1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * STx/Freescale ADS5125 MPC5125 silicon
4 *
5 * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
6 *
7 * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
8 * Copyright (C) 2013 Sirius Electronic Systems
9 */
10
11#include <dt-bindings/clock/mpc512x-clock.h>
12
13/dts-v1/;
14
15/ {
16	model = "mpc5125twr"; // In BSP "mpc5125ads"
17	compatible = "fsl,mpc5125ads", "fsl,mpc5125";
18	#address-cells = <1>;
19	#size-cells = <1>;
20	interrupt-parent = <&ipic>;
21
22	aliases {
23		gpio0 = &gpio0;
24		gpio1 = &gpio1;
25		ethernet0 = &eth0;
26	};
27
28	cpus {
29		#address-cells = <1>;
30		#size-cells = <0>;
31
32		PowerPC,5125@0 {
33			device_type = "cpu";
34			reg = <0>;
35			d-cache-line-size = <0x20>;	// 32 bytes
36			i-cache-line-size = <0x20>;	// 32 bytes
37			d-cache-size = <0x8000>;	// L1, 32K
38			i-cache-size = <0x8000>;	// L1, 32K
39			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
40			bus-frequency = <198000000>;	// 198 MHz csb bus
41			clock-frequency = <396000000>;	// 396 MHz ppc core
42		};
43	};
44
45	memory {
46		device_type = "memory";
47		reg = <0x00000000 0x10000000>;	// 256MB at 0
48	};
49
50	sram@30000000 {
51		compatible = "fsl,mpc5121-sram";
52		reg = <0x30000000 0x08000>;		// 32K at 0x30000000
53	};
54
55	clocks {
56		#address-cells = <1>;
57		#size-cells = <0>;
58
59		osc: osc {
60			compatible = "fixed-clock";
61			#clock-cells = <0>;
62			clock-frequency = <33000000>;
63		};
64	};
65
66	soc@80000000 {
67		compatible = "fsl,mpc5121-immr";
68		#address-cells = <1>;
69		#size-cells = <1>;
70		ranges = <0x0 0x80000000 0x400000>;
71		reg = <0x80000000 0x400000>;
72		bus-frequency = <66000000>;	// 66 MHz ips bus
73
74		// IPIC
75		// interrupts cell = <intr #, sense>
76		// sense values match linux IORESOURCE_IRQ_* defines:
77		// sense == 8: Level, low assertion
78		// sense == 2: Edge, high-to-low change
79		//
80		ipic: interrupt-controller@c00 {
81			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
82			interrupt-controller;
83			#address-cells = <0>;
84			#interrupt-cells = <2>;
85			reg = <0xc00 0x100>;
86		};
87
88		rtc@a00 {	// Real time clock
89			compatible = "fsl,mpc5121-rtc";
90			reg = <0xa00 0x100>;
91			interrupts = <79 0x8 80 0x8>;
92		};
93
94		reset@e00 {	// Reset module
95			compatible = "fsl,mpc5125-reset";
96			reg = <0xe00 0x100>;
97		};
98
99		clks: clock@f00 {	// Clock control
100			compatible = "fsl,mpc5121-clock";
101			reg = <0xf00 0x100>;
102			#clock-cells = <1>;
103			clocks = <&osc>;
104			clock-names = "osc";
105		};
106
107		pmc@1000{  // Power Management Controller
108			compatible = "fsl,mpc5121-pmc";
109			reg = <0x1000 0x100>;
110			interrupts = <83 0x2>;
111		};
112
113		gpio0: gpio@1100 {
114			compatible = "fsl,mpc5125-gpio";
115			reg = <0x1100 0x080>;
116			interrupts = <78 0x8>;
117		};
118
119		gpio1: gpio@1180 {
120			compatible = "fsl,mpc5125-gpio";
121			reg = <0x1180 0x080>;
122			interrupts = <86 0x8>;
123		};
124
125		can@1300 { // CAN rev.2
126			compatible = "fsl,mpc5121-mscan";
127			interrupts = <12 0x8>;
128			reg = <0x1300 0x80>;
129			clocks = <&clks MPC512x_CLK_BDLC>,
130				 <&clks MPC512x_CLK_IPS>,
131				 <&clks MPC512x_CLK_SYS>,
132				 <&clks MPC512x_CLK_REF>,
133				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
134			clock-names = "ipg", "ips", "sys", "ref", "mclk";
135		};
136
137		can@1380 {
138			compatible = "fsl,mpc5121-mscan";
139			interrupts = <13 0x8>;
140			reg = <0x1380 0x80>;
141			clocks = <&clks MPC512x_CLK_BDLC>,
142				 <&clks MPC512x_CLK_IPS>,
143				 <&clks MPC512x_CLK_SYS>,
144				 <&clks MPC512x_CLK_REF>,
145				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
146			clock-names = "ipg", "ips", "sys", "ref", "mclk";
147		};
148
149		sdhc@1500 {
150			compatible = "fsl,mpc5121-sdhc";
151			interrupts = <8 0x8>;
152			reg = <0x1500 0x100>;
153			clocks = <&clks MPC512x_CLK_IPS>,
154				 <&clks MPC512x_CLK_SDHC>;
155			clock-names = "ipg", "per";
156		};
157
158		i2c@1700 {
159			#address-cells = <1>;
160			#size-cells = <0>;
161			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
162			reg = <0x1700 0x20>;
163			interrupts = <0x9 0x8>;
164			clocks = <&clks MPC512x_CLK_I2C>;
165			clock-names = "ipg";
166		};
167
168		i2c@1720 {
169			#address-cells = <1>;
170			#size-cells = <0>;
171			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
172			reg = <0x1720 0x20>;
173			interrupts = <0xa 0x8>;
174			clocks = <&clks MPC512x_CLK_I2C>;
175			clock-names = "ipg";
176		};
177
178		i2c@1740 {
179			#address-cells = <1>;
180			#size-cells = <0>;
181			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
182			reg = <0x1740 0x20>;
183			interrupts = <0xb 0x8>;
184			clocks = <&clks MPC512x_CLK_I2C>;
185			clock-names = "ipg";
186		};
187
188		i2ccontrol@1760 {
189			compatible = "fsl,mpc5121-i2c-ctrl";
190			reg = <0x1760 0x8>;
191		};
192
193		diu@2100 {
194			compatible = "fsl,mpc5121-diu";
195			reg = <0x2100 0x100>;
196			interrupts = <64 0x8>;
197			clocks = <&clks MPC512x_CLK_DIU>;
198			clock-names = "ipg";
199		};
200
201		mdio@2800 {
202			compatible = "fsl,mpc5121-fec-mdio";
203			reg = <0x2800 0x800>;
204			#address-cells = <1>;
205			#size-cells = <0>;
206			phy0: ethernet-phy@0 {
207				reg = <1>;
208			};
209		};
210
211		eth0: ethernet@2800 {
212			compatible = "fsl,mpc5125-fec";
213			reg = <0x2800 0x800>;
214			local-mac-address = [ 00 00 00 00 00 00 ];
215			interrupts = <4 0x8>;
216			phy-handle = < &phy0 >;
217			phy-connection-type = "rmii";
218			clocks = <&clks MPC512x_CLK_FEC>;
219			clock-names = "per";
220		};
221
222		// IO control
223		ioctl@a000 {
224			compatible = "fsl,mpc5125-ioctl";
225			reg = <0xA000 0x1000>;
226		};
227
228		// disable USB1 port
229		// TODO:
230		// correct pinmux config and fix USB3320 ulpi dependency
231		// before re-enabling it
232		usb@3000 {
233			compatible = "fsl,mpc5121-usb2-dr";
234			reg = <0x3000 0x400>;
235			#address-cells = <1>;
236			#size-cells = <0>;
237			interrupts = <43 0x8>;
238			dr_mode = "host";
239			phy_type = "ulpi";
240			clocks = <&clks MPC512x_CLK_USB1>;
241			clock-names = "ipg";
242			status = "disabled";
243		};
244
245		sclpc@10100 {
246			compatible = "fsl,mpc512x-lpbfifo";
247			reg = <0x10100 0x50>;
248			interrupts = <7 0x8>;
249			dmas = <&dma0 26>;
250			dma-names = "rx-tx";
251		};
252
253		// 5125 PSCs are not 52xx or 5121 PSC compatible
254		// PSC1 uart0 aka ttyPSC0
255		serial@11100 {
256			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
257			reg = <0x11100 0x100>;
258			interrupts = <40 0x8>;
259			fsl,rx-fifo-size = <16>;
260			fsl,tx-fifo-size = <16>;
261			clocks = <&clks MPC512x_CLK_PSC1>,
262				 <&clks MPC512x_CLK_PSC1_MCLK>;
263			clock-names = "ipg", "mclk";
264		};
265
266		// PSC9 uart1 aka ttyPSC1
267		serial@11900 {
268			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
269			reg = <0x11900 0x100>;
270			interrupts = <40 0x8>;
271			fsl,rx-fifo-size = <16>;
272			fsl,tx-fifo-size = <16>;
273			clocks = <&clks MPC512x_CLK_PSC9>,
274				 <&clks MPC512x_CLK_PSC9_MCLK>;
275			clock-names = "ipg", "mclk";
276		};
277
278		pscfifo@11f00 {
279			compatible = "fsl,mpc5121-psc-fifo";
280			reg = <0x11f00 0x100>;
281			interrupts = <40 0x8>;
282			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
283			clock-names = "ipg";
284		};
285
286		dma0: dma@14000 {
287			compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
288			reg = <0x14000 0x1800>;
289			interrupts = <65 0x8>;
290			#dma-cells = <1>;
291		};
292	};
293};
294