xref: /openbmc/linux/arch/powerpc/boot/dts/kmeter1.dts (revision 4cff79e9)
1/*
2 * Keymile KMETER1 Device Tree Source
3 *
4 * 2008-2011 DENX Software Engineering GmbH
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	model = "KMETER1";
16	compatible = "keymile,KMETER1";
17	#address-cells = <1>;
18	#size-cells = <1>;
19
20	aliases {
21		ethernet0 = &enet_piggy2;
22		ethernet1 = &enet_estar1;
23		ethernet2 = &enet_estar2;
24		ethernet3 = &enet_eth1;
25		ethernet4 = &enet_eth2;
26		ethernet5 = &enet_eth3;
27		ethernet6 = &enet_eth4;
28		serial0 = &serial0;
29	};
30
31	cpus {
32		#address-cells = <1>;
33		#size-cells = <0>;
34
35		PowerPC,8360@0 {
36			device_type = "cpu";
37			reg = <0x0>;
38			d-cache-line-size = <32>;	// 32 bytes
39			i-cache-line-size = <32>;	// 32 bytes
40			d-cache-size = <32768>;		// L1, 32K
41			i-cache-size = <32768>;		// L1, 32K
42			timebase-frequency = <0>;	/* Filled in by U-Boot */
43			bus-frequency = <0>;	/* Filled in by U-Boot */
44			clock-frequency = <0>;	/* Filled in by U-Boot */
45		};
46	};
47
48	memory {
49		device_type = "memory";
50		reg = <0 0>;	/* Filled in by U-Boot */
51	};
52
53	soc8360@e0000000 {
54		#address-cells = <1>;
55		#size-cells = <1>;
56		device_type = "soc";
57		compatible = "fsl,mpc8360-immr", "simple-bus";
58		ranges = <0x0 0xe0000000 0x00200000>;
59		reg = <0xe0000000 0x00000200>;
60		bus-frequency = <0>;	/* Filled in by U-Boot */
61
62		pmc: power@b00 {
63			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
64			reg = <0xb00 0x100 0xa00 0x100>;
65			interrupts = <80 0x8>;
66			interrupt-parent = <&ipic>;
67		};
68
69		i2c@3000 {
70			#address-cells = <1>;
71			#size-cells = <0>;
72			cell-index = <0>;
73			compatible = "fsl,mpc8313-i2c","fsl-i2c";
74			reg = <0x3000 0x100>;
75			interrupts = <14 0x8>;
76			interrupt-parent = <&ipic>;
77			clock-frequency = <400000>;
78		};
79
80		serial0: serial@4500 {
81			cell-index = <0>;
82			device_type = "serial";
83			compatible = "fsl,ns16550", "ns16550";
84			reg = <0x4500 0x100>;
85			clock-frequency = <264000000>;
86			interrupts = <9 0x8>;
87			interrupt-parent = <&ipic>;
88		};
89
90		dma@82a8 {
91			#address-cells = <1>;
92			#size-cells = <1>;
93			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
94			reg = <0x82a8 4>;
95			ranges = <0 0x8100 0x1a8>;
96			interrupt-parent = <&ipic>;
97			interrupts = <71 8>;
98			cell-index = <0>;
99			dma-channel@0 {
100				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
101				reg = <0 0x80>;
102				interrupt-parent = <&ipic>;
103				interrupts = <71 8>;
104			};
105			dma-channel@80 {
106				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
107				reg = <0x80 0x80>;
108				interrupt-parent = <&ipic>;
109				interrupts = <71 8>;
110			};
111			dma-channel@100 {
112				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
113				reg = <0x100 0x80>;
114				interrupt-parent = <&ipic>;
115				interrupts = <71 8>;
116			};
117			dma-channel@180 {
118				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
119				reg = <0x180 0x28>;
120				interrupt-parent = <&ipic>;
121				interrupts = <71 8>;
122			};
123		};
124
125		ipic: pic@700 {
126			#address-cells = <0>;
127			#interrupt-cells = <2>;
128			compatible = "fsl,pq2pro-pic", "fsl,ipic";
129			interrupt-controller;
130			reg = <0x700 0x100>;
131		};
132
133		par_io@1400 {
134			#address-cells = <1>;
135			#size-cells = <0>;
136			reg = <0x1400 0x100>;
137			compatible = "fsl,mpc8360-par_io";
138			num-ports = <7>;
139
140			qe_pio_c: gpio-controller@30 {
141				#gpio-cells = <2>;
142				compatible = "fsl,mpc8360-qe-pario-bank",
143					     "fsl,mpc8323-qe-pario-bank";
144				reg = <0x1430 0x18>;
145				gpio-controller;
146			};
147			pio_ucc1: ucc_pin@0 {
148				reg = <0>;
149
150				pio-map = <
151					/* port pin dir open_drain assignment has_irq */
152					0   1  3  0  2  0	/* MDIO   */
153					0   2  1  0  1  0	/* MDC    */
154
155					0   3  1  0  1  0	/* TxD0   */
156					0   4  1  0  1  0	/* TxD1   */
157					0   5  1  0  1  0	/* TxD2   */
158					0   6  1  0  1  0	/* TxD3   */
159					0   9  2  0  1  0	/* RxD0   */
160					0  10  2  0  1  0	/* RxD1   */
161					0  11  2  0  1  0	/* RxD2   */
162					0  12  2  0  1  0	/* RxD3   */
163					0   7  1  0  1  0	/* TX_EN  */
164					0   8  1  0  1  0	/* TX_ER  */
165					0  15  2  0  1  0	/* RX_DV  */
166					0  16  2  0  1  0	/* RX_ER  */
167					0   0  2  0  1  0	/* RX_CLK */
168					2   9  1  0  3  0	/* GTX_CLK - CLK10 */
169					2   8  2  0  1  0	/* GTX125  - CLK9  */
170				>;
171			};
172
173			pio_ucc2: ucc_pin@1 {
174				reg = <1>;
175
176				pio-map = <
177					/* port pin dir open_drain assignment has_irq */
178					0   1  3  0  2  0	/* MDIO   */
179					0   2  1  0  1  0	/* MDC    */
180
181					0  17  1  0  1  0	/* TxD0   */
182					0  18  1  0  1  0	/* TxD1   */
183					0  19  1  0  1  0	/* TxD2   */
184					0  20  1  0  1  0	/* TxD3   */
185					0  23  2  0  1  0	/* RxD0   */
186					0  24  2  0  1  0	/* RxD1   */
187					0  25  2  0  1  0	/* RxD2   */
188					0  26  2  0  1  0	/* RxD3   */
189					0  21  1  0  1  0	/* TX_EN  */
190					0  22  1  0  1  0	/* TX_ER  */
191					0  29  2  0  1  0	/* RX_DV  */
192					0  30  2  0  1  0	/* RX_ER  */
193					0  31  2  0  1  0	/* RX_CLK */
194					2  2   1  0  2  0	/* GTX_CLK - CLK3  */
195					2  3   2  0  1  0	/* GTX125  - CLK4  */
196				>;
197			};
198
199			pio_ucc4: ucc_pin@3 {
200				reg = <3>;
201
202				pio-map = <
203					/* port pin dir open_drain assignment has_irq */
204					0   1  3  0  2  0	/* MDIO */
205					0   2  1  0  1  0	/* MDC  */
206
207					1  14  1  0  1  0	/* TxD0   (PB14, out, f1) */
208					1  15  1  0  1  0	/* TxD1   (PB15, out, f1) */
209					1  20  2  0  1  0	/* RxD0   (PB20, in,  f1) */
210					1  21  2  0  1  0	/* RxD1   (PB21, in,  f1) */
211					1  18  1  0  1  0	/* TX_EN  (PB18, out, f1) */
212					1  26  2  0  1  0	/* RX_DV  (PB26, in,  f1) */
213					1  27  2  0  1  0	/* RX_ER  (PB27, in,  f1) */
214
215					2  16  2  0  1  0	/* UCC4_RMII_CLK (CLK17) */
216				>;
217			};
218
219			pio_ucc5: ucc_pin@4 {
220				reg = <4>;
221
222				pio-map = <
223					/* port pin dir open_drain assignment has_irq */
224					0   1  3  0  2  0	/* MDIO */
225					0   2  1  0  1  0	/* MDC  */
226
227					3   0  1  0  1  0	/* TxD0  (PD0,  out, f1) */
228					3   1  1  0  1  0	/* TxD1  (PD1,  out, f1) */
229					3   6  2  0  1  0	/* RxD0  (PD6,   in, f1) */
230					3   7  2  0  1  0	/* RxD1  (PD7,   in, f1) */
231					3   4  1  0  1  0	/* TX_EN (PD4,  out, f1) */
232					3  12  2  0  1  0	/* RX_DV (PD12,  in, f1) */
233					3  13  2  0  1  0	/* RX_ER (PD13,  in, f1) */
234				>;
235			};
236
237			pio_ucc6: ucc_pin@5 {
238				reg = <5>;
239
240				pio-map = <
241					/* port pin dir open_drain assignment has_irq */
242					0   1  3  0  2  0	/* MDIO */
243					0   2  1  0  1  0	/* MDC  */
244
245					3  14  1  0  1  0	/* TxD0   (PD14, out, f1) */
246					3  15  1  0  1  0	/* TxD1   (PD15, out, f1) */
247					3  20  2  0  1  0	/* RxD0   (PD20, in,  f1) */
248					3  21  2  0  1  0	/* RxD1   (PD21, in,  f1) */
249					3  18  1  0  1  0	/* TX_EN  (PD18, out, f1) */
250					3  26  2  0  1  0	/* RX_DV  (PD26, in,  f1) */
251					3  27  2  0  1  0	/* RX_ER  (PD27, in,  f1) */
252				>;
253			};
254
255			pio_ucc7: ucc_pin@6 {
256				reg = <6>;
257
258				pio-map = <
259					/* port pin dir open_drain assignment has_irq */
260					0   1  3  0  2  0	/* MDIO */
261					0   2  1  0  1  0	/* MDC  */
262
263					4   0  1  0  1  0	/* TxD0   (PE0,  out, f1) */
264					4   1  1  0  1  0	/* TxD1   (PE1,  out, f1) */
265					4   6  2  0  1  0	/* RxD0   (PE6,   in, f1) */
266					4   7  2  0  1  0	/* RxD1   (PE7,   in, f1) */
267					4   4  1  0  1  0	/* TX_EN  (PE4,  out, f1) */
268					4  12  2  0  1  0	/* RX_DV  (PE12,  in, f1) */
269					4  13  2  0  1  0	/* RX_ER  (PE13,  in, f1) */
270				>;
271			};
272
273			pio_ucc8: ucc_pin@7 {
274				reg = <7>;
275
276				pio-map = <
277					/* port pin dir open_drain assignment has_irq */
278					0   1  3  0  2  0	/* MDIO */
279					0   2  1  0  1  0	/* MDC  */
280
281					4  14  1  0  2  0	/* TxD0   (PE14, out, f2) */
282					4  15  1  0  1  0	/* TxD1   (PE15, out, f1) */
283					4  20  2  0  1  0	/* RxD0   (PE20, in,  f1) */
284					4  21  2  0  1  0	/* RxD1   (PE21, in,  f1) */
285					4  18  1  0  1  0	/* TX_EN  (PE18, out, f1) */
286					4  26  2  0  1  0	/* RX_DV  (PE26, in,  f1) */
287					4  27  2  0  1  0	/* RX_ER  (PE27, in,  f1) */
288
289					2  15  2  0  1  0	/* UCCx_RMII_CLK (CLK16) */
290				>;
291			};
292
293		};
294
295		qe@100000 {
296			#address-cells = <1>;
297			#size-cells = <1>;
298			compatible = "fsl,qe";
299			ranges = <0x0 0x100000 0x100000>;
300			reg = <0x100000 0x480>;
301			clock-frequency = <0>;	/* Filled in by U-Boot */
302			brg-frequency = <0>;	/* Filled in by U-Boot */
303			bus-frequency = <0>;	/* Filled in by U-Boot */
304
305			muram@10000 {
306				#address-cells = <1>;
307				#size-cells = <1>;
308				compatible = "fsl,qe-muram", "fsl,cpm-muram";
309				ranges = <0x0 0x00010000 0x0000c000>;
310
311				data-only@0 {
312					compatible = "fsl,qe-muram-data",
313						     "fsl,cpm-muram-data";
314					reg = <0x0 0xc000>;
315				};
316			};
317
318			/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
319			enet_estar1: ucc@2000 {
320				device_type = "network";
321				compatible = "ucc_geth";
322				cell-index = <1>;
323				reg = <0x2000 0x200>;
324				interrupts = <32>;
325				interrupt-parent = <&qeic>;
326				local-mac-address = [ 00 00 00 00 00 00 ];
327				rx-clock-name = "none";
328				tx-clock-name = "clk9";
329				phy-handle = <&phy_estar1>;
330				phy-connection-type = "rgmii-id";
331				pio-handle = <&pio_ucc1>;
332			};
333
334			/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
335			enet_estar2: ucc@3000 {
336				device_type = "network";
337				compatible = "ucc_geth";
338				cell-index = <2>;
339				reg = <0x3000 0x200>;
340				interrupts = <33>;
341				interrupt-parent = <&qeic>;
342				local-mac-address = [ 00 00 00 00 00 00 ];
343				rx-clock-name = "none";
344				tx-clock-name = "clk4";
345				phy-handle = <&phy_estar2>;
346				phy-connection-type = "rgmii-id";
347				pio-handle = <&pio_ucc2>;
348			};
349
350			/* Piggy2 (UCC4, MDIO 0x00, RMII) */
351			enet_piggy2: ucc@3200 {
352				device_type = "network";
353				compatible = "ucc_geth";
354				cell-index = <4>;
355				reg = <0x3200 0x200>;
356				interrupts = <35>;
357				interrupt-parent = <&qeic>;
358				local-mac-address = [ 00 00 00 00 00 00 ];
359				rx-clock-name = "none";
360				tx-clock-name = "clk17";
361				phy-handle = <&phy_piggy2>;
362				phy-connection-type = "rmii";
363				pio-handle = <&pio_ucc4>;
364			};
365
366			/* Eth-1 (UCC5, MDIO 0x08, RMII) */
367			enet_eth1: ucc@2400 {
368				device_type = "network";
369				compatible = "ucc_geth";
370				cell-index = <5>;
371				reg = <0x2400 0x200>;
372				interrupts = <40>;
373				interrupt-parent = <&qeic>;
374				local-mac-address = [ 00 00 00 00 00 00 ];
375				rx-clock-name = "none";
376				tx-clock-name = "clk16";
377				phy-handle = <&phy_eth1>;
378				phy-connection-type = "rmii";
379				pio-handle = <&pio_ucc5>;
380			};
381
382			/* Eth-2 (UCC6, MDIO 0x09, RMII) */
383			enet_eth2: ucc@3400 {
384				device_type = "network";
385				compatible = "ucc_geth";
386				cell-index = <6>;
387				reg = <0x3400 0x200>;
388				interrupts = <41>;
389				interrupt-parent = <&qeic>;
390				local-mac-address = [ 00 00 00 00 00 00 ];
391				rx-clock-name = "none";
392				tx-clock-name = "clk16";
393				phy-handle = <&phy_eth2>;
394				phy-connection-type = "rmii";
395				pio-handle = <&pio_ucc6>;
396			};
397
398			/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
399			enet_eth3: ucc@2600 {
400				device_type = "network";
401				compatible = "ucc_geth";
402				cell-index = <7>;
403				reg = <0x2600 0x200>;
404				interrupts = <42>;
405				interrupt-parent = <&qeic>;
406				local-mac-address = [ 00 00 00 00 00 00 ];
407				rx-clock-name = "none";
408				tx-clock-name = "clk16";
409				phy-handle = <&phy_eth3>;
410				phy-connection-type = "rmii";
411				pio-handle = <&pio_ucc7>;
412			};
413
414			/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
415			enet_eth4: ucc@3600 {
416				device_type = "network";
417				compatible = "ucc_geth";
418				cell-index = <8>;
419				reg = <0x3600 0x200>;
420				interrupts = <43>;
421				interrupt-parent = <&qeic>;
422				local-mac-address = [ 00 00 00 00 00 00 ];
423				rx-clock-name = "none";
424				tx-clock-name = "clk16";
425				phy-handle = <&phy_eth4>;
426				phy-connection-type = "rmii";
427				pio-handle = <&pio_ucc8>;
428			};
429
430			mdio@3320 {
431				#address-cells = <1>;
432				#size-cells = <0>;
433				reg = <0x3320 0x18>;
434				compatible = "fsl,ucc-mdio";
435
436				/* Piggy2 (UCC4, MDIO 0x00, RMII) */
437				phy_piggy2: ethernet-phy@0 {
438					reg = <0x0>;
439				};
440
441				/* Eth-1 (UCC5, MDIO 0x08, RMII) */
442				phy_eth1: ethernet-phy@8 {
443					reg = <0x08>;
444				};
445
446				/* Eth-2 (UCC6, MDIO 0x09, RMII) */
447				phy_eth2: ethernet-phy@9 {
448					reg = <0x09>;
449				};
450
451				/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
452				phy_eth3: ethernet-phy@a {
453					reg = <0x0a>;
454				};
455
456				/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
457				phy_eth4: ethernet-phy@b {
458					reg = <0x0b>;
459				};
460
461				/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
462				phy_estar1: ethernet-phy@10 {
463					interrupt-parent = <&ipic>;
464					interrupts = <17 0x8>;
465					reg = <0x10>;
466				};
467
468				/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
469				phy_estar2: ethernet-phy@11 {
470					interrupt-parent = <&ipic>;
471					interrupts = <18 0x8>;
472					reg = <0x11>;
473				};
474			};
475
476			qeic: interrupt-controller@80 {
477				interrupt-controller;
478				compatible = "fsl,qe-ic";
479				#address-cells = <0>;
480				#interrupt-cells = <1>;
481				reg = <0x80 0x80>;
482				big-endian;
483				interrupts = <
484					32 0x8
485					33 0x8
486					34 0x8
487					35 0x8
488					40 0x8
489					41 0x8
490					42 0x8
491					43 0x8
492				>;
493				interrupt-parent = <&ipic>;
494			};
495		};
496	};
497
498	localbus@e0005000 {
499		#address-cells = <2>;
500		#size-cells = <1>;
501		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
502			     "simple-bus";
503		reg = <0xe0005000 0xd8>;
504		ranges = <0 0 0xf0000000 0x04000000	/* LB 0 */
505			  1 0 0xe8000000 0x01000000	/* LB 1 */
506			  3 0 0xa0000000 0x10000000>;	/* LB 3 */
507
508		flash@0,0 {
509			compatible = "cfi-flash";
510			reg = <0 0 0x04000000>;
511			#address-cells = <1>;
512			#size-cells = <1>;
513			bank-width = <2>;
514			partition@0 { /* 768KB */
515				label = "u-boot";
516				reg = <0 0xC0000>;
517			};
518			partition@c0000 { /* 128KB */
519				label = "env";
520				reg = <0xC0000 0x20000>;
521			};
522			partition@e0000 { /* 128KB */
523				label = "envred";
524				reg = <0xE0000 0x20000>;
525			};
526			partition@100000 { /* 64512KB */
527				label = "ubi0";
528				reg = <0x100000 0x3F00000>;
529			};
530		};
531	};
532};
533