1/*
2 * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
3 *
4 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35fman@400000 {
36	fman0_rx_0x09: port@89000 {
37		cell-index = <0x9>;
38		compatible = "fsl,fman-v3-port-rx";
39		reg = <0x89000 0x1000>;
40	};
41
42	fman0_tx_0x29: port@a9000 {
43		cell-index = <0x29>;
44		compatible = "fsl,fman-v3-port-tx";
45		reg = <0xa9000 0x1000>;
46	};
47
48	ethernet@e2000 {
49		cell-index = <1>;
50		compatible = "fsl,fman-memac";
51		reg = <0xe2000 0x1000>;
52		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
53		ptp-timer = <&ptp_timer0>;
54		pcsphy-handle = <&pcsphy1>, <&qsgmiia_pcs1>;
55		pcs-handle-names = "sgmii", "qsgmii";
56	};
57
58	mdio@e1000 {
59		qsgmiia_pcs1: ethernet-pcs@1 {
60			compatible = "fsl,lynx-pcs";
61			reg = <1>;
62		};
63	};
64
65	mdio@e3000 {
66		#address-cells = <1>;
67		#size-cells = <0>;
68		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
69		reg = <0xe3000 0x1000>;
70		fsl,erratum-a011043; /* must ignore read errors */
71
72		pcsphy1: ethernet-phy@0 {
73			reg = <0x0>;
74		};
75	};
76};
77