1/* 2 * Keymile KMETER1 Device Tree Source 3 * 4 * 2008-2011 DENX Software Engineering GmbH 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 */ 11 12/dts-v1/; 13 14/ { 15 model = "KMETER1"; 16 compatible = "keymile,KMETER1"; 17 #address-cells = <1>; 18 #size-cells = <1>; 19 20 aliases { 21 ethernet0 = &enet_piggy2; 22 ethernet1 = &enet_estar1; 23 ethernet2 = &enet_estar2; 24 ethernet3 = &enet_eth1; 25 ethernet4 = &enet_eth2; 26 ethernet5 = &enet_eth3; 27 ethernet6 = &enet_eth4; 28 serial0 = &serial0; 29 }; 30 31 cpus { 32 #address-cells = <1>; 33 #size-cells = <0>; 34 35 PowerPC,8360@0 { 36 device_type = "cpu"; 37 reg = <0x0>; 38 d-cache-line-size = <32>; // 32 bytes 39 i-cache-line-size = <32>; // 32 bytes 40 d-cache-size = <32768>; // L1, 32K 41 i-cache-size = <32768>; // L1, 32K 42 timebase-frequency = <0>; /* Filled in by U-Boot */ 43 bus-frequency = <0>; /* Filled in by U-Boot */ 44 clock-frequency = <0>; /* Filled in by U-Boot */ 45 }; 46 }; 47 48 memory { 49 device_type = "memory"; 50 reg = <0 0>; /* Filled in by U-Boot */ 51 }; 52 53 soc8360@e0000000 { 54 #address-cells = <1>; 55 #size-cells = <1>; 56 device_type = "soc"; 57 compatible = "fsl,mpc8360-immr", "simple-bus"; 58 ranges = <0x0 0xe0000000 0x00200000>; 59 reg = <0xe0000000 0x00000200>; 60 bus-frequency = <0>; /* Filled in by U-Boot */ 61 62 pmc: power@b00 { 63 compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; 64 reg = <0xb00 0x100 0xa00 0x100>; 65 interrupts = <80 0x8>; 66 interrupt-parent = <&ipic>; 67 }; 68 69 i2c@3000 { 70 #address-cells = <1>; 71 #size-cells = <0>; 72 cell-index = <0>; 73 compatible = "fsl,mpc8313-i2c","fsl-i2c"; 74 reg = <0x3000 0x100>; 75 interrupts = <14 0x8>; 76 interrupt-parent = <&ipic>; 77 clock-frequency = <400000>; 78 }; 79 80 serial0: serial@4500 { 81 cell-index = <0>; 82 device_type = "serial"; 83 compatible = "fsl,ns16550", "ns16550"; 84 reg = <0x4500 0x100>; 85 clock-frequency = <264000000>; 86 interrupts = <9 0x8>; 87 interrupt-parent = <&ipic>; 88 }; 89 90 dma@82a8 { 91 #address-cells = <1>; 92 #size-cells = <1>; 93 compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; 94 reg = <0x82a8 4>; 95 ranges = <0 0x8100 0x1a8>; 96 interrupt-parent = <&ipic>; 97 interrupts = <71 8>; 98 cell-index = <0>; 99 dma-channel@0 { 100 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; 101 reg = <0 0x80>; 102 interrupt-parent = <&ipic>; 103 interrupts = <71 8>; 104 }; 105 dma-channel@80 { 106 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; 107 reg = <0x80 0x80>; 108 interrupt-parent = <&ipic>; 109 interrupts = <71 8>; 110 }; 111 dma-channel@100 { 112 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; 113 reg = <0x100 0x80>; 114 interrupt-parent = <&ipic>; 115 interrupts = <71 8>; 116 }; 117 dma-channel@180 { 118 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; 119 reg = <0x180 0x28>; 120 interrupt-parent = <&ipic>; 121 interrupts = <71 8>; 122 }; 123 }; 124 125 ipic: pic@700 { 126 #address-cells = <0>; 127 #interrupt-cells = <2>; 128 compatible = "fsl,pq2pro-pic", "fsl,ipic"; 129 interrupt-controller; 130 reg = <0x700 0x100>; 131 }; 132 133 par_io@1400 { 134 #address-cells = <1>; 135 #size-cells = <0>; 136 reg = <0x1400 0x100>; 137 compatible = "fsl,mpc8360-par_io"; 138 num-ports = <7>; 139 140 qe_pio_c: gpio-controller@30 { 141 #gpio-cells = <2>; 142 compatible = "fsl,mpc8360-qe-pario-bank", 143 "fsl,mpc8323-qe-pario-bank"; 144 reg = <0x1430 0x18>; 145 gpio-controller; 146 }; 147 pio_ucc1: ucc_pin@0 { 148 reg = <0>; 149 150 pio-map = < 151 /* port pin dir open_drain assignment has_irq */ 152 0 1 3 0 2 0 /* MDIO */ 153 0 2 1 0 1 0 /* MDC */ 154 155 0 3 1 0 1 0 /* TxD0 */ 156 0 4 1 0 1 0 /* TxD1 */ 157 0 5 1 0 1 0 /* TxD2 */ 158 0 6 1 0 1 0 /* TxD3 */ 159 0 9 2 0 1 0 /* RxD0 */ 160 0 10 2 0 1 0 /* RxD1 */ 161 0 11 2 0 1 0 /* RxD2 */ 162 0 12 2 0 1 0 /* RxD3 */ 163 0 7 1 0 1 0 /* TX_EN */ 164 0 8 1 0 1 0 /* TX_ER */ 165 0 15 2 0 1 0 /* RX_DV */ 166 0 16 2 0 1 0 /* RX_ER */ 167 0 0 2 0 1 0 /* RX_CLK */ 168 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ 169 2 8 2 0 1 0 /* GTX125 - CLK9 */ 170 >; 171 }; 172 173 pio_ucc2: ucc_pin@1 { 174 reg = <1>; 175 176 pio-map = < 177 /* port pin dir open_drain assignment has_irq */ 178 0 1 3 0 2 0 /* MDIO */ 179 0 2 1 0 1 0 /* MDC */ 180 181 0 17 1 0 1 0 /* TxD0 */ 182 0 18 1 0 1 0 /* TxD1 */ 183 0 19 1 0 1 0 /* TxD2 */ 184 0 20 1 0 1 0 /* TxD3 */ 185 0 23 2 0 1 0 /* RxD0 */ 186 0 24 2 0 1 0 /* RxD1 */ 187 0 25 2 0 1 0 /* RxD2 */ 188 0 26 2 0 1 0 /* RxD3 */ 189 0 21 1 0 1 0 /* TX_EN */ 190 0 22 1 0 1 0 /* TX_ER */ 191 0 29 2 0 1 0 /* RX_DV */ 192 0 30 2 0 1 0 /* RX_ER */ 193 0 31 2 0 1 0 /* RX_CLK */ 194 2 2 1 0 2 0 /* GTX_CLK - CLK3 */ 195 2 3 2 0 1 0 /* GTX125 - CLK4 */ 196 >; 197 }; 198 199 pio_ucc4: ucc_pin@3 { 200 reg = <3>; 201 202 pio-map = < 203 /* port pin dir open_drain assignment has_irq */ 204 0 1 3 0 2 0 /* MDIO */ 205 0 2 1 0 1 0 /* MDC */ 206 207 1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */ 208 1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */ 209 1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */ 210 1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */ 211 1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */ 212 1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */ 213 1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */ 214 215 2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */ 216 >; 217 }; 218 219 pio_ucc5: ucc_pin@4 { 220 reg = <4>; 221 222 pio-map = < 223 /* port pin dir open_drain assignment has_irq */ 224 0 1 3 0 2 0 /* MDIO */ 225 0 2 1 0 1 0 /* MDC */ 226 227 3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */ 228 3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */ 229 3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */ 230 3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */ 231 3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */ 232 3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */ 233 3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */ 234 >; 235 }; 236 237 pio_ucc6: ucc_pin@5 { 238 reg = <5>; 239 240 pio-map = < 241 /* port pin dir open_drain assignment has_irq */ 242 0 1 3 0 2 0 /* MDIO */ 243 0 2 1 0 1 0 /* MDC */ 244 245 3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */ 246 3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */ 247 3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */ 248 3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */ 249 3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */ 250 3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */ 251 3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */ 252 >; 253 }; 254 255 pio_ucc7: ucc_pin@6 { 256 reg = <6>; 257 258 pio-map = < 259 /* port pin dir open_drain assignment has_irq */ 260 0 1 3 0 2 0 /* MDIO */ 261 0 2 1 0 1 0 /* MDC */ 262 263 4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */ 264 4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */ 265 4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */ 266 4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */ 267 4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */ 268 4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */ 269 4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */ 270 >; 271 }; 272 273 pio_ucc8: ucc_pin@7 { 274 reg = <7>; 275 276 pio-map = < 277 /* port pin dir open_drain assignment has_irq */ 278 0 1 3 0 2 0 /* MDIO */ 279 0 2 1 0 1 0 /* MDC */ 280 281 4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */ 282 4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */ 283 4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */ 284 4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */ 285 4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */ 286 4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */ 287 4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */ 288 289 2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */ 290 >; 291 }; 292 293 }; 294 295 qe@100000 { 296 #address-cells = <1>; 297 #size-cells = <1>; 298 compatible = "fsl,qe"; 299 ranges = <0x0 0x100000 0x100000>; 300 reg = <0x100000 0x480>; 301 clock-frequency = <0>; /* Filled in by U-Boot */ 302 brg-frequency = <0>; /* Filled in by U-Boot */ 303 bus-frequency = <0>; /* Filled in by U-Boot */ 304 305 muram@10000 { 306 #address-cells = <1>; 307 #size-cells = <1>; 308 compatible = "fsl,qe-muram", "fsl,cpm-muram"; 309 ranges = <0x0 0x00010000 0x0000c000>; 310 311 data-only@0 { 312 compatible = "fsl,qe-muram-data", 313 "fsl,cpm-muram-data"; 314 reg = <0x0 0xc000>; 315 }; 316 }; 317 318 /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ 319 enet_estar1: ucc@2000 { 320 device_type = "network"; 321 compatible = "ucc_geth"; 322 cell-index = <1>; 323 reg = <0x2000 0x200>; 324 interrupts = <32>; 325 interrupt-parent = <&qeic>; 326 local-mac-address = [ 00 00 00 00 00 00 ]; 327 rx-clock-name = "none"; 328 tx-clock-name = "clk9"; 329 phy-handle = <&phy_estar1>; 330 phy-connection-type = "rgmii-id"; 331 pio-handle = <&pio_ucc1>; 332 }; 333 334 /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ 335 enet_estar2: ucc@3000 { 336 device_type = "network"; 337 compatible = "ucc_geth"; 338 cell-index = <2>; 339 reg = <0x3000 0x200>; 340 interrupts = <33>; 341 interrupt-parent = <&qeic>; 342 local-mac-address = [ 00 00 00 00 00 00 ]; 343 rx-clock-name = "none"; 344 tx-clock-name = "clk4"; 345 phy-handle = <&phy_estar2>; 346 phy-connection-type = "rgmii-id"; 347 pio-handle = <&pio_ucc2>; 348 }; 349 350 /* Piggy2 (UCC4, MDIO 0x00, RMII) */ 351 enet_piggy2: ucc@3200 { 352 device_type = "network"; 353 compatible = "ucc_geth"; 354 cell-index = <4>; 355 reg = <0x3200 0x200>; 356 interrupts = <35>; 357 interrupt-parent = <&qeic>; 358 local-mac-address = [ 00 00 00 00 00 00 ]; 359 rx-clock-name = "none"; 360 tx-clock-name = "clk17"; 361 phy-handle = <&phy_piggy2>; 362 phy-connection-type = "rmii"; 363 pio-handle = <&pio_ucc4>; 364 }; 365 366 /* Eth-1 (UCC5, MDIO 0x08, RMII) */ 367 enet_eth1: ucc@2400 { 368 device_type = "network"; 369 compatible = "ucc_geth"; 370 cell-index = <5>; 371 reg = <0x2400 0x200>; 372 interrupts = <40>; 373 interrupt-parent = <&qeic>; 374 local-mac-address = [ 00 00 00 00 00 00 ]; 375 rx-clock-name = "none"; 376 tx-clock-name = "clk16"; 377 phy-handle = <&phy_eth1>; 378 phy-connection-type = "rmii"; 379 pio-handle = <&pio_ucc5>; 380 }; 381 382 /* Eth-2 (UCC6, MDIO 0x09, RMII) */ 383 enet_eth2: ucc@3400 { 384 device_type = "network"; 385 compatible = "ucc_geth"; 386 cell-index = <6>; 387 reg = <0x3400 0x200>; 388 interrupts = <41>; 389 interrupt-parent = <&qeic>; 390 local-mac-address = [ 00 00 00 00 00 00 ]; 391 rx-clock-name = "none"; 392 tx-clock-name = "clk16"; 393 phy-handle = <&phy_eth2>; 394 phy-connection-type = "rmii"; 395 pio-handle = <&pio_ucc6>; 396 }; 397 398 /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ 399 enet_eth3: ucc@2600 { 400 device_type = "network"; 401 compatible = "ucc_geth"; 402 cell-index = <7>; 403 reg = <0x2600 0x200>; 404 interrupts = <42>; 405 interrupt-parent = <&qeic>; 406 local-mac-address = [ 00 00 00 00 00 00 ]; 407 rx-clock-name = "none"; 408 tx-clock-name = "clk16"; 409 phy-handle = <&phy_eth3>; 410 phy-connection-type = "rmii"; 411 pio-handle = <&pio_ucc7>; 412 }; 413 414 /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ 415 enet_eth4: ucc@3600 { 416 device_type = "network"; 417 compatible = "ucc_geth"; 418 cell-index = <8>; 419 reg = <0x3600 0x200>; 420 interrupts = <43>; 421 interrupt-parent = <&qeic>; 422 local-mac-address = [ 00 00 00 00 00 00 ]; 423 rx-clock-name = "none"; 424 tx-clock-name = "clk16"; 425 phy-handle = <&phy_eth4>; 426 phy-connection-type = "rmii"; 427 pio-handle = <&pio_ucc8>; 428 }; 429 430 mdio@3320 { 431 #address-cells = <1>; 432 #size-cells = <0>; 433 reg = <0x3320 0x18>; 434 compatible = "fsl,ucc-mdio"; 435 436 /* Piggy2 (UCC4, MDIO 0x00, RMII) */ 437 phy_piggy2: ethernet-phy@00 { 438 reg = <0x0>; 439 }; 440 441 /* Eth-1 (UCC5, MDIO 0x08, RMII) */ 442 phy_eth1: ethernet-phy@08 { 443 reg = <0x08>; 444 }; 445 446 /* Eth-2 (UCC6, MDIO 0x09, RMII) */ 447 phy_eth2: ethernet-phy@09 { 448 reg = <0x09>; 449 }; 450 451 /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ 452 phy_eth3: ethernet-phy@0a { 453 reg = <0x0a>; 454 }; 455 456 /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ 457 phy_eth4: ethernet-phy@0b { 458 reg = <0x0b>; 459 }; 460 461 /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ 462 phy_estar1: ethernet-phy@10 { 463 interrupt-parent = <&ipic>; 464 interrupts = <17 0x8>; 465 reg = <0x10>; 466 }; 467 468 /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ 469 phy_estar2: ethernet-phy@11 { 470 interrupt-parent = <&ipic>; 471 interrupts = <18 0x8>; 472 reg = <0x11>; 473 }; 474 }; 475 476 qeic: interrupt-controller@80 { 477 interrupt-controller; 478 compatible = "fsl,qe-ic"; 479 #address-cells = <0>; 480 #interrupt-cells = <1>; 481 reg = <0x80 0x80>; 482 big-endian; 483 interrupts = < 484 32 0x8 485 33 0x8 486 34 0x8 487 35 0x8 488 40 0x8 489 41 0x8 490 42 0x8 491 43 0x8 492 >; 493 interrupt-parent = <&ipic>; 494 }; 495 }; 496 }; 497 498 localbus@e0005000 { 499 #address-cells = <2>; 500 #size-cells = <1>; 501 compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", 502 "simple-bus"; 503 reg = <0xe0005000 0xd8>; 504 ranges = <0 0 0xf0000000 0x04000000 /* LB 0 */ 505 1 0 0xe8000000 0x01000000 /* LB 1 */ 506 3 0 0xa0000000 0x10000000>; /* LB 3 */ 507 508 flash@0,0 { 509 compatible = "cfi-flash"; 510 reg = <0 0 0x04000000>; 511 #address-cells = <1>; 512 #size-cells = <1>; 513 bank-width = <2>; 514 partition@0 { /* 768KB */ 515 label = "u-boot"; 516 reg = <0 0xC0000>; 517 }; 518 partition@c0000 { /* 128KB */ 519 label = "env"; 520 reg = <0xC0000 0x20000>; 521 }; 522 partition@e0000 { /* 128KB */ 523 label = "envred"; 524 reg = <0xE0000 0x20000>; 525 }; 526 partition@100000 { /* 64512KB */ 527 label = "ubi0"; 528 reg = <0x100000 0x3F00000>; 529 }; 530 }; 531 }; 532}; 533