xref: /openbmc/linux/arch/powerpc/boot/dts/mucmc52.dts (revision c4a54f70)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Manroland mucmc52 board Device Tree Source
4 *
5 * Copyright (C) 2009 DENX Software Engineering GmbH
6 * Heiko Schocher <hs@denx.de>
7 * Copyright 2006-2007 Secret Lab Technologies Ltd.
8 */
9
10/include/ "mpc5200b.dtsi"
11
12/* Timer pins that need to be in GPIO mode */
13&gpt0 { gpio-controller; };
14&gpt1 { gpio-controller; };
15&gpt2 { gpio-controller; };
16&gpt3 { gpio-controller; };
17
18/* Disabled timers */
19&gpt4 { status = "disabled"; };
20&gpt5 { status = "disabled"; };
21&gpt6 { status = "disabled"; };
22&gpt7 { status = "disabled"; };
23
24/ {
25	model = "manroland,mucmc52";
26	compatible = "manroland,mucmc52";
27
28	soc5200@f0000000 {
29		rtc@800 {
30			status = "disabled";
31		};
32
33		can@900 {
34			status = "disabled";
35		};
36
37		can@980 {
38			status = "disabled";
39		};
40
41		spi@f00 {
42			status = "disabled";
43		};
44
45		usb@1000 {
46			status = "disabled";
47		};
48
49		psc@2000 {		// PSC1
50			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
51		};
52
53		psc@2200 {		// PSC2
54			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
55		};
56
57		psc@2400 {		// PSC3
58			status = "disabled";
59		};
60
61		psc@2600 {		// PSC4
62			status = "disabled";
63		};
64
65		psc@2800 {		// PSC5
66			status = "disabled";
67		};
68
69		psc@2c00 {		// PSC6
70			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
71		};
72
73		ethernet@3000 {
74			phy-handle = <&phy0>;
75		};
76
77		mdio@3000 {
78			phy0: ethernet-phy@0 {
79				compatible = "intel,lxt971";
80				reg = <0>;
81			};
82		};
83
84		i2c@3d00 {
85			status = "disabled";
86		};
87
88		i2c@3d40 {
89			hwmon@2c {
90				compatible = "ad,adm9240";
91				reg = <0x2c>;
92			};
93			rtc@51 {
94				compatible = "nxp,pcf8563";
95				reg = <0x51>;
96			};
97		};
98	};
99
100	pci@f0000d00 {
101		interrupt-map-mask = <0xf800 0 0 7>;
102		interrupt-map = <
103				/* IDSEL 0x10 */
104				0x8000 0 0 1 &mpc5200_pic 0 3 3
105				0x8000 0 0 2 &mpc5200_pic 0 3 3
106				0x8000 0 0 3 &mpc5200_pic 0 2 3
107				0x8000 0 0 4 &mpc5200_pic 0 1 3
108				>;
109		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
110			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
111			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
112	};
113
114	localbus {
115		ranges = <0 0 0xff800000 0x00800000
116			  1 0 0x80000000 0x00800000
117			  3 0 0x80000000 0x00800000>;
118
119		flash@0,0 {
120			compatible = "cfi-flash";
121			reg = <0 0 0x00800000>;
122			bank-width = <4>;
123			device-width = <2>;
124			#size-cells = <1>;
125			#address-cells = <1>;
126			partition@0 {
127				label = "DTS";
128				reg = <0x0 0x00100000>;
129			};
130			partition@100000 {
131				label = "Kernel";
132				reg = <0x100000 0x00200000>;
133			};
134			partition@300000 {
135				label = "RootFS";
136				reg = <0x00300000 0x00200000>;
137			};
138			partition@500000 {
139				label = "user";
140				reg = <0x00500000 0x00200000>;
141			};
142			partition@700000 {
143				label = "U-Boot";
144				reg = <0x00700000 0x00040000>;
145			};
146			partition@740000 {
147				label = "Env";
148				reg = <0x00740000 0x00020000>;
149			};
150			partition@760000 {
151				label = "red. Env";
152				reg = <0x00760000 0x00020000>;
153			};
154			partition@780000 {
155				label = "reserve";
156				reg = <0x00780000 0x00080000>;
157			};
158		};
159
160		simple100: gpio-controller-100@3,600100 {
161			compatible = "manroland,mucmc52-aux-gpio";
162			reg = <3 0x00600100 0x1>;
163			gpio-controller;
164			#gpio-cells = <2>;
165		};
166		simple104: gpio-controller-104@3,600104 {
167			compatible = "manroland,mucmc52-aux-gpio";
168			reg = <3 0x00600104 0x1>;
169			gpio-controller;
170			#gpio-cells = <2>;
171		};
172		simple200: gpio-controller-200@3,600200 {
173			compatible = "manroland,mucmc52-aux-gpio";
174			reg = <3 0x00600200 0x1>;
175			gpio-controller;
176			#gpio-cells = <2>;
177		};
178		simple201: gpio-controller-201@3,600201 {
179			compatible = "manroland,mucmc52-aux-gpio";
180			reg = <3 0x00600201 0x1>;
181			gpio-controller;
182			#gpio-cells = <2>;
183		};
184		simple202: gpio-controller-202@3,600202 {
185			compatible = "manroland,mucmc52-aux-gpio";
186			reg = <3 0x00600202 0x1>;
187			gpio-controller;
188			#gpio-cells = <2>;
189		};
190		simple203: gpio-controller-203@3,600203 {
191			compatible = "manroland,mucmc52-aux-gpio";
192			reg = <3 0x00600203 0x1>;
193			gpio-controller;
194			#gpio-cells = <2>;
195		};
196		simple204: gpio-controller-204@3,600204 {
197			compatible = "manroland,mucmc52-aux-gpio";
198			reg = <3 0x00600204 0x1>;
199			gpio-controller;
200			#gpio-cells = <2>;
201		};
202		simple206: gpio-controller-206@3,600206 {
203			compatible = "manroland,mucmc52-aux-gpio";
204			reg = <3 0x00600206 0x1>;
205			gpio-controller;
206			#gpio-cells = <2>;
207		};
208		simple207: gpio-controller-207@3,600207 {
209			compatible = "manroland,mucmc52-aux-gpio";
210			reg = <3 0x00600207 0x1>;
211			gpio-controller;
212			#gpio-cells = <2>;
213		};
214		simple20f: gpio-controller-20f@3,60020f {
215			compatible = "manroland,mucmc52-aux-gpio";
216			reg = <3 0x0060020f 0x1>;
217			gpio-controller;
218			#gpio-cells = <2>;
219		};
220
221	};
222};
223