BIG_ENDIAN 0x00000002 360 /* Broken U3 MPIC */ 361 #define MPIC_U3_HT_IRQS 0x00000004 362 /* Broken IPI registers (autodetected) */ 363 #define MPIC_BROKEN_IPI 0x00000008 364 /* Spurious vector requires EOI */ 365 #define MPIC_SPV_EOI 0x00000020 366 /* No passthrough disable */ 367 #define MPIC_NO_PTHROU_DIS 0x00000040 368 /* DCR based MPIC */ 369 #define MPIC_USES_DCR 0x00000080 370 /* MPIC has 11-bit vector fields (or larger) */ 371 #define MPIC_LARGE_VECTORS 0x00000100 372 /* Enable delivery of prio 15 interrupts as MCK instead of EE */ 373 #define MPIC_ENABLE_MCK 0x00000200 374 /* Disable bias among target selection, spread interrupts evenly */ 375 #define MPIC_NO_BIAS 0x00000400 376 /* Destination only supports a single CPU at a time */ 377 #define MPIC_SINGLE_DEST_CPU 0x00001000 378 /* Enable CoreInt delivery of interrupts */ 379 #define MPIC_ENABLE_COREINT 0x00002000 380 /* Do not reset the MPIC during initialization */ 381 #define MPIC_NO_RESET 0x00004000 382 /* Freescale MPIC (compatible includes "fsl,mpic") */ 383 #define MPIC_FSL 0x00008000 384 /* Freescale MPIC supports EIMR (error interrupt mask register). 385 * This flag is set for MPIC version >= 4.1 (version determined 386 * from the BRR1 register). 387 */ 388 #define MPIC_FSL_HAS_EIMR 0x00010000 389 390 /* MPIC HW modification ID */ 391 #define MPIC_REGSET_MASK 0xf0000000 392 #define MPIC_REGSET(val) (((val) & 0xf ) << 28) 393 #define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf) 394 395 #define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */ 396 #define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */ 397 398 /* Get the version of primary MPIC */ 399 extern u32 fsl_mpic_primary_get_version(void); 400 401 /* Allocate the controller structure and setup the linux irq descs 402 * for the range if interrupts passed in. No HW initialization is 403 * actually performed. 404 * 405 * @phys_addr: physial base address of the MPIC 406 * @flags: flags, see constants above 407 * @isu_size: number of interrupts in an ISU. Use 0 to use a 408 * standard ISU-less setup (aka powermac) 409 * @irq_offset: first irq number to assign to this mpic 410 * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 411 * to match the number of sources 412 * @ipi_offset: first irq number to assign to this mpic IPI sources, 413 * used only on primary mpic 414 * @senses: array of sense values 415 * @senses_num: number of entries in the array 416 * 417 * Note about the sense array. If none is passed, all interrupts are 418 * setup to be level negative unless MPIC_U3_HT_IRQS is set in which 419 * case they are edge positive (and the array is ignored anyway). 420 * The values in the array start at the first source of the MPIC, 421 * that is senses[0] correspond to linux irq "irq_offset". 422 */ 423 extern struct mpic *mpic_alloc(struct device_node *node, 424 phys_addr_t phys_addr, 425 unsigned int flags, 426 unsigned int isu_size, 427 unsigned int irq_count, 428 const char *name); 429 430 /* Assign ISUs, to call before mpic_init() 431 * 432 * @mpic: controller structure as returned by mpic_alloc() 433 * @isu_num: ISU number 434 * @phys_addr: physical address of the ISU 435 */ 436 extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, 437 phys_addr_t phys_addr); 438 439 440 /* Initialize the controller. After this has been called, none of the above 441 * should be called again for this mpic 442 */ 443 extern void mpic_init(struct mpic *mpic); 444 445 /* 446 * All of the following functions must only be used after the 447 * ISUs have been assigned and the controller fully initialized 448 * with mpic_init() 449 */ 450 451 452 /* Change the priority of an interrupt. Default is 8 for irqs and 453 * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the 454 * IPI number is then the offset'ed (linux irq number mapped to the IPI) 455 */ 456 extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); 457 458 /* Setup a non-boot CPU */ 459 extern void mpic_setup_this_cpu(void); 460 461 /* Clean up for kexec (or cpu offline or ...) */ 462 extern void mpic_teardown_this_cpu(int secondary); 463 464 /* Get the current cpu priority for this cpu (0..15) */ 465 extern int mpic_cpu_get_priority(void); 466 467 /* Set the current cpu priority for this cpu */ 468 extern void mpic_cpu_set_priority(int prio); 469 470 /* Request IPIs on primary mpic */ 471 extern void mpic_request_ipis(void); 472 473 /* Send a message (IPI) to a given target (cpu number or MSG_*) */ 474 void smp_mpic_message_pass(int target, int msg); 475 476 /* Unmask a specific virq */ 477 extern void mpic_unmask_irq(struct irq_data *d); 478 /* Mask a specific virq */ 479 extern void mpic_mask_irq(struct irq_data *d); 480 /* EOI a specific virq */ 481 extern void mpic_end_irq(struct irq_data *d); 482 483 /* Fetch interrupt from a given mpic */ 484 extern unsigned int mpic_get_one_irq(struct mpic *mpic); 485 /* This one gets from the primary mpic */ 486 extern unsigned int mpic_get_irq(void); 487 /* This one gets from the primary mpic via CoreInt*/ 488 extern unsigned int mpic_get_coreint_irq(void); 489 /* Fetch Machine Check interrupt from primary mpic */ 490 extern unsigned int mpic_get_mcirq(void); 491 492 /* Set the EPIC clock ratio */ 493 void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio); 494 495 /* Enable/Disable EPIC serial interrupt mode */ 496 void mpic_set_serial_int(struct mpic *mpic, int enable); 497 498 #endif /* __KERNEL__ */ 499 #endif /* _ASM_POWERPC_MPIC_H */ 500