xref: /openbmc/linux/arch/powerpc/boot/dts/pcm030.dts (revision c6acb1e7) 
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
4 *
5 * Copyright 2006 Pengutronix
6 * Sascha Hauer <s.hauer@pengutronix.de>
7 * Copyright 2007 Pengutronix
8 * Juergen Beisert <j.beisert@pengutronix.de>
9 */
10
11/include/ "mpc5200b.dtsi"
12
13&gpt0 { fsl,has-wdt; };
14&gpt2 { gpio-controller; };
15&gpt3 { gpio-controller; };
16&gpt4 { gpio-controller; };
17&gpt5 { gpio-controller; };
18&gpt6 { gpio-controller; };
19&gpt7 { gpio-controller; };
20
21/ {
22	model = "phytec,pcm030";
23	compatible = "phytec,pcm030";
24
25	soc5200@f0000000 {
26		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
27			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
28			cell-index = <0>;
29		};
30
31		/* PSC2 port is used by CAN1/2 */
32		psc@2200 {
33			status = "disabled";
34		};
35
36		psc@2400 { /* PSC3 in UART mode */
37			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
38		};
39
40		/* PSC4 is ??? */
41		psc@2600 {
42			status = "disabled";
43		};
44
45		/* PSC5 is ??? */
46		psc@2800 {
47			status = "disabled";
48		};
49
50		psc@2c00 { /* PSC6 in UART mode */
51			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
52		};
53
54		ethernet@3000 {
55			phy-handle = <&phy0>;
56		};
57
58		mdio@3000 {
59			phy0: ethernet-phy@0 {
60				reg = <0>;
61			};
62		};
63
64		i2c@3d40 {
65			rtc@51 {
66				compatible = "nxp,pcf8563";
67				reg = <0x51>;
68			};
69			eeprom@52 {
70				compatible = "catalyst,24c32", "atmel,24c32";
71				reg = <0x52>;
72				pagesize = <32>;
73			};
74		};
75
76		sram@8000 {
77			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
78			reg = <0x8000 0x4000>;
79		};
80	};
81
82	pci@f0000d00 {
83		interrupt-map-mask = <0xf800 0 0 7>;
84		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
85				 0xc000 0 0 2 &mpc5200_pic 1 1 3
86				 0xc000 0 0 3 &mpc5200_pic 1 2 3
87				 0xc000 0 0 4 &mpc5200_pic 1 3 3
88
89				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
90				 0xc800 0 0 2 &mpc5200_pic 1 2 3
91				 0xc800 0 0 3 &mpc5200_pic 1 3 3
92				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
93		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
94			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
95			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
96	};
97
98	localbus {
99		status = "disabled";
100	};
101
102	sound {
103		compatible = "phytec,pcm030-audio-fabric";
104		asoc-platform = <&audioplatform>;
105	};
106};
107