1 /*
2  *  Definitions for use by exception code on Book3-E
3  *
4  *  Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
5  *
6  *  This program is free software; you can redistribute it and/or
7  *  modify it under the terms of the GNU General Public License
8  *  as published by the Free Software Foundation; either version
9  *  2 of the License, or (at your option) any later version.
10  */
11 #ifndef _ASM_POWERPC_EXCEPTION_64E_H
12 #define _ASM_POWERPC_EXCEPTION_64E_H
13 
14 /*
15  * SPRGs usage an other considerations...
16  *
17  * Since TLB miss and other standard exceptions can be interrupted by
18  * critical exceptions which can themselves be interrupted by machine
19  * checks, and since the two later can themselves cause a TLB miss when
20  * hitting the linear mapping for the kernel stacks, we need to be a bit
21  * creative on how we use SPRGs.
22  *
23  * The base idea is that we have one SRPG reserved for critical and one
24  * for machine check interrupts. Those are used to save a GPR that can
25  * then be used to get the PACA, and store as much context as we need
26  * to save in there. That includes saving the SPRGs used by the TLB miss
27  * handler for linear mapping misses and the associated SRR0/1 due to
28  * the above re-entrancy issue.
29  *
30  * So here's the current usage pattern. It's done regardless of which
31  * SPRGs are user-readable though, thus we might have to change some of
32  * this later. In order to do that more easily, we use special constants
33  * for naming them
34  *
35  * WARNING: Some of these SPRGs are user readable. We need to do something
36  * about it as some point by making sure they can't be used to leak kernel
37  * critical data
38  */
39 
40 #define PACA_EXGDBELL PACA_EXGEN
41 
42 /* We are out of SPRGs so we save some things in the PACA. The normal
43  * exception frame is smaller than the CRIT or MC one though
44  */
45 #define EX_R1		(0 * 8)
46 #define EX_CR		(1 * 8)
47 #define EX_R10		(2 * 8)
48 #define EX_R11		(3 * 8)
49 #define EX_R14		(4 * 8)
50 #define EX_R15		(5 * 8)
51 
52 /*
53  * The TLB miss exception uses different slots.
54  *
55  * The bolted variant uses only the first six fields,
56  * which in combination with pgd and kernel_pgd fits in
57  * one 64-byte cache line.
58  */
59 
60 #define EX_TLB_R10	( 0 * 8)
61 #define EX_TLB_R11	( 1 * 8)
62 #define EX_TLB_R14	( 2 * 8)
63 #define EX_TLB_R15	( 3 * 8)
64 #define EX_TLB_R16	( 4 * 8)
65 #define EX_TLB_CR	( 5 * 8)
66 #define EX_TLB_R12	( 6 * 8)
67 #define EX_TLB_R13	( 7 * 8)
68 #define EX_TLB_DEAR	( 8 * 8) /* Level 0 and 2 only */
69 #define EX_TLB_ESR	( 9 * 8) /* Level 0 and 2 only */
70 #define EX_TLB_SRR0	(10 * 8)
71 #define EX_TLB_SRR1	(11 * 8)
72 #define EX_TLB_R7	(12 * 8)
73 #ifdef CONFIG_BOOK3E_MMU_TLB_STATS
74 #define EX_TLB_R8	(13 * 8)
75 #define EX_TLB_R9	(14 * 8)
76 #define EX_TLB_LR	(15 * 8)
77 #define EX_TLB_SIZE	(16 * 8)
78 #else
79 #define EX_TLB_SIZE	(13 * 8)
80 #endif
81 
82 #define	START_EXCEPTION(label)						\
83 	.globl exc_##label##_book3e;					\
84 exc_##label##_book3e:
85 
86 /* TLB miss exception prolog
87  *
88  * This prolog handles re-entrancy (up to 3 levels supported in the PACA
89  * though we currently don't test for overflow). It provides you with a
90  * re-entrancy safe working space of r10...r16 and CR with r12 being used
91  * as the exception area pointer in the PACA for that level of re-entrancy
92  * and r13 containing the PACA pointer.
93  *
94  * SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply
95  * as-is for instruction exceptions. It's up to the actual exception code
96  * to save them as well if required.
97  */
98 #define TLB_MISS_PROLOG							    \
99 	mtspr	SPRN_SPRG_TLB_SCRATCH,r12;				    \
100 	mfspr	r12,SPRN_SPRG_TLB_EXFRAME;				    \
101 	std	r10,EX_TLB_R10(r12);					    \
102 	mfcr	r10;							    \
103 	std	r11,EX_TLB_R11(r12);					    \
104 	mfspr	r11,SPRN_SPRG_TLB_SCRATCH;				    \
105 	std	r13,EX_TLB_R13(r12);					    \
106 	mfspr	r13,SPRN_SPRG_PACA;					    \
107 	std	r14,EX_TLB_R14(r12);					    \
108 	addi	r14,r12,EX_TLB_SIZE;					    \
109 	std	r15,EX_TLB_R15(r12);					    \
110 	mfspr	r15,SPRN_SRR1;						    \
111 	std	r16,EX_TLB_R16(r12);					    \
112 	mfspr	r16,SPRN_SRR0;						    \
113 	std	r10,EX_TLB_CR(r12);					    \
114 	std	r11,EX_TLB_R12(r12);					    \
115 	mtspr	SPRN_SPRG_TLB_EXFRAME,r14;				    \
116 	std	r15,EX_TLB_SRR1(r12);					    \
117 	std	r16,EX_TLB_SRR0(r12);					    \
118 	TLB_MISS_PROLOG_STATS
119 
120 /* And these are the matching epilogs that restores things
121  *
122  * There are 3 epilogs:
123  *
124  * - SUCCESS       : Unwinds one level
125  * - ERROR         : restore from level 0 and reset
126  * - ERROR_SPECIAL : restore from current level and reset
127  *
128  * Normal errors use ERROR, that is, they restore the initial fault context
129  * and trigger a fault. However, there is a special case for linear mapping
130  * errors. Those should basically never happen, but if they do happen, we
131  * want the error to point out the context that did that linear mapping
132  * fault, not the initial level 0 (basically, we got a bogus PGF or something
133  * like that). For userland errors on the linear mapping, there is no
134  * difference since those are always level 0 anyway
135  */
136 
137 #define TLB_MISS_RESTORE(freg)						    \
138 	ld	r14,EX_TLB_CR(r12);					    \
139 	ld	r10,EX_TLB_R10(r12);					    \
140 	ld	r15,EX_TLB_SRR0(r12);					    \
141 	ld	r16,EX_TLB_SRR1(r12);					    \
142 	mtspr	SPRN_SPRG_TLB_EXFRAME,freg;				    \
143 	ld	r11,EX_TLB_R11(r12);					    \
144 	mtcr	r14;							    \
145 	ld	r13,EX_TLB_R13(r12);					    \
146 	ld	r14,EX_TLB_R14(r12);					    \
147 	mtspr	SPRN_SRR0,r15;						    \
148 	ld	r15,EX_TLB_R15(r12);					    \
149 	mtspr	SPRN_SRR1,r16;						    \
150 	TLB_MISS_RESTORE_STATS						    \
151 	ld	r16,EX_TLB_R16(r12);					    \
152 	ld	r12,EX_TLB_R12(r12);					    \
153 
154 #define TLB_MISS_EPILOG_SUCCESS						    \
155 	TLB_MISS_RESTORE(r12)
156 
157 #define TLB_MISS_EPILOG_ERROR						    \
158 	addi	r12,r13,PACA_EXTLB;					    \
159 	TLB_MISS_RESTORE(r12)
160 
161 #define TLB_MISS_EPILOG_ERROR_SPECIAL					    \
162 	addi	r11,r13,PACA_EXTLB;					    \
163 	TLB_MISS_RESTORE(r11)
164 
165 #ifdef CONFIG_BOOK3E_MMU_TLB_STATS
166 #define TLB_MISS_PROLOG_STATS						    \
167 	mflr	r10;							    \
168 	std	r8,EX_TLB_R8(r12);					    \
169 	std	r9,EX_TLB_R9(r12);					    \
170 	std	r10,EX_TLB_LR(r12);
171 #define TLB_MISS_RESTORE_STATS					            \
172 	ld	r16,EX_TLB_LR(r12);					    \
173 	ld	r9,EX_TLB_R9(r12);					    \
174 	ld	r8,EX_TLB_R8(r12);					    \
175 	mtlr	r16;
176 #define TLB_MISS_STATS_D(name)						    \
177 	addi	r9,r13,MMSTAT_DSTATS+name;				    \
178 	bl	tlb_stat_inc;
179 #define TLB_MISS_STATS_I(name)						    \
180 	addi	r9,r13,MMSTAT_ISTATS+name;				    \
181 	bl	tlb_stat_inc;
182 #define TLB_MISS_STATS_X(name)						    \
183 	ld	r8,PACA_EXTLB+EX_TLB_ESR(r13);				    \
184 	cmpdi	cr2,r8,-1;						    \
185 	beq	cr2,61f;						    \
186 	addi	r9,r13,MMSTAT_DSTATS+name;				    \
187 	b	62f;							    \
188 61:	addi	r9,r13,MMSTAT_ISTATS+name;				    \
189 62:	bl	tlb_stat_inc;
190 #define TLB_MISS_STATS_SAVE_INFO					    \
191 	std	r14,EX_TLB_ESR(r12);	/* save ESR */
192 #define TLB_MISS_STATS_SAVE_INFO_BOLTED					    \
193 	std	r14,PACA_EXTLB+EX_TLB_ESR(r13);	/* save ESR */
194 #else
195 #define TLB_MISS_PROLOG_STATS
196 #define TLB_MISS_RESTORE_STATS
197 #define TLB_MISS_PROLOG_STATS_BOLTED
198 #define TLB_MISS_RESTORE_STATS_BOLTED
199 #define TLB_MISS_STATS_D(name)
200 #define TLB_MISS_STATS_I(name)
201 #define TLB_MISS_STATS_X(name)
202 #define TLB_MISS_STATS_Y(name)
203 #define TLB_MISS_STATS_SAVE_INFO
204 #define TLB_MISS_STATS_SAVE_INFO_BOLTED
205 #endif
206 
207 #define SET_IVOR(vector_number, vector_offset)	\
208 	LOAD_REG_ADDR(r3,interrupt_base_book3e);\
209 	ori	r3,r3,vector_offset@l;		\
210 	mtspr	SPRN_IVOR##vector_number,r3;
211 
212 #define RFI_TO_KERNEL							\
213 	rfi
214 
215 #define RFI_TO_USER							\
216 	rfi
217 
218 #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
219 
220