1/*
2 * Lite5200B board Device Tree Source
3 *
4 * Copyright 2006-2007 Secret Lab Technologies Ltd.
5 * Grant Likely <grant.likely@secretlab.ca>
6 *
7 * This program is free software; you can redistribute  it and/or modify it
8 * under  the terms of  the GNU General  Public License as published by the
9 * Free Software Foundation;  either version 2 of the  License, or (at your
10 * option) any later version.
11 */
12
13/include/ "mpc5200b.dtsi"
14
15&gpt0 { fsl,has-wdt; };
16&gpt2 { gpio-controller; };
17&gpt3 { gpio-controller; };
18
19/ {
20	model = "fsl,lite5200b";
21	compatible = "fsl,lite5200b";
22
23	leds {
24		compatible = "gpio-leds";
25		tmr2 {
26			gpios = <&gpt2 0 1>;
27		};
28		tmr3 {
29			gpios = <&gpt3 0 1>;
30			linux,default-trigger = "heartbeat";
31		};
32		led1 { gpios = <&gpio_wkup 2 1>; };
33		led2 { gpios = <&gpio_simple 3 1>; };
34		led3 { gpios = <&gpio_wkup 3 1>; };
35		led4 { gpios = <&gpio_simple 2 1>; };
36	};
37
38	memory {
39		reg = <0x00000000 0x10000000>;	// 256MB
40	};
41
42	soc5200@f0000000 {
43		psc@2000 {		// PSC1
44			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
45			cell-index = <0>;
46		};
47
48		psc@2200 {		// PSC2
49			status = "disabled";
50		};
51
52		psc@2400 {		// PSC3
53			status = "disabled";
54		};
55
56		psc@2600 {		// PSC4
57			status = "disabled";
58		};
59
60		psc@2800 {		// PSC5
61			status = "disabled";
62		};
63
64		psc@2c00 {		// PSC6
65			status = "disabled";
66		};
67
68		// PSC2 in ac97 mode example
69		//ac97@2200 {		// PSC2
70		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
71		//	cell-index = <1>;
72		//};
73
74		// PSC3 in CODEC mode example
75		//i2s@2400 {		// PSC3
76		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
77		//	cell-index = <2>;
78		//};
79
80		// PSC6 in spi mode example
81		//spi@2c00 {		// PSC6
82		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
83		//	cell-index = <5>;
84		//};
85
86		ethernet@3000 {
87			phy-handle = <&phy0>;
88		};
89
90		mdio@3000 {
91			phy0: ethernet-phy@0 {
92				reg = <0>;
93			};
94		};
95
96		i2c@3d40 {
97			eeprom@50 {
98				compatible = "atmel,24c02";
99				reg = <0x50>;
100			};
101		};
102
103		sram@8000 {
104			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
105			reg = <0x8000 0x4000>;
106		};
107	};
108
109	pci@f0000d00 {
110		interrupt-map-mask = <0xf800 0 0 7>;
111		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
112				 0xc000 0 0 2 &mpc5200_pic 1 1 3
113				 0xc000 0 0 3 &mpc5200_pic 1 2 3
114				 0xc000 0 0 4 &mpc5200_pic 1 3 3
115
116				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
117				 0xc800 0 0 2 &mpc5200_pic 1 2 3
118				 0xc800 0 0 3 &mpc5200_pic 1 3 3
119				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
120		clock-frequency = <0>; // From boot loader
121		interrupts = <2 8 0 2 9 0 2 10 0>;
122		bus-range = <0 0>;
123		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
124			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
125			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
126	};
127
128	localbus {
129		ranges = <0 0 0xfe000000 0x02000000>;
130
131		flash@0,0 {
132			compatible = "cfi-flash";
133			reg = <0 0 0x02000000>;
134			bank-width = <1>;
135			#size-cells = <1>;
136			#address-cells = <1>;
137
138			partition@0 {
139				label = "kernel";
140				reg = <0x00000000 0x00200000>;
141			};
142			partition@200000 {
143				label = "rootfs";
144				reg = <0x00200000 0x01d00000>;
145			};
146			partition@1f00000 {
147				label = "u-boot";
148				reg = <0x01f00000 0x00060000>;
149			};
150			partition@1f60000 {
151				label = "u-boot-env";
152				reg = <0x01f60000 0x00020000>;
153			};
154			partition@1f80000 {
155				label = "dtb";
156				reg = <0x01f80000 0x00080000>;
157			};
158		};
159	};
160
161};
162