xref: /openbmc/linux/arch/powerpc/boot/dts/tqm8560.dts (revision 55fd7e02)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * TQM 8560 Device Tree Source
4 *
5 * Copyright 2008 Freescale Semiconductor Inc.
6 * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
7 */
8
9/dts-v1/;
10
11/ {
12	model = "tqc,tqm8560";
13	compatible = "tqc,tqm8560";
14	#address-cells = <1>;
15	#size-cells = <1>;
16
17	aliases {
18		ethernet0 = &enet0;
19		ethernet1 = &enet1;
20		ethernet2 = &enet2;
21		serial0 = &serial0;
22		serial1 = &serial1;
23		pci0 = &pci0;
24	};
25
26	cpus {
27		#address-cells = <1>;
28		#size-cells = <0>;
29
30		PowerPC,8560@0 {
31			device_type = "cpu";
32			reg = <0>;
33			d-cache-line-size = <32>;
34			i-cache-line-size = <32>;
35			d-cache-size = <32768>;
36			i-cache-size = <32768>;
37			timebase-frequency = <0>;
38			bus-frequency = <0>;
39			clock-frequency = <0>;
40			next-level-cache = <&L2>;
41		};
42	};
43
44	memory {
45		device_type = "memory";
46		reg = <0x00000000 0x10000000>;
47	};
48
49	soc@e0000000 {
50		#address-cells = <1>;
51		#size-cells = <1>;
52		device_type = "soc";
53		ranges = <0x0 0xe0000000 0x100000>;
54		bus-frequency = <0>;
55		compatible = "fsl,mpc8560-immr", "simple-bus";
56
57		ecm-law@0 {
58			compatible = "fsl,ecm-law";
59			reg = <0x0 0x1000>;
60			fsl,num-laws = <8>;
61		};
62
63		ecm@1000 {
64			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
65			reg = <0x1000 0x1000>;
66			interrupts = <17 2>;
67			interrupt-parent = <&mpic>;
68		};
69
70		memory-controller@2000 {
71			compatible = "fsl,mpc8540-memory-controller";
72			reg = <0x2000 0x1000>;
73			interrupt-parent = <&mpic>;
74			interrupts = <18 2>;
75		};
76
77		L2: l2-cache-controller@20000 {
78			compatible = "fsl,mpc8540-l2-cache-controller";
79			reg = <0x20000 0x1000>;
80			cache-line-size = <32>;
81			cache-size = <0x40000>;	// L2, 256K
82			interrupt-parent = <&mpic>;
83			interrupts = <16 2>;
84		};
85
86		i2c@3000 {
87			#address-cells = <1>;
88			#size-cells = <0>;
89			cell-index = <0>;
90			compatible = "fsl-i2c";
91			reg = <0x3000 0x100>;
92			interrupts = <43 2>;
93			interrupt-parent = <&mpic>;
94			dfsrr;
95
96			dtt@48 {
97				compatible = "national,lm75";
98				reg = <0x48>;
99			};
100
101			rtc@68 {
102				compatible = "dallas,ds1337";
103				reg = <0x68>;
104			};
105		};
106
107		dma@21300 {
108			#address-cells = <1>;
109			#size-cells = <1>;
110			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
111			reg = <0x21300 0x4>;
112			ranges = <0x0 0x21100 0x200>;
113			cell-index = <0>;
114			dma-channel@0 {
115				compatible = "fsl,mpc8560-dma-channel",
116						"fsl,eloplus-dma-channel";
117				reg = <0x0 0x80>;
118				cell-index = <0>;
119				interrupt-parent = <&mpic>;
120				interrupts = <20 2>;
121			};
122			dma-channel@80 {
123				compatible = "fsl,mpc8560-dma-channel",
124						"fsl,eloplus-dma-channel";
125				reg = <0x80 0x80>;
126				cell-index = <1>;
127				interrupt-parent = <&mpic>;
128				interrupts = <21 2>;
129			};
130			dma-channel@100 {
131				compatible = "fsl,mpc8560-dma-channel",
132						"fsl,eloplus-dma-channel";
133				reg = <0x100 0x80>;
134				cell-index = <2>;
135				interrupt-parent = <&mpic>;
136				interrupts = <22 2>;
137			};
138			dma-channel@180 {
139				compatible = "fsl,mpc8560-dma-channel",
140						"fsl,eloplus-dma-channel";
141				reg = <0x180 0x80>;
142				cell-index = <3>;
143				interrupt-parent = <&mpic>;
144				interrupts = <23 2>;
145			};
146		};
147
148		enet0: ethernet@24000 {
149			#address-cells = <1>;
150			#size-cells = <1>;
151			cell-index = <0>;
152			device_type = "network";
153			model = "TSEC";
154			compatible = "gianfar";
155			reg = <0x24000 0x1000>;
156			ranges = <0x0 0x24000 0x1000>;
157			local-mac-address = [ 00 00 00 00 00 00 ];
158			interrupts = <29 2 30 2 34 2>;
159			interrupt-parent = <&mpic>;
160			tbi-handle = <&tbi0>;
161			phy-handle = <&phy2>;
162
163			mdio@520 {
164				#address-cells = <1>;
165				#size-cells = <0>;
166				compatible = "fsl,gianfar-mdio";
167				reg = <0x520 0x20>;
168
169				phy1: ethernet-phy@1 {
170					interrupt-parent = <&mpic>;
171					interrupts = <8 1>;
172					reg = <1>;
173				};
174				phy2: ethernet-phy@2 {
175					interrupt-parent = <&mpic>;
176					interrupts = <8 1>;
177					reg = <2>;
178				};
179				phy3: ethernet-phy@3 {
180					interrupt-parent = <&mpic>;
181					interrupts = <8 1>;
182					reg = <3>;
183				};
184				tbi0: tbi-phy@11 {
185					reg = <0x11>;
186					device_type = "tbi-phy";
187				};
188			};
189		};
190
191		enet1: ethernet@25000 {
192			#address-cells = <1>;
193			#size-cells = <1>;
194			cell-index = <1>;
195			device_type = "network";
196			model = "TSEC";
197			compatible = "gianfar";
198			reg = <0x25000 0x1000>;
199			ranges = <0x0 0x25000 0x1000>;
200			local-mac-address = [ 00 00 00 00 00 00 ];
201			interrupts = <35 2 36 2 40 2>;
202			interrupt-parent = <&mpic>;
203			tbi-handle = <&tbi1>;
204			phy-handle = <&phy1>;
205
206			mdio@520 {
207				#address-cells = <1>;
208				#size-cells = <0>;
209				compatible = "fsl,gianfar-tbi";
210				reg = <0x520 0x20>;
211
212				tbi1: tbi-phy@11 {
213					reg = <0x11>;
214					device_type = "tbi-phy";
215				};
216			};
217		};
218
219		mpic: pic@40000 {
220			interrupt-controller;
221			#address-cells = <0>;
222			#interrupt-cells = <2>;
223			reg = <0x40000 0x40000>;
224			device_type = "open-pic";
225			compatible = "chrp,open-pic";
226		};
227
228		cpm@919c0 {
229			#address-cells = <1>;
230			#size-cells = <1>;
231			compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
232			reg = <0x919c0 0x30>;
233			ranges;
234
235			muram@80000 {
236				#address-cells = <1>;
237				#size-cells = <1>;
238				ranges = <0 0x80000 0x10000>;
239
240				data@0 {
241					compatible = "fsl,cpm-muram-data";
242					reg = <0 0x4000 0x9000 0x2000>;
243				};
244			};
245
246			brg@919f0 {
247				compatible = "fsl,mpc8560-brg",
248				             "fsl,cpm2-brg",
249				             "fsl,cpm-brg";
250				reg = <0x919f0 0x10 0x915f0 0x10>;
251				clock-frequency = <0>;
252			};
253
254			cpmpic: pic@90c00 {
255				interrupt-controller;
256				#address-cells = <0>;
257				#interrupt-cells = <2>;
258				interrupts = <46 2>;
259				interrupt-parent = <&mpic>;
260				reg = <0x90c00 0x80>;
261				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
262			};
263
264			serial0: serial@91a00 {
265				device_type = "serial";
266				compatible = "fsl,mpc8560-scc-uart",
267				             "fsl,cpm2-scc-uart";
268				reg = <0x91a00 0x20 0x88000 0x100>;
269				fsl,cpm-brg = <1>;
270				fsl,cpm-command = <0x800000>;
271				current-speed = <115200>;
272				interrupts = <40 8>;
273				interrupt-parent = <&cpmpic>;
274			};
275
276			serial1: serial@91a20 {
277				device_type = "serial";
278				compatible = "fsl,mpc8560-scc-uart",
279				             "fsl,cpm2-scc-uart";
280				reg = <0x91a20 0x20 0x88100 0x100>;
281				fsl,cpm-brg = <2>;
282				fsl,cpm-command = <0x4a00000>;
283				current-speed = <115200>;
284				interrupts = <41 8>;
285				interrupt-parent = <&cpmpic>;
286			};
287
288			enet2: ethernet@91340 {
289				device_type = "network";
290				compatible = "fsl,mpc8560-fcc-enet",
291				             "fsl,cpm2-fcc-enet";
292				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
293				local-mac-address = [ 00 00 00 00 00 00 ];
294				fsl,cpm-command = <0x1a400300>;
295				interrupts = <34 8>;
296				interrupt-parent = <&cpmpic>;
297				phy-handle = <&phy3>;
298			};
299		};
300	};
301
302	localbus@e0005000 {
303		compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
304			     "simple-bus";
305		#address-cells = <2>;
306		#size-cells = <1>;
307		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
308		interrupt-parent = <&mpic>;
309		interrupts = <19 2>;
310
311		ranges = <
312			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
313			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
314			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
315		>;
316
317		flash@1,0 {
318			#address-cells = <1>;
319			#size-cells = <1>;
320			compatible = "cfi-flash";
321			reg = <1 0x0 0x8000000>;
322			bank-width = <4>;
323			device-width = <1>;
324
325			partition@0 {
326				label = "kernel";
327				reg = <0x00000000 0x00200000>;
328			};
329			partition@200000 {
330				label = "root";
331				reg = <0x00200000 0x00300000>;
332			};
333			partition@500000 {
334				label = "user";
335				reg = <0x00500000 0x07a00000>;
336			};
337			partition@7f00000 {
338				label = "env1";
339				reg = <0x07f00000 0x00040000>;
340			};
341			partition@7f40000 {
342				label = "env2";
343				reg = <0x07f40000 0x00040000>;
344			};
345			partition@7f80000 {
346				label = "u-boot";
347				reg = <0x07f80000 0x00080000>;
348				read-only;
349			};
350		};
351
352		/* Note: CAN support needs be enabled in U-Boot */
353		can0@2,0 {
354			compatible = "intel,82527"; // Bosch CC770
355			reg = <2 0x0 0x100>;
356			interrupts = <4 1>;
357			interrupt-parent = <&mpic>;
358		};
359
360		can1@2,100 {
361			compatible = "intel,82527"; // Bosch CC770
362			reg = <2 0x100 0x100>;
363			interrupts = <4 1>;
364			interrupt-parent = <&mpic>;
365		};
366	};
367
368	pci0: pci@e0008000 {
369		#interrupt-cells = <1>;
370		#size-cells = <2>;
371		#address-cells = <3>;
372		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
373		device_type = "pci";
374		reg = <0xe0008000 0x1000>;
375		clock-frequency = <66666666>;
376		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
377		interrupt-map = <
378				/* IDSEL 28 */
379				 0xe000 0 0 1 &mpic 2 1
380				 0xe000 0 0 2 &mpic 3 1
381				 0xe000 0 0 3 &mpic 6 1
382				 0xe000 0 0 4 &mpic 5 1
383
384				/* IDSEL 11 */
385				 0x5800 0 0 1 &mpic 6 1
386				 0x5800 0 0 2 &mpic 5 1
387				 >;
388
389		interrupt-parent = <&mpic>;
390		interrupts = <24 2>;
391		bus-range = <0 0>;
392		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
393			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
394	};
395};
396