1/* 2 * Copyright (C) 2008 Extreme Engineering Solutions, Inc. 3 * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. 4 * 5 * XPedite5370 3U VPX single-board computer based on MPC8572E 6 * 7 * This is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11 12/dts-v1/; 13/ { 14 model = "xes,xpedite5370"; 15 compatible = "xes,xpedite5370", "xes,MPC8572"; 16 #address-cells = <2>; 17 #size-cells = <2>; 18 19 aliases { 20 ethernet0 = &enet0; 21 ethernet1 = &enet1; 22 serial0 = &serial0; 23 serial1 = &serial1; 24 pci1 = &pci1; 25 pci2 = &pci2; 26 }; 27 28 cpus { 29 #address-cells = <1>; 30 #size-cells = <0>; 31 32 PowerPC,8572@0 { 33 device_type = "cpu"; 34 reg = <0x0>; 35 d-cache-line-size = <32>; // 32 bytes 36 i-cache-line-size = <32>; // 32 bytes 37 d-cache-size = <0x8000>; // L1, 32K 38 i-cache-size = <0x8000>; // L1, 32K 39 timebase-frequency = <0>; 40 bus-frequency = <0>; 41 clock-frequency = <0>; 42 next-level-cache = <&L2>; 43 }; 44 45 PowerPC,8572@1 { 46 device_type = "cpu"; 47 reg = <0x1>; 48 d-cache-line-size = <32>; // 32 bytes 49 i-cache-line-size = <32>; // 32 bytes 50 d-cache-size = <0x8000>; // L1, 32K 51 i-cache-size = <0x8000>; // L1, 32K 52 timebase-frequency = <0>; 53 bus-frequency = <0>; 54 clock-frequency = <0>; 55 next-level-cache = <&L2>; 56 }; 57 }; 58 59 memory { 60 device_type = "memory"; 61 reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot 62 }; 63 64 localbus@ef005000 { 65 #address-cells = <2>; 66 #size-cells = <1>; 67 compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; 68 reg = <0 0xef005000 0 0x1000>; 69 interrupts = <19 2>; 70 interrupt-parent = <&mpic>; 71 /* Local bus region mappings */ 72 ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ 73 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ 74 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ 75 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ 76 77 nor-boot@0,0 { 78 compatible = "amd,s29gl01gp", "cfi-flash"; 79 bank-width = <2>; 80 reg = <0 0 0x8000000>; /* 128MB */ 81 #address-cells = <1>; 82 #size-cells = <1>; 83 partition@0 { 84 label = "Primary user space"; 85 reg = <0x00000000 0x6f00000>; /* 111 MB */ 86 }; 87 partition@6f00000 { 88 label = "Primary kernel"; 89 reg = <0x6f00000 0x1000000>; /* 16 MB */ 90 }; 91 partition@7f00000 { 92 label = "Primary DTB"; 93 reg = <0x7f00000 0x40000>; /* 256 KB */ 94 }; 95 partition@7f40000 { 96 label = "Primary U-Boot environment"; 97 reg = <0x7f40000 0x40000>; /* 256 KB */ 98 }; 99 partition@7f80000 { 100 label = "Primary U-Boot"; 101 reg = <0x7f80000 0x80000>; /* 512 KB */ 102 read-only; 103 }; 104 }; 105 106 nor-alternate@1,0 { 107 compatible = "amd,s29gl01gp", "cfi-flash"; 108 bank-width = <2>; 109 //reg = <0xf0000000 0x08000000>; /* 128MB */ 110 reg = <1 0 0x8000000>; /* 128MB */ 111 #address-cells = <1>; 112 #size-cells = <1>; 113 partition@0 { 114 label = "Secondary user space"; 115 reg = <0x00000000 0x6f00000>; /* 111 MB */ 116 }; 117 partition@6f00000 { 118 label = "Secondary kernel"; 119 reg = <0x6f00000 0x1000000>; /* 16 MB */ 120 }; 121 partition@7f00000 { 122 label = "Secondary DTB"; 123 reg = <0x7f00000 0x40000>; /* 256 KB */ 124 }; 125 partition@7f40000 { 126 label = "Secondary U-Boot environment"; 127 reg = <0x7f40000 0x40000>; /* 256 KB */ 128 }; 129 partition@7f80000 { 130 label = "Secondary U-Boot"; 131 reg = <0x7f80000 0x80000>; /* 512 KB */ 132 read-only; 133 }; 134 }; 135 136 nand@2,0 { 137 #address-cells = <1>; 138 #size-cells = <1>; 139 /* 140 * Actual part could be ST Micro NAND08GW3B2A (1 GB), 141 * Micron MT29F8G08DAA (2x 512 MB), or Micron 142 * MT29F16G08FAA (2x 1 GB), depending on the build 143 * configuration 144 */ 145 compatible = "fsl,mpc8572-fcm-nand", 146 "fsl,elbc-fcm-nand"; 147 reg = <2 0 0x40000>; 148 /* U-Boot should fix this up if chip size > 1 GB */ 149 partition@0 { 150 label = "NAND Filesystem"; 151 reg = <0 0x40000000>; 152 }; 153 }; 154 155 }; 156 157 soc8572@ef000000 { 158 #address-cells = <1>; 159 #size-cells = <1>; 160 device_type = "soc"; 161 compatible = "fsl,mpc8572-immr", "simple-bus"; 162 ranges = <0x0 0 0xef000000 0x100000>; 163 bus-frequency = <0>; // Filled out by uboot. 164 165 ecm-law@0 { 166 compatible = "fsl,ecm-law"; 167 reg = <0x0 0x1000>; 168 fsl,num-laws = <12>; 169 }; 170 171 ecm@1000 { 172 compatible = "fsl,mpc8572-ecm", "fsl,ecm"; 173 reg = <0x1000 0x1000>; 174 interrupts = <17 2>; 175 interrupt-parent = <&mpic>; 176 }; 177 178 memory-controller@2000 { 179 compatible = "fsl,mpc8572-memory-controller"; 180 reg = <0x2000 0x1000>; 181 interrupt-parent = <&mpic>; 182 interrupts = <18 2>; 183 }; 184 185 memory-controller@6000 { 186 compatible = "fsl,mpc8572-memory-controller"; 187 reg = <0x6000 0x1000>; 188 interrupt-parent = <&mpic>; 189 interrupts = <18 2>; 190 }; 191 192 L2: l2-cache-controller@20000 { 193 compatible = "fsl,mpc8572-l2-cache-controller"; 194 reg = <0x20000 0x1000>; 195 cache-line-size = <32>; // 32 bytes 196 cache-size = <0x100000>; // L2, 1M 197 interrupt-parent = <&mpic>; 198 interrupts = <16 2>; 199 }; 200 201 i2c@3000 { 202 #address-cells = <1>; 203 #size-cells = <0>; 204 cell-index = <0>; 205 compatible = "fsl-i2c"; 206 reg = <0x3000 0x100>; 207 interrupts = <43 2>; 208 interrupt-parent = <&mpic>; 209 dfsrr; 210 211 temp-sensor@48 { 212 compatible = "dallas,ds1631", "dallas,ds1621"; 213 reg = <0x48>; 214 }; 215 216 temp-sensor@4c { 217 compatible = "adi,adt7461"; 218 reg = <0x4c>; 219 }; 220 221 cpu-supervisor@51 { 222 compatible = "dallas,ds4510"; 223 reg = <0x51>; 224 }; 225 226 eeprom@54 { 227 compatible = "atmel,at24c128b"; 228 reg = <0x54>; 229 }; 230 231 rtc@68 { 232 compatible = "stm,m41t00", 233 "dallas,ds1338"; 234 reg = <0x68>; 235 }; 236 237 pcie-switch@70 { 238 compatible = "plx,pex8518"; 239 reg = <0x70>; 240 }; 241 242 gpio1: gpio@18 { 243 compatible = "nxp,pca9557"; 244 reg = <0x18>; 245 #gpio-cells = <2>; 246 gpio-controller; 247 polarity = <0x00>; 248 }; 249 250 gpio2: gpio@1c { 251 compatible = "nxp,pca9557"; 252 reg = <0x1c>; 253 #gpio-cells = <2>; 254 gpio-controller; 255 polarity = <0x00>; 256 }; 257 258 gpio3: gpio@1e { 259 compatible = "nxp,pca9557"; 260 reg = <0x1e>; 261 #gpio-cells = <2>; 262 gpio-controller; 263 polarity = <0x00>; 264 }; 265 266 gpio4: gpio@1f { 267 compatible = "nxp,pca9557"; 268 reg = <0x1f>; 269 #gpio-cells = <2>; 270 gpio-controller; 271 polarity = <0x00>; 272 }; 273 }; 274 275 i2c@3100 { 276 #address-cells = <1>; 277 #size-cells = <0>; 278 cell-index = <1>; 279 compatible = "fsl-i2c"; 280 reg = <0x3100 0x100>; 281 interrupts = <43 2>; 282 interrupt-parent = <&mpic>; 283 dfsrr; 284 }; 285 286 dma@c300 { 287 #address-cells = <1>; 288 #size-cells = <1>; 289 compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; 290 reg = <0xc300 0x4>; 291 ranges = <0x0 0xc100 0x200>; 292 cell-index = <1>; 293 dma-channel@0 { 294 compatible = "fsl,mpc8572-dma-channel", 295 "fsl,eloplus-dma-channel"; 296 reg = <0x0 0x80>; 297 cell-index = <0>; 298 interrupt-parent = <&mpic>; 299 interrupts = <76 2>; 300 }; 301 dma-channel@80 { 302 compatible = "fsl,mpc8572-dma-channel", 303 "fsl,eloplus-dma-channel"; 304 reg = <0x80 0x80>; 305 cell-index = <1>; 306 interrupt-parent = <&mpic>; 307 interrupts = <77 2>; 308 }; 309 dma-channel@100 { 310 compatible = "fsl,mpc8572-dma-channel", 311 "fsl,eloplus-dma-channel"; 312 reg = <0x100 0x80>; 313 cell-index = <2>; 314 interrupt-parent = <&mpic>; 315 interrupts = <78 2>; 316 }; 317 dma-channel@180 { 318 compatible = "fsl,mpc8572-dma-channel", 319 "fsl,eloplus-dma-channel"; 320 reg = <0x180 0x80>; 321 cell-index = <3>; 322 interrupt-parent = <&mpic>; 323 interrupts = <79 2>; 324 }; 325 }; 326 327 dma@21300 { 328 #address-cells = <1>; 329 #size-cells = <1>; 330 compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; 331 reg = <0x21300 0x4>; 332 ranges = <0x0 0x21100 0x200>; 333 cell-index = <0>; 334 dma-channel@0 { 335 compatible = "fsl,mpc8572-dma-channel", 336 "fsl,eloplus-dma-channel"; 337 reg = <0x0 0x80>; 338 cell-index = <0>; 339 interrupt-parent = <&mpic>; 340 interrupts = <20 2>; 341 }; 342 dma-channel@80 { 343 compatible = "fsl,mpc8572-dma-channel", 344 "fsl,eloplus-dma-channel"; 345 reg = <0x80 0x80>; 346 cell-index = <1>; 347 interrupt-parent = <&mpic>; 348 interrupts = <21 2>; 349 }; 350 dma-channel@100 { 351 compatible = "fsl,mpc8572-dma-channel", 352 "fsl,eloplus-dma-channel"; 353 reg = <0x100 0x80>; 354 cell-index = <2>; 355 interrupt-parent = <&mpic>; 356 interrupts = <22 2>; 357 }; 358 dma-channel@180 { 359 compatible = "fsl,mpc8572-dma-channel", 360 "fsl,eloplus-dma-channel"; 361 reg = <0x180 0x80>; 362 cell-index = <3>; 363 interrupt-parent = <&mpic>; 364 interrupts = <23 2>; 365 }; 366 }; 367 368 /* eTSEC 1 */ 369 enet0: ethernet@24000 { 370 #address-cells = <1>; 371 #size-cells = <1>; 372 cell-index = <0>; 373 device_type = "network"; 374 model = "eTSEC"; 375 compatible = "gianfar"; 376 reg = <0x24000 0x1000>; 377 ranges = <0x0 0x24000 0x1000>; 378 local-mac-address = [ 00 00 00 00 00 00 ]; 379 interrupts = <29 2 30 2 34 2>; 380 interrupt-parent = <&mpic>; 381 tbi-handle = <&tbi0>; 382 phy-handle = <&phy0>; 383 phy-connection-type = "sgmii"; 384 385 mdio@520 { 386 #address-cells = <1>; 387 #size-cells = <0>; 388 compatible = "fsl,gianfar-mdio"; 389 reg = <0x520 0x20>; 390 391 phy0: ethernet-phy@1 { 392 interrupt-parent = <&mpic>; 393 interrupts = <8 1>; 394 reg = <0x1>; 395 }; 396 phy1: ethernet-phy@2 { 397 interrupt-parent = <&mpic>; 398 interrupts = <8 1>; 399 reg = <0x2>; 400 }; 401 tbi0: tbi-phy@11 { 402 reg = <0x11>; 403 device_type = "tbi-phy"; 404 }; 405 }; 406 }; 407 408 /* eTSEC 2 */ 409 enet1: ethernet@25000 { 410 #address-cells = <1>; 411 #size-cells = <1>; 412 cell-index = <1>; 413 device_type = "network"; 414 model = "eTSEC"; 415 compatible = "gianfar"; 416 reg = <0x25000 0x1000>; 417 ranges = <0x0 0x25000 0x1000>; 418 local-mac-address = [ 00 00 00 00 00 00 ]; 419 interrupts = <35 2 36 2 40 2>; 420 interrupt-parent = <&mpic>; 421 tbi-handle = <&tbi1>; 422 phy-handle = <&phy1>; 423 phy-connection-type = "sgmii"; 424 425 mdio@520 { 426 #address-cells = <1>; 427 #size-cells = <0>; 428 compatible = "fsl,gianfar-tbi"; 429 reg = <0x520 0x20>; 430 431 tbi1: tbi-phy@11 { 432 reg = <0x11>; 433 device_type = "tbi-phy"; 434 }; 435 }; 436 }; 437 438 /* UART0 */ 439 serial0: serial@4500 { 440 cell-index = <0>; 441 device_type = "serial"; 442 compatible = "fsl,ns16550", "ns16550"; 443 reg = <0x4500 0x100>; 444 clock-frequency = <0>; 445 interrupts = <42 2>; 446 interrupt-parent = <&mpic>; 447 }; 448 449 /* UART1 */ 450 serial1: serial@4600 { 451 cell-index = <1>; 452 device_type = "serial"; 453 compatible = "fsl,ns16550", "ns16550"; 454 reg = <0x4600 0x100>; 455 clock-frequency = <0>; 456 interrupts = <42 2>; 457 interrupt-parent = <&mpic>; 458 }; 459 460 global-utilities@e0000 { //global utilities block 461 compatible = "fsl,mpc8572-guts"; 462 reg = <0xe0000 0x1000>; 463 fsl,has-rstcr; 464 }; 465 466 msi@41600 { 467 compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; 468 reg = <0x41600 0x80>; 469 msi-available-ranges = <0 0x100>; 470 interrupts = < 471 0xe0 0 472 0xe1 0 473 0xe2 0 474 0xe3 0 475 0xe4 0 476 0xe5 0 477 0xe6 0 478 0xe7 0>; 479 interrupt-parent = <&mpic>; 480 }; 481 482 crypto@30000 { 483 compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", 484 "fsl,sec2.1", "fsl,sec2.0"; 485 reg = <0x30000 0x10000>; 486 interrupts = <45 2 58 2>; 487 interrupt-parent = <&mpic>; 488 fsl,num-channels = <4>; 489 fsl,channel-fifo-len = <24>; 490 fsl,exec-units-mask = <0x9fe>; 491 fsl,descriptor-types-mask = <0x3ab0ebf>; 492 }; 493 494 mpic: pic@40000 { 495 interrupt-controller; 496 #address-cells = <0>; 497 #interrupt-cells = <2>; 498 reg = <0x40000 0x40000>; 499 compatible = "chrp,open-pic"; 500 device_type = "open-pic"; 501 }; 502 503 gpio0: gpio@f000 { 504 compatible = "fsl,mpc8572-gpio"; 505 reg = <0xf000 0x1000>; 506 interrupts = <47 2>; 507 interrupt-parent = <&mpic>; 508 #gpio-cells = <2>; 509 gpio-controller; 510 }; 511 512 gpio-leds { 513 compatible = "gpio-leds"; 514 515 heartbeat { 516 label = "Heartbeat"; 517 gpios = <&gpio0 4 1>; 518 linux,default-trigger = "heartbeat"; 519 }; 520 521 yellow { 522 label = "Yellow"; 523 gpios = <&gpio0 5 1>; 524 }; 525 526 red { 527 label = "Red"; 528 gpios = <&gpio0 6 1>; 529 }; 530 531 green { 532 label = "Green"; 533 gpios = <&gpio0 7 1>; 534 }; 535 }; 536 537 /* PME (pattern-matcher) */ 538 pme@10000 { 539 compatible = "fsl,mpc8572-pme", "pme8572"; 540 reg = <0x10000 0x5000>; 541 interrupts = <57 2 64 2 65 2 66 2 67 2>; 542 interrupt-parent = <&mpic>; 543 }; 544 545 tlu@2f000 { 546 compatible = "fsl,mpc8572-tlu", "fsl_tlu"; 547 reg = <0x2f000 0x1000>; 548 interupts = <61 2 >; 549 interrupt-parent = <&mpic>; 550 }; 551 552 tlu@15000 { 553 compatible = "fsl,mpc8572-tlu", "fsl_tlu"; 554 reg = <0x15000 0x1000>; 555 interupts = <75 2>; 556 interrupt-parent = <&mpic>; 557 }; 558 }; 559 560 /* 561 * PCI Express controller 3 @ ef008000 is not used. 562 * This would have been pci0 on other mpc85xx platforms. 563 */ 564 565 /* PCI Express controller 2, wired to VPX P1,P2 backplane */ 566 pci1: pcie@ef009000 { 567 compatible = "fsl,mpc8548-pcie"; 568 device_type = "pci"; 569 #interrupt-cells = <1>; 570 #size-cells = <2>; 571 #address-cells = <3>; 572 reg = <0 0xef009000 0 0x1000>; 573 bus-range = <0 255>; 574 ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 575 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; 576 clock-frequency = <33333333>; 577 interrupt-parent = <&mpic>; 578 interrupts = <25 2>; 579 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 580 interrupt-map = < 581 /* IDSEL 0x0 */ 582 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 583 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 584 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 585 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 586 >; 587 pcie@0 { 588 reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; 589 #size-cells = <2>; 590 #address-cells = <3>; 591 device_type = "pci"; 592 ranges = <0x2000000 0x0 0xc0000000 593 0x2000000 0x0 0xc0000000 594 0x0 0x10000000 595 596 0x1000000 0x0 0x0 597 0x1000000 0x0 0x0 598 0x0 0x100000>; 599 }; 600 }; 601 602 /* PCI Express controller 1, wired to PEX8518 PCIe switch */ 603 pci2: pcie@ef00a000 { 604 compatible = "fsl,mpc8548-pcie"; 605 device_type = "pci"; 606 #interrupt-cells = <1>; 607 #size-cells = <2>; 608 #address-cells = <3>; 609 reg = <0 0xef00a000 0 0x1000>; 610 bus-range = <0 255>; 611 ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 612 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; 613 clock-frequency = <33333333>; 614 interrupt-parent = <&mpic>; 615 interrupts = <26 2>; 616 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 617 interrupt-map = < 618 /* IDSEL 0x0 */ 619 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 620 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 621 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 622 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 623 >; 624 pcie@0 { 625 reg = <0x0 0x0 0x0 0x0 0x0>; 626 #size-cells = <2>; 627 #address-cells = <3>; 628 device_type = "pci"; 629 ranges = <0x2000000 0x0 0x80000000 630 0x2000000 0x0 0x80000000 631 0x0 0x40000000 632 633 0x1000000 0x0 0x0 634 0x1000000 0x0 0x0 635 0x0 0x100000>; 636 }; 637 }; 638}; 639