1/*
2 * MPC8379E RDB Device Tree Source
3 *
4 * Copyright 2007, 2008 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	compatible = "fsl,mpc8379rdb";
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		ethernet0 = &enet0;
21		ethernet1 = &enet1;
22		serial0 = &serial0;
23		serial1 = &serial1;
24		pci0 = &pci0;
25	};
26
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		PowerPC,8379@0 {
32			device_type = "cpu";
33			reg = <0x0>;
34			d-cache-line-size = <32>;
35			i-cache-line-size = <32>;
36			d-cache-size = <32768>;
37			i-cache-size = <32768>;
38			timebase-frequency = <0>;
39			bus-frequency = <0>;
40			clock-frequency = <0>;
41		};
42	};
43
44	memory {
45		device_type = "memory";
46		reg = <0x00000000 0x10000000>;	// 256MB at 0
47	};
48
49	localbus@e0005000 {
50		#address-cells = <2>;
51		#size-cells = <1>;
52		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
53		reg = <0xe0005000 0x1000>;
54		interrupts = <77 0x8>;
55		interrupt-parent = <&ipic>;
56
57		// CS0 and CS1 are swapped when
58		// booting from nand, but the
59		// addresses are the same.
60		ranges = <0x0 0x0 0xfe000000 0x00800000
61		          0x1 0x0 0xe0600000 0x00008000
62		          0x2 0x0 0xf0000000 0x00020000
63		          0x3 0x0 0xfa000000 0x00008000>;
64
65		flash@0,0 {
66			#address-cells = <1>;
67			#size-cells = <1>;
68			compatible = "cfi-flash";
69			reg = <0x0 0x0 0x800000>;
70			bank-width = <2>;
71			device-width = <1>;
72		};
73
74		nand@1,0 {
75			#address-cells = <1>;
76			#size-cells = <1>;
77			compatible = "fsl,mpc8379-fcm-nand",
78			             "fsl,elbc-fcm-nand";
79			reg = <0x1 0x0 0x8000>;
80
81			u-boot@0 {
82				reg = <0x0 0x100000>;
83				read-only;
84			};
85
86			kernel@100000 {
87				reg = <0x100000 0x300000>;
88			};
89			fs@400000 {
90				reg = <0x400000 0x1c00000>;
91			};
92		};
93	};
94
95	immr@e0000000 {
96		#address-cells = <1>;
97		#size-cells = <1>;
98		device_type = "soc";
99		compatible = "simple-bus";
100		ranges = <0x0 0xe0000000 0x00100000>;
101		reg = <0xe0000000 0x00000200>;
102		bus-frequency = <0>;
103
104		wdt@200 {
105			device_type = "watchdog";
106			compatible = "mpc83xx_wdt";
107			reg = <0x200 0x100>;
108		};
109
110		gpio1: gpio-controller@c00 {
111			#gpio-cells = <2>;
112			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
113			reg = <0xc00 0x100>;
114			interrupts = <74 0x8>;
115			interrupt-parent = <&ipic>;
116			gpio-controller;
117		};
118
119		gpio2: gpio-controller@d00 {
120			#gpio-cells = <2>;
121			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
122			reg = <0xd00 0x100>;
123			interrupts = <75 0x8>;
124			interrupt-parent = <&ipic>;
125			gpio-controller;
126		};
127
128		sleep-nexus {
129			#address-cells = <1>;
130			#size-cells = <1>;
131			compatible = "simple-bus";
132			sleep = <&pmc 0x0c000000>;
133			ranges;
134
135			i2c@3000 {
136				#address-cells = <1>;
137				#size-cells = <0>;
138				cell-index = <0>;
139				compatible = "fsl-i2c";
140				reg = <0x3000 0x100>;
141				interrupts = <14 0x8>;
142				interrupt-parent = <&ipic>;
143				dfsrr;
144
145				dtt@48 {
146					compatible = "national,lm75";
147					reg = <0x48>;
148				};
149
150				at24@50 {
151					compatible = "atmel,24c256";
152					reg = <0x50>;
153				};
154
155				rtc@68 {
156					compatible = "dallas,ds1339";
157					reg = <0x68>;
158				};
159
160				mcu_pio: mcu@a {
161					#gpio-cells = <2>;
162					compatible = "fsl,mc9s08qg8-mpc8379erdb",
163						     "fsl,mcu-mpc8349emitx";
164					reg = <0x0a>;
165					gpio-controller;
166				};
167			};
168
169			sdhci@2e000 {
170				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
171				reg = <0x2e000 0x1000>;
172				interrupts = <42 0x8>;
173				interrupt-parent = <&ipic>;
174				sdhci,wp-inverted;
175				/* Filled in by U-Boot */
176				clock-frequency = <111111111>;
177			};
178		};
179
180		i2c@3100 {
181			#address-cells = <1>;
182			#size-cells = <0>;
183			cell-index = <1>;
184			compatible = "fsl-i2c";
185			reg = <0x3100 0x100>;
186			interrupts = <15 0x8>;
187			interrupt-parent = <&ipic>;
188			dfsrr;
189		};
190
191		spi@7000 {
192			cell-index = <0>;
193			compatible = "fsl,spi";
194			reg = <0x7000 0x1000>;
195			interrupts = <16 0x8>;
196			interrupt-parent = <&ipic>;
197			mode = "cpu";
198		};
199
200		dma@82a8 {
201			#address-cells = <1>;
202			#size-cells = <1>;
203			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
204			reg = <0x82a8 4>;
205			ranges = <0 0x8100 0x1a8>;
206			interrupt-parent = <&ipic>;
207			interrupts = <71 8>;
208			cell-index = <0>;
209			dma-channel@0 {
210				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
211				reg = <0 0x80>;
212				cell-index = <0>;
213				interrupt-parent = <&ipic>;
214				interrupts = <71 8>;
215			};
216			dma-channel@80 {
217				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
218				reg = <0x80 0x80>;
219				cell-index = <1>;
220				interrupt-parent = <&ipic>;
221				interrupts = <71 8>;
222			};
223			dma-channel@100 {
224				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
225				reg = <0x100 0x80>;
226				cell-index = <2>;
227				interrupt-parent = <&ipic>;
228				interrupts = <71 8>;
229			};
230			dma-channel@180 {
231				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
232				reg = <0x180 0x28>;
233				cell-index = <3>;
234				interrupt-parent = <&ipic>;
235				interrupts = <71 8>;
236			};
237		};
238
239		usb@23000 {
240			compatible = "fsl-usb2-dr";
241			reg = <0x23000 0x1000>;
242			#address-cells = <1>;
243			#size-cells = <0>;
244			interrupt-parent = <&ipic>;
245			interrupts = <38 0x8>;
246			phy_type = "ulpi";
247			sleep = <&pmc 0x00c00000>;
248		};
249
250		enet0: ethernet@24000 {
251			#address-cells = <1>;
252			#size-cells = <1>;
253			cell-index = <0>;
254			device_type = "network";
255			model = "eTSEC";
256			compatible = "gianfar";
257			reg = <0x24000 0x1000>;
258			ranges = <0x0 0x24000 0x1000>;
259			local-mac-address = [ 00 00 00 00 00 00 ];
260			interrupts = <32 0x8 33 0x8 34 0x8>;
261			phy-connection-type = "mii";
262			interrupt-parent = <&ipic>;
263			tbi-handle = <&tbi0>;
264			phy-handle = <&phy2>;
265			sleep = <&pmc 0xc0000000>;
266			fsl,magic-packet;
267
268			mdio@520 {
269				#address-cells = <1>;
270				#size-cells = <0>;
271				compatible = "fsl,gianfar-mdio";
272				reg = <0x520 0x20>;
273
274				phy2: ethernet-phy@2 {
275					interrupt-parent = <&ipic>;
276					interrupts = <17 0x8>;
277					reg = <0x2>;
278				};
279
280				tbi0: tbi-phy@11 {
281					reg = <0x11>;
282					device_type = "tbi-phy";
283				};
284			};
285		};
286
287		enet1: ethernet@25000 {
288			#address-cells = <1>;
289			#size-cells = <1>;
290			cell-index = <1>;
291			device_type = "network";
292			model = "eTSEC";
293			compatible = "gianfar";
294			reg = <0x25000 0x1000>;
295			ranges = <0x0 0x25000 0x1000>;
296			local-mac-address = [ 00 00 00 00 00 00 ];
297			interrupts = <35 0x8 36 0x8 37 0x8>;
298			phy-connection-type = "mii";
299			interrupt-parent = <&ipic>;
300			fixed-link = <1 1 1000 0 0>;
301			tbi-handle = <&tbi1>;
302			sleep = <&pmc 0x30000000>;
303			fsl,magic-packet;
304
305			mdio@520 {
306				#address-cells = <1>;
307				#size-cells = <0>;
308				compatible = "fsl,gianfar-tbi";
309				reg = <0x520 0x20>;
310
311				tbi1: tbi-phy@11 {
312					reg = <0x11>;
313					device_type = "tbi-phy";
314				};
315			};
316		};
317
318		serial0: serial@4500 {
319			cell-index = <0>;
320			device_type = "serial";
321			compatible = "fsl,ns16550", "ns16550";
322			reg = <0x4500 0x100>;
323			clock-frequency = <0>;
324			interrupts = <9 0x8>;
325			interrupt-parent = <&ipic>;
326		};
327
328		serial1: serial@4600 {
329			cell-index = <1>;
330			device_type = "serial";
331			compatible = "fsl,ns16550", "ns16550";
332			reg = <0x4600 0x100>;
333			clock-frequency = <0>;
334			interrupts = <10 0x8>;
335			interrupt-parent = <&ipic>;
336		};
337
338		crypto@30000 {
339			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
340				     "fsl,sec2.1", "fsl,sec2.0";
341			reg = <0x30000 0x10000>;
342			interrupts = <11 0x8>;
343			interrupt-parent = <&ipic>;
344			fsl,num-channels = <4>;
345			fsl,channel-fifo-len = <24>;
346			fsl,exec-units-mask = <0x9fe>;
347			fsl,descriptor-types-mask = <0x3ab0ebf>;
348			sleep = <&pmc 0x03000000>;
349		};
350
351		sata@18000 {
352			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
353			reg = <0x18000 0x1000>;
354			interrupts = <44 0x8>;
355			interrupt-parent = <&ipic>;
356			sleep = <&pmc 0x000000c0>;
357		};
358
359		sata@19000 {
360			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
361			reg = <0x19000 0x1000>;
362			interrupts = <45 0x8>;
363			interrupt-parent = <&ipic>;
364			sleep = <&pmc 0x00000030>;
365		};
366
367		sata@1a000 {
368			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
369			reg = <0x1a000 0x1000>;
370			interrupts = <46 0x8>;
371			interrupt-parent = <&ipic>;
372			sleep = <&pmc 0x0000000c>;
373		};
374
375		sata@1b000 {
376			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
377			reg = <0x1b000 0x1000>;
378			interrupts = <47 0x8>;
379			interrupt-parent = <&ipic>;
380			sleep = <&pmc 0x00000003>;
381		};
382
383		/* IPIC
384		 * interrupts cell = <intr #, sense>
385		 * sense values match linux IORESOURCE_IRQ_* defines:
386		 * sense == 8: Level, low assertion
387		 * sense == 2: Edge, high-to-low change
388		 */
389		ipic: interrupt-controller@700 {
390			compatible = "fsl,ipic";
391			interrupt-controller;
392			#address-cells = <0>;
393			#interrupt-cells = <2>;
394			reg = <0x700 0x100>;
395		};
396
397		pmc: power@b00 {
398			compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
399			reg = <0xb00 0x100 0xa00 0x100>;
400			interrupts = <80 0x8>;
401			interrupt-parent = <&ipic>;
402		};
403	};
404
405	pci0: pci@e0008500 {
406		interrupt-map-mask = <0xf800 0 0 7>;
407		interrupt-map = <
408				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
409
410				/* IDSEL AD14 IRQ6 inta */
411				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
412
413				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
414				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
415				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
416				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
417
418				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
419				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
420				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
421				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
422		interrupt-parent = <&ipic>;
423		interrupts = <66 0x8>;
424		bus-range = <0x0 0x0>;
425		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
426		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
427		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
428		sleep = <&pmc 0x00010000>;
429		clock-frequency = <66666666>;
430		#interrupt-cells = <1>;
431		#size-cells = <2>;
432		#address-cells = <3>;
433		reg = <0xe0008500 0x100		/* internal registers */
434		       0xe0008300 0x8>;		/* config space access registers */
435		compatible = "fsl,mpc8349-pci";
436		device_type = "pci";
437	};
438
439	leds {
440		compatible = "gpio-leds";
441
442		pwr {
443			gpios = <&mcu_pio 0 0>;
444			default-state = "on";
445		};
446
447		hdd {
448			gpios = <&mcu_pio 1 0>;
449			linux,default-trigger = "disk-activity";
450		};
451	};
452};
453