1/* 2 * MPC8378E RDB Device Tree Source 3 * 4 * Copyright 2007, 2008 Freescale Semiconductor Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 */ 11 12/dts-v1/; 13 14/ { 15 compatible = "fsl,mpc8378rdb"; 16 #address-cells = <1>; 17 #size-cells = <1>; 18 19 aliases { 20 ethernet0 = &enet0; 21 ethernet1 = &enet1; 22 serial0 = &serial0; 23 serial1 = &serial1; 24 pci0 = &pci0; 25 pci1 = &pci1; 26 pci2 = &pci2; 27 }; 28 29 cpus { 30 #address-cells = <1>; 31 #size-cells = <0>; 32 33 PowerPC,8378@0 { 34 device_type = "cpu"; 35 reg = <0x0>; 36 d-cache-line-size = <32>; 37 i-cache-line-size = <32>; 38 d-cache-size = <32768>; 39 i-cache-size = <32768>; 40 timebase-frequency = <0>; 41 bus-frequency = <0>; 42 clock-frequency = <0>; 43 }; 44 }; 45 46 memory { 47 device_type = "memory"; 48 reg = <0x00000000 0x10000000>; // 256MB at 0 49 }; 50 51 localbus@e0005000 { 52 #address-cells = <2>; 53 #size-cells = <1>; 54 compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; 55 reg = <0xe0005000 0x1000>; 56 interrupts = <77 0x8>; 57 interrupt-parent = <&ipic>; 58 59 // CS0 and CS1 are swapped when 60 // booting from nand, but the 61 // addresses are the same. 62 ranges = <0x0 0x0 0xfe000000 0x00800000 63 0x1 0x0 0xe0600000 0x00008000 64 0x2 0x0 0xf0000000 0x00020000 65 0x3 0x0 0xfa000000 0x00008000>; 66 67 flash@0,0 { 68 #address-cells = <1>; 69 #size-cells = <1>; 70 compatible = "cfi-flash"; 71 reg = <0x0 0x0 0x800000>; 72 bank-width = <2>; 73 device-width = <1>; 74 }; 75 76 nand@1,0 { 77 #address-cells = <1>; 78 #size-cells = <1>; 79 compatible = "fsl,mpc8378-fcm-nand", 80 "fsl,elbc-fcm-nand"; 81 reg = <0x1 0x0 0x8000>; 82 83 u-boot@0 { 84 reg = <0x0 0x100000>; 85 read-only; 86 }; 87 88 kernel@100000 { 89 reg = <0x100000 0x300000>; 90 }; 91 fs@400000 { 92 reg = <0x400000 0x1c00000>; 93 }; 94 }; 95 }; 96 97 immr@e0000000 { 98 #address-cells = <1>; 99 #size-cells = <1>; 100 device_type = "soc"; 101 compatible = "simple-bus"; 102 ranges = <0x0 0xe0000000 0x00100000>; 103 reg = <0xe0000000 0x00000200>; 104 bus-frequency = <0>; 105 106 wdt@200 { 107 device_type = "watchdog"; 108 compatible = "mpc83xx_wdt"; 109 reg = <0x200 0x100>; 110 }; 111 112 gpio1: gpio-controller@c00 { 113 #gpio-cells = <2>; 114 compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; 115 reg = <0xc00 0x100>; 116 interrupts = <74 0x8>; 117 interrupt-parent = <&ipic>; 118 gpio-controller; 119 }; 120 121 gpio2: gpio-controller@d00 { 122 #gpio-cells = <2>; 123 compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; 124 reg = <0xd00 0x100>; 125 interrupts = <75 0x8>; 126 interrupt-parent = <&ipic>; 127 gpio-controller; 128 }; 129 130 sleep-nexus { 131 #address-cells = <1>; 132 #size-cells = <1>; 133 compatible = "simple-bus"; 134 sleep = <&pmc 0x0c000000>; 135 ranges; 136 137 i2c@3000 { 138 #address-cells = <1>; 139 #size-cells = <0>; 140 cell-index = <0>; 141 compatible = "fsl-i2c"; 142 reg = <0x3000 0x100>; 143 interrupts = <14 0x8>; 144 interrupt-parent = <&ipic>; 145 dfsrr; 146 147 dtt@48 { 148 compatible = "national,lm75"; 149 reg = <0x48>; 150 }; 151 152 at24@50 { 153 compatible = "at24,24c256"; 154 reg = <0x50>; 155 }; 156 157 rtc@68 { 158 compatible = "dallas,ds1339"; 159 reg = <0x68>; 160 }; 161 162 mcu_pio: mcu@a { 163 #gpio-cells = <2>; 164 compatible = "fsl,mc9s08qg8-mpc8378erdb", 165 "fsl,mcu-mpc8349emitx"; 166 reg = <0x0a>; 167 gpio-controller; 168 }; 169 }; 170 171 sdhci@2e000 { 172 compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; 173 reg = <0x2e000 0x1000>; 174 interrupts = <42 0x8>; 175 interrupt-parent = <&ipic>; 176 sdhci,wp-inverted; 177 /* Filled in by U-Boot */ 178 clock-frequency = <111111111>; 179 }; 180 }; 181 182 i2c@3100 { 183 #address-cells = <1>; 184 #size-cells = <0>; 185 cell-index = <1>; 186 compatible = "fsl-i2c"; 187 reg = <0x3100 0x100>; 188 interrupts = <15 0x8>; 189 interrupt-parent = <&ipic>; 190 dfsrr; 191 }; 192 193 spi@7000 { 194 cell-index = <0>; 195 compatible = "fsl,spi"; 196 reg = <0x7000 0x1000>; 197 interrupts = <16 0x8>; 198 interrupt-parent = <&ipic>; 199 mode = "cpu"; 200 }; 201 202 dma@82a8 { 203 #address-cells = <1>; 204 #size-cells = <1>; 205 compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; 206 reg = <0x82a8 4>; 207 ranges = <0 0x8100 0x1a8>; 208 interrupt-parent = <&ipic>; 209 interrupts = <71 8>; 210 cell-index = <0>; 211 dma-channel@0 { 212 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 213 reg = <0 0x80>; 214 cell-index = <0>; 215 interrupt-parent = <&ipic>; 216 interrupts = <71 8>; 217 }; 218 dma-channel@80 { 219 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 220 reg = <0x80 0x80>; 221 cell-index = <1>; 222 interrupt-parent = <&ipic>; 223 interrupts = <71 8>; 224 }; 225 dma-channel@100 { 226 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 227 reg = <0x100 0x80>; 228 cell-index = <2>; 229 interrupt-parent = <&ipic>; 230 interrupts = <71 8>; 231 }; 232 dma-channel@180 { 233 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 234 reg = <0x180 0x28>; 235 cell-index = <3>; 236 interrupt-parent = <&ipic>; 237 interrupts = <71 8>; 238 }; 239 }; 240 241 usb@23000 { 242 compatible = "fsl-usb2-dr"; 243 reg = <0x23000 0x1000>; 244 #address-cells = <1>; 245 #size-cells = <0>; 246 interrupt-parent = <&ipic>; 247 interrupts = <38 0x8>; 248 phy_type = "ulpi"; 249 sleep = <&pmc 0x00c00000>; 250 }; 251 252 enet0: ethernet@24000 { 253 #address-cells = <1>; 254 #size-cells = <1>; 255 cell-index = <0>; 256 device_type = "network"; 257 model = "eTSEC"; 258 compatible = "gianfar"; 259 reg = <0x24000 0x1000>; 260 ranges = <0x0 0x24000 0x1000>; 261 local-mac-address = [ 00 00 00 00 00 00 ]; 262 interrupts = <32 0x8 33 0x8 34 0x8>; 263 phy-connection-type = "mii"; 264 interrupt-parent = <&ipic>; 265 tbi-handle = <&tbi0>; 266 phy-handle = <&phy2>; 267 sleep = <&pmc 0xc0000000>; 268 fsl,magic-packet; 269 270 mdio@520 { 271 #address-cells = <1>; 272 #size-cells = <0>; 273 compatible = "fsl,gianfar-mdio"; 274 reg = <0x520 0x20>; 275 276 phy2: ethernet-phy@2 { 277 interrupt-parent = <&ipic>; 278 interrupts = <17 0x8>; 279 reg = <0x2>; 280 device_type = "ethernet-phy"; 281 }; 282 283 tbi0: tbi-phy@11 { 284 reg = <0x11>; 285 device_type = "tbi-phy"; 286 }; 287 }; 288 }; 289 290 enet1: ethernet@25000 { 291 #address-cells = <1>; 292 #size-cells = <1>; 293 cell-index = <1>; 294 device_type = "network"; 295 model = "eTSEC"; 296 compatible = "gianfar"; 297 reg = <0x25000 0x1000>; 298 ranges = <0x0 0x25000 0x1000>; 299 local-mac-address = [ 00 00 00 00 00 00 ]; 300 interrupts = <35 0x8 36 0x8 37 0x8>; 301 phy-connection-type = "mii"; 302 interrupt-parent = <&ipic>; 303 fixed-link = <1 1 1000 0 0>; 304 tbi-handle = <&tbi1>; 305 sleep = <&pmc 0x30000000>; 306 fsl,magic-packet; 307 308 mdio@520 { 309 #address-cells = <1>; 310 #size-cells = <0>; 311 compatible = "fsl,gianfar-tbi"; 312 reg = <0x520 0x20>; 313 314 tbi1: tbi-phy@11 { 315 reg = <0x11>; 316 device_type = "tbi-phy"; 317 }; 318 }; 319 }; 320 321 serial0: serial@4500 { 322 cell-index = <0>; 323 device_type = "serial"; 324 compatible = "ns16550"; 325 reg = <0x4500 0x100>; 326 clock-frequency = <0>; 327 interrupts = <9 0x8>; 328 interrupt-parent = <&ipic>; 329 }; 330 331 serial1: serial@4600 { 332 cell-index = <1>; 333 device_type = "serial"; 334 compatible = "ns16550"; 335 reg = <0x4600 0x100>; 336 clock-frequency = <0>; 337 interrupts = <10 0x8>; 338 interrupt-parent = <&ipic>; 339 }; 340 341 crypto@30000 { 342 compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", 343 "fsl,sec2.1", "fsl,sec2.0"; 344 reg = <0x30000 0x10000>; 345 interrupts = <11 0x8>; 346 interrupt-parent = <&ipic>; 347 fsl,num-channels = <4>; 348 fsl,channel-fifo-len = <24>; 349 fsl,exec-units-mask = <0x9fe>; 350 fsl,descriptor-types-mask = <0x3ab0ebf>; 351 sleep = <&pmc 0x03000000>; 352 }; 353 354 /* IPIC 355 * interrupts cell = <intr #, sense> 356 * sense values match linux IORESOURCE_IRQ_* defines: 357 * sense == 8: Level, low assertion 358 * sense == 2: Edge, high-to-low change 359 */ 360 ipic: interrupt-controller@700 { 361 compatible = "fsl,ipic"; 362 interrupt-controller; 363 #address-cells = <0>; 364 #interrupt-cells = <2>; 365 reg = <0x700 0x100>; 366 }; 367 368 pmc: power@b00 { 369 compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; 370 reg = <0xb00 0x100 0xa00 0x100>; 371 interrupts = <80 0x8>; 372 interrupt-parent = <&ipic>; 373 }; 374 }; 375 376 pci0: pci@e0008500 { 377 interrupt-map-mask = <0xf800 0 0 7>; 378 interrupt-map = < 379 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ 380 381 /* IDSEL AD14 IRQ6 inta */ 382 0x7000 0x0 0x0 0x1 &ipic 22 0x8 383 384 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ 385 0x7800 0x0 0x0 0x1 &ipic 21 0x8 386 0x7800 0x0 0x0 0x2 &ipic 22 0x8 387 0x7800 0x0 0x0 0x4 &ipic 23 0x8 388 389 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ 390 0xE000 0x0 0x0 0x1 &ipic 23 0x8 391 0xE000 0x0 0x0 0x2 &ipic 21 0x8 392 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; 393 interrupt-parent = <&ipic>; 394 interrupts = <66 0x8>; 395 bus-range = <0 0>; 396 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 397 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 398 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; 399 sleep = <&pmc 0x00010000>; 400 clock-frequency = <66666666>; 401 #interrupt-cells = <1>; 402 #size-cells = <2>; 403 #address-cells = <3>; 404 reg = <0xe0008500 0x100 /* internal registers */ 405 0xe0008300 0x8>; /* config space access registers */ 406 compatible = "fsl,mpc8349-pci"; 407 device_type = "pci"; 408 }; 409 410 pci1: pcie@e0009000 { 411 #address-cells = <3>; 412 #size-cells = <2>; 413 #interrupt-cells = <1>; 414 device_type = "pci"; 415 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; 416 reg = <0xe0009000 0x00001000>; 417 ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 418 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; 419 bus-range = <0 255>; 420 interrupt-map-mask = <0xf800 0 0 7>; 421 interrupt-map = <0 0 0 1 &ipic 1 8 422 0 0 0 2 &ipic 1 8 423 0 0 0 3 &ipic 1 8 424 0 0 0 4 &ipic 1 8>; 425 sleep = <&pmc 0x00300000>; 426 clock-frequency = <0>; 427 428 pcie@0 { 429 #address-cells = <3>; 430 #size-cells = <2>; 431 device_type = "pci"; 432 reg = <0 0 0 0 0>; 433 ranges = <0x02000000 0 0xa8000000 434 0x02000000 0 0xa8000000 435 0 0x10000000 436 0x01000000 0 0x00000000 437 0x01000000 0 0x00000000 438 0 0x00800000>; 439 }; 440 }; 441 442 pci2: pcie@e000a000 { 443 #address-cells = <3>; 444 #size-cells = <2>; 445 #interrupt-cells = <1>; 446 device_type = "pci"; 447 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; 448 reg = <0xe000a000 0x00001000>; 449 ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 450 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; 451 bus-range = <0 255>; 452 interrupt-map-mask = <0xf800 0 0 7>; 453 interrupt-map = <0 0 0 1 &ipic 2 8 454 0 0 0 2 &ipic 2 8 455 0 0 0 3 &ipic 2 8 456 0 0 0 4 &ipic 2 8>; 457 sleep = <&pmc 0x000c0000>; 458 clock-frequency = <0>; 459 460 pcie@0 { 461 #address-cells = <3>; 462 #size-cells = <2>; 463 device_type = "pci"; 464 reg = <0 0 0 0 0>; 465 ranges = <0x02000000 0 0xc8000000 466 0x02000000 0 0xc8000000 467 0 0x10000000 468 0x01000000 0 0x00000000 469 0x01000000 0 0x00000000 470 0 0x00800000>; 471 }; 472 }; 473}; 474