1/* 2 * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source 3 * 4 * Copyright (C) 2006-2009 Pengutronix 5 * Sascha Hauer <s.hauer@pengutronix.de> 6 * Juergen Beisert <j.beisert@pengutronix.de> 7 * Wolfram Sang <w.sang@pengutronix.de> 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License as published by the 11 * Free Software Foundation; either version 2 of the License, or (at your 12 * option) any later version. 13 */ 14 15/include/ "mpc5200b.dtsi" 16 17&gpt0 { fsl,has-wdt; }; 18&gpt2 { gpio-controller; }; 19&gpt3 { gpio-controller; }; 20&gpt4 { gpio-controller; }; 21&gpt5 { gpio-controller; }; 22&gpt6 { gpio-controller; }; 23&gpt7 { gpio-controller; }; 24 25/ { 26 model = "phytec,pcm032"; 27 compatible = "phytec,pcm032"; 28 29 memory { 30 reg = <0x00000000 0x08000000>; // 128MB 31 }; 32 33 soc5200@f0000000 { 34 psc@2000 { /* PSC1 is ac97 */ 35 compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; 36 cell-index = <0>; 37 }; 38 39 /* PSC2 port is used by CAN1/2 */ 40 psc@2200 { 41 status = "disabled"; 42 }; 43 44 psc@2400 { /* PSC3 in UART mode */ 45 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 46 }; 47 48 /* PSC4 is ??? */ 49 psc@2600 { 50 status = "disabled"; 51 }; 52 53 /* PSC5 is ??? */ 54 psc@2800 { 55 status = "disabled"; 56 }; 57 58 psc@2c00 { /* PSC6 in UART mode */ 59 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 60 }; 61 62 ethernet@3000 { 63 phy-handle = <&phy0>; 64 }; 65 66 mdio@3000 { 67 phy0: ethernet-phy@0 { 68 reg = <0>; 69 }; 70 }; 71 72 i2c@3d40 { 73 rtc@51 { 74 compatible = "nxp,pcf8563"; 75 reg = <0x51>; 76 }; 77 eeprom@52 { 78 compatible = "catalyst,24c32"; 79 reg = <0x52>; 80 pagesize = <32>; 81 }; 82 }; 83 }; 84 85 pci@f0000d00 { 86 interrupt-map-mask = <0xf800 0 0 7>; 87 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot 88 0xc000 0 0 2 &mpc5200_pic 1 1 3 89 0xc000 0 0 3 &mpc5200_pic 1 2 3 90 0xc000 0 0 4 &mpc5200_pic 1 3 3 91 92 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot 93 0xc800 0 0 2 &mpc5200_pic 1 2 3 94 0xc800 0 0 3 &mpc5200_pic 1 3 3 95 0xc800 0 0 4 &mpc5200_pic 0 0 3>; 96 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 97 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 98 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; 99 }; 100 101 localbus { 102 ranges = <0 0 0xfe000000 0x02000000 103 1 0 0xfc000000 0x02000000 104 2 0 0xfbe00000 0x00200000 105 3 0 0xf9e00000 0x02000000 106 4 0 0xf7e00000 0x02000000 107 5 0 0xe6000000 0x02000000 108 6 0 0xe8000000 0x02000000 109 7 0 0xea000000 0x02000000>; 110 111 flash@0,0 { 112 compatible = "cfi-flash"; 113 reg = <0 0 0x02000000>; 114 bank-width = <4>; 115 #size-cells = <1>; 116 #address-cells = <1>; 117 118 partition@0 { 119 label = "ubootl"; 120 reg = <0x00000000 0x00040000>; 121 }; 122 partition@40000 { 123 label = "kernel"; 124 reg = <0x00040000 0x001c0000>; 125 }; 126 partition@200000 { 127 label = "jffs2"; 128 reg = <0x00200000 0x01d00000>; 129 }; 130 partition@1f00000 { 131 label = "uboot"; 132 reg = <0x01f00000 0x00040000>; 133 }; 134 partition@1f40000 { 135 label = "env"; 136 reg = <0x01f40000 0x00040000>; 137 }; 138 partition@1f80000 { 139 label = "oftree"; 140 reg = <0x01f80000 0x00040000>; 141 }; 142 partition@1fc0000 { 143 label = "space"; 144 reg = <0x01fc0000 0x00040000>; 145 }; 146 }; 147 148 sram@2,0 { 149 compatible = "mtd-ram"; 150 reg = <2 0 0x00200000>; 151 bank-width = <2>; 152 }; 153 154 /* 155 * example snippets for FPGA 156 * 157 * fpga@3,0 { 158 * compatible = "fpga_driver"; 159 * reg = <3 0 0x02000000>; 160 * bank-width = <4>; 161 * }; 162 * 163 * fpga@4,0 { 164 * compatible = "fpga_driver"; 165 * reg = <4 0 0x02000000>; 166 * bank-width = <4>; 167 * }; 168 */ 169 170 /* 171 * example snippets for free chipselects 172 * 173 * device@5,0 { 174 * compatible = "custom_driver"; 175 * reg = <5 0 0x02000000>; 176 * }; 177 * 178 * device@6,0 { 179 * compatible = "custom_driver"; 180 * reg = <6 0 0x02000000>; 181 * }; 182 * 183 * device@7,0 { 184 * compatible = "custom_driver"; 185 * reg = <7 0 0x02000000>; 186 * }; 187 */ 188 }; 189}; 190