1/*
2 * Freescale Media5200 board Device Tree Source
3 *
4 * Copyright 2009 Secret Lab Technologies Ltd.
5 * Grant Likely <grant.likely@secretlab.ca>
6 * Steven Cavanagh <scavanagh@secretlab.ca>
7 *
8 * This program is free software; you can redistribute  it and/or modify it
9 * under  the terms of  the GNU General  Public License as published by the
10 * Free Software Foundation;  either version 2 of the  License, or (at your
11 * option) any later version.
12 */
13
14/include/ "mpc5200b.dtsi"
15
16&gpt0 { fsl,has-wdt; };
17
18/ {
19	model = "fsl,media5200";
20	compatible = "fsl,media5200";
21
22	aliases {
23		console = &console;
24		ethernet0 = &eth0;
25	};
26
27	chosen {
28		stdout-path = &console;
29	};
30
31	cpus {
32		PowerPC,5200@0 {
33			timebase-frequency = <33000000>;	// 33 MHz, these were configured by U-Boot
34			bus-frequency = <132000000>;		// 132 MHz
35			clock-frequency = <396000000>;		// 396 MHz
36		};
37	};
38
39	memory {
40		reg = <0x00000000 0x08000000>;	// 128MB RAM
41	};
42
43	soc5200@f0000000 {
44		bus-frequency = <132000000>;// 132 MHz
45
46		psc@2000 {	// PSC1
47			status = "disabled";
48		};
49
50		psc@2200 {	// PSC2
51			status = "disabled";
52		};
53
54		psc@2400 {	// PSC3
55			status = "disabled";
56		};
57
58		psc@2600 {	// PSC4
59			status = "disabled";
60		};
61
62		psc@2800 {	// PSC5
63			status = "disabled";
64		};
65
66		// PSC6 in uart mode
67		console: psc@2c00 {		// PSC6
68			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
69		};
70
71		ethernet@3000 {
72			phy-handle = <&phy0>;
73		};
74
75		mdio@3000 {
76			phy0: ethernet-phy@0 {
77				reg = <0>;
78			};
79		};
80
81		usb@1000 {
82			reg = <0x1000 0x100>;
83		};
84	};
85
86	pci@f0000d00 {
87		interrupt-map-mask = <0xf800 0 0 7>;
88		interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
89				 0xc000 0 0 2 &media5200_fpga 0 3
90				 0xc000 0 0 3 &media5200_fpga 0 4
91				 0xc000 0 0 4 &media5200_fpga 0 5
92
93				 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
94				 0xc800 0 0 2 &media5200_fpga 0 4
95				 0xc800 0 0 3 &media5200_fpga 0 5
96				 0xc800 0 0 4 &media5200_fpga 0 2
97
98				 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
99				 0xd000 0 0 2 &media5200_fpga 0 5
100
101				 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
102				>;
103		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
104			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
105			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
106		interrupt-parent = <&mpc5200_pic>;
107	};
108
109	localbus {
110		ranges = < 0 0 0xfc000000 0x02000000
111			   1 0 0xfe000000 0x02000000
112			   2 0 0xf0010000 0x00010000
113			   3 0 0xf0020000 0x00010000 >;
114		flash@0,0 {
115			compatible = "amd,am29lv28ml", "cfi-flash";
116			reg = <0 0x0 0x2000000>;                // 32 MB
117			bank-width = <4>;                       // Width in bytes of the flash bank
118			device-width = <2>;                     // Two devices on each bank
119		};
120
121		flash@1,0 {
122			compatible = "amd,am29lv28ml", "cfi-flash";
123			reg = <1 0 0x2000000>;                  // 32 MB
124			bank-width = <4>;                       // Width in bytes of the flash bank
125			device-width = <2>;                     // Two devices on each bank
126		};
127
128		media5200_fpga: fpga@2,0 {
129			compatible = "fsl,media5200-fpga";
130			interrupt-controller;
131			#interrupt-cells = <2>;	// 0:bank 1:id; no type field
132			reg = <2 0 0x10000>;
133
134			interrupt-parent = <&mpc5200_pic>;
135			interrupts = <0 0 3	// IRQ bank 0
136			              1 1 3>;	// IRQ bank 1
137		};
138
139		uart@3,0 {
140			compatible = "ti,tl16c752bpt";
141			reg = <3 0 0x10000>;
142			interrupt-parent = <&media5200_fpga>;
143			interrupts = <0 0  0 1>; // 2 irqs
144		};
145	};
146};
147