1/*
2 * MPC8315E RDB Device Tree Source
3 *
4 * Copyright 2007 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	compatible = "fsl,mpc8315erdb";
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		ethernet0 = &enet0;
21		ethernet1 = &enet1;
22		serial0 = &serial0;
23		serial1 = &serial1;
24		pci0 = &pci0;
25		pci1 = &pci1;
26		pci2 = &pci2;
27	};
28
29	cpus {
30		#address-cells = <1>;
31		#size-cells = <0>;
32
33		PowerPC,8315@0 {
34			device_type = "cpu";
35			reg = <0x0>;
36			d-cache-line-size = <32>;
37			i-cache-line-size = <32>;
38			d-cache-size = <16384>;
39			i-cache-size = <16384>;
40			timebase-frequency = <0>;	// from bootloader
41			bus-frequency = <0>;		// from bootloader
42			clock-frequency = <0>;		// from bootloader
43		};
44	};
45
46	memory {
47		device_type = "memory";
48		reg = <0x00000000 0x08000000>;	// 128MB at 0
49	};
50
51	localbus@e0005000 {
52		#address-cells = <2>;
53		#size-cells = <1>;
54		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
55		reg = <0xe0005000 0x1000>;
56		interrupts = <77 0x8>;
57		interrupt-parent = <&ipic>;
58
59		// CS0 and CS1 are swapped when
60		// booting from nand, but the
61		// addresses are the same.
62		ranges = <0x0 0x0 0xfe000000 0x00800000
63		          0x1 0x0 0xe0600000 0x00002000
64		          0x2 0x0 0xf0000000 0x00020000
65		          0x3 0x0 0xfa000000 0x00008000>;
66
67		flash@0,0 {
68			#address-cells = <1>;
69			#size-cells = <1>;
70			compatible = "cfi-flash";
71			reg = <0x0 0x0 0x800000>;
72			bank-width = <2>;
73			device-width = <1>;
74		};
75
76		nand@1,0 {
77			#address-cells = <1>;
78			#size-cells = <1>;
79			compatible = "fsl,mpc8315-fcm-nand",
80			             "fsl,elbc-fcm-nand";
81			reg = <0x1 0x0 0x2000>;
82
83			u-boot@0 {
84				reg = <0x0 0x100000>;
85				read-only;
86			};
87
88			kernel@100000 {
89				reg = <0x100000 0x300000>;
90			};
91			fs@400000 {
92				reg = <0x400000 0x1c00000>;
93			};
94		};
95	};
96
97	immr@e0000000 {
98		#address-cells = <1>;
99		#size-cells = <1>;
100		device_type = "soc";
101		compatible = "fsl,mpc8315-immr", "simple-bus";
102		ranges = <0 0xe0000000 0x00100000>;
103		reg = <0xe0000000 0x00000200>;
104		bus-frequency = <0>;
105
106		wdt@200 {
107			device_type = "watchdog";
108			compatible = "mpc83xx_wdt";
109			reg = <0x200 0x100>;
110		};
111
112		i2c@3000 {
113			#address-cells = <1>;
114			#size-cells = <0>;
115			cell-index = <0>;
116			compatible = "fsl-i2c";
117			reg = <0x3000 0x100>;
118			interrupts = <14 0x8>;
119			interrupt-parent = <&ipic>;
120			dfsrr;
121			rtc@68 {
122				compatible = "dallas,ds1339";
123				reg = <0x68>;
124			};
125
126			mcu_pio: mcu@a {
127				#gpio-cells = <2>;
128				compatible = "fsl,mc9s08qg8-mpc8315erdb",
129					     "fsl,mcu-mpc8349emitx";
130				reg = <0x0a>;
131				gpio-controller;
132			};
133		};
134
135		spi@7000 {
136			cell-index = <0>;
137			compatible = "fsl,spi";
138			reg = <0x7000 0x1000>;
139			interrupts = <16 0x8>;
140			interrupt-parent = <&ipic>;
141			mode = "cpu";
142		};
143
144		dma@82a8 {
145			#address-cells = <1>;
146			#size-cells = <1>;
147			compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
148			reg = <0x82a8 4>;
149			ranges = <0 0x8100 0x1a8>;
150			interrupt-parent = <&ipic>;
151			interrupts = <71 8>;
152			cell-index = <0>;
153			dma-channel@0 {
154				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
155				reg = <0 0x80>;
156				cell-index = <0>;
157				interrupt-parent = <&ipic>;
158				interrupts = <71 8>;
159			};
160			dma-channel@80 {
161				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
162				reg = <0x80 0x80>;
163				cell-index = <1>;
164				interrupt-parent = <&ipic>;
165				interrupts = <71 8>;
166			};
167			dma-channel@100 {
168				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
169				reg = <0x100 0x80>;
170				cell-index = <2>;
171				interrupt-parent = <&ipic>;
172				interrupts = <71 8>;
173			};
174			dma-channel@180 {
175				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
176				reg = <0x180 0x28>;
177				cell-index = <3>;
178				interrupt-parent = <&ipic>;
179				interrupts = <71 8>;
180			};
181		};
182
183		usb@23000 {
184			compatible = "fsl-usb2-dr";
185			reg = <0x23000 0x1000>;
186			#address-cells = <1>;
187			#size-cells = <0>;
188			interrupt-parent = <&ipic>;
189			interrupts = <38 0x8>;
190			phy_type = "utmi";
191		};
192
193		enet0: ethernet@24000 {
194			#address-cells = <1>;
195			#size-cells = <1>;
196			cell-index = <0>;
197			device_type = "network";
198			model = "eTSEC";
199			compatible = "gianfar";
200			reg = <0x24000 0x1000>;
201			ranges = <0x0 0x24000 0x1000>;
202			local-mac-address = [ 00 00 00 00 00 00 ];
203			interrupts = <32 0x8 33 0x8 34 0x8>;
204			interrupt-parent = <&ipic>;
205			tbi-handle = <&tbi0>;
206			phy-handle = < &phy0 >;
207
208			mdio@520 {
209				#address-cells = <1>;
210				#size-cells = <0>;
211				compatible = "fsl,gianfar-mdio";
212				reg = <0x520 0x20>;
213
214				phy0: ethernet-phy@0 {
215					interrupt-parent = <&ipic>;
216					interrupts = <20 0x8>;
217					reg = <0x0>;
218					device_type = "ethernet-phy";
219				};
220
221				phy1: ethernet-phy@1 {
222					interrupt-parent = <&ipic>;
223					interrupts = <19 0x8>;
224					reg = <0x1>;
225					device_type = "ethernet-phy";
226				};
227
228				tbi0: tbi-phy@11 {
229					reg = <0x11>;
230					device_type = "tbi-phy";
231				};
232			};
233		};
234
235		enet1: ethernet@25000 {
236			#address-cells = <1>;
237			#size-cells = <1>;
238			cell-index = <1>;
239			device_type = "network";
240			model = "eTSEC";
241			compatible = "gianfar";
242			reg = <0x25000 0x1000>;
243			ranges = <0x0 0x25000 0x1000>;
244			local-mac-address = [ 00 00 00 00 00 00 ];
245			interrupts = <35 0x8 36 0x8 37 0x8>;
246			interrupt-parent = <&ipic>;
247			tbi-handle = <&tbi1>;
248			phy-handle = < &phy1 >;
249
250			mdio@520 {
251				#address-cells = <1>;
252				#size-cells = <0>;
253				compatible = "fsl,gianfar-tbi";
254				reg = <0x520 0x20>;
255
256				tbi1: tbi-phy@11 {
257					reg = <0x11>;
258					device_type = "tbi-phy";
259				};
260			};
261		};
262
263		serial0: serial@4500 {
264			cell-index = <0>;
265			device_type = "serial";
266			compatible = "ns16550";
267			reg = <0x4500 0x100>;
268			clock-frequency = <133333333>;
269			interrupts = <9 0x8>;
270			interrupt-parent = <&ipic>;
271		};
272
273		serial1: serial@4600 {
274			cell-index = <1>;
275			device_type = "serial";
276			compatible = "ns16550";
277			reg = <0x4600 0x100>;
278			clock-frequency = <133333333>;
279			interrupts = <10 0x8>;
280			interrupt-parent = <&ipic>;
281		};
282
283		crypto@30000 {
284			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
285				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
286				     "fsl,sec2.0";
287			reg = <0x30000 0x10000>;
288			interrupts = <11 0x8>;
289			interrupt-parent = <&ipic>;
290			fsl,num-channels = <4>;
291			fsl,channel-fifo-len = <24>;
292			fsl,exec-units-mask = <0x97c>;
293			fsl,descriptor-types-mask = <0x3ab0abf>;
294		};
295
296		sata@18000 {
297			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
298			reg = <0x18000 0x1000>;
299			cell-index = <1>;
300			interrupts = <44 0x8>;
301			interrupt-parent = <&ipic>;
302		};
303
304		sata@19000 {
305			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
306			reg = <0x19000 0x1000>;
307			cell-index = <2>;
308			interrupts = <45 0x8>;
309			interrupt-parent = <&ipic>;
310		};
311
312		/* IPIC
313		 * interrupts cell = <intr #, sense>
314		 * sense values match linux IORESOURCE_IRQ_* defines:
315		 * sense == 8: Level, low assertion
316		 * sense == 2: Edge, high-to-low change
317		 */
318		ipic: interrupt-controller@700 {
319			interrupt-controller;
320			#address-cells = <0>;
321			#interrupt-cells = <2>;
322			reg = <0x700 0x100>;
323			device_type = "ipic";
324		};
325	};
326
327	pci0: pci@e0008500 {
328		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
329		interrupt-map = <
330				/* IDSEL 0x0E -mini PCI */
331				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
332				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
333				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
334				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
335
336				/* IDSEL 0x0F -mini PCI */
337				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
338				 0x7800 0x0 0x0 0x2 &ipic 17 0x8
339				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
340				 0x7800 0x0 0x0 0x4 &ipic 17 0x8
341
342				/* IDSEL 0x10 - PCI slot */
343				 0x8000 0x0 0x0 0x1 &ipic 48 0x8
344				 0x8000 0x0 0x0 0x2 &ipic 17 0x8
345				 0x8000 0x0 0x0 0x3 &ipic 48 0x8
346				 0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
347		interrupt-parent = <&ipic>;
348		interrupts = <66 0x8>;
349		bus-range = <0x0 0x0>;
350		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
351			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
352			  0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
353		clock-frequency = <66666666>;
354		#interrupt-cells = <1>;
355		#size-cells = <2>;
356		#address-cells = <3>;
357		reg = <0xe0008500 0x100		/* internal registers */
358		       0xe0008300 0x8>;		/* config space access registers */
359		compatible = "fsl,mpc8349-pci";
360		device_type = "pci";
361	};
362
363	pci1: pcie@e0009000 {
364		#address-cells = <3>;
365		#size-cells = <2>;
366		#interrupt-cells = <1>;
367		device_type = "pci";
368		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
369		reg = <0xe0009000 0x00001000>;
370		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
371		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
372		bus-range = <0 255>;
373		interrupt-map-mask = <0xf800 0 0 7>;
374		interrupt-map = <0 0 0 1 &ipic 1 8
375				 0 0 0 2 &ipic 1 8
376				 0 0 0 3 &ipic 1 8
377				 0 0 0 4 &ipic 1 8>;
378		clock-frequency = <0>;
379
380		pcie@0 {
381			#address-cells = <3>;
382			#size-cells = <2>;
383			device_type = "pci";
384			reg = <0 0 0 0 0>;
385			ranges = <0x02000000 0 0xa0000000
386				  0x02000000 0 0xa0000000
387				  0 0x10000000
388				  0x01000000 0 0x00000000
389				  0x01000000 0 0x00000000
390				  0 0x00800000>;
391		};
392	};
393
394	pci2: pcie@e000a000 {
395		#address-cells = <3>;
396		#size-cells = <2>;
397		#interrupt-cells = <1>;
398		device_type = "pci";
399		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
400		reg = <0xe000a000 0x00001000>;
401		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
402			  0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
403		bus-range = <0 255>;
404		interrupt-map-mask = <0xf800 0 0 7>;
405		interrupt-map = <0 0 0 1 &ipic 2 8
406				 0 0 0 2 &ipic 2 8
407				 0 0 0 3 &ipic 2 8
408				 0 0 0 4 &ipic 2 8>;
409		clock-frequency = <0>;
410
411		pcie@0 {
412			#address-cells = <3>;
413			#size-cells = <2>;
414			device_type = "pci";
415			reg = <0 0 0 0 0>;
416			ranges = <0x02000000 0 0xc0000000
417				  0x02000000 0 0xc0000000
418				  0 0x10000000
419				  0x01000000 0 0x00000000
420				  0x01000000 0 0x00000000
421				  0 0x00800000>;
422		};
423	};
424};
425