1/* 2 * Device Tree Source for Motorola/Emerson MVME5100. 3 * 4 * Copyright 2013 CSC Australia Pty. Ltd. 5 * 6 * This file is licensed under the terms of the GNU General Public 7 * License version 2. This program is licensed "as is" without 8 * any warranty of any kind, whether express or implied. 9 */ 10 11/dts-v1/; 12 13/ { 14 model = "MVME5100"; 15 compatible = "MVME5100"; 16 #address-cells = <1>; 17 #size-cells = <1>; 18 19 aliases { 20 serial0 = &serial0; 21 pci0 = &pci0; 22 }; 23 24 cpus { 25 #address-cells = <1>; 26 #size-cells = <0>; 27 28 PowerPC,7410 { 29 device_type = "cpu"; 30 reg = <0x0>; 31 /* Following required by dtc but not used */ 32 d-cache-line-size = <32>; 33 i-cache-line-size = <32>; 34 i-cache-size = <32768>; 35 d-cache-size = <32768>; 36 timebase-frequency = <25000000>; 37 clock-frequency = <500000000>; 38 bus-frequency = <100000000>; 39 }; 40 }; 41 42 memory { 43 device_type = "memory"; 44 reg = <0x0 0x20000000>; 45 }; 46 47 hawk@fef80000 { 48 #address-cells = <1>; 49 #size-cells = <1>; 50 compatible = "hawk-bridge", "simple-bus"; 51 ranges = <0x0 0xfef80000 0x10000>; 52 reg = <0xfef80000 0x10000>; 53 54 serial0: serial@8000 { 55 device_type = "serial"; 56 compatible = "ns16550"; 57 reg = <0x8000 0x80>; 58 reg-shift = <4>; 59 clock-frequency = <1843200>; 60 current-speed = <9600>; 61 interrupts = <1 1>; // IRQ1 Level Active Low. 62 interrupt-parent = <&mpic>; 63 }; 64 65 serial1: serial@8200 { 66 device_type = "serial"; 67 compatible = "ns16550"; 68 reg = <0x8200 0x80>; 69 reg-shift = <4>; 70 clock-frequency = <1843200>; 71 current-speed = <9600>; 72 interrupts = <1 1>; // IRQ1 Level Active Low. 73 interrupt-parent = <&mpic>; 74 }; 75 76 mpic: interrupt-controller@f3f80000 { 77 #interrupt-cells = <2>; 78 #address-cells = <0>; 79 device_type = "open-pic"; 80 compatible = "chrp,open-pic"; 81 interrupt-controller; 82 reg = <0xf3f80000 0x40000>; 83 }; 84 }; 85 86 pci0: pci@feff0000 { 87 #address-cells = <3>; 88 #size-cells = <2>; 89 #interrupt-cells = <1>; 90 device_type = "pci"; 91 compatible = "hawk-pci"; 92 reg = <0xfec00000 0x400000>; 93 8259-interrupt-acknowledge = <0xfeff0030>; 94 ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000 95 0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>; 96 bus-range = <0 255>; 97 clock-frequency = <33333333>; 98 interrupt-parent = <&mpic>; 99 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 100 interrupt-map = < 101 102 /* 103 * This definition (IDSEL 11) duplicates the 104 * interrupts definition in the i8259 105 * interrupt controller below. 106 * 107 * Do not change the interrupt sense/polarity from 108 * 0x2 to anything else, doing so will cause endless 109 * "spurious" i8259 interrupts to be fielded. 110 */ 111 // IDSEL 11 - iPMC712 PCI/ISA Bridge 112 0x5800 0x0 0x0 0x1 &mpic 0x0 0x2 113 0x5800 0x0 0x0 0x2 &mpic 0x0 0x2 114 0x5800 0x0 0x0 0x3 &mpic 0x0 0x2 115 0x5800 0x0 0x0 0x4 &mpic 0x0 0x2 116 117 /* IDSEL 12 - Not Used */ 118 119 /* IDSEL 13 - Universe VME Bridge */ 120 0x6800 0x0 0x0 0x1 &mpic 0x5 0x1 121 0x6800 0x0 0x0 0x2 &mpic 0x6 0x1 122 0x6800 0x0 0x0 0x3 &mpic 0x7 0x1 123 0x6800 0x0 0x0 0x4 &mpic 0x8 0x1 124 125 /* IDSEL 14 - ENET 1 */ 126 0x7000 0x0 0x0 0x1 &mpic 0x2 0x1 127 128 /* IDSEL 15 - Not Used */ 129 130 /* IDSEL 16 - PMC Slot 1 */ 131 0x8000 0x0 0x0 0x1 &mpic 0x9 0x1 132 0x8000 0x0 0x0 0x2 &mpic 0xa 0x1 133 0x8000 0x0 0x0 0x3 &mpic 0xb 0x1 134 0x8000 0x0 0x0 0x4 &mpic 0xc 0x1 135 136 /* IDSEL 17 - PMC Slot 2 */ 137 0x8800 0x0 0x0 0x1 &mpic 0xc 0x1 138 0x8800 0x0 0x0 0x2 &mpic 0x9 0x1 139 0x8800 0x0 0x0 0x3 &mpic 0xa 0x1 140 0x8800 0x0 0x0 0x4 &mpic 0xb 0x1 141 142 /* IDSEL 18 - Not Used */ 143 144 /* IDSEL 19 - ENET 2 */ 145 0x9800 0x0 0x0 0x1 &mpic 0xd 0x1 146 147 /* IDSEL 20 - PMCSPAN (PCI-X) */ 148 0xa000 0x0 0x0 0x1 &mpic 0x9 0x1 149 0xa000 0x0 0x0 0x2 &mpic 0xa 0x1 150 0xa000 0x0 0x0 0x3 &mpic 0xb 0x1 151 0xa000 0x0 0x0 0x4 &mpic 0xc 0x1 152 153 >; 154 155 isa { 156 #address-cells = <2>; 157 #size-cells = <1>; 158 #interrupt-cells = <2>; 159 device_type = "isa"; 160 compatible = "isa"; 161 ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; 162 interrupt-parent = <&i8259>; 163 164 i8259: interrupt-controller@20 { 165 #interrupt-cells = <2>; 166 #address-cells = <0>; 167 interrupts = <0 2>; 168 device_type = "interrupt-controller"; 169 compatible = "chrp,iic"; 170 interrupt-controller; 171 reg = <1 0x00000020 0x00000002 172 1 0x000000a0 0x00000002 173 1 0x000004d0 0x00000002>; 174 interrupt-parent = <&mpic>; 175 }; 176 177 }; 178 179 }; 180 181 chosen { 182 linux,stdout-path = &serial0; 183 }; 184 185}; 186