1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  */
4 #ifndef _ASM_POWERPC_CACHEFLUSH_H
5 #define _ASM_POWERPC_CACHEFLUSH_H
6 
7 #ifdef __KERNEL__
8 
9 #include <linux/mm.h>
10 #include <asm/cputable.h>
11 
12 /*
13  * No cache flushing is required when address mappings are changed,
14  * because the caches on PowerPCs are physically addressed.
15  */
16 #define flush_cache_all()			do { } while (0)
17 #define flush_cache_mm(mm)			do { } while (0)
18 #define flush_cache_dup_mm(mm)			do { } while (0)
19 #define flush_cache_range(vma, start, end)	do { } while (0)
20 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
21 #define flush_icache_page(vma, page)		do { } while (0)
22 #define flush_cache_vunmap(start, end)		do { } while (0)
23 
24 #ifdef CONFIG_PPC_BOOK3S_64
25 /*
26  * Book3s has no ptesync after setting a pte, so without this ptesync it's
27  * possible for a kernel virtual mapping access to return a spurious fault
28  * if it's accessed right after the pte is set. The page fault handler does
29  * not expect this type of fault. flush_cache_vmap is not exactly the right
30  * place to put this, but it seems to work well enough.
31  */
32 static inline void flush_cache_vmap(unsigned long start, unsigned long end)
33 {
34 	asm volatile("ptesync" ::: "memory");
35 }
36 #else
37 static inline void flush_cache_vmap(unsigned long start, unsigned long end) { }
38 #endif
39 
40 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
41 extern void flush_dcache_page(struct page *page);
42 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
43 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
44 
45 void flush_icache_range(unsigned long start, unsigned long stop);
46 extern void flush_icache_user_range(struct vm_area_struct *vma,
47 				    struct page *page, unsigned long addr,
48 				    int len);
49 extern void flush_dcache_icache_page(struct page *page);
50 void __flush_dcache_icache(void *page);
51 
52 /**
53  * flush_dcache_range(): Write any modified data cache blocks out to memory and
54  * invalidate them. Does not invalidate the corresponding instruction cache
55  * blocks.
56  *
57  * @start: the start address
58  * @stop: the stop address (exclusive)
59  */
60 static inline void flush_dcache_range(unsigned long start, unsigned long stop)
61 {
62 	unsigned long shift = l1_dcache_shift();
63 	unsigned long bytes = l1_dcache_bytes();
64 	void *addr = (void *)(start & ~(bytes - 1));
65 	unsigned long size = stop - (unsigned long)addr + (bytes - 1);
66 	unsigned long i;
67 
68 	if (IS_ENABLED(CONFIG_PPC64))
69 		mb();	/* sync */
70 
71 	for (i = 0; i < size >> shift; i++, addr += bytes)
72 		dcbf(addr);
73 	mb();	/* sync */
74 
75 }
76 
77 /*
78  * Write any modified data cache blocks out to memory.
79  * Does not invalidate the corresponding cache lines (especially for
80  * any corresponding instruction cache).
81  */
82 static inline void clean_dcache_range(unsigned long start, unsigned long stop)
83 {
84 	unsigned long shift = l1_dcache_shift();
85 	unsigned long bytes = l1_dcache_bytes();
86 	void *addr = (void *)(start & ~(bytes - 1));
87 	unsigned long size = stop - (unsigned long)addr + (bytes - 1);
88 	unsigned long i;
89 
90 	for (i = 0; i < size >> shift; i++, addr += bytes)
91 		dcbst(addr);
92 	mb();	/* sync */
93 }
94 
95 /*
96  * Like above, but invalidate the D-cache.  This is used by the 8xx
97  * to invalidate the cache so the PPC core doesn't get stale data
98  * from the CPM (no cache snooping here :-).
99  */
100 static inline void invalidate_dcache_range(unsigned long start,
101 					   unsigned long stop)
102 {
103 	unsigned long shift = l1_dcache_shift();
104 	unsigned long bytes = l1_dcache_bytes();
105 	void *addr = (void *)(start & ~(bytes - 1));
106 	unsigned long size = stop - (unsigned long)addr + (bytes - 1);
107 	unsigned long i;
108 
109 	for (i = 0; i < size >> shift; i++, addr += bytes)
110 		dcbi(addr);
111 	mb();	/* sync */
112 }
113 
114 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
115 	do { \
116 		memcpy(dst, src, len); \
117 		flush_icache_user_range(vma, page, vaddr, len); \
118 	} while (0)
119 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
120 	memcpy(dst, src, len)
121 
122 #endif /* __KERNEL__ */
123 
124 #endif /* _ASM_POWERPC_CACHEFLUSH_H */
125