xref: /openbmc/linux/arch/powerpc/boot/dts/fsl/ppa8548.dts (revision ddc141e5) 
1/*
2 * PPA8548 Device Tree Source (36-bit address map)
3 * Copyright 2013 Prodrive B.V.
4 *
5 * Based on:
6 * MPC8548 CDS Device Tree Source (36-bit address map)
7 * Copyright 2012 Freescale Semiconductor Inc.
8 *
9 * This program is free software; you can redistribute  it and/or modify it
10 * under  the terms of  the GNU General  Public License as published by the
11 * Free Software Foundation;  either version 2 of the  License, or (at your
12 * option) any later version.
13 */
14
15/include/ "mpc8548si-pre.dtsi"
16
17/ {
18	model = "ppa8548";
19	compatible = "ppa8548";
20	#address-cells = <2>;
21	#size-cells = <2>;
22	interrupt-parent = <&mpic>;
23
24	memory {
25		device_type = "memory";
26		reg = <0 0 0x0 0x40000000>;
27	};
28
29	lbc: localbus@fe0005000 {
30		reg = <0xf 0xe0005000 0 0x1000>;
31		ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
32	};
33
34	soc: soc8548@fe0000000 {
35		ranges = <0 0xf 0xe0000000 0x100000>;
36	};
37
38	pci0: pci@fe0008000 {
39		/* ppa8548 board doesn't support PCI */
40		status = "disabled";
41	};
42
43	pci1: pci@fe0009000 {
44		/* ppa8548 board doesn't support PCI */
45		status = "disabled";
46	};
47
48	pci2: pcie@fe000a000 {
49		/* ppa8548 board doesn't support PCI */
50		status = "disabled";
51	};
52
53	rio: rapidio@fe00c0000 {
54		reg = <0xf 0xe00c0000 0x0 0x11000>;
55		port1 {
56			ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
57		};
58	};
59};
60
61&lbc {
62	nor@0 {
63		#address-cells = <1>;
64		#size-cells = <1>;
65		compatible = "cfi-flash";
66		reg = <0x0 0x0 0x00800000>;
67		bank-width = <2>;
68		device-width = <2>;
69
70		partition@0 {
71			reg = <0x0 0x7A0000>;
72			label = "user";
73		};
74
75		partition@7A0000 {
76			reg = <0x7A0000 0x20000>;
77			label = "env";
78			read-only;
79		};
80
81		partition@7C0000 {
82			reg = <0x7C0000 0x40000>;
83			label = "u-boot";
84			read-only;
85		};
86	};
87};
88
89&soc {
90	i2c@3000 {
91		rtc@6f {
92			compatible = "intersil,isl1208";
93			reg = <0x6f>;
94		};
95	};
96
97	i2c@3100 {
98	};
99
100	/*
101	 * Only ethernet controller @25000 and @26000 are used.
102	 * Use alias enet2 and enet3 for the remainig controllers,
103	 * to stay compatible with mpc8548si-pre.dtsi.
104	 */
105	enet2: ethernet@24000 {
106		status = "disabled";
107	};
108
109	mdio@24520 {
110		phy0: ethernet-phy@0 {
111			interrupts = <7 1 0 0>;
112			reg = <0x0>;
113		};
114		phy1: ethernet-phy@1 {
115			interrupts = <8 1 0 0>;
116			reg = <0x1>;
117		};
118		tbi0: tbi-phy@11 {
119			reg = <0x11>;
120			device_type = "tbi-phy";
121		};
122	};
123
124	enet0: ethernet@25000 {
125		tbi-handle = <&tbi1>;
126		phy-handle = <&phy0>;
127	};
128
129	mdio@25520 {
130		tbi1: tbi-phy@11 {
131			reg = <0x11>;
132			device_type = "tbi-phy";
133		};
134	};
135
136	enet1: ethernet@26000 {
137		tbi-handle = <&tbi2>;
138		phy-handle = <&phy1>;
139	};
140
141	mdio@26520 {
142		tbi2: tbi-phy@11 {
143			reg = <0x11>;
144			device_type = "tbi-phy";
145		};
146	};
147
148	enet3: ethernet@27000 {
149		status = "disabled";
150	};
151
152	mdio@27520 {
153		tbi3: tbi-phy@11 {
154			reg = <0x11>;
155			device_type = "tbi-phy";
156		};
157	};
158
159	crypto@30000 {
160		status = "disabled";
161	};
162};
163
164/include/ "mpc8548si-post.dtsi"
165