1/*
2 * MPC8378E RDB Device Tree Source
3 *
4 * Copyright 2007, 2008 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	compatible = "fsl,mpc8378rdb";
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		ethernet0 = &enet0;
21		ethernet1 = &enet1;
22		serial0 = &serial0;
23		serial1 = &serial1;
24		pci0 = &pci0;
25		pci1 = &pci1;
26		pci2 = &pci2;
27	};
28
29	cpus {
30		#address-cells = <1>;
31		#size-cells = <0>;
32
33		PowerPC,8378@0 {
34			device_type = "cpu";
35			reg = <0x0>;
36			d-cache-line-size = <32>;
37			i-cache-line-size = <32>;
38			d-cache-size = <32768>;
39			i-cache-size = <32768>;
40			timebase-frequency = <0>;
41			bus-frequency = <0>;
42			clock-frequency = <0>;
43		};
44	};
45
46	memory {
47		device_type = "memory";
48		reg = <0x00000000 0x10000000>;	// 256MB at 0
49	};
50
51	localbus@e0005000 {
52		#address-cells = <2>;
53		#size-cells = <1>;
54		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
55		reg = <0xe0005000 0x1000>;
56		interrupts = <77 0x8>;
57		interrupt-parent = <&ipic>;
58
59		// CS0 and CS1 are swapped when
60		// booting from nand, but the
61		// addresses are the same.
62		ranges = <0x0 0x0 0xfe000000 0x00800000
63		          0x1 0x0 0xe0600000 0x00008000
64		          0x2 0x0 0xf0000000 0x00020000
65		          0x3 0x0 0xfa000000 0x00008000>;
66
67		flash@0,0 {
68			#address-cells = <1>;
69			#size-cells = <1>;
70			compatible = "cfi-flash";
71			reg = <0x0 0x0 0x800000>;
72			bank-width = <2>;
73			device-width = <1>;
74		};
75
76		nand@1,0 {
77			#address-cells = <1>;
78			#size-cells = <1>;
79			compatible = "fsl,mpc8378-fcm-nand",
80			             "fsl,elbc-fcm-nand";
81			reg = <0x1 0x0 0x8000>;
82
83			u-boot@0 {
84				reg = <0x0 0x100000>;
85				read-only;
86			};
87
88			kernel@100000 {
89				reg = <0x100000 0x300000>;
90			};
91			fs@400000 {
92				reg = <0x400000 0x1c00000>;
93			};
94		};
95	};
96
97	immr@e0000000 {
98		#address-cells = <1>;
99		#size-cells = <1>;
100		device_type = "soc";
101		compatible = "simple-bus";
102		ranges = <0x0 0xe0000000 0x00100000>;
103		reg = <0xe0000000 0x00000200>;
104		bus-frequency = <0>;
105
106		wdt@200 {
107			device_type = "watchdog";
108			compatible = "mpc83xx_wdt";
109			reg = <0x200 0x100>;
110		};
111
112		gpio1: gpio-controller@c00 {
113			#gpio-cells = <2>;
114			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
115			reg = <0xc00 0x100>;
116			interrupts = <74 0x8>;
117			interrupt-parent = <&ipic>;
118			gpio-controller;
119		};
120
121		gpio2: gpio-controller@d00 {
122			#gpio-cells = <2>;
123			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
124			reg = <0xd00 0x100>;
125			interrupts = <75 0x8>;
126			interrupt-parent = <&ipic>;
127			gpio-controller;
128		};
129
130		sleep-nexus {
131			#address-cells = <1>;
132			#size-cells = <1>;
133			compatible = "simple-bus";
134			sleep = <&pmc 0x0c000000>;
135			ranges;
136
137			i2c@3000 {
138				#address-cells = <1>;
139				#size-cells = <0>;
140				cell-index = <0>;
141				compatible = "fsl-i2c";
142				reg = <0x3000 0x100>;
143				interrupts = <14 0x8>;
144				interrupt-parent = <&ipic>;
145				dfsrr;
146
147				dtt@48 {
148					compatible = "national,lm75";
149					reg = <0x48>;
150				};
151
152				at24@50 {
153					compatible = "atmel,24c256";
154					reg = <0x50>;
155				};
156
157				rtc@68 {
158					compatible = "dallas,ds1339";
159					reg = <0x68>;
160				};
161
162				mcu_pio: mcu@a {
163					#gpio-cells = <2>;
164					compatible = "fsl,mc9s08qg8-mpc8378erdb",
165						     "fsl,mcu-mpc8349emitx";
166					reg = <0x0a>;
167					gpio-controller;
168				};
169			};
170
171			sdhci@2e000 {
172				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
173				reg = <0x2e000 0x1000>;
174				interrupts = <42 0x8>;
175				interrupt-parent = <&ipic>;
176				sdhci,wp-inverted;
177				/* Filled in by U-Boot */
178				clock-frequency = <111111111>;
179			};
180		};
181
182		i2c@3100 {
183			#address-cells = <1>;
184			#size-cells = <0>;
185			cell-index = <1>;
186			compatible = "fsl-i2c";
187			reg = <0x3100 0x100>;
188			interrupts = <15 0x8>;
189			interrupt-parent = <&ipic>;
190			dfsrr;
191		};
192
193		spi@7000 {
194			cell-index = <0>;
195			compatible = "fsl,spi";
196			reg = <0x7000 0x1000>;
197			interrupts = <16 0x8>;
198			interrupt-parent = <&ipic>;
199			mode = "cpu";
200		};
201
202		dma@82a8 {
203			#address-cells = <1>;
204			#size-cells = <1>;
205			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
206			reg = <0x82a8 4>;
207			ranges = <0 0x8100 0x1a8>;
208			interrupt-parent = <&ipic>;
209			interrupts = <71 8>;
210			cell-index = <0>;
211			dma-channel@0 {
212				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
213				reg = <0 0x80>;
214				cell-index = <0>;
215				interrupt-parent = <&ipic>;
216				interrupts = <71 8>;
217			};
218			dma-channel@80 {
219				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
220				reg = <0x80 0x80>;
221				cell-index = <1>;
222				interrupt-parent = <&ipic>;
223				interrupts = <71 8>;
224			};
225			dma-channel@100 {
226				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
227				reg = <0x100 0x80>;
228				cell-index = <2>;
229				interrupt-parent = <&ipic>;
230				interrupts = <71 8>;
231			};
232			dma-channel@180 {
233				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
234				reg = <0x180 0x28>;
235				cell-index = <3>;
236				interrupt-parent = <&ipic>;
237				interrupts = <71 8>;
238			};
239		};
240
241		usb@23000 {
242			compatible = "fsl-usb2-dr";
243			reg = <0x23000 0x1000>;
244			#address-cells = <1>;
245			#size-cells = <0>;
246			interrupt-parent = <&ipic>;
247			interrupts = <38 0x8>;
248			phy_type = "ulpi";
249			sleep = <&pmc 0x00c00000>;
250		};
251
252		enet0: ethernet@24000 {
253			#address-cells = <1>;
254			#size-cells = <1>;
255			cell-index = <0>;
256			device_type = "network";
257			model = "eTSEC";
258			compatible = "gianfar";
259			reg = <0x24000 0x1000>;
260			ranges = <0x0 0x24000 0x1000>;
261			local-mac-address = [ 00 00 00 00 00 00 ];
262			interrupts = <32 0x8 33 0x8 34 0x8>;
263			phy-connection-type = "mii";
264			interrupt-parent = <&ipic>;
265			tbi-handle = <&tbi0>;
266			phy-handle = <&phy2>;
267			sleep = <&pmc 0xc0000000>;
268			fsl,magic-packet;
269
270			mdio@520 {
271				#address-cells = <1>;
272				#size-cells = <0>;
273				compatible = "fsl,gianfar-mdio";
274				reg = <0x520 0x20>;
275
276				phy2: ethernet-phy@2 {
277					interrupt-parent = <&ipic>;
278					interrupts = <17 0x8>;
279					reg = <0x2>;
280				};
281
282				tbi0: tbi-phy@11 {
283					reg = <0x11>;
284					device_type = "tbi-phy";
285				};
286			};
287		};
288
289		enet1: ethernet@25000 {
290			#address-cells = <1>;
291			#size-cells = <1>;
292			cell-index = <1>;
293			device_type = "network";
294			model = "eTSEC";
295			compatible = "gianfar";
296			reg = <0x25000 0x1000>;
297			ranges = <0x0 0x25000 0x1000>;
298			local-mac-address = [ 00 00 00 00 00 00 ];
299			interrupts = <35 0x8 36 0x8 37 0x8>;
300			phy-connection-type = "mii";
301			interrupt-parent = <&ipic>;
302			fixed-link = <1 1 1000 0 0>;
303			tbi-handle = <&tbi1>;
304			sleep = <&pmc 0x30000000>;
305			fsl,magic-packet;
306
307			mdio@520 {
308				#address-cells = <1>;
309				#size-cells = <0>;
310				compatible = "fsl,gianfar-tbi";
311				reg = <0x520 0x20>;
312
313				tbi1: tbi-phy@11 {
314					reg = <0x11>;
315					device_type = "tbi-phy";
316				};
317			};
318		};
319
320		serial0: serial@4500 {
321			cell-index = <0>;
322			device_type = "serial";
323			compatible = "fsl,ns16550", "ns16550";
324			reg = <0x4500 0x100>;
325			clock-frequency = <0>;
326			interrupts = <9 0x8>;
327			interrupt-parent = <&ipic>;
328		};
329
330		serial1: serial@4600 {
331			cell-index = <1>;
332			device_type = "serial";
333			compatible = "fsl,ns16550", "ns16550";
334			reg = <0x4600 0x100>;
335			clock-frequency = <0>;
336			interrupts = <10 0x8>;
337			interrupt-parent = <&ipic>;
338		};
339
340		crypto@30000 {
341			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
342				     "fsl,sec2.1", "fsl,sec2.0";
343			reg = <0x30000 0x10000>;
344			interrupts = <11 0x8>;
345			interrupt-parent = <&ipic>;
346			fsl,num-channels = <4>;
347			fsl,channel-fifo-len = <24>;
348			fsl,exec-units-mask = <0x9fe>;
349			fsl,descriptor-types-mask = <0x3ab0ebf>;
350			sleep = <&pmc 0x03000000>;
351		};
352
353		/* IPIC
354		 * interrupts cell = <intr #, sense>
355		 * sense values match linux IORESOURCE_IRQ_* defines:
356		 * sense == 8: Level, low assertion
357		 * sense == 2: Edge, high-to-low change
358		 */
359		ipic: interrupt-controller@700 {
360			compatible = "fsl,ipic";
361			interrupt-controller;
362			#address-cells = <0>;
363			#interrupt-cells = <2>;
364			reg = <0x700 0x100>;
365		};
366
367		pmc: power@b00 {
368			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
369			reg = <0xb00 0x100 0xa00 0x100>;
370			interrupts = <80 0x8>;
371			interrupt-parent = <&ipic>;
372		};
373	};
374
375	pci0: pci@e0008500 {
376		interrupt-map-mask = <0xf800 0 0 7>;
377		interrupt-map = <
378				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
379
380				/* IDSEL AD14 IRQ6 inta */
381				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
382
383				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
384				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
385				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
386				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
387
388				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
389				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
390				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
391				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
392		interrupt-parent = <&ipic>;
393		interrupts = <66 0x8>;
394		bus-range = <0 0>;
395		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
396		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
397		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
398		sleep = <&pmc 0x00010000>;
399		clock-frequency = <66666666>;
400		#interrupt-cells = <1>;
401		#size-cells = <2>;
402		#address-cells = <3>;
403		reg = <0xe0008500 0x100		/* internal registers */
404		       0xe0008300 0x8>;		/* config space access registers */
405		compatible = "fsl,mpc8349-pci";
406		device_type = "pci";
407	};
408
409	pci1: pcie@e0009000 {
410		#address-cells = <3>;
411		#size-cells = <2>;
412		#interrupt-cells = <1>;
413		device_type = "pci";
414		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
415		reg = <0xe0009000 0x00001000>;
416		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
417		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
418		bus-range = <0 255>;
419		interrupt-map-mask = <0xf800 0 0 7>;
420		interrupt-map = <0 0 0 1 &ipic 1 8
421				 0 0 0 2 &ipic 1 8
422				 0 0 0 3 &ipic 1 8
423				 0 0 0 4 &ipic 1 8>;
424		sleep = <&pmc 0x00300000>;
425		clock-frequency = <0>;
426
427		pcie@0 {
428			#address-cells = <3>;
429			#size-cells = <2>;
430			device_type = "pci";
431			reg = <0 0 0 0 0>;
432			ranges = <0x02000000 0 0xa8000000
433				  0x02000000 0 0xa8000000
434				  0 0x10000000
435				  0x01000000 0 0x00000000
436				  0x01000000 0 0x00000000
437				  0 0x00800000>;
438		};
439	};
440
441	pci2: pcie@e000a000 {
442		#address-cells = <3>;
443		#size-cells = <2>;
444		#interrupt-cells = <1>;
445		device_type = "pci";
446		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
447		reg = <0xe000a000 0x00001000>;
448		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
449			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
450		bus-range = <0 255>;
451		interrupt-map-mask = <0xf800 0 0 7>;
452		interrupt-map = <0 0 0 1 &ipic 2 8
453				 0 0 0 2 &ipic 2 8
454				 0 0 0 3 &ipic 2 8
455				 0 0 0 4 &ipic 2 8>;
456		sleep = <&pmc 0x000c0000>;
457		clock-frequency = <0>;
458
459		pcie@0 {
460			#address-cells = <3>;
461			#size-cells = <2>;
462			device_type = "pci";
463			reg = <0 0 0 0 0>;
464			ranges = <0x02000000 0 0xc8000000
465				  0x02000000 0 0xc8000000
466				  0 0x10000000
467				  0x01000000 0 0x00000000
468				  0x01000000 0 0x00000000
469				  0 0x00800000>;
470		};
471	};
472
473	leds {
474		compatible = "gpio-leds";
475
476		pwr {
477			gpios = <&mcu_pio 0 0>;
478			default-state = "on";
479		};
480
481		hdd {
482			gpios = <&mcu_pio 1 0>;
483			linux,default-trigger = "disk-activity";
484		};
485	};
486};
487