1/*
2 * MPC8377E RDB Device Tree Source
3 *
4 * Copyright 2007, 2008 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	compatible = "fsl,mpc8377rdb";
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		ethernet0 = &enet0;
21		ethernet1 = &enet1;
22		serial0 = &serial0;
23		serial1 = &serial1;
24		pci0 = &pci0;
25	};
26
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		PowerPC,8377@0 {
32			device_type = "cpu";
33			reg = <0x0>;
34			d-cache-line-size = <32>;
35			i-cache-line-size = <32>;
36			d-cache-size = <32768>;
37			i-cache-size = <32768>;
38			timebase-frequency = <0>;
39			bus-frequency = <0>;
40			clock-frequency = <0>;
41		};
42	};
43
44	memory {
45		device_type = "memory";
46		reg = <0x00000000 0x10000000>;	// 256MB at 0
47	};
48
49	localbus@e0005000 {
50		#address-cells = <2>;
51		#size-cells = <1>;
52		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
53		reg = <0xe0005000 0x1000>;
54		interrupts = <77 0x8>;
55		interrupt-parent = <&ipic>;
56
57		// CS0 and CS1 are swapped when
58		// booting from nand, but the
59		// addresses are the same.
60		ranges = <0x0 0x0 0xfe000000 0x00800000
61		          0x1 0x0 0xe0600000 0x00008000
62		          0x2 0x0 0xf0000000 0x00020000
63		          0x3 0x0 0xfa000000 0x00008000>;
64
65		flash@0,0 {
66			#address-cells = <1>;
67			#size-cells = <1>;
68			compatible = "cfi-flash";
69			reg = <0x0 0x0 0x800000>;
70			bank-width = <2>;
71			device-width = <1>;
72		};
73
74		nand@1,0 {
75			#address-cells = <1>;
76			#size-cells = <1>;
77			compatible = "fsl,mpc8377-fcm-nand",
78			             "fsl,elbc-fcm-nand";
79			reg = <0x1 0x0 0x8000>;
80
81			u-boot@0 {
82				reg = <0x0 0x100000>;
83				read-only;
84			};
85
86			kernel@100000 {
87				reg = <0x100000 0x300000>;
88			};
89			fs@400000 {
90				reg = <0x400000 0x1c00000>;
91			};
92		};
93	};
94
95	immr@e0000000 {
96		#address-cells = <1>;
97		#size-cells = <1>;
98		device_type = "soc";
99		compatible = "simple-bus";
100		ranges = <0x0 0xe0000000 0x00100000>;
101		reg = <0xe0000000 0x00000200>;
102		bus-frequency = <0>;
103
104		wdt@200 {
105			device_type = "watchdog";
106			compatible = "mpc83xx_wdt";
107			reg = <0x200 0x100>;
108		};
109
110		i2c@3000 {
111			#address-cells = <1>;
112			#size-cells = <0>;
113			cell-index = <0>;
114			compatible = "fsl-i2c";
115			reg = <0x3000 0x100>;
116			interrupts = <14 0x8>;
117			interrupt-parent = <&ipic>;
118			dfsrr;
119			rtc@68 {
120				device_type = "rtc";
121				compatible = "dallas,ds1339";
122				reg = <0x68>;
123			};
124		};
125
126		i2c@3100 {
127			#address-cells = <1>;
128			#size-cells = <0>;
129			cell-index = <1>;
130			compatible = "fsl-i2c";
131			reg = <0x3100 0x100>;
132			interrupts = <15 0x8>;
133			interrupt-parent = <&ipic>;
134			dfsrr;
135		};
136
137		spi@7000 {
138			cell-index = <0>;
139			compatible = "fsl,spi";
140			reg = <0x7000 0x1000>;
141			interrupts = <16 0x8>;
142			interrupt-parent = <&ipic>;
143			mode = "cpu";
144		};
145
146		dma@82a8 {
147			#address-cells = <1>;
148			#size-cells = <1>;
149			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
150			reg = <0x82a8 4>;
151			ranges = <0 0x8100 0x1a8>;
152			interrupt-parent = <&ipic>;
153			interrupts = <71 8>;
154			cell-index = <0>;
155			dma-channel@0 {
156				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
157				reg = <0 0x80>;
158				cell-index = <0>;
159				interrupt-parent = <&ipic>;
160				interrupts = <71 8>;
161			};
162			dma-channel@80 {
163				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
164				reg = <0x80 0x80>;
165				cell-index = <1>;
166				interrupt-parent = <&ipic>;
167				interrupts = <71 8>;
168			};
169			dma-channel@100 {
170				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
171				reg = <0x100 0x80>;
172				cell-index = <2>;
173				interrupt-parent = <&ipic>;
174				interrupts = <71 8>;
175			};
176			dma-channel@180 {
177				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
178				reg = <0x180 0x28>;
179				cell-index = <3>;
180				interrupt-parent = <&ipic>;
181				interrupts = <71 8>;
182			};
183		};
184
185		usb@23000 {
186			compatible = "fsl-usb2-dr";
187			reg = <0x23000 0x1000>;
188			#address-cells = <1>;
189			#size-cells = <0>;
190			interrupt-parent = <&ipic>;
191			interrupts = <38 0x8>;
192			phy_type = "ulpi";
193		};
194
195		mdio@24520 {
196			#address-cells = <1>;
197			#size-cells = <0>;
198			compatible = "fsl,gianfar-mdio";
199			reg = <0x24520 0x20>;
200			phy2: ethernet-phy@2 {
201				interrupt-parent = <&ipic>;
202				interrupts = <17 0x8>;
203				reg = <0x2>;
204				device_type = "ethernet-phy";
205			};
206		};
207
208		enet0: ethernet@24000 {
209			cell-index = <0>;
210			device_type = "network";
211			model = "eTSEC";
212			compatible = "gianfar";
213			reg = <0x24000 0x1000>;
214			local-mac-address = [ 00 00 00 00 00 00 ];
215			interrupts = <32 0x8 33 0x8 34 0x8>;
216			phy-connection-type = "mii";
217			interrupt-parent = <&ipic>;
218			phy-handle = <&phy2>;
219		};
220
221		enet1: ethernet@25000 {
222			cell-index = <1>;
223			device_type = "network";
224			model = "eTSEC";
225			compatible = "gianfar";
226			reg = <0x25000 0x1000>;
227			local-mac-address = [ 00 00 00 00 00 00 ];
228			interrupts = <35 0x8 36 0x8 37 0x8>;
229			phy-connection-type = "mii";
230			interrupt-parent = <&ipic>;
231			fixed-link = <1 1 1000 0 0>;
232		};
233
234		serial0: serial@4500 {
235			cell-index = <0>;
236			device_type = "serial";
237			compatible = "ns16550";
238			reg = <0x4500 0x100>;
239			clock-frequency = <0>;
240			interrupts = <9 0x8>;
241			interrupt-parent = <&ipic>;
242		};
243
244		serial1: serial@4600 {
245			cell-index = <1>;
246			device_type = "serial";
247			compatible = "ns16550";
248			reg = <0x4600 0x100>;
249			clock-frequency = <0>;
250			interrupts = <10 0x8>;
251			interrupt-parent = <&ipic>;
252		};
253
254		crypto@30000 {
255			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
256				     "fsl,sec2.1", "fsl,sec2.0";
257			reg = <0x30000 0x10000>;
258			interrupts = <11 0x8>;
259			interrupt-parent = <&ipic>;
260			fsl,num-channels = <4>;
261			fsl,channel-fifo-len = <24>;
262			fsl,exec-units-mask = <0x9fe>;
263			fsl,descriptor-types-mask = <0x3ab0ebf>;
264		};
265
266		sata@18000 {
267			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
268			reg = <0x18000 0x1000>;
269			interrupts = <44 0x8>;
270			interrupt-parent = <&ipic>;
271		};
272
273		sata@19000 {
274			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
275			reg = <0x19000 0x1000>;
276			interrupts = <45 0x8>;
277			interrupt-parent = <&ipic>;
278		};
279
280		/* IPIC
281		 * interrupts cell = <intr #, sense>
282		 * sense values match linux IORESOURCE_IRQ_* defines:
283		 * sense == 8: Level, low assertion
284		 * sense == 2: Edge, high-to-low change
285		 */
286		ipic: interrupt-controller@700 {
287			compatible = "fsl,ipic";
288			interrupt-controller;
289			#address-cells = <0>;
290			#interrupt-cells = <2>;
291			reg = <0x700 0x100>;
292		};
293	};
294
295	pci0: pci@e0008500 {
296		interrupt-map-mask = <0xf800 0 0 7>;
297		interrupt-map = <
298				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
299
300				/* IDSEL AD14 IRQ6 inta */
301				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
302
303				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
304				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
305				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
306				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
307
308				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
309				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
310				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
311				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
312		interrupt-parent = <&ipic>;
313		interrupts = <66 0x8>;
314		bus-range = <0 0>;
315		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
316		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
317		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
318		clock-frequency = <66666666>;
319		#interrupt-cells = <1>;
320		#size-cells = <2>;
321		#address-cells = <3>;
322		reg = <0xe0008500 0x100>;
323		compatible = "fsl,mpc8349-pci";
324		device_type = "pci";
325	};
326};
327