1/*
2 * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ]
3 *
4 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35fman@500000 {
36	fman1_rx_0x0c: port@8c000 {
37		cell-index = <0xc>;
38		compatible = "fsl,fman-v3-port-rx";
39		reg = <0x8c000 0x1000>;
40	};
41
42	fman1_tx_0x2c: port@ac000 {
43		cell-index = <0x2c>;
44		compatible = "fsl,fman-v3-port-tx";
45		reg = <0xac000 0x1000>;
46	};
47
48	ethernet@e8000 {
49		cell-index = <4>;
50		compatible = "fsl,fman-memac";
51		reg = <0xe8000 0x1000>;
52		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
53		ptp-timer = <&ptp_timer1>;
54		pcsphy-handle = <&pcsphy12>;
55	};
56
57	mdio@e9000 {
58		#address-cells = <1>;
59		#size-cells = <0>;
60		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
61		reg = <0xe9000 0x1000>;
62
63		pcsphy12: ethernet-phy@0 {
64			reg = <0x0>;
65		};
66	};
67};
68