1/* 2 * MPC8378E RDB Device Tree Source 3 * 4 * Copyright 2007, 2008 Freescale Semiconductor Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 */ 11 12/dts-v1/; 13 14/ { 15 compatible = "fsl,mpc8378rdb"; 16 #address-cells = <1>; 17 #size-cells = <1>; 18 19 aliases { 20 ethernet0 = &enet0; 21 ethernet1 = &enet1; 22 serial0 = &serial0; 23 serial1 = &serial1; 24 pci0 = &pci0; 25 pci1 = &pci1; 26 pci2 = &pci2; 27 }; 28 29 cpus { 30 #address-cells = <1>; 31 #size-cells = <0>; 32 33 PowerPC,8378@0 { 34 device_type = "cpu"; 35 reg = <0x0>; 36 d-cache-line-size = <32>; 37 i-cache-line-size = <32>; 38 d-cache-size = <32768>; 39 i-cache-size = <32768>; 40 timebase-frequency = <0>; 41 bus-frequency = <0>; 42 clock-frequency = <0>; 43 }; 44 }; 45 46 memory { 47 device_type = "memory"; 48 reg = <0x00000000 0x10000000>; // 256MB at 0 49 }; 50 51 localbus@e0005000 { 52 #address-cells = <2>; 53 #size-cells = <1>; 54 compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; 55 reg = <0xe0005000 0x1000>; 56 interrupts = <77 0x8>; 57 interrupt-parent = <&ipic>; 58 59 // CS0 and CS1 are swapped when 60 // booting from nand, but the 61 // addresses are the same. 62 ranges = <0x0 0x0 0xfe000000 0x00800000 63 0x1 0x0 0xe0600000 0x00008000 64 0x2 0x0 0xf0000000 0x00020000 65 0x3 0x0 0xfa000000 0x00008000>; 66 67 flash@0,0 { 68 #address-cells = <1>; 69 #size-cells = <1>; 70 compatible = "cfi-flash"; 71 reg = <0x0 0x0 0x800000>; 72 bank-width = <2>; 73 device-width = <1>; 74 }; 75 76 nand@1,0 { 77 #address-cells = <1>; 78 #size-cells = <1>; 79 compatible = "fsl,mpc8378-fcm-nand", 80 "fsl,elbc-fcm-nand"; 81 reg = <0x1 0x0 0x8000>; 82 83 u-boot@0 { 84 reg = <0x0 0x100000>; 85 read-only; 86 }; 87 88 kernel@100000 { 89 reg = <0x100000 0x300000>; 90 }; 91 fs@400000 { 92 reg = <0x400000 0x1c00000>; 93 }; 94 }; 95 }; 96 97 immr@e0000000 { 98 #address-cells = <1>; 99 #size-cells = <1>; 100 device_type = "soc"; 101 compatible = "simple-bus"; 102 ranges = <0x0 0xe0000000 0x00100000>; 103 reg = <0xe0000000 0x00000200>; 104 bus-frequency = <0>; 105 106 wdt@200 { 107 device_type = "watchdog"; 108 compatible = "mpc83xx_wdt"; 109 reg = <0x200 0x100>; 110 }; 111 112 gpio1: gpio-controller@c00 { 113 #gpio-cells = <2>; 114 compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; 115 reg = <0xc00 0x100>; 116 interrupts = <74 0x8>; 117 interrupt-parent = <&ipic>; 118 gpio-controller; 119 }; 120 121 gpio2: gpio-controller@d00 { 122 #gpio-cells = <2>; 123 compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; 124 reg = <0xd00 0x100>; 125 interrupts = <75 0x8>; 126 interrupt-parent = <&ipic>; 127 gpio-controller; 128 }; 129 130 sleep-nexus { 131 #address-cells = <1>; 132 #size-cells = <1>; 133 compatible = "simple-bus"; 134 sleep = <&pmc 0x0c000000>; 135 ranges; 136 137 i2c@3000 { 138 #address-cells = <1>; 139 #size-cells = <0>; 140 cell-index = <0>; 141 compatible = "fsl-i2c"; 142 reg = <0x3000 0x100>; 143 interrupts = <14 0x8>; 144 interrupt-parent = <&ipic>; 145 dfsrr; 146 147 dtt@48 { 148 compatible = "national,lm75"; 149 reg = <0x48>; 150 }; 151 152 at24@50 { 153 compatible = "at24,24c256"; 154 reg = <0x50>; 155 }; 156 157 rtc@68 { 158 compatible = "dallas,ds1339"; 159 reg = <0x68>; 160 }; 161 162 mcu_pio: mcu@a { 163 #gpio-cells = <2>; 164 compatible = "fsl,mc9s08qg8-mpc8378erdb", 165 "fsl,mcu-mpc8349emitx"; 166 reg = <0x0a>; 167 gpio-controller; 168 }; 169 }; 170 171 sdhci@2e000 { 172 compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; 173 reg = <0x2e000 0x1000>; 174 interrupts = <42 0x8>; 175 interrupt-parent = <&ipic>; 176 sdhci,wp-inverted; 177 /* Filled in by U-Boot */ 178 clock-frequency = <111111111>; 179 }; 180 }; 181 182 i2c@3100 { 183 #address-cells = <1>; 184 #size-cells = <0>; 185 cell-index = <1>; 186 compatible = "fsl-i2c"; 187 reg = <0x3100 0x100>; 188 interrupts = <15 0x8>; 189 interrupt-parent = <&ipic>; 190 dfsrr; 191 }; 192 193 spi@7000 { 194 cell-index = <0>; 195 compatible = "fsl,spi"; 196 reg = <0x7000 0x1000>; 197 interrupts = <16 0x8>; 198 interrupt-parent = <&ipic>; 199 mode = "cpu"; 200 }; 201 202 dma@82a8 { 203 #address-cells = <1>; 204 #size-cells = <1>; 205 compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; 206 reg = <0x82a8 4>; 207 ranges = <0 0x8100 0x1a8>; 208 interrupt-parent = <&ipic>; 209 interrupts = <71 8>; 210 cell-index = <0>; 211 dma-channel@0 { 212 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 213 reg = <0 0x80>; 214 cell-index = <0>; 215 interrupt-parent = <&ipic>; 216 interrupts = <71 8>; 217 }; 218 dma-channel@80 { 219 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 220 reg = <0x80 0x80>; 221 cell-index = <1>; 222 interrupt-parent = <&ipic>; 223 interrupts = <71 8>; 224 }; 225 dma-channel@100 { 226 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 227 reg = <0x100 0x80>; 228 cell-index = <2>; 229 interrupt-parent = <&ipic>; 230 interrupts = <71 8>; 231 }; 232 dma-channel@180 { 233 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 234 reg = <0x180 0x28>; 235 cell-index = <3>; 236 interrupt-parent = <&ipic>; 237 interrupts = <71 8>; 238 }; 239 }; 240 241 usb@23000 { 242 compatible = "fsl-usb2-dr"; 243 reg = <0x23000 0x1000>; 244 #address-cells = <1>; 245 #size-cells = <0>; 246 interrupt-parent = <&ipic>; 247 interrupts = <38 0x8>; 248 phy_type = "ulpi"; 249 sleep = <&pmc 0x00c00000>; 250 }; 251 252 enet0: ethernet@24000 { 253 #address-cells = <1>; 254 #size-cells = <1>; 255 cell-index = <0>; 256 device_type = "network"; 257 model = "eTSEC"; 258 compatible = "gianfar"; 259 reg = <0x24000 0x1000>; 260 ranges = <0x0 0x24000 0x1000>; 261 local-mac-address = [ 00 00 00 00 00 00 ]; 262 interrupts = <32 0x8 33 0x8 34 0x8>; 263 phy-connection-type = "mii"; 264 interrupt-parent = <&ipic>; 265 tbi-handle = <&tbi0>; 266 phy-handle = <&phy2>; 267 sleep = <&pmc 0xc0000000>; 268 fsl,magic-packet; 269 270 mdio@520 { 271 #address-cells = <1>; 272 #size-cells = <0>; 273 compatible = "fsl,gianfar-mdio"; 274 reg = <0x520 0x20>; 275 276 phy2: ethernet-phy@2 { 277 interrupt-parent = <&ipic>; 278 interrupts = <17 0x8>; 279 reg = <0x2>; 280 }; 281 282 tbi0: tbi-phy@11 { 283 reg = <0x11>; 284 device_type = "tbi-phy"; 285 }; 286 }; 287 }; 288 289 enet1: ethernet@25000 { 290 #address-cells = <1>; 291 #size-cells = <1>; 292 cell-index = <1>; 293 device_type = "network"; 294 model = "eTSEC"; 295 compatible = "gianfar"; 296 reg = <0x25000 0x1000>; 297 ranges = <0x0 0x25000 0x1000>; 298 local-mac-address = [ 00 00 00 00 00 00 ]; 299 interrupts = <35 0x8 36 0x8 37 0x8>; 300 phy-connection-type = "mii"; 301 interrupt-parent = <&ipic>; 302 fixed-link = <1 1 1000 0 0>; 303 tbi-handle = <&tbi1>; 304 sleep = <&pmc 0x30000000>; 305 fsl,magic-packet; 306 307 mdio@520 { 308 #address-cells = <1>; 309 #size-cells = <0>; 310 compatible = "fsl,gianfar-tbi"; 311 reg = <0x520 0x20>; 312 313 tbi1: tbi-phy@11 { 314 reg = <0x11>; 315 device_type = "tbi-phy"; 316 }; 317 }; 318 }; 319 320 serial0: serial@4500 { 321 cell-index = <0>; 322 device_type = "serial"; 323 compatible = "fsl,ns16550", "ns16550"; 324 reg = <0x4500 0x100>; 325 clock-frequency = <0>; 326 interrupts = <9 0x8>; 327 interrupt-parent = <&ipic>; 328 }; 329 330 serial1: serial@4600 { 331 cell-index = <1>; 332 device_type = "serial"; 333 compatible = "fsl,ns16550", "ns16550"; 334 reg = <0x4600 0x100>; 335 clock-frequency = <0>; 336 interrupts = <10 0x8>; 337 interrupt-parent = <&ipic>; 338 }; 339 340 crypto@30000 { 341 compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", 342 "fsl,sec2.1", "fsl,sec2.0"; 343 reg = <0x30000 0x10000>; 344 interrupts = <11 0x8>; 345 interrupt-parent = <&ipic>; 346 fsl,num-channels = <4>; 347 fsl,channel-fifo-len = <24>; 348 fsl,exec-units-mask = <0x9fe>; 349 fsl,descriptor-types-mask = <0x3ab0ebf>; 350 sleep = <&pmc 0x03000000>; 351 }; 352 353 /* IPIC 354 * interrupts cell = <intr #, sense> 355 * sense values match linux IORESOURCE_IRQ_* defines: 356 * sense == 8: Level, low assertion 357 * sense == 2: Edge, high-to-low change 358 */ 359 ipic: interrupt-controller@700 { 360 compatible = "fsl,ipic"; 361 interrupt-controller; 362 #address-cells = <0>; 363 #interrupt-cells = <2>; 364 reg = <0x700 0x100>; 365 }; 366 367 pmc: power@b00 { 368 compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; 369 reg = <0xb00 0x100 0xa00 0x100>; 370 interrupts = <80 0x8>; 371 interrupt-parent = <&ipic>; 372 }; 373 }; 374 375 pci0: pci@e0008500 { 376 interrupt-map-mask = <0xf800 0 0 7>; 377 interrupt-map = < 378 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ 379 380 /* IDSEL AD14 IRQ6 inta */ 381 0x7000 0x0 0x0 0x1 &ipic 22 0x8 382 383 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ 384 0x7800 0x0 0x0 0x1 &ipic 21 0x8 385 0x7800 0x0 0x0 0x2 &ipic 22 0x8 386 0x7800 0x0 0x0 0x4 &ipic 23 0x8 387 388 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ 389 0xE000 0x0 0x0 0x1 &ipic 23 0x8 390 0xE000 0x0 0x0 0x2 &ipic 21 0x8 391 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; 392 interrupt-parent = <&ipic>; 393 interrupts = <66 0x8>; 394 bus-range = <0 0>; 395 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 396 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 397 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; 398 sleep = <&pmc 0x00010000>; 399 clock-frequency = <66666666>; 400 #interrupt-cells = <1>; 401 #size-cells = <2>; 402 #address-cells = <3>; 403 reg = <0xe0008500 0x100 /* internal registers */ 404 0xe0008300 0x8>; /* config space access registers */ 405 compatible = "fsl,mpc8349-pci"; 406 device_type = "pci"; 407 }; 408 409 pci1: pcie@e0009000 { 410 #address-cells = <3>; 411 #size-cells = <2>; 412 #interrupt-cells = <1>; 413 device_type = "pci"; 414 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; 415 reg = <0xe0009000 0x00001000>; 416 ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 417 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; 418 bus-range = <0 255>; 419 interrupt-map-mask = <0xf800 0 0 7>; 420 interrupt-map = <0 0 0 1 &ipic 1 8 421 0 0 0 2 &ipic 1 8 422 0 0 0 3 &ipic 1 8 423 0 0 0 4 &ipic 1 8>; 424 sleep = <&pmc 0x00300000>; 425 clock-frequency = <0>; 426 427 pcie@0 { 428 #address-cells = <3>; 429 #size-cells = <2>; 430 device_type = "pci"; 431 reg = <0 0 0 0 0>; 432 ranges = <0x02000000 0 0xa8000000 433 0x02000000 0 0xa8000000 434 0 0x10000000 435 0x01000000 0 0x00000000 436 0x01000000 0 0x00000000 437 0 0x00800000>; 438 }; 439 }; 440 441 pci2: pcie@e000a000 { 442 #address-cells = <3>; 443 #size-cells = <2>; 444 #interrupt-cells = <1>; 445 device_type = "pci"; 446 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; 447 reg = <0xe000a000 0x00001000>; 448 ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 449 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; 450 bus-range = <0 255>; 451 interrupt-map-mask = <0xf800 0 0 7>; 452 interrupt-map = <0 0 0 1 &ipic 2 8 453 0 0 0 2 &ipic 2 8 454 0 0 0 3 &ipic 2 8 455 0 0 0 4 &ipic 2 8>; 456 sleep = <&pmc 0x000c0000>; 457 clock-frequency = <0>; 458 459 pcie@0 { 460 #address-cells = <3>; 461 #size-cells = <2>; 462 device_type = "pci"; 463 reg = <0 0 0 0 0>; 464 ranges = <0x02000000 0 0xc8000000 465 0x02000000 0 0xc8000000 466 0 0x10000000 467 0x01000000 0 0x00000000 468 0x01000000 0 0x00000000 469 0 0x00800000>; 470 }; 471 }; 472 473 leds { 474 compatible = "gpio-leds"; 475 476 pwr { 477 gpios = <&mcu_pio 0 0>; 478 default-state = "on"; 479 }; 480 481 hdd { 482 gpios = <&mcu_pio 1 0>; 483 linux,default-trigger = "disk-activity"; 484 }; 485 }; 486}; 487