1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _ASM_POWERPC_HVCALL_H 3 #define _ASM_POWERPC_HVCALL_H 4 #ifdef __KERNEL__ 5 6 #define HVSC .long 0x44000022 7 8 #define H_SUCCESS 0 9 #define H_BUSY 1 /* Hardware busy -- retry later */ 10 #define H_CLOSED 2 /* Resource closed */ 11 #define H_NOT_AVAILABLE 3 12 #define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ 13 #define H_PARTIAL 5 14 #define H_IN_PROGRESS 14 /* Kind of like busy */ 15 #define H_PAGE_REGISTERED 15 16 #define H_PARTIAL_STORE 16 17 #define H_PENDING 17 /* returned from H_POLL_PENDING */ 18 #define H_CONTINUE 18 /* Returned from H_Join on success */ 19 #define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ 20 #define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ 21 is a good time to retry */ 22 #define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ 23 is a good time to retry */ 24 #define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ 25 is a good time to retry */ 26 #define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ 27 is a good time to retry */ 28 #define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ 29 is a good time to retry */ 30 #define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ 31 is a good time to retry */ 32 #define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ 33 34 /* Internal value used in book3s_hv kvm support; not returned to guests */ 35 #define H_TOO_HARD 9999 36 37 #define H_HARDWARE -1 /* Hardware error */ 38 #define H_FUNCTION -2 /* Function not supported */ 39 #define H_PRIVILEGE -3 /* Caller not privileged */ 40 #define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ 41 #define H_BAD_MODE -5 /* Illegal msr value */ 42 #define H_PTEG_FULL -6 /* PTEG is full */ 43 #define H_NOT_FOUND -7 /* PTE was not found" */ 44 #define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ 45 #define H_NO_MEM -9 46 #define H_AUTHORITY -10 47 #define H_PERMISSION -11 48 #define H_DROPPED -12 49 #define H_SOURCE_PARM -13 50 #define H_DEST_PARM -14 51 #define H_REMOTE_PARM -15 52 #define H_RESOURCE -16 53 #define H_ADAPTER_PARM -17 54 #define H_RH_PARM -18 55 #define H_RCQ_PARM -19 56 #define H_SCQ_PARM -20 57 #define H_EQ_PARM -21 58 #define H_RT_PARM -22 59 #define H_ST_PARM -23 60 #define H_SIGT_PARM -24 61 #define H_TOKEN_PARM -25 62 #define H_MLENGTH_PARM -27 63 #define H_MEM_PARM -28 64 #define H_MEM_ACCESS_PARM -29 65 #define H_ATTR_PARM -30 66 #define H_PORT_PARM -31 67 #define H_MCG_PARM -32 68 #define H_VL_PARM -33 69 #define H_TSIZE_PARM -34 70 #define H_TRACE_PARM -35 71 72 #define H_MASK_PARM -37 73 #define H_MCG_FULL -38 74 #define H_ALIAS_EXIST -39 75 #define H_P_COUNTER -40 76 #define H_TABLE_FULL -41 77 #define H_ALT_TABLE -42 78 #define H_MR_CONDITION -43 79 #define H_NOT_ENOUGH_RESOURCES -44 80 #define H_R_STATE -45 81 #define H_RESCINDED -46 82 #define H_P2 -55 83 #define H_P3 -56 84 #define H_P4 -57 85 #define H_P5 -58 86 #define H_P6 -59 87 #define H_P7 -60 88 #define H_P8 -61 89 #define H_P9 -62 90 #define H_TOO_BIG -64 91 #define H_UNSUPPORTED -67 92 #define H_OVERLAP -68 93 #define H_INTERRUPT -69 94 #define H_BAD_DATA -70 95 #define H_NOT_ACTIVE -71 96 #define H_SG_LIST -72 97 #define H_OP_MODE -73 98 #define H_COP_HW -74 99 #define H_STATE -75 100 #define H_UNSUPPORTED_FLAG_START -256 101 #define H_UNSUPPORTED_FLAG_END -511 102 #define H_MULTI_THREADS_ACTIVE -9005 103 #define H_OUTSTANDING_COP_OPS -9006 104 105 106 /* Long Busy is a condition that can be returned by the firmware 107 * when a call cannot be completed now, but the identical call 108 * should be retried later. This prevents calls blocking in the 109 * firmware for long periods of time. Annoyingly the firmware can return 110 * a range of return codes, hinting at how long we should wait before 111 * retrying. If you don't care for the hint, the macro below is a good 112 * way to check for the long_busy return codes 113 */ 114 #define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ 115 && (x <= H_LONG_BUSY_END_RANGE)) 116 117 /* Flags */ 118 #define H_LARGE_PAGE (1UL<<(63-16)) 119 #define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ 120 #define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ 121 #define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ 122 #define H_PAGE_STATE_CHANGE (1UL<<(63-28)) 123 #define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30))) 124 #define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED) 125 #define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31))) 126 #define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE 127 #define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ 128 #define H_ANDCOND (1UL<<(63-33)) 129 #define H_LOCAL (1UL<<(63-35)) 130 #define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ 131 #define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ 132 #define H_COALESCE_CAND (1UL<<(63-42)) /* page is a good candidate for coalescing */ 133 #define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ 134 #define H_COPY_PAGE (1UL<<(63-49)) 135 #define H_N (1UL<<(63-61)) 136 #define H_PP1 (1UL<<(63-62)) 137 #define H_PP2 (1UL<<(63-63)) 138 139 /* Flags for H_REGISTER_VPA subfunction field */ 140 #define H_VPA_FUNC_SHIFT (63-18) /* Bit posn of subfunction code */ 141 #define H_VPA_FUNC_MASK 7UL 142 #define H_VPA_REG_VPA 1UL /* Register Virtual Processor Area */ 143 #define H_VPA_REG_DTL 2UL /* Register Dispatch Trace Log */ 144 #define H_VPA_REG_SLB 3UL /* Register SLB shadow buffer */ 145 #define H_VPA_DEREG_VPA 5UL /* Deregister Virtual Processor Area */ 146 #define H_VPA_DEREG_DTL 6UL /* Deregister Dispatch Trace Log */ 147 #define H_VPA_DEREG_SLB 7UL /* Deregister SLB shadow buffer */ 148 149 /* VASI States */ 150 #define H_VASI_INVALID 0 151 #define H_VASI_ENABLED 1 152 #define H_VASI_ABORTED 2 153 #define H_VASI_SUSPENDING 3 154 #define H_VASI_SUSPENDED 4 155 #define H_VASI_RESUMED 5 156 #define H_VASI_COMPLETED 6 157 158 /* VASI signal codes. Only the Cancel code is valid for H_VASI_SIGNAL. */ 159 #define H_VASI_SIGNAL_CANCEL 1 160 #define H_VASI_SIGNAL_ABORT 2 161 #define H_VASI_SIGNAL_SUSPEND 3 162 #define H_VASI_SIGNAL_COMPLETE 4 163 #define H_VASI_SIGNAL_ENABLE 5 164 #define H_VASI_SIGNAL_FAILOVER 6 165 166 /* Each control block has to be on a 4K boundary */ 167 #define H_CB_ALIGNMENT 4096 168 169 /* pSeries hypervisor opcodes */ 170 #define H_REMOVE 0x04 171 #define H_ENTER 0x08 172 #define H_READ 0x0c 173 #define H_CLEAR_MOD 0x10 174 #define H_CLEAR_REF 0x14 175 #define H_PROTECT 0x18 176 #define H_GET_TCE 0x1c 177 #define H_PUT_TCE 0x20 178 #define H_SET_SPRG0 0x24 179 #define H_SET_DABR 0x28 180 #define H_PAGE_INIT 0x2c 181 #define H_SET_ASR 0x30 182 #define H_ASR_ON 0x34 183 #define H_ASR_OFF 0x38 184 #define H_LOGICAL_CI_LOAD 0x3c 185 #define H_LOGICAL_CI_STORE 0x40 186 #define H_LOGICAL_CACHE_LOAD 0x44 187 #define H_LOGICAL_CACHE_STORE 0x48 188 #define H_LOGICAL_ICBI 0x4c 189 #define H_LOGICAL_DCBF 0x50 190 #define H_GET_TERM_CHAR 0x54 191 #define H_PUT_TERM_CHAR 0x58 192 #define H_REAL_TO_LOGICAL 0x5c 193 #define H_HYPERVISOR_DATA 0x60 194 #define H_EOI 0x64 195 #define H_CPPR 0x68 196 #define H_IPI 0x6c 197 #define H_IPOLL 0x70 198 #define H_XIRR 0x74 199 #define H_PERFMON 0x7c 200 #define H_MIGRATE_DMA 0x78 201 #define H_REGISTER_VPA 0xDC 202 #define H_CEDE 0xE0 203 #define H_CONFER 0xE4 204 #define H_PROD 0xE8 205 #define H_GET_PPP 0xEC 206 #define H_SET_PPP 0xF0 207 #define H_PURR 0xF4 208 #define H_PIC 0xF8 209 #define H_REG_CRQ 0xFC 210 #define H_FREE_CRQ 0x100 211 #define H_VIO_SIGNAL 0x104 212 #define H_SEND_CRQ 0x108 213 #define H_COPY_RDMA 0x110 214 #define H_REGISTER_LOGICAL_LAN 0x114 215 #define H_FREE_LOGICAL_LAN 0x118 216 #define H_ADD_LOGICAL_LAN_BUFFER 0x11C 217 #define H_SEND_LOGICAL_LAN 0x120 218 #define H_BULK_REMOVE 0x124 219 #define H_MULTICAST_CTRL 0x130 220 #define H_SET_XDABR 0x134 221 #define H_STUFF_TCE 0x138 222 #define H_PUT_TCE_INDIRECT 0x13C 223 #define H_CHANGE_LOGICAL_LAN_MAC 0x14C 224 #define H_VTERM_PARTNER_INFO 0x150 225 #define H_REGISTER_VTERM 0x154 226 #define H_FREE_VTERM 0x158 227 #define H_RESET_EVENTS 0x15C 228 #define H_ALLOC_RESOURCE 0x160 229 #define H_FREE_RESOURCE 0x164 230 #define H_MODIFY_QP 0x168 231 #define H_QUERY_QP 0x16C 232 #define H_REREGISTER_PMR 0x170 233 #define H_REGISTER_SMR 0x174 234 #define H_QUERY_MR 0x178 235 #define H_QUERY_MW 0x17C 236 #define H_QUERY_HCA 0x180 237 #define H_QUERY_PORT 0x184 238 #define H_MODIFY_PORT 0x188 239 #define H_DEFINE_AQP1 0x18C 240 #define H_GET_TRACE_BUFFER 0x190 241 #define H_DEFINE_AQP0 0x194 242 #define H_RESIZE_MR 0x198 243 #define H_ATTACH_MCQP 0x19C 244 #define H_DETACH_MCQP 0x1A0 245 #define H_CREATE_RPT 0x1A4 246 #define H_REMOVE_RPT 0x1A8 247 #define H_REGISTER_RPAGES 0x1AC 248 #define H_DISABLE_AND_GET 0x1B0 249 #define H_ERROR_DATA 0x1B4 250 #define H_GET_HCA_INFO 0x1B8 251 #define H_GET_PERF_COUNT 0x1BC 252 #define H_MANAGE_TRACE 0x1C0 253 #define H_GET_CPU_CHARACTERISTICS 0x1C8 254 #define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 255 #define H_QUERY_INT_STATE 0x1E4 256 #define H_POLL_PENDING 0x1D8 257 #define H_ILLAN_ATTRIBUTES 0x244 258 #define H_MODIFY_HEA_QP 0x250 259 #define H_QUERY_HEA_QP 0x254 260 #define H_QUERY_HEA 0x258 261 #define H_QUERY_HEA_PORT 0x25C 262 #define H_MODIFY_HEA_PORT 0x260 263 #define H_REG_BCMC 0x264 264 #define H_DEREG_BCMC 0x268 265 #define H_REGISTER_HEA_RPAGES 0x26C 266 #define H_DISABLE_AND_GET_HEA 0x270 267 #define H_GET_HEA_INFO 0x274 268 #define H_ALLOC_HEA_RESOURCE 0x278 269 #define H_ADD_CONN 0x284 270 #define H_DEL_CONN 0x288 271 #define H_JOIN 0x298 272 #define H_VASI_SIGNAL 0x2A0 273 #define H_VASI_STATE 0x2A4 274 #define H_VIOCTL 0x2A8 275 #define H_ENABLE_CRQ 0x2B0 276 #define H_GET_EM_PARMS 0x2B8 277 #define H_SET_MPP 0x2D0 278 #define H_GET_MPP 0x2D4 279 #define H_REG_SUB_CRQ 0x2DC 280 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC 281 #define H_FREE_SUB_CRQ 0x2E0 282 #define H_SEND_SUB_CRQ 0x2E4 283 #define H_SEND_SUB_CRQ_INDIRECT 0x2E8 284 #define H_BEST_ENERGY 0x2F4 285 #define H_XIRR_X 0x2FC 286 #define H_RANDOM 0x300 287 #define H_COP 0x304 288 #define H_GET_MPP_X 0x314 289 #define H_SET_MODE 0x31C 290 #define H_BLOCK_REMOVE 0x328 291 #define H_CLEAR_HPT 0x358 292 #define H_REQUEST_VMC 0x360 293 #define H_RESIZE_HPT_PREPARE 0x36C 294 #define H_RESIZE_HPT_COMMIT 0x370 295 #define H_REGISTER_PROC_TBL 0x37C 296 #define H_SIGNAL_SYS_RESET 0x380 297 #define H_INT_GET_SOURCE_INFO 0x3A8 298 #define H_INT_SET_SOURCE_CONFIG 0x3AC 299 #define H_INT_GET_SOURCE_CONFIG 0x3B0 300 #define H_INT_GET_QUEUE_INFO 0x3B4 301 #define H_INT_SET_QUEUE_CONFIG 0x3B8 302 #define H_INT_GET_QUEUE_CONFIG 0x3BC 303 #define H_INT_SET_OS_REPORTING_LINE 0x3C0 304 #define H_INT_GET_OS_REPORTING_LINE 0x3C4 305 #define H_INT_ESB 0x3C8 306 #define H_INT_SYNC 0x3CC 307 #define H_INT_RESET 0x3D0 308 #define H_SCM_READ_METADATA 0x3E4 309 #define H_SCM_WRITE_METADATA 0x3E8 310 #define H_SCM_BIND_MEM 0x3EC 311 #define H_SCM_UNBIND_MEM 0x3F0 312 #define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4 313 #define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8 314 #define H_SCM_UNBIND_ALL 0x3FC 315 #define H_SCM_HEALTH 0x400 316 #define H_SCM_PERFORMANCE_STATS 0x418 317 #define H_RPT_INVALIDATE 0x448 318 #define H_SCM_FLUSH 0x44C 319 #define MAX_HCALL_OPCODE H_SCM_FLUSH 320 321 /* Scope args for H_SCM_UNBIND_ALL */ 322 #define H_UNBIND_SCOPE_ALL (0x1) 323 #define H_UNBIND_SCOPE_DRC (0x2) 324 325 /* H_VIOCTL functions */ 326 #define H_GET_VIOA_DUMP_SIZE 0x01 327 #define H_GET_VIOA_DUMP 0x02 328 #define H_GET_ILLAN_NUM_VLAN_IDS 0x03 329 #define H_GET_ILLAN_VLAN_ID_LIST 0x04 330 #define H_GET_ILLAN_SWITCH_ID 0x05 331 #define H_DISABLE_MIGRATION 0x06 332 #define H_ENABLE_MIGRATION 0x07 333 #define H_GET_PARTNER_INFO 0x08 334 #define H_GET_PARTNER_WWPN_LIST 0x09 335 #define H_DISABLE_ALL_VIO_INTS 0x0A 336 #define H_DISABLE_VIO_INTERRUPT 0x0B 337 #define H_ENABLE_VIO_INTERRUPT 0x0C 338 #define H_GET_SESSION_TOKEN 0x19 339 #define H_SESSION_ERR_DETECTED 0x1A 340 341 342 /* Platform specific hcalls, used by KVM */ 343 #define H_RTAS 0xf000 344 345 /* "Platform specific hcalls", provided by PHYP */ 346 #define H_GET_24X7_CATALOG_PAGE 0xF078 347 #define H_GET_24X7_DATA 0xF07C 348 #define H_GET_PERF_COUNTER_INFO 0xF080 349 350 /* Platform-specific hcalls used for nested HV KVM */ 351 #define H_SET_PARTITION_TABLE 0xF800 352 #define H_ENTER_NESTED 0xF804 353 #define H_TLB_INVALIDATE 0xF808 354 #define H_COPY_TOFROM_GUEST 0xF80C 355 356 /* Flags for H_SVM_PAGE_IN */ 357 #define H_PAGE_IN_SHARED 0x1 358 359 /* Platform-specific hcalls used by the Ultravisor */ 360 #define H_SVM_PAGE_IN 0xEF00 361 #define H_SVM_PAGE_OUT 0xEF04 362 #define H_SVM_INIT_START 0xEF08 363 #define H_SVM_INIT_DONE 0xEF0C 364 #define H_SVM_INIT_ABORT 0xEF14 365 366 /* Values for 2nd argument to H_SET_MODE */ 367 #define H_SET_MODE_RESOURCE_SET_CIABR 1 368 #define H_SET_MODE_RESOURCE_SET_DAWR0 2 369 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3 370 #define H_SET_MODE_RESOURCE_LE 4 371 #define H_SET_MODE_RESOURCE_SET_DAWR1 5 372 373 /* Values for argument to H_SIGNAL_SYS_RESET */ 374 #define H_SIGNAL_SYS_RESET_ALL -1 375 #define H_SIGNAL_SYS_RESET_ALL_OTHERS -2 376 /* >= 0 values are CPU number */ 377 378 /* H_GET_CPU_CHARACTERISTICS return values */ 379 #define H_CPU_CHAR_SPEC_BAR_ORI31 (1ull << 63) // IBM bit 0 380 #define H_CPU_CHAR_BCCTRL_SERIALISED (1ull << 62) // IBM bit 1 381 #define H_CPU_CHAR_L1D_FLUSH_ORI30 (1ull << 61) // IBM bit 2 382 #define H_CPU_CHAR_L1D_FLUSH_TRIG2 (1ull << 60) // IBM bit 3 383 #define H_CPU_CHAR_L1D_THREAD_PRIV (1ull << 59) // IBM bit 4 384 #define H_CPU_CHAR_BRANCH_HINTS_HONORED (1ull << 58) // IBM bit 5 385 #define H_CPU_CHAR_THREAD_RECONFIG_CTRL (1ull << 57) // IBM bit 6 386 #define H_CPU_CHAR_COUNT_CACHE_DISABLED (1ull << 56) // IBM bit 7 387 #define H_CPU_CHAR_BCCTR_FLUSH_ASSIST (1ull << 54) // IBM bit 9 388 #define H_CPU_CHAR_BCCTR_LINK_FLUSH_ASSIST (1ull << 52) // IBM bit 11 389 390 #define H_CPU_BEHAV_FAVOUR_SECURITY (1ull << 63) // IBM bit 0 391 #define H_CPU_BEHAV_L1D_FLUSH_PR (1ull << 62) // IBM bit 1 392 #define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR (1ull << 61) // IBM bit 2 393 #define H_CPU_BEHAV_FAVOUR_SECURITY_H (1ull << 60) // IBM bit 3 394 #define H_CPU_BEHAV_FLUSH_COUNT_CACHE (1ull << 58) // IBM bit 5 395 #define H_CPU_BEHAV_FLUSH_LINK_STACK (1ull << 57) // IBM bit 6 396 397 /* Flag values used in H_REGISTER_PROC_TBL hcall */ 398 #define PROC_TABLE_OP_MASK 0x18 399 #define PROC_TABLE_DEREG 0x10 400 #define PROC_TABLE_NEW 0x18 401 #define PROC_TABLE_TYPE_MASK 0x06 402 #define PROC_TABLE_HPT_SLB 0x00 403 #define PROC_TABLE_HPT_PT 0x02 404 #define PROC_TABLE_RADIX 0x04 405 #define PROC_TABLE_GTSE 0x01 406 407 /* 408 * Defines for 409 * H_RPT_INVALIDATE - Invalidate RPT translation lookaside information. 410 */ 411 412 /* Type of translation to invalidate (type) */ 413 #define H_RPTI_TYPE_NESTED 0x0001 /* Invalidate nested guest partition-scope */ 414 #define H_RPTI_TYPE_TLB 0x0002 /* Invalidate TLB */ 415 #define H_RPTI_TYPE_PWC 0x0004 /* Invalidate Page Walk Cache */ 416 /* Invalidate Process Table Entries if H_RPTI_TYPE_NESTED is clear */ 417 #define H_RPTI_TYPE_PRT 0x0008 418 /* Invalidate Partition Table Entries if H_RPTI_TYPE_NESTED is set */ 419 #define H_RPTI_TYPE_PAT 0x0008 420 #define H_RPTI_TYPE_ALL (H_RPTI_TYPE_TLB | H_RPTI_TYPE_PWC | \ 421 H_RPTI_TYPE_PRT) 422 #define H_RPTI_TYPE_NESTED_ALL (H_RPTI_TYPE_TLB | H_RPTI_TYPE_PWC | \ 423 H_RPTI_TYPE_PAT) 424 425 /* Invalidation targets (target) */ 426 #define H_RPTI_TARGET_CMMU 0x01 /* All virtual processors in the partition */ 427 #define H_RPTI_TARGET_CMMU_LOCAL 0x02 /* Current virtual processor */ 428 /* All nest/accelerator agents in use by the partition */ 429 #define H_RPTI_TARGET_NMMU 0x04 430 431 /* Page size mask (page sizes) */ 432 #define H_RPTI_PAGE_4K 0x01 433 #define H_RPTI_PAGE_64K 0x02 434 #define H_RPTI_PAGE_2M 0x04 435 #define H_RPTI_PAGE_1G 0x08 436 #define H_RPTI_PAGE_ALL (-1UL) 437 438 #ifndef __ASSEMBLY__ 439 #include <linux/types.h> 440 441 /** 442 * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments 443 * @opcode: The hypervisor call to make. 444 * 445 * This call supports up to 7 arguments and only returns the status of 446 * the hcall. Use this version where possible, its slightly faster than 447 * the other plpar_hcalls. 448 */ 449 long plpar_hcall_norets(unsigned long opcode, ...); 450 451 /** 452 * plpar_hcall: - Make a pseries hypervisor call 453 * @opcode: The hypervisor call to make. 454 * @retbuf: Buffer to store up to 4 return arguments in. 455 * 456 * This call supports up to 6 arguments and 4 return arguments. Use 457 * PLPAR_HCALL_BUFSIZE to size the return argument buffer. 458 * 459 * Used for all but the craziest of phyp interfaces (see plpar_hcall9) 460 */ 461 #define PLPAR_HCALL_BUFSIZE 4 462 long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...); 463 464 /** 465 * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats 466 * @opcode: The hypervisor call to make. 467 * @retbuf: Buffer to store up to 4 return arguments in. 468 * 469 * This call supports up to 6 arguments and 4 return arguments. Use 470 * PLPAR_HCALL_BUFSIZE to size the return argument buffer. 471 * 472 * Used when phyp interface needs to be called in real mode. Similar to 473 * plpar_hcall, but plpar_hcall_raw works in real mode and does not 474 * calculate hypervisor call statistics. 475 */ 476 long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...); 477 478 /** 479 * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments 480 * @opcode: The hypervisor call to make. 481 * @retbuf: Buffer to store up to 9 return arguments in. 482 * 483 * This call supports up to 9 arguments and 9 return arguments. Use 484 * PLPAR_HCALL9_BUFSIZE to size the return argument buffer. 485 */ 486 #define PLPAR_HCALL9_BUFSIZE 9 487 long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...); 488 long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...); 489 490 struct hvcall_mpp_data { 491 unsigned long entitled_mem; 492 unsigned long mapped_mem; 493 unsigned short group_num; 494 unsigned short pool_num; 495 unsigned char mem_weight; 496 unsigned char unallocated_mem_weight; 497 unsigned long unallocated_entitlement; /* value in bytes */ 498 unsigned long pool_size; 499 signed long loan_request; 500 unsigned long backing_mem; 501 }; 502 503 int h_get_mpp(struct hvcall_mpp_data *); 504 505 struct hvcall_mpp_x_data { 506 unsigned long coalesced_bytes; 507 unsigned long pool_coalesced_bytes; 508 unsigned long pool_purr_cycles; 509 unsigned long pool_spurr_cycles; 510 unsigned long reserved[3]; 511 }; 512 513 int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data); 514 515 static inline unsigned int get_longbusy_msecs(int longbusy_rc) 516 { 517 switch (longbusy_rc) { 518 case H_LONG_BUSY_ORDER_1_MSEC: 519 return 1; 520 case H_LONG_BUSY_ORDER_10_MSEC: 521 return 10; 522 case H_LONG_BUSY_ORDER_100_MSEC: 523 return 100; 524 case H_LONG_BUSY_ORDER_1_SEC: 525 return 1000; 526 case H_LONG_BUSY_ORDER_10_SEC: 527 return 10000; 528 case H_LONG_BUSY_ORDER_100_SEC: 529 return 100000; 530 default: 531 return 1; 532 } 533 } 534 535 struct h_cpu_char_result { 536 u64 character; 537 u64 behaviour; 538 }; 539 540 /* 541 * Register state for entering a nested guest with H_ENTER_NESTED. 542 * New member must be added at the end. 543 */ 544 struct hv_guest_state { 545 u64 version; /* version of this structure layout, must be first */ 546 u32 lpid; 547 u32 vcpu_token; 548 /* These registers are hypervisor privileged (at least for writing) */ 549 u64 lpcr; 550 u64 pcr; 551 u64 amor; 552 u64 dpdes; 553 u64 hfscr; 554 s64 tb_offset; 555 u64 dawr0; 556 u64 dawrx0; 557 u64 ciabr; 558 u64 hdec_expiry; 559 u64 purr; 560 u64 spurr; 561 u64 ic; 562 u64 vtb; 563 u64 hdar; 564 u64 hdsisr; 565 u64 heir; 566 u64 asdr; 567 /* These are OS privileged but need to be set late in guest entry */ 568 u64 srr0; 569 u64 srr1; 570 u64 sprg[4]; 571 u64 pidr; 572 u64 cfar; 573 u64 ppr; 574 /* Version 1 ends here */ 575 u64 dawr1; 576 u64 dawrx1; 577 /* Version 2 ends here */ 578 }; 579 580 /* Latest version of hv_guest_state structure */ 581 #define HV_GUEST_STATE_VERSION 2 582 583 static inline int hv_guest_state_size(unsigned int version) 584 { 585 switch (version) { 586 case 1: 587 return offsetofend(struct hv_guest_state, ppr); 588 case 2: 589 return offsetofend(struct hv_guest_state, dawrx1); 590 default: 591 return -1; 592 } 593 } 594 595 /* 596 * From the document "H_GetPerformanceCounterInfo Interface" v1.07 597 * 598 * H_GET_PERF_COUNTER_INFO argument 599 */ 600 struct hv_get_perf_counter_info_params { 601 __be32 counter_request; /* I */ 602 __be32 starting_index; /* IO */ 603 __be16 secondary_index; /* IO */ 604 __be16 returned_values; /* O */ 605 __be32 detail_rc; /* O, only needed when called via *_norets() */ 606 607 /* 608 * O, size each of counter_value element in bytes, only set for version 609 * >= 0x3 610 */ 611 __be16 cv_element_size; 612 613 /* I, 0 (zero) for versions < 0x3 */ 614 __u8 counter_info_version_in; 615 616 /* O, 0 (zero) if version < 0x3. Must be set to 0 when making hcall */ 617 __u8 counter_info_version_out; 618 __u8 reserved[0xC]; 619 __u8 counter_value[]; 620 } __packed; 621 622 #define HGPCI_REQ_BUFFER_SIZE 4096 623 #define HGPCI_MAX_DATA_BYTES \ 624 (HGPCI_REQ_BUFFER_SIZE - sizeof(struct hv_get_perf_counter_info_params)) 625 626 struct hv_gpci_request_buffer { 627 struct hv_get_perf_counter_info_params params; 628 uint8_t bytes[HGPCI_MAX_DATA_BYTES]; 629 } __packed; 630 631 #endif /* __ASSEMBLY__ */ 632 #endif /* __KERNEL__ */ 633 #endif /* _ASM_POWERPC_HVCALL_H */ 634