1/*
2 * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
3 * Based on TQM8548 device tree
4 *
5 * XPedite5200 PrPMC/XMC module based on MPC8548E
6 *
7 * This is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12/dts-v1/;
13
14/ {
15	model = "xes,xpedite5200";
16	compatible = "xes,xpedite5200", "xes,MPC8548";
17	#address-cells = <1>;
18	#size-cells = <1>;
19
20	aliases {
21		ethernet0 = &enet0;
22		ethernet1 = &enet1;
23		ethernet2 = &enet2;
24		ethernet3 = &enet3;
25
26		serial0 = &serial0;
27		serial1 = &serial1;
28		pci0 = &pci0;
29	};
30
31	cpus {
32		#address-cells = <1>;
33		#size-cells = <0>;
34
35		PowerPC,8548@0 {
36			device_type = "cpu";
37			reg = <0>;
38			d-cache-line-size = <32>;	// 32 bytes
39			i-cache-line-size = <32>;	// 32 bytes
40			d-cache-size = <0x8000>;	// L1, 32K
41			i-cache-size = <0x8000>;	// L1, 32K
42			next-level-cache = <&L2>;
43		};
44	};
45
46	memory {
47		device_type = "memory";
48		reg = <0x0 0x0>;	// Filled in by U-Boot
49	};
50
51	soc@ef000000 {
52		#address-cells = <1>;
53		#size-cells = <1>;
54		device_type = "soc";
55		ranges = <0x0 0xef000000 0x100000>;
56		bus-frequency = <0>;
57		compatible = "fsl,mpc8548-immr", "simple-bus";
58
59		ecm-law@0 {
60			compatible = "fsl,ecm-law";
61			reg = <0x0 0x1000>;
62			fsl,num-laws = <12>;
63		};
64
65		ecm@1000 {
66			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
67			reg = <0x1000 0x1000>;
68			interrupts = <17 2>;
69			interrupt-parent = <&mpic>;
70		};
71
72		memory-controller@2000 {
73			compatible = "fsl,mpc8548-memory-controller";
74			reg = <0x2000 0x1000>;
75			interrupt-parent = <&mpic>;
76			interrupts = <18 2>;
77		};
78
79		L2: l2-cache-controller@20000 {
80			compatible = "fsl,mpc8548-l2-cache-controller";
81			reg = <0x20000 0x1000>;
82			cache-line-size = <32>;	// 32 bytes
83			cache-size = <0x80000>;	// L2, 512K
84			interrupt-parent = <&mpic>;
85			interrupts = <16 2>;
86		};
87
88		/* On-card I2C */
89		i2c@3000 {
90			#address-cells = <1>;
91			#size-cells = <0>;
92			cell-index = <0>;
93			compatible = "fsl-i2c";
94			reg = <0x3000 0x100>;
95			interrupts = <43 2>;
96			interrupt-parent = <&mpic>;
97			dfsrr;
98
99			/*
100			 * Board GPIO:
101			 * 	0: BRD_CFG0 (1: P14 IO present)
102			 * 	1: BRD_CFG1 (1: FP ethernet present)
103			 * 	2: BRD_CFG2 (1: XMC IO present)
104			 * 	3: XMC root complex indicator
105			 * 	4: Flash boot device indicator
106			 * 	5: Flash write protect enable
107			 * 	6: PMC monarch indicator
108			 * 	7: PMC EREADY
109			 */
110			gpio1: gpio@18 {
111				compatible = "nxp,pca9556";
112				reg = <0x18>;
113				#gpio-cells = <2>;
114				gpio-controller;
115				polarity = <0x00>;
116			};
117
118			/* P14 GPIO */
119			gpio2: gpio@19 {
120				compatible = "nxp,pca9556";
121				reg = <0x19>;
122				#gpio-cells = <2>;
123				gpio-controller;
124				polarity = <0x00>;
125			};
126
127			eeprom@50 {
128				compatible = "atmel,at24c16";
129				reg = <0x50>;
130			};
131
132			rtc@68 {
133				compatible = "st,m41t00",
134					     "dallas,ds1338";
135				reg = <0x68>;
136			};
137
138			dtt@48 {
139				compatible = "maxim,max1237";
140				reg = <0x34>;
141			};
142		};
143
144		/* Off-card I2C */
145		i2c@3100 {
146			#address-cells = <1>;
147			#size-cells = <0>;
148			cell-index = <1>;
149			compatible = "fsl-i2c";
150			reg = <0x3100 0x100>;
151			interrupts = <43 2>;
152			interrupt-parent = <&mpic>;
153			dfsrr;
154		};
155
156		dma@21300 {
157			#address-cells = <1>;
158			#size-cells = <1>;
159			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
160			reg = <0x21300 0x4>;
161			ranges = <0x0 0x21100 0x200>;
162			cell-index = <0>;
163			dma-channel@0 {
164				compatible = "fsl,mpc8548-dma-channel",
165						"fsl,eloplus-dma-channel";
166				reg = <0x0 0x80>;
167				cell-index = <0>;
168				interrupt-parent = <&mpic>;
169				interrupts = <20 2>;
170			};
171			dma-channel@80 {
172				compatible = "fsl,mpc8548-dma-channel",
173						"fsl,eloplus-dma-channel";
174				reg = <0x80 0x80>;
175				cell-index = <1>;
176				interrupt-parent = <&mpic>;
177				interrupts = <21 2>;
178			};
179			dma-channel@100 {
180				compatible = "fsl,mpc8548-dma-channel",
181						"fsl,eloplus-dma-channel";
182				reg = <0x100 0x80>;
183				cell-index = <2>;
184				interrupt-parent = <&mpic>;
185				interrupts = <22 2>;
186			};
187			dma-channel@180 {
188				compatible = "fsl,mpc8548-dma-channel",
189						"fsl,eloplus-dma-channel";
190				reg = <0x180 0x80>;
191				cell-index = <3>;
192				interrupt-parent = <&mpic>;
193				interrupts = <23 2>;
194			};
195		};
196
197		/* eTSEC1: Front panel port 0 */
198		enet0: ethernet@24000 {
199			#address-cells = <1>;
200			#size-cells = <1>;
201			cell-index = <0>;
202			device_type = "network";
203			model = "eTSEC";
204			compatible = "gianfar";
205			reg = <0x24000 0x1000>;
206			ranges = <0x0 0x24000 0x1000>;
207			local-mac-address = [ 00 00 00 00 00 00 ];
208			interrupts = <29 2 30 2 34 2>;
209			interrupt-parent = <&mpic>;
210			tbi-handle = <&tbi0>;
211			phy-handle = <&phy0>;
212
213			mdio@520 {
214				#address-cells = <1>;
215				#size-cells = <0>;
216				compatible = "fsl,gianfar-mdio";
217				reg = <0x520 0x20>;
218
219				phy0: ethernet-phy@1 {
220					interrupt-parent = <&mpic>;
221					interrupts = <8 1>;
222					reg = <0x1>;
223				};
224				phy1: ethernet-phy@2 {
225					interrupt-parent = <&mpic>;
226					interrupts = <8 1>;
227					reg = <0x2>;
228				};
229				phy2: ethernet-phy@3 {
230					interrupt-parent = <&mpic>;
231					interrupts = <8 1>;
232					reg = <0x3>;
233				};
234				phy3: ethernet-phy@4 {
235					interrupt-parent = <&mpic>;
236					interrupts = <8 1>;
237					reg = <0x4>;
238				};
239				tbi0: tbi-phy@11 {
240					reg = <0x11>;
241					device_type = "tbi-phy";
242				};
243			};
244		};
245
246		/* eTSEC2: Front panel port 1 */
247		enet1: ethernet@25000 {
248			#address-cells = <1>;
249			#size-cells = <1>;
250			cell-index = <1>;
251			device_type = "network";
252			model = "eTSEC";
253			compatible = "gianfar";
254			reg = <0x25000 0x1000>;
255			ranges = <0x0 0x25000 0x1000>;
256			local-mac-address = [ 00 00 00 00 00 00 ];
257			interrupts = <35 2 36 2 40 2>;
258			interrupt-parent = <&mpic>;
259			tbi-handle = <&tbi1>;
260			phy-handle = <&phy1>;
261
262			mdio@520 {
263				#address-cells = <1>;
264				#size-cells = <0>;
265				compatible = "fsl,gianfar-tbi";
266				reg = <0x520 0x20>;
267
268				tbi1: tbi-phy@11 {
269					reg = <0x11>;
270					device_type = "tbi-phy";
271				};
272			};
273		};
274
275		/* eTSEC3: Rear panel port 2 */
276		enet2: ethernet@26000 {
277			#address-cells = <1>;
278			#size-cells = <1>;
279			cell-index = <2>;
280			device_type = "network";
281			model = "eTSEC";
282			compatible = "gianfar";
283			reg = <0x26000 0x1000>;
284			ranges = <0x0 0x26000 0x1000>;
285			local-mac-address = [ 00 00 00 00 00 00 ];
286			interrupts = <31 2 32 2 33 2>;
287			interrupt-parent = <&mpic>;
288			tbi-handle = <&tbi2>;
289			phy-handle = <&phy2>;
290
291			mdio@520 {
292				#address-cells = <1>;
293				#size-cells = <0>;
294				compatible = "fsl,gianfar-tbi";
295				reg = <0x520 0x20>;
296
297				tbi2: tbi-phy@11 {
298					reg = <0x11>;
299					device_type = "tbi-phy";
300				};
301			};
302		};
303
304		/* eTSEC4: Rear panel port 3 */
305		enet3: ethernet@27000 {
306			#address-cells = <1>;
307			#size-cells = <1>;
308			cell-index = <3>;
309			device_type = "network";
310			model = "eTSEC";
311			compatible = "gianfar";
312			reg = <0x27000 0x1000>;
313			ranges = <0x0 0x27000 0x1000>;
314			local-mac-address = [ 00 00 00 00 00 00 ];
315			interrupts = <37 2 38 2 39 2>;
316			interrupt-parent = <&mpic>;
317			tbi-handle = <&tbi3>;
318			phy-handle = <&phy3>;
319
320			mdio@520 {
321				#address-cells = <1>;
322				#size-cells = <0>;
323				compatible = "fsl,gianfar-tbi";
324				reg = <0x520 0x20>;
325
326				tbi3: tbi-phy@11 {
327					reg = <0x11>;
328					device_type = "tbi-phy";
329				};
330			};
331		};
332
333		serial0: serial@4500 {
334			cell-index = <0>;
335			device_type = "serial";
336			compatible = "fsl,ns16550", "ns16550";
337			reg = <0x4500 0x100>;
338			clock-frequency = <0>;
339			current-speed = <115200>;
340			interrupts = <42 2>;
341			interrupt-parent = <&mpic>;
342		};
343
344		serial1: serial@4600 {
345			cell-index = <1>;
346			device_type = "serial";
347			compatible = "fsl,ns16550", "ns16550";
348			reg = <0x4600 0x100>;
349			clock-frequency = <0>;
350			current-speed = <115200>;
351			interrupts = <42 2>;
352			interrupt-parent = <&mpic>;
353		};
354
355		global-utilities@e0000 {	// global utilities reg
356			compatible = "fsl,mpc8548-guts";
357			reg = <0xe0000 0x1000>;
358			fsl,has-rstcr;
359		};
360
361		mpic: pic@40000 {
362			interrupt-controller;
363			#address-cells = <0>;
364			#interrupt-cells = <2>;
365			reg = <0x40000 0x40000>;
366			compatible = "chrp,open-pic";
367			device_type = "open-pic";
368		};
369	};
370
371	localbus@ef005000 {
372		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
373			     "simple-bus";
374		#address-cells = <2>;
375		#size-cells = <1>;
376		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
377		interrupt-parent = <&mpic>;
378		interrupts = <19 2>;
379
380		ranges = <
381			0 0x0 0xfc000000 0x04000000	// NOR boot flash
382			1 0x0 0xf8000000 0x04000000	// NOR expansion flash
383			2 0x0 0xef800000 0x00010000	// NAND CE1
384			3 0x0 0xef840000 0x00010000	// NAND CE2
385		>;
386
387		nor-boot@0,0 {
388			#address-cells = <1>;
389			#size-cells = <1>;
390			compatible = "cfi-flash";
391			reg = <0 0x0 0x4000000>;
392			bank-width = <2>;
393
394			partition@0 {
395				label = "Primary OS";
396				reg = <0x00000000 0x180000>;
397			};
398			partition@180000 {
399				label = "Secondary OS";
400				reg = <0x00180000 0x180000>;
401			};
402			partition@300000 {
403				label = "User";
404				reg = <0x00300000 0x3c80000>;
405			};
406			partition@3f80000 {
407				label = "Boot firmware";
408				reg = <0x03f80000 0x80000>;
409			};
410		};
411
412		nor-alternate@1,0 {
413			#address-cells = <1>;
414			#size-cells = <1>;
415			compatible = "cfi-flash";
416			reg = <1 0x0 0x4000000>;
417			bank-width = <2>;
418
419			partition@0 {
420				label = "Filesystem";
421				reg = <0x00000000 0x3f80000>;
422			};
423			partition@3f80000 {
424				label = "Alternate boot firmware";
425				reg = <0x03f80000 0x80000>;
426			};
427		};
428
429		nand@2,0 {
430			#address-cells = <1>;
431			#size-cells = <1>;
432			compatible = "xes,address-ctl-nand";
433			reg = <2 0x0 0x10000>;
434			cle-line = <0x8>;	/* CLE tied to A3 */
435			ale-line = <0x10>;	/* ALE tied to A4 */
436
437			/* U-Boot should fix this up */
438			partition@0 {
439				label = "NAND Filesystem";
440				reg = <0 0x40000000>;
441			};
442		};
443	};
444
445	/* PMC interface */
446	pci0: pci@ef008000 {
447		#interrupt-cells = <1>;
448		#size-cells = <2>;
449		#address-cells = <3>;
450		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
451		device_type = "pci";
452		reg = <0xef008000 0x1000>;
453		clock-frequency = <33333333>;
454		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
455		interrupt-map = <
456				/* IDSEL */
457				 0xe000 0 0 1 &mpic 2 1
458				 0xe000 0 0 2 &mpic 3 1>;
459
460		interrupt-parent = <&mpic>;
461		interrupts = <24 2>;
462		bus-range = <0 0>;
463		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000
464			  0x01000000 0 0x00000000 0xe8000000 0 0x00800000>;
465	};
466
467	/* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */
468};
469