1/*
2 * Motion-PRO board Device Tree Source
3 *
4 * Copyright (C) 2007 Semihalf
5 * Marian Balakowicz <m8@semihalf.com>
6 *
7 * This program is free software; you can redistribute  it and/or modify it
8 * under  the terms of  the GNU General  Public License as published by the
9 * Free Software Foundation;  either version 2 of the  License, or (at your
10 * option) any later version.
11 */
12
13/include/ "mpc5200b.dtsi"
14
15&gpt0 { fsl,has-wdt; };
16&gpt6 { // Motion-PRO status LED
17	compatible = "promess,motionpro-led";
18	label = "motionpro-statusled";
19	blink-delay = <100>; // 100 msec
20};
21&gpt7 { // Motion-PRO ready LED
22	compatible = "promess,motionpro-led";
23	label = "motionpro-readyled";
24};
25
26/ {
27	model = "promess,motionpro";
28	compatible = "promess,motionpro";
29
30	soc5200@f0000000 {
31		can@900 {
32			status = "disabled";
33		};
34
35		psc@2000 {		// PSC1
36			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
37		};
38
39		// PSC2 in spi master mode
40		psc@2200 {		// PSC2
41			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
42			cell-index = <1>;
43		};
44
45		psc@2400 {		// PSC3
46			status = "disabled";
47		};
48
49		psc@2600 {		// PSC4
50			status = "disabled";
51		};
52
53		psc@2800 {		// PSC5
54			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
55		};
56
57		psc@2c00 {		// PSC6
58			status = "disabled";
59		};
60
61		ethernet@3000 {
62			phy-handle = <&phy0>;
63		};
64
65		mdio@3000 {
66			phy0: ethernet-phy@2 {
67				reg = <2>;
68			};
69		};
70
71		i2c@3d00 {
72			status = "disabled";
73		};
74
75		i2c@3d40 {
76			rtc@68 {
77				compatible = "dallas,ds1339";
78				reg = <0x68>;
79			};
80		};
81
82		sram@8000 {
83			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
84			reg = <0x8000 0x4000>;
85		};
86	};
87
88	pci@f0000d00 {
89		status = "disabled";
90	};
91
92	localbus {
93		ranges = <0 0 0xff000000 0x01000000
94			  1 0 0x50000000 0x00010000
95			  2 0 0x50010000 0x00010000
96			  3 0 0x50020000 0x00010000>;
97
98		// 8-bit DualPort SRAM on LocalPlus Bus CS1
99		kollmorgen@1,0 {
100			compatible = "promess,motionpro-kollmorgen";
101			reg = <1 0 0x10000>;
102			interrupts = <1 1 0>;
103		};
104
105		// 8-bit board CPLD on LocalPlus Bus CS2
106		cpld@2,0 {
107			compatible = "promess,motionpro-cpld";
108			reg = <2 0 0x10000>;
109		};
110
111		// 8-bit custom Anybus Module on LocalPlus Bus CS3
112		anybus@3,0 {
113			compatible = "promess,motionpro-anybus";
114			reg = <3 0 0x10000>;
115		};
116		pro_module_general@3,0 {
117			compatible = "promess,pro_module_general";
118			reg = <3 0 3>;
119		};
120		pro_module_dio@3,800 {
121			compatible = "promess,pro_module_dio";
122			reg = <3 0x800 2>;
123		};
124
125		// 16-bit flash device at LocalPlus Bus CS0
126		flash@0,0 {
127			compatible = "cfi-flash";
128			reg = <0 0 0x01000000>;
129			bank-width = <2>;
130			device-width = <2>;
131			#size-cells = <1>;
132			#address-cells = <1>;
133		};
134
135	};
136};
137