1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC832x RDB Device Tree Source
4 *
5 * Copyright 2007 Freescale Semiconductor Inc.
6 */
7
8/dts-v1/;
9
10/ {
11	model = "MPC8323ERDB";
12	compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
13	#address-cells = <1>;
14	#size-cells = <1>;
15
16	aliases {
17		ethernet0 = &enet1;
18		ethernet1 = &enet0;
19		serial0 = &serial0;
20		serial1 = &serial1;
21		pci0 = &pci0;
22	};
23
24	cpus {
25		#address-cells = <1>;
26		#size-cells = <0>;
27
28		PowerPC,8323@0 {
29			device_type = "cpu";
30			reg = <0x0>;
31			d-cache-line-size = <0x20>;	// 32 bytes
32			i-cache-line-size = <0x20>;	// 32 bytes
33			d-cache-size = <16384>;	// L1, 16K
34			i-cache-size = <16384>;	// L1, 16K
35			timebase-frequency = <0>;
36			bus-frequency = <0>;
37			clock-frequency = <0>;
38		};
39	};
40
41	memory {
42		device_type = "memory";
43		reg = <0x00000000 0x04000000>;
44	};
45
46	soc8323@e0000000 {
47		#address-cells = <1>;
48		#size-cells = <1>;
49		device_type = "soc";
50		compatible = "simple-bus";
51		ranges = <0x0 0xe0000000 0x00100000>;
52		reg = <0xe0000000 0x00000200>;
53		bus-frequency = <0>;
54
55		wdt@200 {
56			device_type = "watchdog";
57			compatible = "mpc83xx_wdt";
58			reg = <0x200 0x100>;
59		};
60
61		pmc: power@b00 {
62			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
63			reg = <0xb00 0x100 0xa00 0x100>;
64			interrupts = <80 0x8>;
65			interrupt-parent = <&ipic>;
66		};
67
68		i2c@3000 {
69			#address-cells = <1>;
70			#size-cells = <0>;
71			cell-index = <0>;
72			compatible = "fsl-i2c";
73			reg = <0x3000 0x100>;
74			interrupts = <14 0x8>;
75			interrupt-parent = <&ipic>;
76			dfsrr;
77		};
78
79		serial0: serial@4500 {
80			cell-index = <0>;
81			device_type = "serial";
82			compatible = "fsl,ns16550", "ns16550";
83			reg = <0x4500 0x100>;
84			clock-frequency = <0>;
85			interrupts = <9 0x8>;
86			interrupt-parent = <&ipic>;
87		};
88
89		serial1: serial@4600 {
90			cell-index = <1>;
91			device_type = "serial";
92			compatible = "fsl,ns16550", "ns16550";
93			reg = <0x4600 0x100>;
94			clock-frequency = <0>;
95			interrupts = <10 0x8>;
96			interrupt-parent = <&ipic>;
97		};
98
99		dma@82a8 {
100			#address-cells = <1>;
101			#size-cells = <1>;
102			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
103			reg = <0x82a8 4>;
104			ranges = <0 0x8100 0x1a8>;
105			interrupt-parent = <&ipic>;
106			interrupts = <71 8>;
107			cell-index = <0>;
108			dma-channel@0 {
109				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
110				reg = <0 0x80>;
111				cell-index = <0>;
112				interrupt-parent = <&ipic>;
113				interrupts = <71 8>;
114			};
115			dma-channel@80 {
116				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
117				reg = <0x80 0x80>;
118				cell-index = <1>;
119				interrupt-parent = <&ipic>;
120				interrupts = <71 8>;
121			};
122			dma-channel@100 {
123				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
124				reg = <0x100 0x80>;
125				cell-index = <2>;
126				interrupt-parent = <&ipic>;
127				interrupts = <71 8>;
128			};
129			dma-channel@180 {
130				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
131				reg = <0x180 0x28>;
132				cell-index = <3>;
133				interrupt-parent = <&ipic>;
134				interrupts = <71 8>;
135			};
136		};
137
138		crypto@30000 {
139			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
140			reg = <0x30000 0x10000>;
141			interrupts = <11 0x8>;
142			interrupt-parent = <&ipic>;
143			fsl,num-channels = <1>;
144			fsl,channel-fifo-len = <24>;
145			fsl,exec-units-mask = <0x4c>;
146			fsl,descriptor-types-mask = <0x0122003f>;
147			sleep = <&pmc 0x03000000>;
148		};
149
150		ipic:pic@700 {
151			interrupt-controller;
152			#address-cells = <0>;
153			#interrupt-cells = <2>;
154			reg = <0x700 0x100>;
155			device_type = "ipic";
156		};
157
158		par_io@1400 {
159			#address-cells = <1>;
160			#size-cells = <1>;
161			reg = <0x1400 0x100>;
162			ranges = <3 0x1448 0x18>;
163			compatible = "fsl,mpc8323-qe-pario";
164			device_type = "par_io";
165			num-ports = <7>;
166
167			qe_pio_d: gpio-controller@1448 {
168				#gpio-cells = <2>;
169				compatible = "fsl,mpc8323-qe-pario-bank";
170				reg = <3 0x18>;
171				gpio-controller;
172			};
173
174			ucc2pio:ucc_pin@2 {
175				pio-map = <
176			/* port  pin  dir  open_drain  assignment  has_irq */
177					3  4  3  0  2  0 	/* MDIO */
178					3  5  1  0  2  0 	/* MDC */
179					3 21  2  0  1  0 	/* RX_CLK (CLK16) */
180					3 23  2  0  1  0 	/* TX_CLK (CLK3) */
181					0 18  1  0  1  0 	/* TxD0 */
182					0 19  1  0  1  0 	/* TxD1 */
183					0 20  1  0  1  0 	/* TxD2 */
184					0 21  1  0  1  0 	/* TxD3 */
185					0 22  2  0  1  0 	/* RxD0 */
186					0 23  2  0  1  0 	/* RxD1 */
187					0 24  2  0  1  0 	/* RxD2 */
188					0 25  2  0  1  0 	/* RxD3 */
189					0 26  2  0  1  0 	/* RX_ER */
190					0 27  1  0  1  0 	/* TX_ER */
191					0 28  2  0  1  0 	/* RX_DV */
192					0 29  2  0  1  0 	/* COL */
193					0 30  1  0  1  0 	/* TX_EN */
194					0 31  2  0  1  0>;      /* CRS */
195			};
196			ucc3pio:ucc_pin@3 {
197				pio-map = <
198			/* port  pin  dir  open_drain  assignment  has_irq */
199					0 13  2  0  1  0 	/* RX_CLK (CLK9) */
200					3 24  2  0  1  0 	/* TX_CLK (CLK10) */
201					1  0  1  0  1  0 	/* TxD0 */
202					1  1  1  0  1  0 	/* TxD1 */
203					1  2  1  0  1  0 	/* TxD2 */
204					1  3  1  0  1  0 	/* TxD3 */
205					1  4  2  0  1  0 	/* RxD0 */
206					1  5  2  0  1  0 	/* RxD1 */
207					1  6  2  0  1  0 	/* RxD2 */
208					1  7  2  0  1  0 	/* RxD3 */
209					1  8  2  0  1  0 	/* RX_ER */
210					1  9  1  0  1  0 	/* TX_ER */
211					1 10  2  0  1  0 	/* RX_DV */
212					1 11  2  0  1  0 	/* COL */
213					1 12  1  0  1  0 	/* TX_EN */
214					1 13  2  0  1  0>;      /* CRS */
215			};
216		};
217	};
218
219	qe@e0100000 {
220		#address-cells = <1>;
221		#size-cells = <1>;
222		device_type = "qe";
223		compatible = "fsl,qe";
224		ranges = <0x0 0xe0100000 0x00100000>;
225		reg = <0xe0100000 0x480>;
226		brg-frequency = <0>;
227		bus-frequency = <198000000>;
228		fsl,qe-num-riscs = <1>;
229		fsl,qe-num-snums = <28>;
230
231		muram@10000 {
232 			#address-cells = <1>;
233 			#size-cells = <1>;
234			compatible = "fsl,qe-muram", "fsl,cpm-muram";
235			ranges = <0x0 0x00010000 0x00004000>;
236
237			data-only@0 {
238				compatible = "fsl,qe-muram-data",
239					     "fsl,cpm-muram-data";
240				reg = <0x0 0x4000>;
241			};
242		};
243
244		spi@4c0 {
245			#address-cells = <1>;
246			#size-cells = <0>;
247			cell-index = <0>;
248			compatible = "fsl,spi";
249			reg = <0x4c0 0x40>;
250			interrupts = <2>;
251			interrupt-parent = <&qeic>;
252			cs-gpios = <&qe_pio_d 13 0>;
253			mode = "cpu-qe";
254
255			mmc-slot@0 {
256				compatible = "fsl,mpc8323rdb-mmc-slot",
257					     "mmc-spi-slot";
258				reg = <0>;
259				gpios = <&qe_pio_d 14 1
260					 &qe_pio_d 15 0>;
261				voltage-ranges = <3300 3300>;
262				spi-max-frequency = <50000000>;
263			};
264		};
265
266		spi@500 {
267			cell-index = <1>;
268			compatible = "fsl,spi";
269			reg = <0x500 0x40>;
270			interrupts = <1>;
271			interrupt-parent = <&qeic>;
272			mode = "cpu";
273		};
274
275		enet0: ucc@3000 {
276			device_type = "network";
277			compatible = "ucc_geth";
278			cell-index = <2>;
279			reg = <0x3000 0x200>;
280			interrupts = <33>;
281			interrupt-parent = <&qeic>;
282			local-mac-address = [ 00 00 00 00 00 00 ];
283			rx-clock-name = "clk16";
284			tx-clock-name = "clk3";
285			phy-handle = <&phy00>;
286			pio-handle = <&ucc2pio>;
287		};
288
289		enet1: ucc@2200 {
290			device_type = "network";
291			compatible = "ucc_geth";
292			cell-index = <3>;
293			reg = <0x2200 0x200>;
294			interrupts = <34>;
295			interrupt-parent = <&qeic>;
296			local-mac-address = [ 00 00 00 00 00 00 ];
297			rx-clock-name = "clk9";
298			tx-clock-name = "clk10";
299			phy-handle = <&phy04>;
300			pio-handle = <&ucc3pio>;
301		};
302
303		mdio@3120 {
304			#address-cells = <1>;
305			#size-cells = <0>;
306			reg = <0x3120 0x18>;
307			compatible = "fsl,ucc-mdio";
308
309			phy00:ethernet-phy@0 {
310				reg = <0x0>;
311			};
312			phy04:ethernet-phy@4 {
313				reg = <0x4>;
314			};
315		};
316
317		qeic:interrupt-controller@80 {
318			interrupt-controller;
319			compatible = "fsl,qe-ic";
320			#address-cells = <0>;
321			#interrupt-cells = <1>;
322			reg = <0x80 0x80>;
323			big-endian;
324			interrupts = <32 0x8 33 0x8>; //high:32 low:33
325			interrupt-parent = <&ipic>;
326		};
327	};
328
329	pci0: pci@e0008500 {
330		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
331		interrupt-map = <
332				/* IDSEL 0x10 AD16 (USB) */
333				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
334
335				/* IDSEL 0x11 AD17 (Mini1)*/
336				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
337				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
338				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
339				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
340
341				/* IDSEL 0x12 AD18 (PCI/Mini2) */
342				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
343				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
344				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
345				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
346
347		interrupt-parent = <&ipic>;
348		interrupts = <66 0x8>;
349		bus-range = <0x0 0x0>;
350		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
351			  0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
352			  0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
353		clock-frequency = <0>;
354		#interrupt-cells = <1>;
355		#size-cells = <2>;
356		#address-cells = <3>;
357		reg = <0xe0008500 0x100		/* internal registers */
358		       0xe0008300 0x8>;		/* config space access registers */
359		compatible = "fsl,mpc8349-pci";
360		device_type = "pci";
361		sleep = <&pmc 0x00010000>;
362	};
363};
364