1/* 2 * TQM8548 Device Tree Source 3 * 4 * Copyright 2006 Freescale Semiconductor Inc. 5 * Copyright 2008 Wolfgang Grandegger <wg@denx.de> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or (at your 10 * option) any later version. 11 */ 12 13/dts-v1/; 14 15/ { 16 model = "tqc,tqm8548"; 17 compatible = "tqc,tqm8548"; 18 #address-cells = <1>; 19 #size-cells = <1>; 20 21 aliases { 22 ethernet0 = &enet0; 23 ethernet1 = &enet1; 24 ethernet2 = &enet2; 25 ethernet3 = &enet3; 26 27 serial0 = &serial0; 28 serial1 = &serial1; 29 pci0 = &pci0; 30 pci1 = &pci1; 31 }; 32 33 cpus { 34 #address-cells = <1>; 35 #size-cells = <0>; 36 37 PowerPC,8548@0 { 38 device_type = "cpu"; 39 reg = <0>; 40 d-cache-line-size = <32>; // 32 bytes 41 i-cache-line-size = <32>; // 32 bytes 42 d-cache-size = <0x8000>; // L1, 32K 43 i-cache-size = <0x8000>; // L1, 32K 44 next-level-cache = <&L2>; 45 }; 46 }; 47 48 memory { 49 device_type = "memory"; 50 reg = <0x00000000 0x00000000>; // Filled in by U-Boot 51 }; 52 53 soc@a0000000 { 54 #address-cells = <1>; 55 #size-cells = <1>; 56 device_type = "soc"; 57 ranges = <0x0 0xa0000000 0x100000>; 58 bus-frequency = <0>; 59 compatible = "fsl,mpc8548-immr", "simple-bus"; 60 61 ecm-law@0 { 62 compatible = "fsl,ecm-law"; 63 reg = <0x0 0x1000>; 64 fsl,num-laws = <10>; 65 }; 66 67 ecm@1000 { 68 compatible = "fsl,mpc8548-ecm", "fsl,ecm"; 69 reg = <0x1000 0x1000>; 70 interrupts = <17 2>; 71 interrupt-parent = <&mpic>; 72 }; 73 74 memory-controller@2000 { 75 compatible = "fsl,mpc8548-memory-controller"; 76 reg = <0x2000 0x1000>; 77 interrupt-parent = <&mpic>; 78 interrupts = <18 2>; 79 }; 80 81 L2: l2-cache-controller@20000 { 82 compatible = "fsl,mpc8548-l2-cache-controller"; 83 reg = <0x20000 0x1000>; 84 cache-line-size = <32>; // 32 bytes 85 cache-size = <0x80000>; // L2, 512K 86 interrupt-parent = <&mpic>; 87 interrupts = <16 2>; 88 }; 89 90 i2c@3000 { 91 #address-cells = <1>; 92 #size-cells = <0>; 93 cell-index = <0>; 94 compatible = "fsl-i2c"; 95 reg = <0x3000 0x100>; 96 interrupts = <43 2>; 97 interrupt-parent = <&mpic>; 98 dfsrr; 99 100 dtt@48 { 101 compatible = "national,lm75"; 102 reg = <0x48>; 103 }; 104 105 rtc@68 { 106 compatible = "dallas,ds1337"; 107 reg = <0x68>; 108 }; 109 }; 110 111 i2c@3100 { 112 #address-cells = <1>; 113 #size-cells = <0>; 114 cell-index = <1>; 115 compatible = "fsl-i2c"; 116 reg = <0x3100 0x100>; 117 interrupts = <43 2>; 118 interrupt-parent = <&mpic>; 119 dfsrr; 120 }; 121 122 dma@21300 { 123 #address-cells = <1>; 124 #size-cells = <1>; 125 compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; 126 reg = <0x21300 0x4>; 127 ranges = <0x0 0x21100 0x200>; 128 cell-index = <0>; 129 dma-channel@0 { 130 compatible = "fsl,mpc8548-dma-channel", 131 "fsl,eloplus-dma-channel"; 132 reg = <0x0 0x80>; 133 cell-index = <0>; 134 interrupt-parent = <&mpic>; 135 interrupts = <20 2>; 136 }; 137 dma-channel@80 { 138 compatible = "fsl,mpc8548-dma-channel", 139 "fsl,eloplus-dma-channel"; 140 reg = <0x80 0x80>; 141 cell-index = <1>; 142 interrupt-parent = <&mpic>; 143 interrupts = <21 2>; 144 }; 145 dma-channel@100 { 146 compatible = "fsl,mpc8548-dma-channel", 147 "fsl,eloplus-dma-channel"; 148 reg = <0x100 0x80>; 149 cell-index = <2>; 150 interrupt-parent = <&mpic>; 151 interrupts = <22 2>; 152 }; 153 dma-channel@180 { 154 compatible = "fsl,mpc8548-dma-channel", 155 "fsl,eloplus-dma-channel"; 156 reg = <0x180 0x80>; 157 cell-index = <3>; 158 interrupt-parent = <&mpic>; 159 interrupts = <23 2>; 160 }; 161 }; 162 163 enet0: ethernet@24000 { 164 #address-cells = <1>; 165 #size-cells = <1>; 166 cell-index = <0>; 167 device_type = "network"; 168 model = "eTSEC"; 169 compatible = "gianfar"; 170 reg = <0x24000 0x1000>; 171 ranges = <0x0 0x24000 0x1000>; 172 local-mac-address = [ 00 00 00 00 00 00 ]; 173 interrupts = <29 2 30 2 34 2>; 174 interrupt-parent = <&mpic>; 175 tbi-handle = <&tbi0>; 176 phy-handle = <&phy2>; 177 178 mdio@520 { 179 #address-cells = <1>; 180 #size-cells = <0>; 181 compatible = "fsl,gianfar-mdio"; 182 reg = <0x520 0x20>; 183 184 phy1: ethernet-phy@0 { 185 interrupt-parent = <&mpic>; 186 interrupts = <8 1>; 187 reg = <1>; 188 device_type = "ethernet-phy"; 189 }; 190 phy2: ethernet-phy@1 { 191 interrupt-parent = <&mpic>; 192 interrupts = <8 1>; 193 reg = <2>; 194 device_type = "ethernet-phy"; 195 }; 196 phy3: ethernet-phy@3 { 197 interrupt-parent = <&mpic>; 198 interrupts = <8 1>; 199 reg = <3>; 200 device_type = "ethernet-phy"; 201 }; 202 phy4: ethernet-phy@4 { 203 interrupt-parent = <&mpic>; 204 interrupts = <8 1>; 205 reg = <4>; 206 device_type = "ethernet-phy"; 207 }; 208 phy5: ethernet-phy@5 { 209 interrupt-parent = <&mpic>; 210 interrupts = <8 1>; 211 reg = <5>; 212 device_type = "ethernet-phy"; 213 }; 214 tbi0: tbi-phy@11 { 215 reg = <0x11>; 216 device_type = "tbi-phy"; 217 }; 218 }; 219 }; 220 221 enet1: ethernet@25000 { 222 #address-cells = <1>; 223 #size-cells = <1>; 224 cell-index = <1>; 225 device_type = "network"; 226 model = "eTSEC"; 227 compatible = "gianfar"; 228 reg = <0x25000 0x1000>; 229 ranges = <0x0 0x25000 0x1000>; 230 local-mac-address = [ 00 00 00 00 00 00 ]; 231 interrupts = <35 2 36 2 40 2>; 232 interrupt-parent = <&mpic>; 233 tbi-handle = <&tbi1>; 234 phy-handle = <&phy1>; 235 236 mdio@520 { 237 #address-cells = <1>; 238 #size-cells = <0>; 239 compatible = "fsl,gianfar-tbi"; 240 reg = <0x520 0x20>; 241 242 tbi1: tbi-phy@11 { 243 reg = <0x11>; 244 device_type = "tbi-phy"; 245 }; 246 }; 247 }; 248 249 enet2: ethernet@26000 { 250 #address-cells = <1>; 251 #size-cells = <1>; 252 cell-index = <2>; 253 device_type = "network"; 254 model = "eTSEC"; 255 compatible = "gianfar"; 256 reg = <0x26000 0x1000>; 257 ranges = <0x0 0x26000 0x1000>; 258 local-mac-address = [ 00 00 00 00 00 00 ]; 259 interrupts = <31 2 32 2 33 2>; 260 interrupt-parent = <&mpic>; 261 tbi-handle = <&tbi2>; 262 phy-handle = <&phy4>; 263 264 mdio@520 { 265 #address-cells = <1>; 266 #size-cells = <0>; 267 compatible = "fsl,gianfar-tbi"; 268 reg = <0x520 0x20>; 269 270 tbi2: tbi-phy@11 { 271 reg = <0x11>; 272 device_type = "tbi-phy"; 273 }; 274 }; 275 }; 276 277 enet3: ethernet@27000 { 278 #address-cells = <1>; 279 #size-cells = <1>; 280 cell-index = <3>; 281 device_type = "network"; 282 model = "eTSEC"; 283 compatible = "gianfar"; 284 reg = <0x27000 0x1000>; 285 ranges = <0x0 0x27000 0x1000>; 286 local-mac-address = [ 00 00 00 00 00 00 ]; 287 interrupts = <37 2 38 2 39 2>; 288 interrupt-parent = <&mpic>; 289 tbi-handle = <&tbi3>; 290 phy-handle = <&phy5>; 291 292 mdio@520 { 293 #address-cells = <1>; 294 #size-cells = <0>; 295 compatible = "fsl,gianfar-tbi"; 296 reg = <0x520 0x20>; 297 298 tbi3: tbi-phy@11 { 299 reg = <0x11>; 300 device_type = "tbi-phy"; 301 }; 302 }; 303 }; 304 305 serial0: serial@4500 { 306 cell-index = <0>; 307 device_type = "serial"; 308 compatible = "ns16550"; 309 reg = <0x4500 0x100>; // reg base, size 310 clock-frequency = <0>; // should we fill in in uboot? 311 current-speed = <115200>; 312 interrupts = <42 2>; 313 interrupt-parent = <&mpic>; 314 }; 315 316 serial1: serial@4600 { 317 cell-index = <1>; 318 device_type = "serial"; 319 compatible = "ns16550"; 320 reg = <0x4600 0x100>; // reg base, size 321 clock-frequency = <0>; // should we fill in in uboot? 322 current-speed = <115200>; 323 interrupts = <42 2>; 324 interrupt-parent = <&mpic>; 325 }; 326 327 global-utilities@e0000 { // global utilities reg 328 compatible = "fsl,mpc8548-guts"; 329 reg = <0xe0000 0x1000>; 330 fsl,has-rstcr; 331 }; 332 333 mpic: pic@40000 { 334 interrupt-controller; 335 #address-cells = <0>; 336 #interrupt-cells = <2>; 337 reg = <0x40000 0x40000>; 338 compatible = "chrp,open-pic"; 339 device_type = "open-pic"; 340 }; 341 }; 342 343 localbus@a0005000 { 344 compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", 345 "simple-bus"; 346 #address-cells = <2>; 347 #size-cells = <1>; 348 reg = <0xa0005000 0x100>; // BRx, ORx, etc. 349 350 ranges = < 351 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 352 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 353 2 0x0 0xa3000000 0x00008000 // CAN (2 x i82527) 354 3 0x0 0xa3010000 0x00008000 // NAND FLASH 355 356 >; 357 358 flash@1,0 { 359 #address-cells = <1>; 360 #size-cells = <1>; 361 compatible = "cfi-flash"; 362 reg = <1 0x0 0x8000000>; 363 bank-width = <4>; 364 device-width = <1>; 365 366 partition@0 { 367 label = "kernel"; 368 reg = <0x00000000 0x00200000>; 369 }; 370 partition@200000 { 371 label = "root"; 372 reg = <0x00200000 0x00300000>; 373 }; 374 partition@500000 { 375 label = "user"; 376 reg = <0x00500000 0x07a00000>; 377 }; 378 partition@7f00000 { 379 label = "env1"; 380 reg = <0x07f00000 0x00040000>; 381 }; 382 partition@7f40000 { 383 label = "env2"; 384 reg = <0x07f40000 0x00040000>; 385 }; 386 partition@7f80000 { 387 label = "u-boot"; 388 reg = <0x07f80000 0x00080000>; 389 read-only; 390 }; 391 }; 392 393 /* Note: CAN support needs be enabled in U-Boot */ 394 can0@2,0 { 395 compatible = "intel,82527"; // Bosch CC770 396 reg = <2 0x0 0x100>; 397 interrupts = <4 1>; 398 interrupt-parent = <&mpic>; 399 }; 400 401 can1@2,100 { 402 compatible = "intel,82527"; // Bosch CC770 403 reg = <2 0x100 0x100>; 404 interrupts = <4 1>; 405 interrupt-parent = <&mpic>; 406 }; 407 408 /* Note: NAND support needs to be enabled in U-Boot */ 409 upm@3,0 { 410 #address-cells = <0>; 411 #size-cells = <0>; 412 compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; 413 reg = <3 0x0 0x800>; 414 fsl,upm-addr-offset = <0x10>; 415 fsl,upm-cmd-offset = <0x08>; 416 /* Micron MT29F8G08FAB multi-chip device */ 417 fsl,upm-addr-line-cs-offsets = <0x0 0x200>; 418 fsl,upm-wait-flags = <0x5>; 419 chip-delay = <25>; // in micro-seconds 420 421 nand@0 { 422 #address-cells = <1>; 423 #size-cells = <1>; 424 425 partition@0 { 426 label = "fs"; 427 reg = <0x00000000 0x10000000>; 428 }; 429 }; 430 }; 431 }; 432 433 pci0: pci@a0008000 { 434 #interrupt-cells = <1>; 435 #size-cells = <2>; 436 #address-cells = <3>; 437 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; 438 device_type = "pci"; 439 reg = <0xa0008000 0x1000>; 440 clock-frequency = <33333333>; 441 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 442 interrupt-map = < 443 /* IDSEL 28 */ 444 0xe000 0 0 1 &mpic 2 1 445 0xe000 0 0 2 &mpic 3 1>; 446 447 interrupt-parent = <&mpic>; 448 interrupts = <24 2>; 449 bus-range = <0 0>; 450 ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 451 0x01000000 0 0x00000000 0xa2000000 0 0x01000000>; 452 }; 453 454 pci1: pcie@a000a000 { 455 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 456 interrupt-map = < 457 /* IDSEL 0x0 (PEX) */ 458 0x00000 0 0 1 &mpic 0 1 459 0x00000 0 0 2 &mpic 1 1 460 0x00000 0 0 3 &mpic 2 1 461 0x00000 0 0 4 &mpic 3 1>; 462 463 interrupt-parent = <&mpic>; 464 interrupts = <26 2>; 465 bus-range = <0 0xff>; 466 ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000 467 0x01000000 0 0x00000000 0xaf000000 0 0x08000000>; 468 clock-frequency = <33333333>; 469 #interrupt-cells = <1>; 470 #size-cells = <2>; 471 #address-cells = <3>; 472 reg = <0xa000a000 0x1000>; 473 compatible = "fsl,mpc8548-pcie"; 474 device_type = "pci"; 475 pcie@0 { 476 reg = <0 0 0 0 0>; 477 #size-cells = <2>; 478 #address-cells = <3>; 479 device_type = "pci"; 480 ranges = <0x02000000 0 0xb0000000 0x02000000 0 481 0xb0000000 0 0x10000000 482 0x01000000 0 0x00000000 0x01000000 0 483 0x00000000 0 0x08000000>; 484 }; 485 }; 486}; 487