1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Motion-PRO board Device Tree Source
4 *
5 * Copyright (C) 2007 Semihalf
6 * Marian Balakowicz <m8@semihalf.com>
7 */
8
9/include/ "mpc5200b.dtsi"
10
11&gpt0 { fsl,has-wdt; };
12&gpt6 { // Motion-PRO status LED
13	compatible = "promess,motionpro-led";
14	label = "motionpro-statusled";
15	blink-delay = <100>; // 100 msec
16};
17&gpt7 { // Motion-PRO ready LED
18	compatible = "promess,motionpro-led";
19	label = "motionpro-readyled";
20};
21
22/ {
23	model = "promess,motionpro";
24	compatible = "promess,motionpro";
25
26	soc5200@f0000000 {
27		can@900 {
28			status = "disabled";
29		};
30
31		psc@2000 {		// PSC1
32			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
33		};
34
35		// PSC2 in spi master mode
36		psc@2200 {		// PSC2
37			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
38			cell-index = <1>;
39		};
40
41		psc@2400 {		// PSC3
42			status = "disabled";
43		};
44
45		psc@2600 {		// PSC4
46			status = "disabled";
47		};
48
49		psc@2800 {		// PSC5
50			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
51		};
52
53		psc@2c00 {		// PSC6
54			status = "disabled";
55		};
56
57		ethernet@3000 {
58			phy-handle = <&phy0>;
59		};
60
61		mdio@3000 {
62			phy0: ethernet-phy@2 {
63				reg = <2>;
64			};
65		};
66
67		i2c@3d00 {
68			status = "disabled";
69		};
70
71		i2c@3d40 {
72			rtc@68 {
73				compatible = "dallas,ds1339";
74				reg = <0x68>;
75			};
76		};
77
78		sram@8000 {
79			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
80			reg = <0x8000 0x4000>;
81		};
82	};
83
84	pci@f0000d00 {
85		status = "disabled";
86	};
87
88	localbus {
89		ranges = <0 0 0xff000000 0x01000000
90			  1 0 0x50000000 0x00010000
91			  2 0 0x50010000 0x00010000
92			  3 0 0x50020000 0x00010000>;
93
94		// 8-bit DualPort SRAM on LocalPlus Bus CS1
95		kollmorgen@1,0 {
96			compatible = "promess,motionpro-kollmorgen";
97			reg = <1 0 0x10000>;
98			interrupts = <1 1 0>;
99		};
100
101		// 8-bit board CPLD on LocalPlus Bus CS2
102		cpld@2,0 {
103			compatible = "promess,motionpro-cpld";
104			reg = <2 0 0x10000>;
105		};
106
107		// 8-bit custom Anybus Module on LocalPlus Bus CS3
108		anybus@3,0 {
109			compatible = "promess,motionpro-anybus";
110			reg = <3 0 0x10000>;
111		};
112		pro_module_general@3,0 {
113			compatible = "promess,pro_module_general";
114			reg = <3 0 3>;
115		};
116		pro_module_dio@3,800 {
117			compatible = "promess,pro_module_dio";
118			reg = <3 0x800 2>;
119		};
120
121		// 16-bit flash device at LocalPlus Bus CS0
122		flash@0,0 {
123			compatible = "cfi-flash";
124			reg = <0 0 0x01000000>;
125			bank-width = <2>;
126			device-width = <2>;
127			#size-cells = <1>;
128			#address-cells = <1>;
129		};
130
131	};
132};
133