1/*
2 * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
3 *
4 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *	 notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *	 notice, this list of conditions and the following disclaimer in the
12 *	 documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *	 names of its contributors may be used to endorse or promote products
15 *	 derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35fman@400000 {
36	fman0_rx_0x08: port@88000 {
37		cell-index = <0x8>;
38		compatible = "fsl,fman-v3-port-rx";
39		reg = <0x88000 0x1000>;
40		fsl,fman-10g-port;
41		fsl,fman-best-effort-port;
42	};
43
44	fman0_tx_0x28: port@a8000 {
45		cell-index = <0x28>;
46		compatible = "fsl,fman-v3-port-tx";
47		reg = <0xa8000 0x1000>;
48		fsl,fman-10g-port;
49		fsl,fman-best-effort-port;
50	};
51
52	ethernet@e0000 {
53		cell-index = <0>;
54		compatible = "fsl,fman-memac";
55		reg = <0xe0000 0x1000>;
56		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
57		ptp-timer = <&ptp_timer0>;
58		pcsphy-handle = <&pcsphy0>;
59	};
60
61	mdio@e1000 {
62		#address-cells = <1>;
63		#size-cells = <0>;
64		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
65		reg = <0xe1000 0x1000>;
66		fsl,erratum-a011043; /* must ignore read errors */
67
68		pcsphy0: ethernet-phy@0 {
69			reg = <0x0>;
70		};
71	};
72};
73