1/*
2 * MPC8378E RDB Device Tree Source
3 *
4 * Copyright 2007, 2008 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	compatible = "fsl,mpc8378rdb";
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		ethernet0 = &enet0;
21		ethernet1 = &enet1;
22		serial0 = &serial0;
23		serial1 = &serial1;
24		pci0 = &pci0;
25		pci1 = &pci1;
26		pci2 = &pci2;
27	};
28
29	cpus {
30		#address-cells = <1>;
31		#size-cells = <0>;
32
33		PowerPC,8378@0 {
34			device_type = "cpu";
35			reg = <0x0>;
36			d-cache-line-size = <32>;
37			i-cache-line-size = <32>;
38			d-cache-size = <32768>;
39			i-cache-size = <32768>;
40			timebase-frequency = <0>;
41			bus-frequency = <0>;
42			clock-frequency = <0>;
43		};
44	};
45
46	memory {
47		device_type = "memory";
48		reg = <0x00000000 0x10000000>;	// 256MB at 0
49	};
50
51	localbus@e0005000 {
52		#address-cells = <2>;
53		#size-cells = <1>;
54		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
55		reg = <0xe0005000 0x1000>;
56		interrupts = <77 0x8>;
57		interrupt-parent = <&ipic>;
58
59		// CS0 and CS1 are swapped when
60		// booting from nand, but the
61		// addresses are the same.
62		ranges = <0x0 0x0 0xfe000000 0x00800000
63		          0x1 0x0 0xe0600000 0x00008000
64		          0x2 0x0 0xf0000000 0x00020000
65		          0x3 0x0 0xfa000000 0x00008000>;
66
67		flash@0,0 {
68			#address-cells = <1>;
69			#size-cells = <1>;
70			compatible = "cfi-flash";
71			reg = <0x0 0x0 0x800000>;
72			bank-width = <2>;
73			device-width = <1>;
74		};
75
76		nand@1,0 {
77			#address-cells = <1>;
78			#size-cells = <1>;
79			compatible = "fsl,mpc8378-fcm-nand",
80			             "fsl,elbc-fcm-nand";
81			reg = <0x1 0x0 0x8000>;
82
83			u-boot@0 {
84				reg = <0x0 0x100000>;
85				read-only;
86			};
87
88			kernel@100000 {
89				reg = <0x100000 0x300000>;
90			};
91			fs@400000 {
92				reg = <0x400000 0x1c00000>;
93			};
94		};
95	};
96
97	immr@e0000000 {
98		#address-cells = <1>;
99		#size-cells = <1>;
100		device_type = "soc";
101		compatible = "simple-bus";
102		ranges = <0x0 0xe0000000 0x00100000>;
103		reg = <0xe0000000 0x00000200>;
104		bus-frequency = <0>;
105
106		wdt@200 {
107			device_type = "watchdog";
108			compatible = "mpc83xx_wdt";
109			reg = <0x200 0x100>;
110		};
111
112		gpio1: gpio-controller@c00 {
113			#gpio-cells = <2>;
114			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
115			reg = <0xc00 0x100>;
116			interrupts = <74 0x8>;
117			interrupt-parent = <&ipic>;
118			gpio-controller;
119		};
120
121		gpio2: gpio-controller@d00 {
122			#gpio-cells = <2>;
123			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
124			reg = <0xd00 0x100>;
125			interrupts = <75 0x8>;
126			interrupt-parent = <&ipic>;
127			gpio-controller;
128		};
129
130		sleep-nexus {
131			#address-cells = <1>;
132			#size-cells = <1>;
133			compatible = "simple-bus";
134			sleep = <&pmc 0x0c000000>;
135			ranges;
136
137			i2c@3000 {
138				#address-cells = <1>;
139				#size-cells = <0>;
140				cell-index = <0>;
141				compatible = "fsl-i2c";
142				reg = <0x3000 0x100>;
143				interrupts = <14 0x8>;
144				interrupt-parent = <&ipic>;
145				dfsrr;
146
147				dtt@48 {
148					compatible = "national,lm75";
149					reg = <0x48>;
150				};
151
152				at24@50 {
153					compatible = "at24,24c256";
154					reg = <0x50>;
155				};
156
157				rtc@68 {
158					compatible = "dallas,ds1339";
159					reg = <0x68>;
160				};
161
162				mcu_pio: mcu@a {
163					#gpio-cells = <2>;
164					compatible = "fsl,mc9s08qg8-mpc8378erdb",
165						     "fsl,mcu-mpc8349emitx";
166					reg = <0x0a>;
167					gpio-controller;
168				};
169			};
170
171			sdhci@2e000 {
172				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
173				reg = <0x2e000 0x1000>;
174				interrupts = <42 0x8>;
175				interrupt-parent = <&ipic>;
176				sdhci,wp-inverted;
177				/* Filled in by U-Boot */
178				clock-frequency = <111111111>;
179			};
180		};
181
182		i2c@3100 {
183			#address-cells = <1>;
184			#size-cells = <0>;
185			cell-index = <1>;
186			compatible = "fsl-i2c";
187			reg = <0x3100 0x100>;
188			interrupts = <15 0x8>;
189			interrupt-parent = <&ipic>;
190			dfsrr;
191		};
192
193		spi@7000 {
194			cell-index = <0>;
195			compatible = "fsl,spi";
196			reg = <0x7000 0x1000>;
197			interrupts = <16 0x8>;
198			interrupt-parent = <&ipic>;
199			mode = "cpu";
200		};
201
202		dma@82a8 {
203			#address-cells = <1>;
204			#size-cells = <1>;
205			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
206			reg = <0x82a8 4>;
207			ranges = <0 0x8100 0x1a8>;
208			interrupt-parent = <&ipic>;
209			interrupts = <71 8>;
210			cell-index = <0>;
211			dma-channel@0 {
212				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
213				reg = <0 0x80>;
214				cell-index = <0>;
215				interrupt-parent = <&ipic>;
216				interrupts = <71 8>;
217			};
218			dma-channel@80 {
219				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
220				reg = <0x80 0x80>;
221				cell-index = <1>;
222				interrupt-parent = <&ipic>;
223				interrupts = <71 8>;
224			};
225			dma-channel@100 {
226				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
227				reg = <0x100 0x80>;
228				cell-index = <2>;
229				interrupt-parent = <&ipic>;
230				interrupts = <71 8>;
231			};
232			dma-channel@180 {
233				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
234				reg = <0x180 0x28>;
235				cell-index = <3>;
236				interrupt-parent = <&ipic>;
237				interrupts = <71 8>;
238			};
239		};
240
241		usb@23000 {
242			compatible = "fsl-usb2-dr";
243			reg = <0x23000 0x1000>;
244			#address-cells = <1>;
245			#size-cells = <0>;
246			interrupt-parent = <&ipic>;
247			interrupts = <38 0x8>;
248			phy_type = "ulpi";
249			sleep = <&pmc 0x00c00000>;
250		};
251
252		enet0: ethernet@24000 {
253			#address-cells = <1>;
254			#size-cells = <1>;
255			cell-index = <0>;
256			device_type = "network";
257			model = "eTSEC";
258			compatible = "gianfar";
259			reg = <0x24000 0x1000>;
260			ranges = <0x0 0x24000 0x1000>;
261			local-mac-address = [ 00 00 00 00 00 00 ];
262			interrupts = <32 0x8 33 0x8 34 0x8>;
263			phy-connection-type = "mii";
264			interrupt-parent = <&ipic>;
265			tbi-handle = <&tbi0>;
266			phy-handle = <&phy2>;
267			sleep = <&pmc 0xc0000000>;
268			fsl,magic-packet;
269
270			mdio@520 {
271				#address-cells = <1>;
272				#size-cells = <0>;
273				compatible = "fsl,gianfar-mdio";
274				reg = <0x520 0x20>;
275
276				phy2: ethernet-phy@2 {
277					interrupt-parent = <&ipic>;
278					interrupts = <17 0x8>;
279					reg = <0x2>;
280					device_type = "ethernet-phy";
281				};
282
283				tbi0: tbi-phy@11 {
284					reg = <0x11>;
285					device_type = "tbi-phy";
286				};
287			};
288		};
289
290		enet1: ethernet@25000 {
291			#address-cells = <1>;
292			#size-cells = <1>;
293			cell-index = <1>;
294			device_type = "network";
295			model = "eTSEC";
296			compatible = "gianfar";
297			reg = <0x25000 0x1000>;
298			ranges = <0x0 0x25000 0x1000>;
299			local-mac-address = [ 00 00 00 00 00 00 ];
300			interrupts = <35 0x8 36 0x8 37 0x8>;
301			phy-connection-type = "mii";
302			interrupt-parent = <&ipic>;
303			fixed-link = <1 1 1000 0 0>;
304			tbi-handle = <&tbi1>;
305			sleep = <&pmc 0x30000000>;
306			fsl,magic-packet;
307
308			mdio@520 {
309				#address-cells = <1>;
310				#size-cells = <0>;
311				compatible = "fsl,gianfar-tbi";
312				reg = <0x520 0x20>;
313
314				tbi1: tbi-phy@11 {
315					reg = <0x11>;
316					device_type = "tbi-phy";
317				};
318			};
319		};
320
321		serial0: serial@4500 {
322			cell-index = <0>;
323			device_type = "serial";
324			compatible = "fsl,ns16550", "ns16550";
325			reg = <0x4500 0x100>;
326			clock-frequency = <0>;
327			interrupts = <9 0x8>;
328			interrupt-parent = <&ipic>;
329		};
330
331		serial1: serial@4600 {
332			cell-index = <1>;
333			device_type = "serial";
334			compatible = "fsl,ns16550", "ns16550";
335			reg = <0x4600 0x100>;
336			clock-frequency = <0>;
337			interrupts = <10 0x8>;
338			interrupt-parent = <&ipic>;
339		};
340
341		crypto@30000 {
342			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
343				     "fsl,sec2.1", "fsl,sec2.0";
344			reg = <0x30000 0x10000>;
345			interrupts = <11 0x8>;
346			interrupt-parent = <&ipic>;
347			fsl,num-channels = <4>;
348			fsl,channel-fifo-len = <24>;
349			fsl,exec-units-mask = <0x9fe>;
350			fsl,descriptor-types-mask = <0x3ab0ebf>;
351			sleep = <&pmc 0x03000000>;
352		};
353
354		/* IPIC
355		 * interrupts cell = <intr #, sense>
356		 * sense values match linux IORESOURCE_IRQ_* defines:
357		 * sense == 8: Level, low assertion
358		 * sense == 2: Edge, high-to-low change
359		 */
360		ipic: interrupt-controller@700 {
361			compatible = "fsl,ipic";
362			interrupt-controller;
363			#address-cells = <0>;
364			#interrupt-cells = <2>;
365			reg = <0x700 0x100>;
366		};
367
368		pmc: power@b00 {
369			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
370			reg = <0xb00 0x100 0xa00 0x100>;
371			interrupts = <80 0x8>;
372			interrupt-parent = <&ipic>;
373		};
374	};
375
376	pci0: pci@e0008500 {
377		interrupt-map-mask = <0xf800 0 0 7>;
378		interrupt-map = <
379				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
380
381				/* IDSEL AD14 IRQ6 inta */
382				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
383
384				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
385				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
386				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
387				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
388
389				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
390				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
391				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
392				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
393		interrupt-parent = <&ipic>;
394		interrupts = <66 0x8>;
395		bus-range = <0 0>;
396		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
397		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
398		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
399		sleep = <&pmc 0x00010000>;
400		clock-frequency = <66666666>;
401		#interrupt-cells = <1>;
402		#size-cells = <2>;
403		#address-cells = <3>;
404		reg = <0xe0008500 0x100		/* internal registers */
405		       0xe0008300 0x8>;		/* config space access registers */
406		compatible = "fsl,mpc8349-pci";
407		device_type = "pci";
408	};
409
410	pci1: pcie@e0009000 {
411		#address-cells = <3>;
412		#size-cells = <2>;
413		#interrupt-cells = <1>;
414		device_type = "pci";
415		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
416		reg = <0xe0009000 0x00001000>;
417		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
418		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
419		bus-range = <0 255>;
420		interrupt-map-mask = <0xf800 0 0 7>;
421		interrupt-map = <0 0 0 1 &ipic 1 8
422				 0 0 0 2 &ipic 1 8
423				 0 0 0 3 &ipic 1 8
424				 0 0 0 4 &ipic 1 8>;
425		sleep = <&pmc 0x00300000>;
426		clock-frequency = <0>;
427
428		pcie@0 {
429			#address-cells = <3>;
430			#size-cells = <2>;
431			device_type = "pci";
432			reg = <0 0 0 0 0>;
433			ranges = <0x02000000 0 0xa8000000
434				  0x02000000 0 0xa8000000
435				  0 0x10000000
436				  0x01000000 0 0x00000000
437				  0x01000000 0 0x00000000
438				  0 0x00800000>;
439		};
440	};
441
442	pci2: pcie@e000a000 {
443		#address-cells = <3>;
444		#size-cells = <2>;
445		#interrupt-cells = <1>;
446		device_type = "pci";
447		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
448		reg = <0xe000a000 0x00001000>;
449		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
450			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
451		bus-range = <0 255>;
452		interrupt-map-mask = <0xf800 0 0 7>;
453		interrupt-map = <0 0 0 1 &ipic 2 8
454				 0 0 0 2 &ipic 2 8
455				 0 0 0 3 &ipic 2 8
456				 0 0 0 4 &ipic 2 8>;
457		sleep = <&pmc 0x000c0000>;
458		clock-frequency = <0>;
459
460		pcie@0 {
461			#address-cells = <3>;
462			#size-cells = <2>;
463			device_type = "pci";
464			reg = <0 0 0 0 0>;
465			ranges = <0x02000000 0 0xc8000000
466				  0x02000000 0 0xc8000000
467				  0 0x10000000
468				  0x01000000 0 0x00000000
469				  0x01000000 0 0x00000000
470				  0 0x00800000>;
471		};
472	};
473
474	leds {
475		compatible = "gpio-leds";
476
477		pwr {
478			gpios = <&mcu_pio 0 0>;
479			default-state = "on";
480		};
481
482		hdd {
483			gpios = <&mcu_pio 1 0>;
484			linux,default-trigger = "ide-disk";
485		};
486	};
487};
488