1/*
2 * MPC8379E RDB Device Tree Source
3 *
4 * Copyright 2007, 2008 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	compatible = "fsl,mpc8379rdb";
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		ethernet0 = &enet0;
21		ethernet1 = &enet1;
22		serial0 = &serial0;
23		serial1 = &serial1;
24		pci0 = &pci0;
25	};
26
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		PowerPC,8379@0 {
32			device_type = "cpu";
33			reg = <0x0>;
34			d-cache-line-size = <32>;
35			i-cache-line-size = <32>;
36			d-cache-size = <32768>;
37			i-cache-size = <32768>;
38			timebase-frequency = <0>;
39			bus-frequency = <0>;
40			clock-frequency = <0>;
41		};
42	};
43
44	memory {
45		device_type = "memory";
46		reg = <0x00000000 0x10000000>;	// 256MB at 0
47	};
48
49	localbus@e0005000 {
50		#address-cells = <2>;
51		#size-cells = <1>;
52		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
53		reg = <0xe0005000 0x1000>;
54		interrupts = <77 0x8>;
55		interrupt-parent = <&ipic>;
56
57		// CS0 and CS1 are swapped when
58		// booting from nand, but the
59		// addresses are the same.
60		ranges = <0x0 0x0 0xfe000000 0x00800000
61		          0x1 0x0 0xe0600000 0x00008000
62		          0x2 0x0 0xf0000000 0x00020000
63		          0x3 0x0 0xfa000000 0x00008000>;
64
65		flash@0,0 {
66			#address-cells = <1>;
67			#size-cells = <1>;
68			compatible = "cfi-flash";
69			reg = <0x0 0x0 0x800000>;
70			bank-width = <2>;
71			device-width = <1>;
72		};
73
74		nand@1,0 {
75			#address-cells = <1>;
76			#size-cells = <1>;
77			compatible = "fsl,mpc8379-fcm-nand",
78			             "fsl,elbc-fcm-nand";
79			reg = <0x1 0x0 0x8000>;
80
81			u-boot@0 {
82				reg = <0x0 0x100000>;
83				read-only;
84			};
85
86			kernel@100000 {
87				reg = <0x100000 0x300000>;
88			};
89			fs@400000 {
90				reg = <0x400000 0x1c00000>;
91			};
92		};
93	};
94
95	immr@e0000000 {
96		#address-cells = <1>;
97		#size-cells = <1>;
98		device_type = "soc";
99		compatible = "simple-bus";
100		ranges = <0x0 0xe0000000 0x00100000>;
101		reg = <0xe0000000 0x00000200>;
102		bus-frequency = <0>;
103
104		wdt@200 {
105			device_type = "watchdog";
106			compatible = "mpc83xx_wdt";
107			reg = <0x200 0x100>;
108		};
109
110		i2c@3000 {
111			#address-cells = <1>;
112			#size-cells = <0>;
113			cell-index = <0>;
114			compatible = "fsl-i2c";
115			reg = <0x3000 0x100>;
116			interrupts = <14 0x8>;
117			interrupt-parent = <&ipic>;
118			dfsrr;
119			rtc@68 {
120				device_type = "rtc";
121				compatible = "dallas,ds1339";
122				reg = <0x68>;
123			};
124
125			mcu_pio: mcu@a {
126				#gpio-cells = <2>;
127				compatible = "fsl,mc9s08qg8-mpc8379erdb",
128					     "fsl,mcu-mpc8349emitx";
129				reg = <0x0a>;
130				gpio-controller;
131			};
132		};
133
134		i2c@3100 {
135			#address-cells = <1>;
136			#size-cells = <0>;
137			cell-index = <1>;
138			compatible = "fsl-i2c";
139			reg = <0x3100 0x100>;
140			interrupts = <15 0x8>;
141			interrupt-parent = <&ipic>;
142			dfsrr;
143		};
144
145		spi@7000 {
146			cell-index = <0>;
147			compatible = "fsl,spi";
148			reg = <0x7000 0x1000>;
149			interrupts = <16 0x8>;
150			interrupt-parent = <&ipic>;
151			mode = "cpu";
152		};
153
154		dma@82a8 {
155			#address-cells = <1>;
156			#size-cells = <1>;
157			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
158			reg = <0x82a8 4>;
159			ranges = <0 0x8100 0x1a8>;
160			interrupt-parent = <&ipic>;
161			interrupts = <71 8>;
162			cell-index = <0>;
163			dma-channel@0 {
164				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
165				reg = <0 0x80>;
166				cell-index = <0>;
167				interrupt-parent = <&ipic>;
168				interrupts = <71 8>;
169			};
170			dma-channel@80 {
171				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
172				reg = <0x80 0x80>;
173				cell-index = <1>;
174				interrupt-parent = <&ipic>;
175				interrupts = <71 8>;
176			};
177			dma-channel@100 {
178				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
179				reg = <0x100 0x80>;
180				cell-index = <2>;
181				interrupt-parent = <&ipic>;
182				interrupts = <71 8>;
183			};
184			dma-channel@180 {
185				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
186				reg = <0x180 0x28>;
187				cell-index = <3>;
188				interrupt-parent = <&ipic>;
189				interrupts = <71 8>;
190			};
191		};
192
193		usb@23000 {
194			compatible = "fsl-usb2-dr";
195			reg = <0x23000 0x1000>;
196			#address-cells = <1>;
197			#size-cells = <0>;
198			interrupt-parent = <&ipic>;
199			interrupts = <38 0x8>;
200			phy_type = "ulpi";
201		};
202
203		mdio@24520 {
204			#address-cells = <1>;
205			#size-cells = <0>;
206			compatible = "fsl,gianfar-mdio";
207			reg = <0x24520 0x20>;
208			phy2: ethernet-phy@2 {
209				interrupt-parent = <&ipic>;
210				interrupts = <17 0x8>;
211				reg = <0x2>;
212				device_type = "ethernet-phy";
213			};
214		};
215
216		enet0: ethernet@24000 {
217			cell-index = <0>;
218			device_type = "network";
219			model = "eTSEC";
220			compatible = "gianfar";
221			reg = <0x24000 0x1000>;
222			local-mac-address = [ 00 00 00 00 00 00 ];
223			interrupts = <32 0x8 33 0x8 34 0x8>;
224			phy-connection-type = "mii";
225			interrupt-parent = <&ipic>;
226			phy-handle = <&phy2>;
227		};
228
229		enet1: ethernet@25000 {
230			cell-index = <1>;
231			device_type = "network";
232			model = "eTSEC";
233			compatible = "gianfar";
234			reg = <0x25000 0x1000>;
235			local-mac-address = [ 00 00 00 00 00 00 ];
236			interrupts = <35 0x8 36 0x8 37 0x8>;
237			phy-connection-type = "mii";
238			interrupt-parent = <&ipic>;
239			fixed-link = <1 1 1000 0 0>;
240		};
241
242		serial0: serial@4500 {
243			cell-index = <0>;
244			device_type = "serial";
245			compatible = "ns16550";
246			reg = <0x4500 0x100>;
247			clock-frequency = <0>;
248			interrupts = <9 0x8>;
249			interrupt-parent = <&ipic>;
250		};
251
252		serial1: serial@4600 {
253			cell-index = <1>;
254			device_type = "serial";
255			compatible = "ns16550";
256			reg = <0x4600 0x100>;
257			clock-frequency = <0>;
258			interrupts = <10 0x8>;
259			interrupt-parent = <&ipic>;
260		};
261
262		crypto@30000 {
263			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
264				     "fsl,sec2.1", "fsl,sec2.0";
265			reg = <0x30000 0x10000>;
266			interrupts = <11 0x8>;
267			interrupt-parent = <&ipic>;
268			fsl,num-channels = <4>;
269			fsl,channel-fifo-len = <24>;
270			fsl,exec-units-mask = <0x9fe>;
271			fsl,descriptor-types-mask = <0x3ab0ebf>;
272		};
273
274		sata@18000 {
275			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
276			reg = <0x18000 0x1000>;
277			interrupts = <44 0x8>;
278			interrupt-parent = <&ipic>;
279		};
280
281		sata@19000 {
282			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
283			reg = <0x19000 0x1000>;
284			interrupts = <45 0x8>;
285			interrupt-parent = <&ipic>;
286		};
287
288		sata@1a000 {
289			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
290			reg = <0x1a000 0x1000>;
291			interrupts = <46 0x8>;
292			interrupt-parent = <&ipic>;
293		};
294
295		sata@1b000 {
296			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
297			reg = <0x1b000 0x1000>;
298			interrupts = <47 0x8>;
299			interrupt-parent = <&ipic>;
300		};
301
302		/* IPIC
303		 * interrupts cell = <intr #, sense>
304		 * sense values match linux IORESOURCE_IRQ_* defines:
305		 * sense == 8: Level, low assertion
306		 * sense == 2: Edge, high-to-low change
307		 */
308		ipic: interrupt-controller@700 {
309			compatible = "fsl,ipic";
310			interrupt-controller;
311			#address-cells = <0>;
312			#interrupt-cells = <2>;
313			reg = <0x700 0x100>;
314		};
315	};
316
317	pci0: pci@e0008500 {
318		interrupt-map-mask = <0xf800 0 0 7>;
319		interrupt-map = <
320				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
321
322				/* IDSEL AD14 IRQ6 inta */
323				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
324
325				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
326				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
327				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
328				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
329
330				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
331				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
332				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
333				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
334		interrupt-parent = <&ipic>;
335		interrupts = <66 0x8>;
336		bus-range = <0x0 0x0>;
337		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
338		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
339		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
340		clock-frequency = <66666666>;
341		#interrupt-cells = <1>;
342		#size-cells = <2>;
343		#address-cells = <3>;
344		reg = <0xe0008500 0x100		/* internal registers */
345		       0xe0008300 0x8>;		/* config space access registers */
346		compatible = "fsl,mpc8349-pci";
347		device_type = "pci";
348	};
349};
350